1.Summarizing the Study on the Incentives Mechanism of Supplier Payment Reform Influencing the Physician Behavior
Chinese Health Economics 2014;(2):36-38
Based on the related theories of physician behavior analysis, summarize and discuss the incentives mechanism of supplier payment on physician behavior and its inner mechanism, provide theoretical supports and political suggestions for further analysis on payment reform.
2.Bone cement and nano bone putty strengthen pedicle screw implantation in the fixation of osteoporotic vertebral body:biomechanical characteristics
Chinese Journal of Tissue Engineering Research 2015;(52):8396-8400
BACKGROUND:Nano bone putty and bone cement injection are two common methods to strengthen the fixation of pedicle screws, but there are relatively few reports on the comparison of their strengthening effects. OBJECTIVE:To compare the biomechanical characteristics of bone cement and nano bone putty strengthening pedicle screw implantation in the fixation of osteoporotic vertebral body. METHODS: Totaly 24 human cadaveric pedicles were obtained, which were al in line with osteoporosis standards, and randomly divided into 3 groups: control group (only implanted pedicle screws), bone cement group (first injected bone cement in the nail channel, and then implanted pedicle screws) and nano bone putty group (first injected nano bone putty in the nail channel, and then implanted pedicle screws). After 2 hours of implantation, the maximum axial pulout strength and the maximum rotation torque of specimens in each group were determined. RESULTS AND CONCLUSION:The maximum axial pulout strength and maximum rotation torque of the bone cement and the nano bone putty groups were greater than those of the control group (P < 0.05), and the maximum axial pulout strength and the maximum rotation torque of the bone cement group were greater than those of the nano bone putty group (P < 0.05). These results demonstrate that the maximum axial pulout strength and the maximum rotation torque of pedicle screw implantation in the fixation of osteoporotic vertebral body can be effectively improved by injection of bone cement and nano bone putty, and the strengthening effect of bone cement is more obvious. 
4.Preliminary Study on the Anti-inflammatory Effect of Polygonum Multiflorum
China Pharmacy 2001;0(12):-
OBJECTIVE:To study the anti-inflammatory effect of ethanol extract of Polygonum multiflorum METHODS:To observe the oedema severity and vaso-permeability in inflamed animal and the response of animal to pain induced by acetate acid after the ethanol extract of Polygonum multiflorum had been intragastrically given for 3 days RESULTS:The oedema severity and vaso-permeability were obviously decreased by the ethanol extract of Polygonum multiflorum and this effect could last 4 hours At the large dose,analgesic effect was observed CONCLUSION:The ethanol extract of Polygonum multiflorum exhibits intensive anti-inflammation effect and the mechanism may be related to its immuno-depression effect
5.DOUBLE FLUORESCENT LABELING STUDY ON THE SPINOSOLITARY TRACT-DORSAL COLUMN POSTSYNAPTIC NEURONS IN RATS
Acta Anatomica Sinica 1955;0(03):-
Electrophysiological studies have shown that the spinosolitary tract-dorsal column postsynaptic (SST-DCPS) neurons may project to both the dorsal column and solitary tract nuclei. In order to demonstrate the neurons morphologically, fluorescein dyes, PI and Bb, were injected into the dorsal column nuclei and the solitary tract nucleus respectively. A total 282 cells were found to be retrogradely labeled in the spinal dorsal horn in 10 adult rats. Of them, 51 (18%) cells were PI-Bb doubly labeled; 120 (43%) were PI labled alone; and 111 (39%) were Bb singly labled. Most of these double-labled cells were concentrated in laminae III-V. The existence of double projection neurons that project to both the dorsal column and solitary tract nuclei, namely the physiologically identified SST-DCPS neurons, is morphologically confirmed in the present study. These neurons may transmit information to both visceral and somatic sensory nuclei, indicating they may play an important role in the convergence of somato-visceral afferents.
