In 1958, Jackson first reported on the use of proximal tibial osteotomy in the treatment of pain due to osteoarthritis of the knee joint. Subsequently, various osteotomy techniques have been reported. The varus deformity of the knee associated with osteoarthritis can be corrected by realigning the joint and thereby shifting the line of weight bearing to the compartment with preserved articular cartilage. This procedure has been found to relieve pain, improve function and arrest the progress of the condition. Twenty five cases of genu varum associated with osteoarthritis were treated by high tibial osteotomy at Dept. of O.S., Seoul National University Hospital, from July 1976 to June 1983. And the following results were obtained. 1. In a review of 25 high tibial osteotomies, excellent and good results were noted in 80% of the knees after average follow-up 2.9 years. 2. Postoperative valgus angles, ranging from 5° to 20°, were averaged to be 10.8°. 3. Though some authors indicate the obesity as one of risk factors, we obtained satisfactory results in 25 knees of obese patients.
Cartilage, Articular ; Congenital Abnormalities ; Follow-Up Studies ; Genu Varum ; Humans ; Joints ; Knee ; Knee Joint ; Obesity ; Osteoarthritis ; Osteotomy ; Risk Factors ; Seoul ; Weight-Bearing

The most common fracture about the elbow joint in chilren is a supracondylar fracture. The displaced fracture is difficult to manage due to the potential danger of Volkmann's ischemia, nerve injury, and malunion, During the period of 6 years from June, 1979 to June, 1985, 63 children with supracondylar fractures of the humerus were treated at Pusan Paik Hospital, Inje Medical College, and analyzed. The results are summarized as follows: 1. The average age was 7.1 years, ranged from 1 year to 14 years, and the male and female ratio was 2.5: l. 2. In type of fracture, extension type was 92% and flexion type was 8%. In displacement of fracture, Grade I was only 2 cases, Grade III and IV were 87.3%. Posteromedial displacement was 42.8% (27 cases). 3. At the time of admission, 15cases(23.8%) accompanied nerve injury, of these median nerve injury (9 cases) was most common. All the patient with nerve injury were completely recovered within 14 months after reduction. 4. Severe cubitus varus was 14.2%, and severe limitation of elbow motion was 1.6%. 5. Of 61 displaced fractures, 37 patients were treated with closed reduction and percutaneous pin fixation. By Flynn's criteria, satisfactory results were obtained in 36 of the 37 patients(97.3%) treated with percutaneous pinning. 6. In the displaced fractures, closed reduction and percutaneous pinning is a satisfactory method for obtaining and maintaining reduction while preserving vascular function, if acute flexion is necessary for stable reduction.
Busan ; Child ; Clinical Study ; Elbow ; Elbow Joint ; Female ; Fractures, Closed ; Humans ; Humerus ; Ischemia ; Male ; Median Nerve ; Methods

No abstract available.

BACKGROUND: This study was conducted to reveal the health effects of air pollution on the residents living near waste treatment plant. METHODS: We sampled 190 residents as the hogh exposed group, 192 residents as the moderate group, and 139 residents as the low exposed group according to the geographical distances from the waste treatment plant. Self-administered questionnaires for prevalence of respiratory disease, irritation symptoms of mucous membrane (eye, nose, thoat, skin, and respiratory tract), gastrointestinal symptoms, other nonspecific symptoms were conducted. We measured the concentrations of total suspened partcles, Zn, Cu, Cr, Ni, Pb, Cd and As in 3 exposed area. RESULT: Airborne concentrations of total suspended particles measured in exposed area were 485, 365, and 332 micro gram/m(3) which excees the limit value. Airborne concentrations of Zn, Cu, Cr, Ni, Pb, Cd and As were not excees the limit value. The prevalence of respiratory disease of high exposed group (16.8%) was significantly higher than that of moderate group (3.6%) and low exposed group (5.0%). The sysptom score of irrtation sysptoms of mucous membrane, gastrointestinal sysptoms, and other nonspecific sysptoms were increased with exposed level. In multiple linear regression, exposure level was related to all sysptom scores significantly. CONCLUSION: These results suggest that the air pollution of waste treatment plant would influence prevalence of respiratory disease, induce irritation of mucous membrane, gastrointestinal symptoms, and other nonspecific sysptoms.
Air Pollution ; Linear Models ; Mucous Membrane ; Nose ; Plants* ; Prevalence ; Skin ; Surveys and Questionnaires

