OBJECTIVE: To evaluate the dynamic changes of glucocorticoid (GC) dose and the feasibility of GC discontinuation in rheumatoid arthritis (RA) patients under the background of Chinese medicine (CM). METHODS: This multicenter retrospective cohort study included 1,196 RA patients enrolled in the China Rheumatoid Arthritis Registry of Patients with Chinese Medicine (CERTAIN) from September 1, 2019 to December 4, 2023, who initiated GC therapy. Participants were divided into the Western medicine (WM) and integrative medicine (IM, combination of CM and WM) groups based on medication regimen. Follow-up was performed at least every 3 months to assess dynamic changes in GC dose. Changes in GC dose were analyzed by generalized estimator equation, the probability of GC discontinuation was assessed using Kaplan-Meier curve, and predictors of GC discontinuation were analyzed by Cox regression. Patients with <12 months of follow-up were excluded for the sensitivity analysis. RESULTS: Among 1,196 patients (85.4% female; median age 56.4 years), 880 (73.6%) received IM. Over a median 12-month follow-up, 34.3% (410 cases) discontinued GC, with significantly higher rates in the IM group (40.8% vs. 16.1% in WM; P<0.05). GC dose declined progressively, with IM patients demonstrating faster reductions (median 3.75 mg vs. 5.00 mg in WM at 12 months; P<0.05). Multivariate Cox analysis identified age <60 years [P<0.001, hazard ratios (HR)=2.142, 95% confidence interval (CI): 1.523-3.012], IM therapy (P=0.001, HR=2.175, 95% CI: 1.369-3.456), baseline GC dose ⩽7.5 mg (P=0.003, HR=1.637, 95% CI: 1.177-2.275), and absence of non-steroidal anti-inflammatory drugs use (P=0.001, HR=2.546, 95% CI: 1.432-4.527) as significant predictors of GC discontinuation. Sensitivity analysis (545 cases) confirmed these findings. CONCLUSIONS RA patients receiving CM face difficulties in following guideline-recommended GC discontinuation protocols. IM can promote GC discontinuation and is a promising strategy to reduce GC dependency in RA management. (Trial registration: ClinicalTrials.gov, No. NCT05219214).
Adult ; Aged ; Female ; Humans ; Male ; Middle Aged ; Arthritis, Rheumatoid/drug therapy* ; Glucocorticoids/therapeutic use* ; Medicine, Chinese Traditional ; Retrospective Studies

Patients with severe trauma require an extremely timely treatment and transfusion plays an irreplaceable role in the emergency treatment of such patients. An increasing number of evidence-based medicinal evidences and clinical practices suggest that patients with severe traumatic bleeding benefit from early transfusion of low-titer group O whole blood or hemostatic resuscitation with red blood cells, plasma and platelet of a balanced ratio. However, the current domestic mode of blood supply cannot fully meet the requirements of timely and effective blood transfusion for emergency treatment of patients with severe trauma in clinical practice. In order to solve the key problems in blood supply and blood transfusion strategies for emergency treatment of severe trauma, Branch of Clinical Transfusion Medicine of Chinese Medical Association, Group for Trauma Emergency Care and Multiple Injuries of Trauma Branch of Chinese Medical Association, Young Scholar Group of Disaster Medicine Branch of Chinese Medical Association organized domestic experts of blood transfusion medicine and trauma treatment to jointly formulate Chinese expert consensus on blood support mode and blood transfusion strategies for emergency treatment of severe trauma patients ( version 2024). Based on the evidence-based medical evidence and Delphi method of expert consultation and voting, 10 recommendations were put forward from two aspects of blood support mode and transfusion strategies, aiming to provide a reference for transfusion resuscitation in the emergency treatment of severe trauma and further improve the success rate of treatment of patients with severe trauma.