6.Expression of autophagy related proteins in neonatal rats after early infection induced celebral matter damage
Meng MENG ; Xingxing LU ; Yan XU ; Jun WANG
Chinese Journal of Immunology 2017;33(8):1152-1155,1160
Objective:To explore the effect of infection on autophagy-related proteins,Beclin-1 and LC3,expression in cerebral white matter in newborn rats.Methods: A total of 64 two-day-old Sprague-Dawley(SD) rats were randomly divided into control and experimental groups(n=32 each).At day 2 to 6 after birth,the rats in experimental group were intraperitoneally injected with 0.6 mg/kg of lipopolysaccharide(LPS) once a day to establish a white matter injury induced by infection in neonatal rats while the rats in control group were injected with equal amounts of normal saline.Rats were sacrificed to collect brain tissues at 12 hour,1,3,5 d after model establishment.HE staining was performed to observe the pathological changes.Changes in the expression of Beclin-1 and LC3 in rat white matter were examined by Western blot and RT-PCR.Results: Growth and development of rat in experimental group was slow,cerebral white matter lesions were obvious.Compared with the control group,the experimental group Beclin1 and LC3 protein and mRNA levels in the model after 12 h began to express,1 d reached the peak,and then decreased,each time points were higher than the control group(P<0.05).Conclusion: Early infection in neonatal rats can cause white matter damage;the expression of autophagy-related proteins,Beclin1 and LC3,showed that autophagy may be involved in the pathological process of white matter damage induced by infection.
7.Bone osseointegration of various acetabular surfaces in weight bearing
Jianfei ZHAO ; Meng LU ; L.fornasier VICTOR
Chinese Journal of Tissue Engineering Research 2005;9(14):182-185
BACKGROUND: In order to enhance the rate and degree of osseointegration of cementless implants, hydroxyapatile(HA) was applied on the different prosthesissurfaces. Themajoritiesofthesestudieshaveutilized non-weight-bearing in vivo dog models and have focused on the fixation of the femoral component. What is the osseointegration of macrotextured acetabular components in a weight-bearing model(dog) like?OBJECTIVE:To evaluate the various macrotextured surface coatings applied to acetabular components of the same design in aweight-bearing canine total hip replacement model.DESIGN: Randomized conparative study using theexperimentalanimals as subjectsSETTING: Department of Ortopaedics, Beijing Tongren Hospital;PathologyDepartment, Bone and Joint Laboratory,St. Michael' s Hospital, U of T,Toronto,CanadaMATERIALS: The experiment was completed in the Pathology Department,Bone and Joint laboratory, St. Michael' s Hospital, U of T, Toronto, Canada from October 2001 to December 2001. Acetabular components with the selected surface characteristics were implanted into forty dogs with the body mass of 29 - 44 kg of either gender and divided into seven groups, including group 1 (AD/HA), Group 2 (CoCr beads/PA), Group 3 (CPTi bead surface),Group 4(CPTi 30 PPI foam),Group 5(CPTi 30 PPI/PA foam),Group 6(CPTi 40 PPI foam), Group 7(CPTi 40 PPI/PA foam).METHODS: Exercise was restricted to leash walks for the first fourteen days post-operatively. After this, dogs were allowed unrestricted activity. The dogs were euthanized at either three or sixmonths after surgery as the project' s protocol. The whole acetabulum,divided into weight-bearing and non weightbearing areas, containing the component was harvested and submitted for histological and histomorphological assessment. MAIN OUTCOME MEASURES:The bone ongrowth and ingrowth with weight bearing and without weight bearing areas in each group.RESULTS:There was significantly greater bone apposition and bone ingrowth for implants withHAcoatingsascompared to uncoated implants. There was also significantly greater bone ingrowth in weight-bearing areas as compared tonon weight-bearing areas at both time periods. The bone growth into AD/HA was 17% at 3 months and descended to 14% at 6 months. The bone growth into CPTi beads surface was 21% at 3 months,30% at 6months in weight-bearing areas. All four foam-coating surfaces there were 15% to 21% ongrowth at 3 months,15% to 32% at 6 months and 21%to 32%ingrowth at 3 months,29%to 45%at 6 months in weight-bearing areas( P < 0.05).CONCLUSION: Hydroxyapatite coating produces significantly greater boneingrowth andappositionin all thesurfacetreatmentstestedinthis study. Weightbearingproducesagreater boneingrowththannon weight-bearing areas and obviously increases with the time prolonging, especially the foam coating
