OBJECTIVES: The aim of this study was to compare the anterior and posterior occlusal plane characteristics of patients with different temporomandibular joint osseous statuses. METHODS: A total of 306 patients with initial cone beam CT (CBCT) and cephalograms were included. They were divided into three groups on the basis of their temporomandibular joint osseous status: bilateral normal (BN) group, indeterminate for osteoarthrosis (I) group, and osteoarthrosis (OA) group. The anterior and posterior occlusal planes (AOP and POP) of the different groups were compared. Then, the regression equation was established after adjusting for confounding factors, and a correlation analysis between the occlusion planes and other parameters was performed. RESULTS: SNA, SNB, FMA, SN-MP, Ar-Go, and S-Go were correlated with the occlusal planes. Relative to the BN and I groups, the FH-OP of the OA group increased by 1.67° on the average, FH-POP increased by 1.42° on the average, and FH-AOP increased by 2.05° on the average. CONCLUSIONS The occlusal planes were steeper in the patients with temporomandibular osteoarthrosis than in the patients without it, and the mandible rotated downward and backward. The height of the mandibular ramus, the mandibular body length, and the posterior face height were small. In clinical practice, attention should be given to the potential risk of temporomandibular joint osteoarthrosis in such patients. In addition, SNB, FMA, SN-MP, Ar-Go, S-Go, and occlusal planes had moderate correlations.
Humans ; Dental Occlusion ; Cephalometry ; Mandible ; Temporomandibular Joint Disorders/diagnostic imaging* ; Temporomandibular Joint/diagnostic imaging* ; Osteoarthritis/diagnostic imaging* ; Mandibular Condyle

The occurrence of PVNS in the TMJ is very rare. We report a case of PVNS which was misdiagnosed as a parotid tumor at first. CT and conventional radiograph revealed a well difined mass demonstrating higher attenuation than adjacent soft tissue. Erosion, expansion of the cortical plate of the mandibular condyle and sclerotic change beneath the margin of the lesion were also shown. MRI demonstrated well defined mass of very low signal intensity on both T1 and T2 image due to ferromagnetic effect and more clearly delineated the extent of the lesion. Ultrasonogram showed homogenous hypoechoic lesion growing toward both condyle and adjacent soft tissue. Histopathologic findings and characteristic appearance of the various imaging method were discribed and the usefulness of these image for diagnosis and pretreatment evaluation of the PVNS were also discussed on this paper.
Diagnosis ; Diagnostic Imaging* ; Magnetic Resonance Imaging ; Magnets ; Mandibular Condyle ; Synovitis, Pigmented Villonodular* ; Temporomandibular Joint* ; Ultrasonography

OBJECTIVE: To analyze the biomechanical mechanism of mandibular symphyseal fracture combined with bilateral intracapsular condylar fractures using finite element analysis (FEA). METHODS: Maxillofacial CT scans and temporomandibular joint (TMJ) MRI were performed on a young male with normal mandible, no wisdom teeth and no history of TMJ diseases. The three-dimensional finite element model of mandible was established by Mimics and ANSYS based on the CT and MRI data. The stress distributions of mandible with different angles of traumatic loads applied on the symphyseal region were analyzed. Besides, two models with or without disc, two working conditions in occlusal or non-occlusal status were established, respectively, and the differences of stress distribution between them were compared. RESULTS: A three-dimensional finite element model of mandible including TMJ was established successfully with the geometry and mechanical properties to reproduce a normal mandibular structure. Following a blow to the mandibular symphysis with different angles, stress concentration areas were mainly located at condyle, anterior border of ramus and symphyseal region under all conditions. The maximum equivalent stress always appeared on condylar articular surface. As the angle between the external force and the horizontal plane gradually increased from 0° to 60°, the stress on the mandible gradually concentrated to symphysis and bilateral condyle. However, when the angle between the external force and the horizontal plane exceeded 60°, the stress tended to disperse to other parts of the mandible. Compared with the condition without simulating the disc, the stress distribution of articular surface and condylar neck decreased significantly when the disc was present. Compared with non-occlusal status, the stress on the mandible in occlusal status mainly distributed on the occlusal surface, and no stress concentration was found in other parts of the mandible. CONCLUSION When the direction of external force is 60° from the horizontal plane, the stress distribution mainly concentrates on symphyseal region and bilateral condylar surface, which explains the occurrence of symphyseal fracture and intracapsular condylar fracture. The stress distribution of condyle (including articular surface and condylar neck) decreases significantly in the presence of arti-cular disc and in stable occlusal status when mandibular symphysis is under traumatic force.
Finite Element Analysis ; Humans ; Male ; Mandible ; Mandibular Condyle/diagnostic imaging* ; Mandibular Fractures/diagnostic imaging* ; Stress, Mechanical ; Temporomandibular Joint/diagnostic imaging* ; Temporomandibular Joint Disorders