This study evaluated the clinical effectiveness of Ruyi Zhenbao Pills in the treatment of osteoarthritis, aiming to clarify its clinical advantages and promote rational drug use and related policy transformation. Following the relevant standards in Guidelines for the Comprehensive Evaluation of Drugs in Clinical Practice and Technical Specifications for the Clinical Comprehensive Evaluation of Chinese Patent Medicine, comprehensive research and related data on Ruyi Zhenbao Pills in the treatment of osteoarthritis were collected in the dimensions of safety, effectiveness, economy, innovation, suitability, accessibility, and traditional Chinese medicine(TCM) cha-racteristics(referred to as the "6+1" dimensions). Through evidence-based medicine, questionnaire surveys, health technology assessment, pharmacoeconomic evaluation, and other methods, a multi-criteria decision analysis(MCDA) model and CSC v2.0 software were used to comprehensively evaluate the clinical value of Ruyi Zhenbao Pills. Spontaneous reporting system data on adverse reactions and literature data indicate that the adverse reactions of Ruyi Zhenbao Pills are mostly general adverse reactions, with no reports of se-rious adverse reactions. The known risks are small, and its safety is rated as class A. It has been shown to effectively relieve joint pain and restore joint function in the treatment of osteoarthritis. However, more high-quality, large-sample randomized controlled trials are needed to further validate its effectiveness, which is rated as class B. There is evidence supporting its economic viability, and its economic is rated as class B. It demonstrates good clinical innovation, innovative enterprise service system, and industrial innovation, and innovation is rated as class A. Medical professionals and patients have a favorable perception of the suitability of Ruyi Zhenbao Pills, and further improvement can be made in terms of convenience of administration and promotion to facilitate rational drug use by healthcare professionals and patients. Suitability is rated as class B. The drug has a favorable price level, availability, and affordability, and accessibility is rated as class A. Ruyi Zhenbao Pills are a classic Tibetan medicinal prescription with excellent TCM theoretical characteristics. However, further research is needed on its use in human studies. TCM characteristics are rated as class B. Based on the evaluation results of the "6+1" dimensions, the comprehensive clinical evaluation is rated as grade B. Ruyi Zhenbao Pills have good clinical value in the treatment of osteoarthritis, and it is recommended to undergo the necessary procedures for conditional transformation into a policy for the management of essential clinical drugs.
Humans ; Medicine, Chinese Traditional ; Reference Standards ; Nonprescription Drugs ; Drugs, Essential ; Osteoarthritis/drug therapy* ; Drugs, Chinese Herbal/adverse effects*

BACKGROUND: LY01005 (Goserelin acetate sustained-release microsphere injection) is a modified gonadotropin-releasing hormone (GnRH) agonist injected monthly. This phase III trial study aimed to evaluated the efficacy and safety of LY01005 in Chinese patients with prostate cancer. METHODS: We conducted a randomized controlled, open-label, non-inferiority trial across 49 sites in China. This study included 290 patients with prostate cancer who received either LY01005 or goserelin implants every 28 days for three injections. The primary efficacy endpoints were the percentage of patients with testosterone suppression ≤50 ng/dL at day 29 and the cumulative probability of testosterone ≤50 ng/dL from day 29 to 85. Non-inferiority was prespecified at a margin of -10%. Secondary endpoints included significant castration (≤20 ng/dL), testosterone surge within 72 h following repeated dosing, and changes in luteinizing hormone, follicle-stimulating hormone, and prostate specific antigen levels. RESULTS: On day 29, in the LY01005 and goserelin implant groups, testosterone concentrations fell below medical-castration levels in 99.3% (142/143) and 100% (140/140) of patients, respectively, with a difference of -0.7% (95% confidence interval [CI], -3.9% to 2.0%) between the two groups. The cumulative probabilities of maintaining castration from days 29 to 85 were 99.3% and 97.8%, respectively, with a between-group difference of 1.5% (95% CI, -1.3% to 4.4%). Both results met the criterion for non-inferiority. Secondary endpoints were similar between groups. Both treatments were well-tolerated. LY01005 was associated with fewer injection-site reactions than the goserelin implant (0% vs . 1.4% [2/145]). CONCLUSION: LY01005 is as effective as goserelin implants in reducing testosterone to castration levels, with a similar safety profile. TRIAL REGISTRATION ClinicalTrials.gov, NCT04563936.
Humans ; Male ; Antineoplastic Agents, Hormonal/therapeutic use* ; East Asian People ; Gonadotropin-Releasing Hormone/agonists* ; Goserelin/therapeutic use* ; Prostate-Specific Antigen ; Prostatic Neoplasms/drug therapy* ; Testosterone

