Wound repair is a common clinical problem, which seriously affects the quality of life of patients and also brings a heavy burden to the society. Hydrogel-based multifunctional dressing has shown strong potential in the treatment of acute and chronic wounds. In addition to its good histocompatibility, cell adhesion, and biodegradability, methacrylic anhydride gelatin (GelMA) hydrogel has also attracted much attention due to its low cost, mild reaction conditions, adjustable physicochemical properties, and wide clinical applications. In this paper, the characteristics of GelMA hydrogel and its research progress in wound repair are introduced, and the future development of multifunctional GelMA hydrogel dressing for wound treatment is prospected.
Humans ; Gelatin/chemistry* ; Hydrogels ; Anhydrides ; Quality of Life ; Methacrylates/chemistry*

Biofilms at the tooth-restoration bonded interface can produce acids and cause recurrent caries. Recurrent caries is a primary reason for restoration failures. The objectives of this study were to synthesize a novel bioactive dental bonding agent containing dimethylaminohexadecyl methacrylate (DMAHDM) and 2-methacryloyloxyethyl phosphorylcholine (MPC) to inhibit biofilm formation at the tooth-restoration margin and to investigate the effects of water-aging for 6 months on the dentin bond strength and protein-repellent and antibacterial durability. A protein-repellent agent (MPC) and antibacterial agent (DMAHDM) were added to a Scotchbond multi-purpose (SBMP) primer and adhesive. Specimens were stored in water at 37 °C for 1, 30, 90, or 180 days (d). At the end of each time period, the dentin bond strength and protein-repellent and antibacterial properties were evaluated. Protein attachment onto resin specimens was measured by the micro-bicinchoninic acid approach. A dental plaque microcosm biofilm model was used to test the biofilm response. The SBMP + MPC + DMAHDM group showed no decline in dentin bond strength after water-aging for 6 months, which was significantly higher than that of the control (P < 0.05). The SBMP + MPC + DMAHDM group had protein adhesion that was only 1/20 of that of the SBMP control (P < 0.05). Incorporation of MPC and DMAHDM into SBMP provided a synergistic effect on biofilm reduction. The antibacterial effect and resistance to protein adsorption exhibited no decrease from 1 to 180 d (P > 0.1). In conclusion, a bonding agent with MPC and DMAHDM achieved a durable dentin bond strength and long-term resistance to proteins and oral bacteria. The novel dental bonding agent is promising for applications in preventive and restorative dentistry to reduce biofilm formation at the tooth-restoration margin.
Anti-Infective Agents ; chemistry ; pharmacology ; Biofilms ; drug effects ; Dental Bonding ; Dentin-Bonding Agents ; chemistry ; pharmacology ; Materials Testing ; Methacrylates ; chemistry ; pharmacology ; Phosphorylcholine ; analogs & derivatives ; chemistry ; pharmacology ; Resin Cements ; Shear Strength ; Surface Properties ; Water

OBJECTIVEThis paper aimed to review the current literature on the surface modification of intraocular lenses (IOLs).

DATA SOURCESAll articles about surface modification of IOLs published up to 2015 were identified through a literature search on both PubMed and ScienceDirect.

STUDY SELECTIONThe articles on the surface modification of IOLs were included, but those on design modification and surface coating were excluded.

RESULTSTechnology of surface modification included plasma, ion beam, layer-by-layer self-assembly, ultraviolet radiation, and ozone. The main molecules introduced into IOLs surface were poly (ethylene glycol), polyhedral oligomeric silsesquioxane, 2-methacryloyloxyethyl phosphorylcholine, TiO 2 , heparin, F-heparin, titanium, titanium nitride, vinyl pyrrolidone, and inhibitors of cytokines. The surface modification either resulted in a more hydrophobic lens, a more hydrophilic lens, or a lens with a hydrophilic anterior and hydrophobic posterior surface. Advances in research regarding surface modification of IOLs had led to a better biocompatibility in both in vitro and animal experiments.

CONCLUSIONThe surface modification is an efficient, convenient, economic and promising method to improve the biocompatibility of IOLs.