Condylar hyperplasia (CH) of human temporomandibular joint (TMJ) often occurs unilaterally, and causes occlusal disturbance and facial asymmetry. The purpose of this study was to compare the effects of high condylectomy with and without postsurgical orthodontic treatment. Forty patients were diagnosed as having active CH and treated with high condylectomy. Patients in group A (n=24) took the postsurgical orthodontic therapy immediately after surgery, and those in group B (n=16) did not take orthodontic therapy. For both groups, the mandibular ramus height on the affected side was decreased significantly after surgery. Orthodontic treatment promoted maxillary alveolar remodeling significantly by depressing alveolar bone of the affected side and increasing alveolar bone of the nonaffected side. Better improvement for facial midline deviations was observed in group A than in group B. In both groups, the condylar remodeling was observed and manifested by the smoothening of condylar surface and returning of condyle to normal position in glenoid fossa. It was concluded that high condylectomy in the treatment of active CH of TMJ improved the functional occlusion and facial aesthetic. Postsurgical orthodontic therapy could more effectively enhance maxillary alveolar and condylar remodeling, and more rapidly and meticulously establish the stable occlusal and normal position of condyle than the spontaneous remodeling.
Cone-Beam Computed Tomography ; Female ; Humans ; Male ; Mandibular Condyle ; diagnostic imaging ; pathology ; surgery

Objective:To investigate the relationship between idiopathic condylar resorption （ICR） and arch width disorder. Methods:Thirty-two patients with ICR and twenty patients without condylar resorption were enrolled according to the same inclusion criteria. They were divided into experimental group and control group. The experimental group was divided into unilateral ICR group and bilateral ICR group according to the affected side of condylar resorption, and then experimental group was divided into subgroups ICR Ⅰ, ICRⅡand ICR Ⅲ according to the degree of condylar resorption. Patients with no condylar resorption were used as a control group. The width of anterior, middle and posterior segments of dental arch on cone beam computed tomography（CBCT） was measured and the two groups of measured values were statistically analyzed. Results:Compared with the control group, the width of maxillary anterior, middle and posterior segments in ICR group was significantly reduced, and the difference was statistically significant（P<0.01）. But the width of mandibular segment was not significantly different from that in control group（P>0.05）. There was no significant difference in the width of anterior, middle and posterior dental arch between subgroups（P>0.05）. Conclusion:Almost all patients with ICR have malocclusion of maxillary and mandibular arch width, but there is no significant correlation between the malocclusion width and the severity of condylar resorption.
Humans ; Mandibular Condyle/diagnostic imaging* ; Dental Arch ; Bone Resorption ; Mandible ; Malocclusion

OBJECTIVE: To analyze the radiological characteristics and classifications of the cyst-like lesion of condyle in temporomandibular joint (TMJ) by cone beam computed tomography (CBCT). METHODS: The study was conducted retrospectively on TMJ images from 194 patients who underwent CBCT examinations. Location, size, amount, surrounding bone trabecula, cortical bone white line of cyst-like lesion, and the overall condition of the condylar bone were evaluated. According to the overall condition of the condylar bone, the cyst-like lesion of condyle were divided into typesⅠand Ⅱ. The location, size, amount, surrounding bone trabecula, and cortical bone white line of the two types of cyst-like lesions were compared. RESULTS: In 198 condylars of 194 patients, cyst-like lesions were detected in the left side of 94 patients, in the right of 96 patients, and in both sides of 4 patients. The size of lesions ranged from 1.2 mm to 13.5 mm, with an average size of (3.4±1.5) mm. Half of the cyst-like lesions were located underneath the anterior lateral cortical bony layer (99 condylars, 50.0%). Most cyst-like lesions were solitary (149 condylars, 75.3%), while 62.6% (124 condylars) were surrounded by continuous bony white lines. Bone sclerosis could be observed in 160 condylars (80.8%). A total of 132 condyles (66.7%) were accompanied by changes in late-stage osteoarthrosis, while the others were only accompanied by early-stage osteoarthrosis (10 osteoarthrosis, 5.1%) or showed no evidence of osteoarthrosis (56 osteoarthrosis, 28.3%). Statistical difference were observed in the location, amount, and surrounding bone trabecula of the two types of cyst-like lesions. TypeⅠcyst-like lesions had more frequent and bone sclerosis than type Ⅱ, whereas type Ⅱ cyst-like lesions occurred more on condylar internal or condyle neck than typeⅠ. CONCLUSIONS The pathogenesis and mechanism of the two types of cyst-like lesions may be different from each other.
Cone-Beam Computed Tomography ; Cysts ; diagnostic imaging ; Humans ; Mandibular Condyle ; diagnostic imaging ; Retrospective Studies ; Temporomandibular Joint ; diagnostic imaging ; Temporomandibular Joint Disorders ; diagnostic imaging

