1.Influence of voxel size on cone-beam computed tomography-based detection of vertical root fractures in the presence of intracanal metallic posts
Fernanda Paula YAMAMOTO-SILVA ; Claudeir Felipe DE OLIVEIRA SIQUEIRA ; Maria Alves Garcia Santos SILVA ; Rodrigo Borges FONSECA ; Ananda Amaral SANTOS ; Carlos ESTRELA ; Brunno Santos DE FREITAS SILVA
Imaging Science in Dentistry 2018;48(3):177-184
PURPOSE: This study was performed to evaluate the influence of voxel size and the accuracy of 2 cone-beam computed tomography (CBCT) systems in the detection of vertical root fracture (VRF) in the presence of intracanal metallic posts. MATERIALS AND METHODS: Thirty uniradicular extracted human teeth were selected and randomly divided into 2 groups (VRF group, n=15; and control group, n=15). The VRFs were induced by an Instron machine, and metallic posts were placed in both groups. The scans were acquired by CBCT with 4 different voxel sizes: 0.1 mm and 0.16 mm (for the Eagle 3D V-Beam system) and 0.125 mm and 0.2 mm (for the i-CAT system) (protocols 1, 2, 3, and 4, respectively). Interobserver and intraobserver agreement was assessed using the Cohen kappa test. Sensitivity and specificity were evaluated and receiver operating characteristic analysis was performed. RESULTS: The intraobserver coefficients indicated good (0.71) to very good (0.83) agreement, and the interobserver coefficients indicated moderate (0.57) to very good (0.80) agreement. In respect to the relationship between sensitivity and specificity, a statistically significant difference was found between protocols 1 (positive predictive value: 0.710, negative predictive value: 0.724) and 3 (positive predictive value: 0.727, negative predictive value: 0.632) (P < .05). The least interference due to artifact formation was observed using protocol 2. CONCLUSION: Protocols with a smaller voxel size and field of view seemed to favor the detection of VRF in teeth with intracanal metallic posts.
Artifacts
;
Cone-Beam Computed Tomography
;
Eagles
;
Humans
;
ROC Curve
;
Sensitivity and Specificity
;
Tooth
;
Tooth Fractures
2.Optimizing cone-beam computed tomography exposure for an effective radiation dose and image quality balance
Ananda Amaral SANTOS ; Brunno Santos de Freitas SILVA ; Fernanda Ferreira Nunes CORREIA ; Eleazar MEZAIKO ; Camila Ferro de Souza RORIZ ; Maria Alves Garcia SILVA ; Deborah Queiroz FREITAS ; Fernanda Paula YAMAMOTO-SILVA
Imaging Science in Dentistry 2024;54(2):159-169
Purpose:
The aim of this study was to evaluate the influence of different cone-beam computed tomography (CBCT) acquisition protocols on reducing the effective radiation dose while maintaining image quality.
Materials and Methods:
The effective dose emitted by a CBCT device was calculated using thermoluminescent dosimeters placed in a Rando Alderson phantom. Image quality was assessed by 3 experienced evaluators. The relation-ship between image quality and confidence was evaluated using the Fisher exact test, and the agreement among raters was assessed using the kappa test. Multiple linear regression analysis was performed to investigate whether the technical parameters could predict the effective dose. P-values<0.05 were considered to indicate statistical significance.
Results:
The optimized protocol (3 mA, 99 kVp, and 450 projection images) demonstrated good image quality and a lower effective dose for radiation-sensitive organs. Image quality and confidence had consistent values for all structures (P<0.05). Multiple linear regression analysis resulted in a statistically significant model. The milliamperage (b = 0.504; t = 3.406; P = 0.027), kilovoltage peak (b = 0.589; t = 3.979; P = 0.016) and number of projection images (b = 0.557; t = 3.762; P = 0.020) were predictors of the effective dose.
