Surgical resection of the mandible due to presence of benign or malignant tumor is the most common cause of the mandibular deviation. Depending upon the location and extent of the tumor in the mandible, various surgical treatment modalities like marginal, segmental, hemi, subtotal, or total mandibulectomy can be performed. The clinicians must wait for extensive period of time for completion of healing and acceptance of the osseous graft before considering the definitive prosthesis. During this initial healing period prosthodontic intervention is required for preventing the mandibular deviation. This case report describes early prosthodontic management of a patient who has undergone a reconstructed hemi-mandibulectomy with modified mandibular guide flange prosthesis. The prosthesis helps patient moving the mandible normally without deviation during functions like speech and mastication.
Ameloblastoma ; Dental Prosthesis Design ; Humans ; Mandible ; Mandibular Osteotomy ; Mandibular Prosthesis ; Mastication ; Maxillofacial Prosthesis ; Moving and Lifting Patients ; Prostheses and Implants ; Prosthodontics ; Transplants

OBJECTIVES: This study aimed to evaluate the stability of prosthetic screws from three types of craniofacial prostheses retention systems (bar-clip, ball/O-ring, and magnet) when submitted to mechanical cycling. MATERIALS AND METHODS: Twelve models of acrylic resin were used with implants placed 20 mm from each other and separated into three groups: (1) bar-clip (Sistema INP, São Paulo, Brazil), (2) ball/O-ring (Sistema INP), and (3) magnet (Metalmag, São Paulo, Brazil), with four samples in each group. Each sample underwent a mechanical cycling removal and insertion test (f=0.5 Hz) to determine the torque and the detorque values of the retention screws. A servo-hydraulic MTS machine (810-Flextest 40; MTS Systems, Eden Prairie, MN, USA) was used to perform the cycling with 2.5 mm and a displacement of 10 mm/s. The screws of the retention systems received an initial torque of 30 Ncm and the torque values required for loosening the screw values were obtained in three cycles (1,080, 2,160, and 3,240). The screws were retorqued to 30 Ncm before each new cycle. RESULTS: The sample was composed of 24 screws grouped as follows: bar-clip (n=8), ball/O-ring (n=8), and magnet (n=8). There were significant differences between the groups, with greater detorque values observed in the ball/O-ring group when compared to the bar-clip and magnet groups for the first cycle. However, the detorque value was greater in the bar-clip group for the second cycle. CONCLUSION: The results of this study indicate that all prosthetic screws will loosen slightly after an initial tightening torque, also the bar-clip retention system demonstrated greater loosening of the screws when compared with ball/O-ring and magnet retention systems.
Grassland ; Maxillofacial Prosthesis ; Prostheses and Implants* ; Prosthesis Failure ; Prosthesis Retention ; Torque

This paper is to report our study in which the differences between prosthetic restoration and surgical reconstruction using traditional clasp retention technology were analyzed based on three-dimensional finite element methods in our laboratory. Firstly, the maxillary unilateral defect model was developed using medical image processing software MIMICS. Secondly, the prosthesis was generated by mirroring technology. The clasp was designed according to the methods raised by Aramany. Then, the stress distribution of maxilla was calculated by simulating occlusion. According to the results, after osseointegration of surgical reconstruction, stresses of unaffected abutments were reduced significantly, and less stress of junction occurred near zygoma of affected side, which were all less than stresses of prosthesis restoration. Thus, removing the clasp of surgical reconstruction increased the stresses of unaffected abutments. The stress trends of maxillary components were different between prosthetic restoration and surgical reconstruction. Surgical reconstruction is better than prosthesis restoration in protection of the abutments. Clasp can alleviate the occlusal burden of maxilla. Varieties of retentive technologies can be considered in prosthesis restoration. The surgical reconstruction is more conducive to rehabilitate unilateral maxilla biomechanically in clinic.
Biomechanical Phenomena ; Finite Element Analysis ; Humans ; Image Processing, Computer-Assisted ; Mandibular Reconstruction ; methods ; Maxilla ; surgery ; Maxillofacial Prosthesis ; Osseointegration ; Zygoma