No abstract available.
Citrobacter freundii* ; Citrobacter* ; Osteomyelitis*

No abstract available.
Citrobacter freundii* ; Citrobacter* ; Osteomyelitis*

Objective: Precise knowledge regarding the mechanical stress applied to the intervertebral disc following each individual spine motion enables physicians and patients to understand how people with discogenic back pain should be guided in their exercises and which spine motions to specifically avoid. We created an intervertebral disc degeneration model and conducted a finite element (FE) analysis of loaded stresses following each spinal posture or motion. Methods: A 3-dimensional FE model of intervertebral disc degeneration at L4–5 was constructed. The intervertebral disc degeneration model was created according to the modified Dallas discogram scale. The von Mises stress and range of motion (ROM) regarding the intervertebral discs and the endplates were analyzed. Results: We observed that mechanical stresses loaded onto the intervertebral discs were similar during flexion, extension, and lateral bending, which were greater than those occurring during torsion. Based on the comparison among the grades divided by the modified Dallas discogram scale, the mechanical stress during extension was greater in grades 3–5 than it was during the others. During extension, the mechanical stress loaded onto the intervertebral disc and endplate was greatest in the posterior portion. Mechanical stresses loaded onto the intervertebral disc were greater in grades 3–5 compared to those in grades 0–2. Conclusion Our findings suggest that it might be beneficial for patients experiencing discogenic back pain to maintain a neutral posture in their lumbar spine when engaging in daily activities and exercises, especially those suffering from significant intravertebral disc degeneration.

Objective: Precise knowledge regarding the mechanical stress applied to the intervertebral disc following each individual spine motion enables physicians and patients to understand how people with discogenic back pain should be guided in their exercises and which spine motions to specifically avoid. We created an intervertebral disc degeneration model and conducted a finite element (FE) analysis of loaded stresses following each spinal posture or motion. Methods: A 3-dimensional FE model of intervertebral disc degeneration at L4–5 was constructed. The intervertebral disc degeneration model was created according to the modified Dallas discogram scale. The von Mises stress and range of motion (ROM) regarding the intervertebral discs and the endplates were analyzed. Results: We observed that mechanical stresses loaded onto the intervertebral discs were similar during flexion, extension, and lateral bending, which were greater than those occurring during torsion. Based on the comparison among the grades divided by the modified Dallas discogram scale, the mechanical stress during extension was greater in grades 3–5 than it was during the others. During extension, the mechanical stress loaded onto the intervertebral disc and endplate was greatest in the posterior portion. Mechanical stresses loaded onto the intervertebral disc were greater in grades 3–5 compared to those in grades 0–2. Conclusion Our findings suggest that it might be beneficial for patients experiencing discogenic back pain to maintain a neutral posture in their lumbar spine when engaging in daily activities and exercises, especially those suffering from significant intravertebral disc degeneration.

Objective: Precise knowledge regarding the mechanical stress applied to the intervertebral disc following each individual spine motion enables physicians and patients to understand how people with discogenic back pain should be guided in their exercises and which spine motions to specifically avoid. We created an intervertebral disc degeneration model and conducted a finite element (FE) analysis of loaded stresses following each spinal posture or motion. Methods: A 3-dimensional FE model of intervertebral disc degeneration at L4–5 was constructed. The intervertebral disc degeneration model was created according to the modified Dallas discogram scale. The von Mises stress and range of motion (ROM) regarding the intervertebral discs and the endplates were analyzed. Results: We observed that mechanical stresses loaded onto the intervertebral discs were similar during flexion, extension, and lateral bending, which were greater than those occurring during torsion. Based on the comparison among the grades divided by the modified Dallas discogram scale, the mechanical stress during extension was greater in grades 3–5 than it was during the others. During extension, the mechanical stress loaded onto the intervertebral disc and endplate was greatest in the posterior portion. Mechanical stresses loaded onto the intervertebral disc were greater in grades 3–5 compared to those in grades 0–2. Conclusion Our findings suggest that it might be beneficial for patients experiencing discogenic back pain to maintain a neutral posture in their lumbar spine when engaging in daily activities and exercises, especially those suffering from significant intravertebral disc degeneration.

Objective: Precise knowledge regarding the mechanical stress applied to the intervertebral disc following each individual spine motion enables physicians and patients to understand how people with discogenic back pain should be guided in their exercises and which spine motions to specifically avoid. We created an intervertebral disc degeneration model and conducted a finite element (FE) analysis of loaded stresses following each spinal posture or motion. Methods: A 3-dimensional FE model of intervertebral disc degeneration at L4–5 was constructed. The intervertebral disc degeneration model was created according to the modified Dallas discogram scale. The von Mises stress and range of motion (ROM) regarding the intervertebral discs and the endplates were analyzed. Results: We observed that mechanical stresses loaded onto the intervertebral discs were similar during flexion, extension, and lateral bending, which were greater than those occurring during torsion. Based on the comparison among the grades divided by the modified Dallas discogram scale, the mechanical stress during extension was greater in grades 3–5 than it was during the others. During extension, the mechanical stress loaded onto the intervertebral disc and endplate was greatest in the posterior portion. Mechanical stresses loaded onto the intervertebral disc were greater in grades 3–5 compared to those in grades 0–2. Conclusion Our findings suggest that it might be beneficial for patients experiencing discogenic back pain to maintain a neutral posture in their lumbar spine when engaging in daily activities and exercises, especially those suffering from significant intravertebral disc degeneration.