HPLC specific chromatograms of Poria were established, and the concentrations of 10 triterpenoids(16α-hydroxydehydrotrametenolic acid, poricoic acid B, dehydrotumulosic acid, poricoic acid A, polyporenic acid C, poricoic acid AM, 3-O-acetyl-16α-hydroxydehydrotrametenolic acid, dehydropachymic acid, pachymic acid, and dehydrotrametenolic acid) were simultaneously determined. Chromatographic analysis was conducted on a Welch Ultimate XB C_(18) column(4.6 mm × 250 mm,5 μm). Acetonitrile solution(contain 3% tetrahydrofuran)(A) and 0.1% formic acid aqueous solution(B) were used as the mobile phase with gradient elution at a flow rate of 1.0 mL·min~(-1). The column temperature was 30 ℃ and the injection volume was 20 μL. The experimental data were analyzed by the SPSS 22.0 and GraphPad Prism 7.0. The established triterpenoids fingerprints were specific, and the 10 components were well separated and showed good linearity(r≥0.999 6) within the concentration ranges tested. The mean recoveries were between 98.53%-103.8%(RSD 1.7%-2.7%). The method was specific and repeatable, and could be used for identification and quality evaluation of Poria. The results showed that the contents of 10 triterpenoids were positively correlated with each other. The contents of 10 triterpenoids of samples collected from producing areas were higher than that collected from markets. The total contents of 10 triterpenoids of samples collected from Hubei and Yunnan province were slightly higher than that from Anhui province, but the contents of samples from Anhui province were varied in smaller ranges.
China ; Chromatography, High Pressure Liquid ; Materia Medica ; analysis ; Poria ; chemistry

Nitrogen fertilizer has been the long-lasting crucial component in cultivation of Chinese materia medica(CMM) and crops for its profound effects on enhancing the productivity. In consideration of its role in better production, intensive and excessive application of N fertilizer is often found in CMM cultivation. Therefore, firstly, this review summarized various concentrations of N application with regards to different CMM and districts from the literatures published in the last two decades. The recommended concentration of nitrogen application of forty seven CMM species were covered in this review. We found that the optimum rates of nitrogen fertili-zer for different medicinal plants species were varied in the range between 0-1 035.55 kg·hm~(-2). Most of the optimum rates of nitrogen fertilizer for CMM in published researches fell between 100-199 kg·hm~(-2). The optimum rate of nitrogen fertilizer is not only related to amount of nitrogen required for different medicinal plants but also to soil fertilities of different fields. In addition, we outlined the diffe-rent effects of proper and excessive nitrogen deposition on yield of CMM. Proper nitrogen deposition benefits the yield of CMM, howe-ver, excessive nitrogen use accounts for a decrease in CMM yield. We elucidated that nutritional content, water use efficiencies, and photosynthesis capacity were major influencing factors. Researches showed that proper nitrogen fertilizer could promote the water use efficiencies of plants and boost photosynthesis. Consequently, the yield of CMM can be enhanced after nitrogen deposition. However, negative effects of nitrogen fertilizer were also found on plant including producing toxic substances to the soil and causing severe pest damages. Lastly we analyzed the impact of N fertilizer application on secondary metabolites which accounts for a large part of active pharmaceutical ingredients of CMM. It usually caused an increase in nitrogen-containing secondary metabolites content and a decrease in non-nitrogen-containing secondary metabolites content respectively. The potential underlying mechanisms are the different synthetic pathways of these metabolites and the plant nutritional status. Synthesis of non-nitrogen-containing secondary metabolites like phenols can be inhibited after nitrogen application because of the competition of the same precursor substances between metabolites synthesis and plant growth. To sum up, impacts and mechanisms of nitrogen fertilizer on yield and quality enhancement of CMM were discussed in this review. Negative effects of excessive nitrogen application on CMM should be paid special attention in CMM cultivation and prescription fertilization based on the field soil quality is strongly recommended. Overall, this review aims to provides insights on improving the proper application of N fertilizer in the cultivation of CMM.
Agriculture ; China ; Fertilizers ; Materia Medica ; Nitrogen/analysis* ; Soil

OBJECTIVETo study the quality of medicinal material of Thesium chinense.

METHODThe active ingredients of total flavonoids, kaempferol, mannitol, polysaccharides were selected as the evaluative indicators to comprehensively evaluate the quality of medicinal material of T. chinense.

RESULTThe total flavone 3.38%, kaempferol 0.984 7 mg x g(-1), mannitol 6.12%, polysaccharides 14.08% and water soluble extract 30.28% were measured in the sample of T. chinense. There was a certain correlation among these selected active ingredients. The compositions of most biological activities component in T. chinense of different populations were similar, but the contents were different significantly. The content of activities component in T. chinense showed a general tendency of declining during growth period and with the increase time of storage.