To investigate three-dimensional morphological features of temporomandibular joint in skeletal malocclusion Class III with different vertical skeletal facial types.
 Methods: A total of 46 adults with skeletal malocclusion Class III were enrolled and allocated into a normal-angle, a high-angle and a low-angle groups. All patients were undergone cone beam computed tomography (CBCT). Images of temporomandibular joint were reconstructed and analyzed by Invivo 5. Nine measurements relevant to the positions and forms of condyle as well as joint spaces were performed.
 Results: Significant differences were not observed between the 2 sides of each group among skeletal malocclusion Class III (P>0.05). Compared with the high-angle and normal-angle patients, the low-angle patients had larger superior spaces, bigger gradients of the articular tublecle, longer condyle, and larger internal spaces between the condyle and the fossa. Compared with the low-angle and normal-angle patients, the high-angle patients had smaller condylar antero-posterior diameters.
 Conclusion: Class III malocclusion patients with different vertical skeletal patterns have different positions and forms of condyles, which should be paid attention to in clinic.
Adult ; Cone-Beam Computed Tomography ; Face ; diagnostic imaging ; Humans ; Image Processing, Computer-Assisted ; Malocclusion, Angle Class III ; diagnostic imaging ; Mandibular Condyle ; diagnostic imaging ; Temporomandibular Joint ; diagnostic imaging

Objective: To investigate the shape and position changes of temporomandibular joint (TMJ) in adult skeletal class Ⅱ malocclusion with high angle patients after vertical mandibular control, and the correlation between vertical mandibular changes and condylar position changes. Methods: Twenty adult skeletal class Ⅱ malocclusion with high angle patients [6 males and 14 females, aged (21.4±2.4) years] who underwent extraction treatment and active vertical control in the Department of Orthodontics, Lanzhou University Stomatological Hospital from October 2017 to November 2020 were selected. Cone-beam CT data of the patient before and after treatment were imported into Invivo Dental 5.0 software for three-dimensional reconstruction and correction, and the vertical index of mandible in reconstructed lateral cephalogram (mandibular plane angle, posterior anterior height ratio, mandibular true rotation angle) were measured. Incisal angle and variables of condyle shape, position and articular fossa shape were measured. Paired t test was performed on the results before and after treatment, and the correlation between mandibular vertical changes and condylar position changes was determined by Pearson correlation coefficient calculation. Results: After treatment, the overbite and overjet were within normal range, and the vertical height of the molars was controlled. Compared with the measurement before treatment, mandibular plane angle and mandibular true rotation angle were decreased by 2.05°±1.22° (t=7.60, P<0.001) and 1.42°±1.92° (t=3.54, P=0.002), respectively. The posterior anterior height ratio was increased by (1.89±3.32)% (t=2.56, P=0.019). After treatment, the mediolateral diameter of condyle, the anteroposterior diameter of condyle, the maximum cross-sectional area of condyle, the height of condyle head, the width of articular fossa, the depth of articular fossa and the articular nodular angle were increased by (0.55±0.76) mm (t=-2.73, P=0.015), (0.27±3.51) mm (t=-3.23, P=0.006), (6.01±7.36) mm² (t=-2.80, P=0.013), (0.33±0.72) mm (t=-2.14, P=0.046), (0.56±0.93) mm (t=-2.37, P=0.032), 0.33 (0.14, 0.51) mm (Z=-2.76, P=0.006) and 1.50°±2.40° (t=-2.44, P=0.028), respectively. The internal condylar space and the external condylar space were decreased by (0.33±0.49) mm (t=2.31, P=0.035) and (0.20±0.23) mm (t=3.58, P=0.003), respectively. Before orthodontic treatment, 6 patients were with anterior displacement of the condyle, 7 patients with central position of the condyle, and 7 patients with posterior displacement of the condyle. After correction, patients who were with central position of the condyle have not changed much. The posterior displaced condyle in 2 patients and anterior displaced condyle in 3 patients became in central position after treatment. The joint space index was closer to the central position in 3 patients with anterior displacement and 3 patients with posterior displacement. The position of condyle in 1 patient with posterior displacement and 1 patient with anterior displacement remained basically unchanged. There was a significant negative correlation between the change of the posterior-anterior height ratio and the change of the internal condylar space in patients (r=-0.52, P=0.019), and a low correlation with the contral condylar space and the external condylar space(r=-0.48, P=0.031; r=-0.47, P=0.035). Conclusions: Skeletal class Ⅱ malocclusion with high angle adult patients achieved normal overbite and overjet and remodeling of condyle and articular fossa occurred after orthodontic treatmnet and vertical control. There was a certain negative correlation between the change of posterior-anterior height ratio and the change of condylar position.
Adult ; Female ; Humans ; Male ; Cone-Beam Computed Tomography ; Malocclusion, Angle Class II/diagnostic imaging* ; Mandible/diagnostic imaging* ; Mandibular Condyle/diagnostic imaging* ; Overbite ; Temporomandibular Joint/diagnostic imaging*