8.Observation on effective of Shuangliao Houfeng Powder on complications of dental extraction
Xianwei MENG ; Yongfang YAO ; Changping LU
International Journal of Traditional Chinese Medicine 2010;32(2):160-161
Objective To observe the effects of Shuangliao Houfeng Powder on complications of dental extraction .Methods 280 patients who need dental extraction were recruited into a treatment group and a control group. The treatment group was applied with Shuangliao Houfeng Powder externally on alveolus dentalis after dental extraction, while the control group received no post-treatment after dental extraction. Wound healing and incidence of complications were observed after three days. Results Wound healing in stage 1 showed better results in the treatment group than the control group (P<0.05). Postoperative bleeding time of the treatment group was significantly shorter than the control group (P<0.01) . Besides the treatment group got better improvements in such symptoms as gingival swelling, pain, and difficulty in mouth opening than the control group (P< 0.05). Conclusion Shuangliao Houfeng Powder is effective on complications of dental extraction and worthy of promotion in clinic.
9.Proximal vs total gastrectomy for proximal advanced gastric cancer
Xin LU ; Qingbin MENG ; Yongsheng SHAO
Chinese Journal of General Surgery 2016;31(2):97-99
Objective To investigate the clinical results and prognosis between proximal and total gastrectomy in proximal advanced gastric cancer.Methods The clinicopathological data of 221 patients with proximal advanced gastric cancer who undcrwent radical gastrectomy were retrospectively analyzed.82 patients and 139 patients underwent proximal and total gastrectomy respectively.The number of dessected lymph nodes,postoperative complications and mortality were compared.Kaplan-Meier survival rate curves and Log-rank test were drawn and compared.Results A total of 1 411 (11-34) and 3 345 (14-35) lymph nodes were harvested from the surgical specimens of 82 and 139 patients with proximal and total gastrectomy respectively,the average number of harvested lymph nodes was 17 ± 11 and 24 ± 10 (t =2.586,P <0.05).The overall complications in proximal gastrectomy were higher than total gastrectomy (73.2% vs.30.2%,x2 =38.291,P <0.01).The ratio of functional delayed gastric emptying,anastomotic leakage and stenosis,reflux esophagitis in proximal gastrectomy patients was higher than total gastrectomy.The survival rate in proximal gastrectomy were lower than total gastrectomy in proximal advanced gastric cancer (P <0.01).Conclusion Total gastrectomy is recommended for proximal advanced gastric cancer.
10.The effects of thermocycling on the tensile bond strength of silicone denture liner incorporated with silver-nano-particles
Meng WANG ; Huaiqin ZHANG ; Xiaochen LU
Journal of Practical Stomatology 2014;(5):709-711
16 standered acrylic resin blocks with silicone resilient denture liner(10 mm ×8 mm ×3 mm)incorporated with nano-silver par-ticles at 5% (m/m,by dry wet)in-between were prepared.8 blocks were immersed in distilled water for 24 h at 37 ℃ as the controls (group 1).Another 8 were thermocycled for 4 000 cycles(group 2).16 acrylic resin bars were thermal cycled for 4 000 cycles.Then they were processed exactly as the control group (group 3).Tensile bond strength of the specimens was measured by a universal testing machine. The bond strength values(MPa)of group 1,2 and 3 were 2.683 ±0.435,2.179 ±0.633 and 1.460 ±0.566 respectively(group 1 vs 2,P>0.05;group 3 vs 1 or 2,P<0.05).The failure mode of the blocks in group 1 and 2 was mainly cohesive failure,in group 3 adhesion fail-ure.