Since the implementation of drug registration in China, the classification of Chinese medicine has greatly met the needs of public health and effectively guided the transformation, inheritance, and innovation of research achievements on traditional Chinese medicine(TCM). In the past 30 years, the development of new Chinese medicine has followed the registration transformation model of " one prescription for single drug". This model refers to the R&D and registration system of modern drugs, and approximates to the " law-abiding" medication method in TCM clinic, while it rarely reflects the sequential therapy of syndrome differentiation and comprehensive treatment with multiple measures. In 2017, Opinions on Deepening the Reform of Review and Approval System and Encouraging the Innovation of Drugs and Medical Devices released by the General Office of the CPC Central Committee and the General Office of the State Council pointed out that it is necessary to " establish and improve the registration and technical evaluation system in line with the characteristics of Chinese medicine, and handle the relationship between the traditional advantages of Chinese medicine and the requirements of modern drug research". Therefore, based on the development law and characteristics of TCM, clinical thinking should be highlighted in the current technical requirements and registration system of research and development of Chinese medicine. Based on the current situation of registration supervision of Chinese medicine and the modern drug research in China, the present study analyzed limitations and deficiency of " one prescription for single drug" in the research and development of Chinese medicine. Additionally, a new type of " series prescriptions" was proposed, which was consistent with clinical thinking and clinical reality. This study is expected to contribute to the independent innovation and high-quality development of the TCM industry.
China ; Drugs, Chinese Herbal/therapeutic use* ; Medicine, Chinese Traditional ; Prescriptions ; Public Health

OBJECTIVE: To assess the clinical efficacy of minimally invasive technology with trajectory screw fixation for fragility fractures of pelvic(FFP). METHODS: A retrospective case control study was performed to analyze the clinical data of 35 patients with FFP who were treated and followed up between January 2016 and December 2019. There were 12 males and 23 females, aged from 65 to 99 years with an average of(75.4±7.8) years old. There were 13 cases of type Ⅱb, 7 cases of type Ⅱc, 8 cases of type Ⅲa, 2 cases of type Ⅲb, 2 cases of type Ⅲc, 1 case of type Ⅳb, and 2 cases of type Ⅳc according to Rommens FFP comprehensive classification. All patients received the treatment of minimally invasive technology with trajectory screws fixation. According to the different methods of anterior pelvic ring fixation, FFP patients were divided into two groups:12 cases were fixed with the pedicle screw rod system in the anterior pelvic subcutaneous internal fixator (INFIX) group;23 cases were fixed with hollow screws of the pubic symphysis, superior ramus of pubis or acetabular anterior column in the screw group. The operation time, intraoperative blood loss, intraoperative fluoroscopy times, length of hospital stay, cost of internal fixation, pre- and post-operative visual analogue scale(VAS) were compared between the two groups. The fracture reduction quality was evaluated according to the Matta criteria, and the clinical function was evaluated by the Majeed functional scoring system respectively. RESULTS: All patients were followed up for 12 to 39(16.5±5.4) months after surgery. There was no statistically significant difference in the operation time, intraoperative blood loss, intraoperative fluoroscopy time, and length of hospital stay between the two groups(P>0.05). As for the cost of internal fixation, the cost of internal fixation in the screw group [2 914 (2 914, 4 371) yuan] was significantly lower than that of the INFIX group [6 205 (6 205, 6 205) yuan] (P<0.05). No significant difference was observed in the incidence of postoperative complications between the two groups (P>0.05). There was no significant difference in VAS assessment at admission, 1 week, and 3 months after surgery between the two groups(P>0.05). However, the VAS assessment at 1 week and 3 months after surgery of the two groups were significantly better than those at admission(P<0.05). There was no significant difference in the quality of fracture reduction after the operation and the efficacy evaluation at the last follow-up between the two groups(P>0.05). CONCLUSION For the treatment of fragility fractures, minimally invasive technology with trajectory screw fixation can achieve good clinical efficacy. It has the advantages of being relatively minimally invasive, less bleeding, relieving the pain. It deserves clinical application.
Aged ; Aged, 80 and over ; Blood Loss, Surgical ; Case-Control Studies ; Female ; Fractures, Bone/surgery* ; Humans ; Male ; Pelvic Bones/surgery* ; Retrospective Studies