PURPOSE: The purpose of this study was to investigate the demographic patterns of maxillofacial prosthetic treatment to identify the characteristics and geographic distribution of patients with maxillofacial prosthetics in the capital region of Korea. MATERIALS AND METHODS: This retrospective analytical multicenter study was performed by chart reviews. This study included patients who visited the department of prosthodontics at four university dental hospitals for maxillofacial prosthetic rehabilitation. Patients with facial and congenital defects or with insufficient medical data were excluded. The patients were classified into three categories based on the location of the defect. Patients' sex, age, and residential area were analyzed. Pearson's chi-square test with a significance level of 0.05 was used to analyze the variables. RESULTS: Among 540 patients with maxillofacial prosthetics, there were 284 (52.59%) male patients and 256 (47.41%) female patients. The number of the patients varied greatly by hospital. Most patients were older than 70, and the most common defect was a hard palate defect. Chi-square analysis did not identify any significant differences in sex, age, and distance to hospital for any defect group (P>.05). CONCLUSION: The results of this study indicated that there was imbalance in the distribution of patients with maxillofacial prosthetic among the hospitals in the capital region of Korea. Considerations on specialists and insurance policies for the improvement of maxillofacial prosthetics in Korea are required.
Congenital Abnormalities ; Female ; Head and Neck Neoplasms ; Humans ; Insurance ; Korea* ; Male ; Mandibular Prosthesis ; Maxillofacial Prosthesis ; Palatal Obturators ; Palate, Hard ; Prosthodontics ; Rehabilitation ; Retrospective Studies ; Specialization ; Velopharyngeal Insufficiency

PURPOSE: This study aimed to create a digitized database of fabricated obturators to be kept for patients' potential emergency needs. MATERIALS AND METHODS: A chairside intraoral scanner was used to scan the surfaces of an acrylic resin obturator. The scanned data was recorded and saved as a single standard tessellation language file using a three-dimensional modeling software. A simulated obturator model was manufactured using fused deposition modeling technique in a three-dimensional printer. RESULTS: The entire obturator was successfully scanned regardless of its structural complexity, modeled as three-dimensional data, and stored in the digital system of our clinic at a relatively small size (19.6 MB). A simulated obturator model was then accurately manufactured from these data. CONCLUSION: This study provides a proof-of-concept for the use of digital technology to create a digitized database of obturators for edentulous maxillectomy patients.
Emergencies ; Humans ; Maxillofacial Prosthesis* ; Pilot Projects*

In order to investigate the influence of radiation therapy after the treatment of maxillary implant-supported prostheses, 27 patients received a total of 131 implants in maxilla after oral cancer treatment and/or reconstructive surgery. Among them, 25 received maxillary implant-supported prostheses. The cumulative survival rates of implants and prostheses were evaluated by the product-limit-estimates method according to Kaplan-Meier. The cumulative survival rate of implants and prostheses in irradiated patients was compared with that in non-irradiated patients by statistical Log-rank test. The results showed that 112 implants were observed after implant loading. The implants cumulative survival rate was approximately 65% for overall patients. The cumulative prosthesis successful rate was approximately 88% for all 25 patients. Log-rank test analysis revealed that there was a significant difference in cumulative implants survival rates between non-irradiated and irradiated maxillary bone (P < 0.01). It was concluded that the implants and prostheses in irradiated patients have significantly lower survival rates than in non-irradiated patients.
Aged ; Carcinoma, Squamous Cell ; radiotherapy ; surgery ; Dental Prosthesis, Implant-Supported ; Female ; Graft Survival ; radiation effects ; Humans ; Male ; Mandibular Prosthesis ; Maxilla ; surgery ; Maxillofacial Prosthesis ; Maxillofacial Prosthesis Implantation ; Middle Aged ; Mouth Neoplasms ; radiotherapy ; surgery ; Osseointegration ; Pilot Projects ; Radiation Injuries ; Retrospective Studies ; Survival Rate ; Titanium