Animals ; Heparin ; chemistry ; Humans ; Hydrophobic and Hydrophilic Interactions ; Lenses, Intraocular ; Methacrylates ; chemistry ; Ozone ; chemistry ; Phosphorylcholine ; analogs & derivatives ; chemistry ; Ultraviolet Rays

OBJECTIVETo evaluate the effect of 2-methacryloyloxyethyl phosphorylcholine (MPC) and nanoparticles of amorphous calcium phosphate (NACP) on the protein-repellent property of dental adhesive.

METHODSMPC and NACP were incorporated into SBMP as the test group. Scotchbond Multi-Purpose (SBMP) was used as control group. Human dentin shear bond strengths were measured. Protein adsorption onto samples was determined by micro bicinchoninic acid (BCA) method. A dental plaque microcosm biofilm model with human saliva as inoculum was used to investigate biofilm viability.

RESULTSThe dentin bond strength of modified group was (28.7±2.2) MPa, which was not significantly different from that of the SBMP control group. The amount of protein adsorption in the modified group and the SBMP control group were (0.21±0.02) µg/cm(2) and (4.17±0.45) µg/cm(2) respectively. Lactic acid production of biofilms in modified group and SBMP control were (7.71 ± 1.01) mmol/L and (19.18 ± 2.34) mmol/L repectively.

CONCLUSIONSMPC-NACP based dental adhesive greatly reduce the protein adsorption and bacterial adhesion, without compromising dentin shear bond strength. This novel bonding agent may have wide application.

Adsorption ; Biofilms ; drug effects ; growth & development ; Calcium Phosphates ; pharmacology ; Dental Cements ; pharmacology ; Dental Plaque ; Dentin ; chemistry ; Humans ; Lactic Acid ; biosynthesis ; Methacrylates ; pharmacology ; Nanoparticles ; Phosphorylcholine ; analogs & derivatives ; pharmacology ; Resin Cements ; pharmacology ; Saliva ; Tensile Strength

OBJECTIVETo investigate the effect of epigallocatechin-3-gallate (EGCG) on biomodification of demineralized dentine substrate, in its permeability, hydrophobicity, and inhibition ability to collagen enzymatic degradation.

METHODSThe dentine substrates were treated with simulated pulpal pressure created by mixtures of 0.02%, 0.1% EGCG/bovine serum albumin (BSA) in acidic environment (pH4.4) for 48 h. A fluid-transport model was used to measure the fluid permeability through demineralized dentine substrate. Positive replicas of dentine substrate were fabricated before and after being subjected to acidic environment for scanning electron microscope (SEM) examination. The blank group contained no EGCG and the positive group were treated with Gluma desensitizer. Static contact angle measurements on demineralized dentin and 0.1% EGCG primed dentin were performed by contact angle analyzer. The priming time were 60 s, 120 s, 0.5 h, 1 h. Dentine specimens bonded with Adper single bond 2 were subjected to 100 mg/L collagenase and observed under SEM. Resin-bonded specimens (with 0.02%, 0.1%, 0.5% EGCG priming, or without EGCG priming) were created for micro-tensile bond strength evaluation (MTBS). Resin-bonded specimens after thermol cycling were created for MTBS evaluation.

RESULTSThe fluid permeability in the blank control group increased ([151.3±22.3]%), the fluid permeability in 0.1% EGCG/BSA group decreased ([23.7±6.3]%). Compared to the blank control group, the contact angle of 120 s, 0.5 h, 1 h groups increased by 31.0%, 53.5%, 57.8% in deep dentin and 37.4%, 59.3%, 62.4% in shallow dentin. The SEM examination showed that 0.1% and 0.5% EGCG priming for 120 s significantly increased dentin collagen's resistance to collagenase. The immediate MTBS of 0.1% and 0.5% EGCG groups were (29.4±4.8) and (19.8± 4.9) MPa. After thermol cycling, the MTBS of 0.1% and 0.5% EGCG groups were (19.9±5.1) and (15.3± 6.3) MPa.

CONCLUSIONSUnder acidic environment (pH4.4), the 0.1% EGCG can reduce dentine permeability under acidic environment. The 0.1% EGCG can increase hydrophobicity of dentin substrate, and strengthen dentin substrate's resistance to collagenase hydrolysis, thus increased the resin-dentin bonding durability.