Objective To investigate the current status of occupational hazards and prevention and control of occupational ， - Methods ， diseases in micro small and medium sized manufacturing enterprises in Jiangxi Province. A total of 1 034 micro - small and medium sized manufacturing enterprises in Jiangxi Province were selected as the research subjects using a stratified cluster sampling method. The exposure of occupational hazards and the implementation of occupational hazards prevention and Results ， control measures were investigated. Among the 1 034 enterprises the small and micro enterprises accounted for ， 91.5%. The enterprises with serious occupational hazards were mainly concentrated in metallurgy building materials industry ， and machinery equipment and electrical appliance manufacturing industry. The exposure rate of occupational hazard factors in ， ， （ vs the categories of occupational hazard factors from high to low was physical factors dust and chemical factors 78.9% 52.8% vs ，P ） （ ）， ， 25.0% <0.01 . The exposure rate from high to low was metallurgy and building materials industry 60.8% machinery （ ）， ， equipment and electrical equipment manufacturing industry 42.9% light industry textile and tobacco processing industry （ ）， ， （ ）（P ） 32.0% chemical petrochemical and pharmaceutical industry 21.0% <0.01 . Noise exposure accounted for 98.3% in the workers exposed to physical factors. The implementation rate of prevention and control measures for occupational hazards ， in enterprises from high to low was the staffing of occupational health management personnel the establishment of ， ， occupational health management institutions the establishment of occupational health management systems the detection ， ， of occupational hazards the evaluation of the control effect of occupational hazards of construction projects and the - （ vs vs vs vs vs ，P ） pre evaluation of occupational hazards of construction projects 32.5% 25.7% 23.7% 16.2% 6.9% 4.2% <0.01 . Conclusion The focus of prevention and control of occupational hazards in manufacturing industry in Jiangxi Province is noise ， - and dust in small and micro metallurgy and building materials industry. Most of the micro small and medium sized manufacturing enterprises have not carried out the detection of occupational hazards and evaluation of occupational hazards in accordance with the law. The situation of occupational disease prevention and control is still challenging.

Objective To investigate the current status of occupational hazards and prevention and control of occupational ， - Methods ， diseases in micro small and medium sized manufacturing enterprises in Jiangxi Province. A total of 1 034 micro - small and medium sized manufacturing enterprises in Jiangxi Province were selected as the research subjects using a stratified cluster sampling method. The exposure of occupational hazards and the implementation of occupational hazards prevention and Results ， control measures were investigated. Among the 1 034 enterprises the small and micro enterprises accounted for ， 91.5%. The enterprises with serious occupational hazards were mainly concentrated in metallurgy building materials industry ， and machinery equipment and electrical appliance manufacturing industry. The exposure rate of occupational hazard factors in ， ， （ vs the categories of occupational hazard factors from high to low was physical factors dust and chemical factors 78.9% 52.8% vs ，P ） （ ）， ， 25.0% <0.01 . The exposure rate from high to low was metallurgy and building materials industry 60.8% machinery （ ）， ， equipment and electrical equipment manufacturing industry 42.9% light industry textile and tobacco processing industry （ ）， ， （ ）（P ） 32.0% chemical petrochemical and pharmaceutical industry 21.0% <0.01 . Noise exposure accounted for 98.3% in the workers exposed to physical factors. The implementation rate of prevention and control measures for occupational hazards ， in enterprises from high to low was the staffing of occupational health management personnel the establishment of ， ， occupational health management institutions the establishment of occupational health management systems the detection ， ， of occupational hazards the evaluation of the control effect of occupational hazards of construction projects and the - （ vs vs vs vs vs ，P ） pre evaluation of occupational hazards of construction projects 32.5% 25.7% 23.7% 16.2% 6.9% 4.2% <0.01 . Conclusion The focus of prevention and control of occupational hazards in manufacturing industry in Jiangxi Province is noise ， - and dust in small and micro metallurgy and building materials industry. Most of the micro small and medium sized manufacturing enterprises have not carried out the detection of occupational hazards and evaluation of occupational hazards in accordance with the law. The situation of occupational disease prevention and control is still challenging.