A case of a patient with a unilateral maxillary defect and restricted mouth opening was presented. The two-stage hollow maxillofacial prosthesis can be used to restore the above defect, thus promoting mastication, speaking, swallowing, and sucking, as well as improving the patient's appearance. Satisfactory results were achieved.
Humans ; Mastication ; Maxilla ; Maxillofacial Prosthesis ; Mouth ; Prostheses and Implants

PURPOSE: Maxillofacial silicone elastomer is usually colored intrinsically with color pigments to match skin colors. The purpose of this study was to investigate the color stability of a maxillofacial silicone elastomer, colored with a thermochromic, color changing pigment. MATERIALS AND METHODS: Disc-shaped maxillofacial silicone specimens were prepared and divided into 3 groups: a conventionally colored control group, one group additionally colored with 0.2 wt% thermochromic pigment , and one group with 0.6 wt% thermochromic pigment. Half of the surface of each specimen was covered with an aluminium foil. All of the specimens were exposed to UV radiation in 6 hour cycles over 46 days. In between the UV exposures, half of the specimens were stored in darkness, at room temperature, and the other half was stored in an incubator, at a humidity of 97% and a temperature of +37degrees C. Color measurements were made with a spectrophotometer and registered according to the CIELAB L*a*b* color model system. The changes in L*, a* and b* values during artificial aging were statistically analyzed by using paired samples t-test and repeated measures ANOVA. P-values <.05 were considered as statistically significant. RESULTS: The UV exposure resulted in visually noticeable and statistically significant color changes in the L*, a* and b* values in both of the test groups containing thermochromic pigment. Storage in the incubator lead to statistically significant color changes in the a* and b* values of the specimens containing thermochromic pigment, compared to those stored at room temperature. CONCLUSION: The specimens containing thermochromic pigment were very sensitive to UV radiation, and the thermochromic pigment is not suitable, as such, to be used in maxillofacial prostheses.
Aging ; Darkness ; Humidity ; Incubators ; Maxillofacial Prosthesis ; Silicone Elastomers ; Skin

With the rapid development of 3D printing, it is widely used in the field of cranio-maxillofacial surgery. Through the individualized production of 3D printing, the backward mode of traditional production relying on manual shaping has been changed to meet the needs of different patients. However, as no clear specification exists for the performance requirements of 3D printing metal powder for cranio-maxillofacial surgery, its long-term development is not feasible. In this paper, the preparation technologies of 3D printing metal powder for cranio-maxillofacial prostheses (i.e., gas atomization, rotating electrode atomization, and radio frequency plasma spheroidization) and 3D printing forming technologies (i.e., selective laser melting, electron beam selective melting, and laser-engineered net shaping) are introduced. The performance requirements of 3D printing metal powder for cranio-maxillofacial prostheses are then summarized according to the characteristics of the preparation and forming technologies described.
Humans ; Lasers ; Maxillofacial Prosthesis ; Metals ; Powders ; Printing, Three-Dimensional

maxillofacial prostheses. Dr. Brenemark first introduced possibility of use of maxillofacial interosseous implant in patients with ablative tumor surgery in 1979. He did introduce the new type of maxillofacial implants system which widen the fixture flange on top of the bone. The advantages of fixed prostheses with implants were well known to various ways, easy to attach, keep clean prostheses, and not to disturb recipient bed. But there are some problems to install implants on maxillofacial regions, because mostly facial bone has very thin cortical bone and poor bone quality. It needs more retention between implant and bone which overcome that fault with fixture flange. To make maxillofacial prostheses, it should be understood general procedure of maxillofacial laboratory work. Ear and midface maxillofacial fabrication which include nose and eye defects will be described step by step.]]>
Ear ; Facial Bones ; Humans ; Maxillofacial Prosthesis ; Nose ; Prostheses and Implants