Education, Dental ; Michigan ; Universities

The record of radiation therapy cases during a five-ear period at the University of Michigan Hospitals has been analyzed. Of a total of 73 Aden carcinoma of prostate, the majority belonged to Stage B and C which represented 49 and 20 cases, respectively. The mortality rate after irradiation was clearly related to the tumor stage. Local irradiation resulted in 88% of the local control of well-ifferentiated Aden carcinomas. Stage C cases had 50% mortality, whereas that of Stage B patients was 14%. Results of this study are in general agreement with previous data in terms of the local disease control after irradiation and provide a basis for conservative radiotherapy regimen as an approach in the treatment of localized prostatic carcinomas.
Humans ; Michigan ; Mortality ; Prostate* ; Radiotherapy ; Yemen*

Compared to their terrestrial and marine counterparts, little is known about the capacity of freshwater-derived actinomycete bacteria to produce novel secondary metabolites. In the current study, we highlight the disparities that exist between cultivation-independent and -dependent analyses of actinomycete communities from four locations in Lake Michigan sediment. Furthermore, through phylogenetic analysis of strains isolated from these locations, we identified a Streptomyces sp., strain B025, as being distinct from other Streptomyces spp. isolated from sediment. Upon fermentation this strain produced a rare class of eight-membered lactone secondary metabolites, which have been for their antitumor properties. We used spectroscopic and chemical derivitization techniques to characterize octalactin B (1) in addition to its corresponding novel, unnatural degradation product (2).
Bacteria ; Fermentation ; Fresh Water ; Lakes ; Michigan ; Streptomyces*

STATEMENT OF PROBLEM: Elastomeric impression materials have been widely used to obtain an accurate impression. However there have not been enough studies on the influence of the thickness of the tray adhesives on the bonding strength between the trays and the elastomeric impression materials. PURPOSE: In order to understand the relationship between the thickness of the tray adhesive and the tensile bond strength and to suggest the thickness at which the bonding strength is strongest, tensile bond strength related to the thickness of adhesives of 3 different elastomeric impression materials were tested. MATERIALS AND METHODS: 3 impression materials, Permlastic(R) Regular Set(Kerr Corp., Romulus, Michigan, U.S.A.), Impregum(TM) Penta(TM)(3M ESPE, Seefeld, Germany), and Aquasil Ultra Monophase Regular Set Smart Wetting(R) (Dentsply Caulk, Milford, Delaware, U.S.A.), were used in this study, and tray adhesives from the same manufacturers of the impression materials were used, which were Rubber Base Adhesive, Polyether Adhesive, and Silfix, respectively. The tray specimens were prepared by autopolymerizing the tray material(Instant Tray Mix, Lang, Wheeling, Illinois, U.S.A.), and a PVC pipe was used to house the impression material. In group A, tray adhesives were applied in multiple thin layers of 1 to 5 and in group B, adhesives were applied only once, in the thickness equivalent to several applications. Lightness(L*) of the adhesion surface was measured with a spectrophotometer (CM-3500d, Konica Minolta, Sakai, Osaka, Japan). The tensile bond strength of the elastomeric impression material and the tray resin was measured with universal materials testing machines(Instron, Model 3366, Instron Corp, Nowood, Massachusetts, U.S.A.). A formula between the number of adhesive application layers and the lightness of the adhesion surface was deduced in group A, and the number of adhesive layers in group B was estimated by applying the lightness(L*) to the deduced formula. RESULTS: 1. In group A, a statistically significant increase in tensile bond strength appeared when the number of application layers increased from 1 to 2 and from 4 to 5, and no significant difference was present between 2, 3, and 4 layers in Permlastic. In Impregum, the tensile bond strength was significantly increased when the number of adhesive layers increased from 1 to 3, but no significant difference after 3 layers. In Aquasil, the tensile bond strength significantly increased as the number of application layers increased up to 4 but showed no significant difference between 4 and 5. 2. In group B, the tensile bond strength was decreased when the thickness of the adhesive increased in Permlastic. Impregum showed an increased tensile bond strength when the thickness of the adhesive was increased. In Aquasil, the tensile bond strength increased as the number of adhesive application layers increased up to approximately 2.5 layers but it sharply decreased after approximately 4.5. CONCLUSION: From the study, the common idea that it is better to apply a thin and single coat of tray adhesive needs correction in more detailed ways, and instructions on some of the tray adhesives should be reconsidered since there were several cases in which the tensile bond strength increased according to the increase in the thickness of the adhesives.
Adhesives* ; Delaware ; Elastomers* ; Illinois ; Massachusetts ; Materials Testing ; Michigan ; Rubber