Acid Etching, Dental ; Catechin ; analogs & derivatives ; pharmacology ; Collagen ; chemistry ; drug effects ; Collagenases ; pharmacology ; Composite Resins ; Dental Bonding ; Dental Cements ; Dental Pulp ; Dentin ; chemistry ; drug effects ; Dentin Permeability ; drug effects ; Dentin-Bonding Agents ; Glutaral ; pharmacology ; Hydrogen-Ion Concentration ; Hydrolysis ; Methacrylates ; pharmacology ; Microscopy, Electron, Scanning ; Pressure ; Resin Cements ; Serum Albumin, Bovine ; pharmacology ; Tensile Strength ; Time Factors

Secondary caries due to biofilm acids is a primary cause of dental composite restoration failure. To date, there have been no reports of dental composites that can repel protein adsorption and inhibit bacteria attachment. The objectives of this study were to develop a protein-repellent dental composite by incorporating 2-methacryloyloxyethyl phosphorylcholine (MPC) and to investigate for the first time the effects of MPC mass fraction on protein adsorption, bacteria attachment, biofilm growth, and mechanical properties. Composites were synthesized with 0 (control), 0.75%, 1.5%, 2.25%, 3%, 4.5% and 6% of MPC by mass. A commercial composite was also tested as a control. Mechanical properties were measured in three-point flexure. Protein adsorption onto the composite was determined by the microbicinchoninic acid method. A human saliva microcosm biofilm model was used. Early attachment at 4 h, biofilm at 2 days, live/dead staining and colony-forming units (CFUs) of biofilms grown on the composites were investigated. Composites with MPC of up to 3% had mechanical properties similar to those without MPC and those of the commercial control, whereas 4.5% and 6% MPC decreased the mechanical properties (P<0.05). Increasing MPC from 0 to 3% reduced the protein adsorption on composites (P<0.05). The composite with 3% MPC had protein adsorption that was 1/12 that of the control (P<0.05). Oral bacteria early attachment and biofilm growth were also greatly reduced on the composite with 3% MPC, compared to the control (P<0.05). In conclusion, incorporation of MPC into composites at 3% greatly reduced protein adsorption, bacteria attachment and biofilm CFUs, without compromising mechanical properties. Protein-repellent composites could help to repel bacteria attachment and plaque build-up to reduce secondary caries. The protein-repellent method might be applicable to other dental materials.
Adsorption ; Biofilms ; Colony Count, Microbial ; Composite Resins ; chemistry ; Dental Plaque ; microbiology ; Methacrylates ; analysis ; Phosphorylcholine ; analogs & derivatives ; analysis ; Proteins ; chemistry

To enhance the quality and efficiency of ozagrel by investigating the differences between the ozagrel polymorphs in bioavailability. Solid ozagrel in different polymorph forms were orally administered to SD rats. An HPLC method was established to determinate plasma level of ozagrel. The bioavailabilities of two polymorph forms were calculated and compared. The pharmacokinetic parameters of ozagrel, were as follows: Cmax was 32.72 ± 17.04 and 34.01 ± 19.13 mg · L(-1), respectively; AUC0-t was 61.14 ± 14.76 and 85.56 ± 18.08 mg · L(-1) · h, respectively; t½ was 1.53 ± 0.51 and 4.73 ± 3.00 h, respectively. There was no significant difference in pharmacokinetic parameters between form I and II polymorphs of ozagrel while the t½ of form II is longer, which indicates that the use of form II polymorph as pharmaceutical product may prolong the effective action time in clinics. This would help the polymorph quality control in drug production.
Animals ; Biological Availability ; Chromatography, High Pressure Liquid ; Methacrylates ; chemistry ; pharmacokinetics ; Rats ; Rats, Sprague-Dawley