OBJECTIVEThis study investigates the effect of temporomandibular joint osteoarthritis (TMJOA) on different stages of condylar three-dimensional position and provides a theoretical basis for clinical application.

METHODSThe cone beam computed tomography (CBCT) images of 108 TMJOA patients were analyzed and divided into four stages based on the stage standard of osteoarthrosis X-ray performance proposed by Xuchen Ma in 2005. A total of 28 defect-free temporomandibular joint disorders were used as the control group. Differences in condylar position and condylar axis horizontal angle were evaluated and compared.

RESULTSNo significant differences were found in terms of sagittal relationship, but condylar axis horizontal angle showed a significant difference (F = 3.872, P = 0.005). The horizontal angle values of stage 1 in the TMJOA group were lower than those in stages 2 and 3 (P = 0.027, P = 0.000), whereas the horizontal angle values of stage 2 and control groups were lower than those of stage 3 group (P = 0.004, P = 0.047).

CONCLUSIONCondylar horizontal angle differed in each stage of TMJOA, but no significant difference between the parasagittal positions of the condyles was observed in each stage.

Case-Control Studies ; Cone-Beam Computed Tomography ; Humans ; Mandibular Condyle ; Osteoarthritis ; diagnostic imaging ; Temporomandibular Joint ; diagnostic imaging ; pathology ; Temporomandibular Joint Disorders ; diagnostic imaging

OBJECTIVETo evaluate the adoption of the condyle position of patients with extensive tooth wear during occlusal rehabilitation, and the correlation between increased vertical dimensions and the changes of joint spaces.

METHODSTwenty-seven patients (five from Beifang hospital, others from Peking University School and Hospital of Stomatology) with extensive tooth wear were selected and received occlusal rehabilitation treatment. The radiographs of standard Schüllers position were taken before treatment (stage 1), 1 month following delivery of temporary restoration (stage 2), and 1 month following delivery of permanent restoration (stage 3).

RESULTSThe superior, anterior and posterior joint spaces were (3.24 ± 0.16), (2.06 ± 0.11), (1.89 ± 0.13) mm at stage 1; (3.61 ± 0.15), (1.94 ± 0.10), (2.52 ± 0.11) mm at stage 2; (3.49 ± 0.19), (1.93 ± 0.10), (2.40 ± 0.13) mm at stage 3. The posterior joint spaces at stage 2 and stage 3 were significantly larger than that at stage 1(P < 0.01). The superior spaces at stage 2 were significantly larger than that at stage 1 (P < 0.05). No correlations between the increased vertical dimensions and the changes of joint spaces were found in the three stages (P > 0.05).

CONCLUSIONSThe condyle positions in the patients with extensive tooth wear changed after occlusal rehabilitation.

Adult ; Aged ; Aged, 80 and over ; Female ; Humans ; Male ; Mandibular Condyle ; diagnostic imaging ; pathology ; Middle Aged ; Radiography ; Temporomandibular Joint ; diagnostic imaging ; pathology ; Tooth Attrition ; diagnostic imaging ; rehabilitation ; Vertical Dimension