A Brain-Machine interface (BMI) allows for direct communication between the brain and machines. Neural probes for recording neural signals are among the essential components of a BMI system. In this report, we review research regarding implantable neural probes and their applications to BMIs. We first discuss conventional neural probes such as the tetrode, Utah array, Michigan probe, and electroencephalography (ECoG), following which we cover advancements in next-generation neural probes. These next-generation probes are associated with improvements in electrical properties, mechanical durability, biocompatibility, and offer a high degree of freedom in practical settings. Specifically, we focus on three key topics: (1) novel implantable neural probes that decrease the level of invasiveness without sacrificing performance, (2) multi-modal neural probes that measure both electrical and optical signals, (3) and neural probes developed using advanced materials. Because safety and precision are critical for practical applications of BMI systems, future studies should aim to enhance these properties when developing next-generation neural probes.
Brain ; Brain-Computer Interfaces* ; Electroencephalography ; Freedom ; Michigan ; Utah

Michigan, Oral and Maxillofacial Surgery.]]>
Fibula ; Mandible ; Mandibular Reconstruction ; Michigan ; Operative Time ; Osteotomy ; Surgery, Oral

Segmentation of fundamental heart sounds–S1 and S2 is important for automated monitoring of cardiac activity including diagnosis of the heart diseases. This pa-per proposes a novel hybrid method for S1 and S2 heart sound segmentation using group sparsity denoising and variation mode decomposition (VMD) technique. In the proposed method, the measured phonocardiogram (PCG) signals are denoised using group sparsity algorithm by exploiting the group sparse (GS) property of PCG signals. The denoised GS-PCG signals are then decomposed into subsequent modes with specific spectral characteristics using VMD algorithm. The appropriate mode for further processing is selected based on mode central frequencies and mode energy. It is then followed by the extraction of Hilbert envelope (HEnv) and a thresholding on the selected mode to segment S1 and S2 heart sounds. The performance advantage of the proposed method is verified using PCG signals from benchmark databases namely eGeneralMedical, Littmann, Washington, and Michigan. The proposed hybrid algorithm has achieved a sensitivity of 100%, positive predictivity of 98%, accuracy of 98% and detection error rate of 1.5%. The promising results obtained suggest that proposed approach can be considered for automated heart sound segmentation.
Benchmarking ; Diagnosis ; Heart Diseases ; Heart Sounds ; Heart ; Methods ; Michigan ; Washington

PURPOSE: To compare the surgical results and complications of medial wall fracture reconstruction using non-absorbable porous polyethylene implants (Medpor(R), Stryker Instruments, Kalamazoo, Michigan, USA) and an absorbable polymer of polyglycolic acid (PGA) and polylactic acid (PLA) (Mesh plate(R), Inion Ltd, Tampere, Finland). METHODS: We retrospectively reviewed the data of patients who underwent reconstruction of medial wall fracture between January 2007 and June 2012 and divided them into 2 groups according to orbital implant type (Medpor(R), Mesh plate(R)). RESULTS: Among the 86 patients, 37 were treated with Medpor(R) and 49 with Mesh plate(R). There was no statistically significant difference in limitation of motion or diplopia score between the 2 groups at postoperative 6 months (Fisher's exact test, p = 0.192, p = 0.128, respectively). Mean postoperative exophthalmometry differences between the eyes were 0.49 +/- 1.04 mm and 0.37 +/- 0.62 mm in Medpor(R) and Mesh plate(R) groups, respectively, showing no statistically significant difference (independent t-test, p = 0.512). Postoperative complications such as inflammation or implant malposition were observed only in 3 patients in the Medpor(R) group. CONCLUSIONS: No difference was observed between Medpor(R) and Mesh plate(R) in terms of surgical results during the postoperative 6 month period after reconstruction of orbital medial wall fracture. However, postoperative complications were observed in 3 patients in the Medpor(R) group.
Diplopia ; Humans ; Inflammation ; Michigan ; Orbit* ; Orbital Implants* ; Polyethylene ; Polyglycolic Acid ; Polymers ; Postoperative Complications ; Retrospective Studies