To develop standard in vitro chondrosarcoma models, we synthesized three hydrogels (i. e., PDMAAm, PNaAMPS and PMETAC) and investigated the influence of Young's modulus, swelling ratio and electric charges on the behavior of chondrosarcoma cells seeded on the hydrogels, including morphology, adhesion and aggregation. Results showed that the morphology of chondrosarcoma cells at 6h was dependent on the charges of hydrogels; cells present spindle-shaped and round-shaped morphology on negative charged and neutral hydrogel, respectively, while no cells spreaded on positive charged hydrogel. Chondrosarcoma cells formed aggregates on neutral PDMAAm after further culture. The hydrogels can be synthesized easily and has the characteristics of ease at use with defined components, which holds great potential for developing standard chondrosarcoma models in vitro.
Bone Neoplasms ; pathology ; Cell Line, Tumor ; Cell Proliferation ; drug effects ; Chondrosarcoma ; pathology ; Humans ; Hydrogels ; chemistry ; pharmacology ; Methacrylates ; pharmacology ; Nylons ; pharmacology ; Static Electricity

To investigate whether masticatory fatigue affects the fracture resistance and pattern of lower premolars restored with quartz-fiber post-core and full crown, 44 single rooted lower premolars recently extracted from orthodontic patients were divided into two groups of 22 each. The crowns of all teeth were removed and endodontically treated and then restored with quartz-fiber post-core and full crown. Twenty-two teeth in one group were selected randomly and circularly loaded at 45° to the long axis of the teeth of 127.4 N at a 6 Hz frequency, and the other group was not delivered to cyclic loading and considered as control. Subsequently, all teeth in two groups were continually loaded to fail at 45° to the long axis of the teeth at a crosshead speed of 1 mm⋅min(-1). The mean destructive force values were (733.88±254.99) and (869.14±280.26) N for the experimental and the control group, respectively, and no statistically significant differences were found between two groups (P>0.05). Bevel fracture and horizontal fracture in the neck of root were the major fracture mode of the specimens. Under the circumstances of this study, it seems that cyclic loading does not affect the fracture strength and pattern of the quartz-fiber post-core-crown complex.
Acid Etching, Dental ; methods ; Adult ; Bicuspid ; Bite Force ; Chromium Alloys ; chemistry ; Crowns ; Dental Prosthesis Design ; Dental Restoration Failure ; Dental Stress Analysis ; instrumentation ; Humans ; Materials Testing ; Methacrylates ; chemistry ; Phosphoric Acids ; chemistry ; Post and Core Technique ; instrumentation ; Quartz ; chemistry ; Resin Cements ; chemistry ; Stress, Mechanical ; Tooth Fractures ; physiopathology ; Tooth Root ; injuries ; Tooth, Nonvital ; rehabilitation

OBJECTIVETo investigate the effect of multiple coatings of the one-step self-etching adhesive on immediate microtensile bond strength to primary dentin.

METHODSTwelve caries-free human primary molars were randomly divided into 2 groups with 6 teeth each. In group 1, each tooth was hemisected into two halves. One half was assigned to control subgroup 1, which was bonded with a single-step self-etching adhesive according to the manufacturer's instructions; the other half was assigned to experimental subgroup 1 in which the adhesive was applied three times before light curing. In group 2, the teeth were also hemisected into two halves. One half was assigned to control subgroup 2, which was bonded with the single-step self-etching adhesive according to the manufacturer's instructions; the other half was assigned to experimental subgroup 2 in which three layers of adhesive were applied with light curing each successive layer. Microtensile bond strength was immediately tested after specimen preparation.

RESULTSWhen the adhesive was applied three times before light curing, the bond strength of the experimental subgroup 1 (n=33, 57.49 +/-11.61 MPa) was higher than that of the control subgroup 1 (n=31, 49.71 +/-11.43 MPa, P<0.05). When using the technique of applying multiple layers of adhesive with light curing each successive layer, no difference of immediate bond strength was observed between the control subgroup 2 and the experimental subgroup 2 (P>0.05).

CONCLUSIONstrength to primary dentin when using the technique of light-curing after applying three layers of adhesive.

Adhesives ; chemistry ; Dental Bonding ; Dental Stress Analysis ; Dentin ; chemistry ; Dentin-Bonding Agents ; chemistry ; Humans ; In Vitro Techniques ; Methacrylates ; chemistry ; Tensile Strength