CONCLUSIONFlavone, kaempferol, mannitol, polysaccharides should be selected as the indicators to evaluate the quality of medicinal material of T. chinense.

Flavones ; analysis ; Mannitol ; analysis ; Materia Medica ; chemistry ; Polysaccharides ; antagonists & inhibitors ; Santalaceae ; chemistry

OBJECTIVETo establish the HPLC fingerprint of flavonoids of the six clinical frequently used Chinese materia medica for regulating Qi flow,such as Citri grandis, C. grands, Citri Reticulatae Pericarpium, Citri Reticulatae Pericarpium Viride, Aurantii Fructus, and Aurantii Fructus Immaturus from Citrus, and analysis differences in the fingerprints to provide scientific basis for profile-effect research and clinical reasonable use.

METHODHPLC was performed on a C18 column with methanol-water (with acetic acid), to establish HPLC fingerprints of the six kinds of medicinal herbs on the same chromatograph condition.

RESULTThe six frequently used Chinese materia medica were divided into naringin type and hesperidin type according to the method of phytochemotaxonomy. Based on the retention time of chromatograph peaks, C. grandis and C. grands had fifteen common peaks; Citri Reticulatae Pericarpium, Citri Reticulatae Pericarpium Viride, Aurantii Fructus and Aurantii Fructus Immaturus had ten common peaks. All herbs had five common peaks. Compared with mutual model, the holistic similarity of chromatograms of C. grandis and C. grands was in the range of 0.9285 - 0.9962. The degree of similarity was high. For Citri Reticulatae Pericarpium, Citri Reticulatae Pericarpium Viride and Aurantii Fructus Immaturus, it was in the range of 0.9221 - 0.9973 and high. But the similarity of Aurantii Fructus was only in 0.4547 - 0.7733 with the mutual model.

CONCLUSIONThe established fingerprints of flavonoids of the six common traditional Chinese medicines can be used to compare the differences intuitively. Meanwhile, the peak height and peak areas of characteristic peaks are different remarkably, but whether it is connected with the different function of regulating Qi flow of the six medical materials in clinical use, is still needed to be studied.

Chromatography, High Pressure Liquid ; Citrus ; chemistry ; classification ; Drugs, Chinese Herbal ; analysis ; Flavonoids ; analysis ; Materia Medica ; chemistry

OBJECTIVETo establish the unitive multicomponent quality system bridged macrostate mathematic model parameters of material quality and microstate component concentration for Chinese materia medica (CMM).

METHODAccording to law of biologic laws of thermodynamics, the state functions of macrostate qulity of the CMM were established. The validation test was carried out as modeling drug as alcohol extract of Radix Rhozome (AERR), their enthalpy of combustion was determined, and entropy and the capability of information by chromatographic fingerprint were assayed, and then the biologic apparent macrostate parameters were calculated.

RESULTThe biologic macrostate mathematic models, for the CMM quality controll, were established as parameters as the apparent equilibrium constant, biologic enthalpy, Gibbs free energy and biologic entropy etc. The total molarity for the 10 batchs of AERR were 0.153 4 mmol x g(-1) with 28.26% of RSD, with the average of apparent equilibrium constants, biologic enthalpy, Gibbs free energy and biologic entropy were 0.039 65, 8 005 J x mol(-1), -2.408 x 10(7) J x mol(-1) and - 8.078 x 10(4) J x K(-1) with RSD as 6.020%, 1.860%, 42.32% and 42.31%, respectively.

CONCLUSIONThe macrostate quality models for CMM can represent their intrinsic quality for multicomponent dynamic system such as the CMM, to manifest out as if the forest away from or tree near from to see it.

Drugs, Chinese Herbal ; analysis ; Materia Medica ; analysis ; Models, Theoretical ; Quality Control ; Thermodynamics

Near-infrared (NIR) diffuse reflectance spectroscopy was used to analyze the impact of multi-class particle size of Chinese material medica (CMM) based on the spectral characteristics in overtone and combination region. Several types of CMM (60, 80, 100,120 mesh) were subjected to NIR spectra analysis. Spectral reproducibility was examined after sample repackage. The result showed that the effects of particle size on the NIR spectra were different according to different bands, in the combination region and first combination-overtone region. Spectroscopy intensity was proportional to the particle size and influence of particle size was greater as the wavelength increased. While in the second combination-overtone region, it was inversely proportional to particle size. To the sampling loading error, the result indicated that when the mesh number was larger than 60 mesh, the error was small. The appropriate particle size was clarified to guarantee the accuracy and reliability of NIR diffuse reflectance spectroscopy in CMM.
Drugs, Chinese Herbal ; analysis ; Materia Medica ; analysis ; Particle Size ; Spectroscopy, Near-Infrared ; methods

OBJECTIVETo investigate the AAPH scavenging activities of 22 flavonoids and phenolic acids and 9 extracts of Chinese materia medica.