PURPOSE: To compare the surgical results and complications of medial wall fracture reconstruction using non-absorbable porous polyethylene implants (Medpor(R), Stryker Instruments, Kalamazoo, Michigan, USA) and an absorbable polymer of polyglycolic acid (PGA) and polylactic acid (PLA) (Mesh plate(R), Inion Ltd, Tampere, Finland). METHODS: We retrospectively reviewed the data of patients who underwent reconstruction of medial wall fracture between January 2007 and June 2012 and divided them into 2 groups according to orbital implant type (Medpor(R), Mesh plate(R)). RESULTS: Among the 86 patients, 37 were treated with Medpor(R) and 49 with Mesh plate(R). There was no statistically significant difference in limitation of motion or diplopia score between the 2 groups at postoperative 6 months (Fisher's exact test, p = 0.192, p = 0.128, respectively). Mean postoperative exophthalmometry differences between the eyes were 0.49 +/- 1.04 mm and 0.37 +/- 0.62 mm in Medpor(R) and Mesh plate(R) groups, respectively, showing no statistically significant difference (independent t-test, p = 0.512). Postoperative complications such as inflammation or implant malposition were observed only in 3 patients in the Medpor(R) group. CONCLUSIONS: No difference was observed between Medpor(R) and Mesh plate(R) in terms of surgical results during the postoperative 6 month period after reconstruction of orbital medial wall fracture. However, postoperative complications were observed in 3 patients in the Medpor(R) group.
Diplopia ; Humans ; Inflammation ; Michigan ; Orbit* ; Orbital Implants* ; Polyethylene ; Polyglycolic Acid ; Polymers ; Postoperative Complications ; Retrospective Studies

Using a paradigm similar to the one employed by Crowe et al., this study was undertaken to determine the genetic characteristics of multiple neurofibromatosis in Korean people. Thirty three subjects were used in this study. All subjects were identified through an exarnination of the records of all patients who had visited the Department of Dermatology of Chonnam Medical University Hospital between 1967 and 1976. Relatives of subjects were examined whenever possible, The results of the study projected that the total number of persons in Chonriarn Province afflicted with multiple neurofibromatosis lies sornewhere between 880 and 16,500. Crowe estimated that between 2500 and 3300 patients could be found on Michigans lower peninsula. Sixty percent of this studys subjects presented as sporadic patients, a condition thought to be the resu.lt of a genetic mutation. They had no blood relatives who demonstrated the disease. Fifty percent of Crowes subject were found to be sporadic patients, and a similar study by a Japanese investigator revealed a sporadic patient rate of sixty percent. In this study, the rernaininp 40% of the subject group conformed to the expected genetic frequency, thus pointing toward the fact that rnultiple neurofibrornatosis is a highly penetrant autosomal dorninant disease. This was demonstrted by the fact that, of the 79 offspring bad by this group, 82 persons demonstrated multiple neurofibromatosis. This study also suggested somatic mutation in 3 of the 20 sporadic patients. Because this nutation did not occur at the germinal level, the patient is much less likely to transmit this disease to his offspring, One patient showed the usual clinical and family traits but the chromosome analysis was negative. Genetic issues associated with multiple neurofibromatosis are also discussed in this sturly.
Asian Continental Ancestry Group ; Crows ; Dermatology ; Humans ; Jeollanam-do ; Michigan ; Neurofibromatoses* ; Research Personnel