OBJECTIVE: To investigate the clinical effect of subchondral blocking technique combined with plate and screw biplane fixation in the treatment of complex acetabular posterior wall fractures. METHODS: From July 2015 to December 2019, a total of 47 cases of acetabular posterior wall fractures were treated. According to the different internal fixation techniques, they were divided into the external blocking fixation group supported by lateral plate and screw(control group of 23 cases) and the subchondral blocking technique combined with lateral plate and screw support biplane fixation group(study group of 24 cases). In the control group, there were 15 males and 8 females, aged 18 to 68 years old with an average of (40.9±7.2) years;preoperative preparation was 4 to 13 days with an average of (7.9±1.5) days. In the study group, there were 14 males and 10 females, aged 20 to 71 years old with an average of (41.7±7.9) years;preoperative preparation was 4 to 12 days with an average of (7.5±1.9) days. Kocher-Langenbeck approach was used in both groups and all patients were followed up for at least 1 year. The operation time, intraoperative blood loss, hospitalization time, quality of fracture reduction after operation, modified Merle D'Aubigne Postel score of hip joint one year after operation and postoperative complication rate of two groups were statistically analyzed and compared. RESULTS: The patients in both groups were followed up for at least 1 year. One year after operation, the Merled'Aubigne Postel score(16.042±1.517) of hip function improvement in the study group was significantly higher than that in the control group (14.696±1.222)(P<0.05). There was no significant difference in operation time and intraoperative bleeding between the two groups(P>0.05). One year after operation, there was a significant difference between two groups in the evaluation results of Matta fracture reduction quality(P<0.05). There was no significant difference in postoperative complications between two groups(P>0.05). CONCLUSION The treatment of complex acetabular posterior wall fracture with subchondral blocking technique combined with plate and screw biplane fixation technique has lower postoperative complication rate, better functional recovery of hip joint and satisfactory clinical effect.
Male ; Female ; Humans ; Adolescent ; Young Adult ; Adult ; Middle Aged ; Aged ; Acetabulum/injuries* ; Bone Screws ; Hip Fractures/surgery* ; Spinal Fractures ; Treatment Outcome ; Postoperative Complications

Abstract: Objective To analyze the occupational hazards of enterprises in Pingshan district of Shenzhen in 2017. Methods Occupational hazards were analyzed in 200 enterprises in Pingshan district of Shenzhen City selected using stratified Results random sampling method. A total of 24 industries were involved in the 200 enterprises. The declaration rate of ， occupational hazards was 91.5% and the exposure rate of occupational hazards among workers was 49.2%. The regular monitoring rate of occupational hazard factors in workplaces of the enterprises was 79.5%. There were 129 kinds of occupational ， ， hazard factors of which 19 factors exceeded the national occupational exposure limit accounting for 14.7%. The over standard ， ， ， ， ， ， ， ， rates of noise silica dust cotton dust methanol toluene and other dust were 28.7% 13.6% 11.8% 5.86% 0.5% and ， ， 0.4% respectively. There were 13 kinds of occupational hazard factors in the workplace of metal products industry all of which （ ） exceeded the occupational exposure limit. The exposure rate 56.7% of occupational hazard factors in workers was the highest. Conclusion ， ， The main occupational hazard factors were noise dust and chemical factor and the major occupational hazard industry was metal manufacturing in Pingshan district of Shenzhen City.