METHODThe antioxidant activities of the samples were evaluated by an oxygen radical absorbance capacity method (ORAC), at the same time, the total contents of flavonoids and phenolic the 9 herb extracts were analyzed by Folin-Ciocalteu method, and the active components were qualitatively and quantitatively analyzed by an HPLC method.

RESULTIt was found that the tea extract showed the strongest AAPH activity with the ORAC value of 4786.40 micromol x g(-1) whereas safflower demonstrated the weakest activity with the ORAC value of 784.04 micromol x g(-1). As for compounds, quercetin had the strongest AAPH activity with the ORAC value of 12.90 while ( - )-EGC had the weakest activity with the ORAC value of 2.47. A quantitative relationship was obtained to describe the AAPH scavenging activity of the herb extracts: Y = 1844.8 lnX-3577.5, r = 0.8675, where Y stands for the ORAC vaule, and X stands for the concentration of total phenolic acids.

CONCLUSIONFlavonoids and phenolic acids are the AAPH scavenging active ingredients in the Chinese herb extracts. It's a good way to study the antioxidant activity of Chinese herb extract and its chemical composition by combing ORAC method and HPLC method.

Amidines ; analysis ; Drugs, Chinese Herbal ; analysis ; Flavonoids ; analysis ; Free Radical Scavengers ; analysis ; Hydroxybenzoates ; analysis ; Materia Medica ; chemistry ; Plants, Medicinal ; chemistry

OBJECTIVETo study comparatively the fingerprint of zhuang medicinal material-ant nest of Macrotermes annadalei from different areas in Guangxi.

METHODThe fingerprint of total amino acid of 12 lots of ant nest of M. annadalei from different areas was determined by high speed amino acid analyzer. Separation was perform on anylytical column (4.6 mm x 40 mm), column temperature at 57 degrees C. The flow rate of buffering solution was 0.4 mL x min(-1), and the flow rate of ninhydrin was 0.3 mL x min(-1).

RESULT18 characteristic peaks in the fingerprints were identified in 12 lots of samples, the chromatographic overlap rate was 89.4%-100.0%, and the total relative peak area of 7 lots of samples was over 52% in eight main peaks.

CONCLUSIONThe components of amino acid of ant nest of M. armadalei from different areas in Guangxi are very similar. The qualities of majority samples are good as well. The fingerprints can provide the useful information for the quality evaluation and the identification of ant nest of M. annadalei.

Amino Acids ; analysis ; Animals ; Ants ; China ; Ecosystem ; Materia Medica ; administration & dosage ; chemistry ; Powders ; Quality Control

This paper summarized and analyzed the status quo and problems about molecular identification of animal medical material, based on the facts, we proposed some research strategies, including uniting to tackle key problems, expanding the research species, accelerating manufacture and generalization of molecular identification kit, priming the research project of DNA barcoding, and establishing standard database on animal medical material.
Animal Structures ; Animals ; DNA Barcoding, Taxonomic ; Databases, Genetic ; standards ; Materia Medica ; analysis ; Mitochondria ; genetics ; Research

AIMTo develop a method for separating the major bile acids by capillary zone electrophoresis (CZE).

METHODSThe effect of different separations, such as the compose, pH and the concentration of buffer, on the electro-osmotic flow (EOF), the migration time and resolution of 8 bile acids in this system were studied. The general trends in migration time could be correlated to the pH and concentration of the buffer. The effect of organic reagent on EOF and migration time were also investigated. By addition of methanol, the EOF went smaller than before, and better resolution was achieved. The experimental results showed that optimum separation was achieved under the following condition: buffer composition of 126 mmol.L-1 disodium tetraborate, 43 mmol.L-1 disodium hydrogenphosphate, 18% methanol; temperature 30 degrees C; voltage 30 kV; total length of capillary 570 mm and 500 mm from injection end; ultraviolet detection at 200 nm; pressure injection 5 kPa for 8 s.

RESULTSEight kinds of bile acid had been separated by CZE with only one injection. The method was used to analyse the contents of bile acids from different kinds of bear biles, the recovery was 89%-107%.

CONCLUSIONThis method is simple and rapid, and can be used to determine the content of bile acids in bear biles. The calibration curve showed good linearity for eight bile acids in the concentration range of 4-60 mg.mL-1 (gamma > 0.9954). The total time for seperation and determination was within 25 min.

Animals ; Bile ; chemistry ; Bile Acids and Salts ; analysis ; isolation & purification ; Electrophoresis, Capillary ; methods ; Materia Medica ; chemistry ; Ursidae