Conclusion
Optimized CBCT acquisition protocols can significantly reduce the effective radiation dose while maintaining acceptable image quality by adjusting the milliamperage and projection images.
3.Influence of CBCT metal artifact reduction on vertical radicular fracture detection
Mariana Rodrigues OLIVEIRA ; Thiago Oliveira SOUSA ; Aline Ferreira CAETANO ; Rogério Ribeiro de PAIVA ; José VALLADARES-NETO ; Fernanda Paula YAMAMOTO-SILVA ; Maria Alves GARCIA SILVA
Imaging Science in Dentistry 2021;51(1):55-62
Purpose:
This study evaluated the influence of a metal artifact reduction (MAR) tool in a cone-beam computed tomography (CBCT) device on the diagnosis of vertical root fractures (VRFs) in teeth with different root filling materials.
Materials and Methods:
Forty-five extracted human premolars were classified into three subgroups; 1) no filling; 2) gutta-percha; and 3) metallic post. CBCT images were acquired using an Orthopantomograph 300 unit with and without a MAR tool. Subsequently, the same teeth were fractured, and new CBCT scans were obtained with and without MAR. Two oral radiologists evaluated the images regarding the presence or absence of VRF. Receiver operating characteristic (ROC) curves and diagnostic tests were performed.
Results:
The overall area under the curve values were 0.695 for CBCT with MAR and 0.789 for CBCT without MAR. The MAR tool negatively influenced the overall diagnosis of VRFs in all tested subgroups, with lower accuracy (0.45–0.72), sensitivity (0.6–0.67), and specificity (0.23–0.8) than were found for the images without MAR. In the latter group, the accuracy, sensitivity, and specificity values were 0.68–0.77, 0.67–083, and 0.53–087, respectively. However, no significant difference was found between images with and without MAR for the no filling and gutta-percha subgroups (P>0.05). In the metallic post subgroup, CBCT showed a significant difference according to MAR use (P<0.05).
Conclusion
The OP 300 MAR tool negatively influenced the detection of VRFs in teeth with no root canal filling, gutta-percha, or metallic posts. Teeth with metallic posts suffered the most from the negative impact of MAR.
4.Directions of mandibular canal displacement in ameloblastoma: A computed tomography mirrored-method analysis
Karine EVANGELISTA ; Lincoln CARDOSO ; Ítalo TOLEDO ; Giovanni GASPERINI ; José VALLADARES-NETO ; Lucia Helena SOARES CEVIDANES ; Antonio Carlos de OLIVEIRA RUELLAS ; Maria Alves GARCIA SILVA
Imaging Science in Dentistry 2021;51(1):17-25
Purpose:
This study was performed to investigate mandibular canal displacement in patients with ameloblastoma using a 3-dimensional mirrored-model analysis.
Materials and Methods:
The sample consisted of computed tomographic scans of patients with ameloblastoma (n=10) and healthy controls (n=20). The amount of mandibular canal asymmetry was recorded as a continuous variable, while the buccolingual (yaw) and supero-inferior (pitch) directions of displacement were classified as categorical variables. The t-test for independent samples and the Fisher exact test were used to compare groups in terms of differences between sides and the presence of asymmetric inclinations, respectively (P<0.05).
Results:
The length of the mandibular canal was similar on both sides in both groups. The ameloblastoma group presented more lateral (2.40±4.16 mm) and inferior (−1.97±1.92 mm) positions of the mental foramen, and a more buccal (1.09±2.75 mm) position of the middle canal point on the lesion side. Displacement of the mandibular canal tended to be found in the anterior region in patients with ameloblastoma, occurring toward the buccal and inferior directions in 60% and 70% of ameloblastoma patients, respectively.
Conclusion
Mandibular canal displacement due to ameloblastoma could be detected by this superimposed mirrored method, and displacement was more prevalent toward the inferior and buccal directions. This displacement affected the mental foramen position, but did not lead to a change in the length of the mandibular canal. The control group presented no mandibular canal displacement.