ABSTRACT Functional appliances have been used over a century in clinical orthodontic treatments for skeletal Class II malocclusion patients. Its popularity is attributed to its high patient adaptability and ability to produce rapid treatment changes. The twin block and lip bumper can be combined depending on the patient’s cases. The purpose of therapy with twin block is effective in mandibular growth deficiencies to induce supplementary lengthening of mandibular by stimulating increased growth at the condylar cartilage. The patient was a ten-year-old male patient with skeletal Class II malocclusion. He had a convex facial profile, SNA (sella, nasion, A point) angle of 77.5°, SNB (sella, nasion, B point) angle of 73.0°, ANB (A point, nasion, B point) angle of 4.5°, overjet of 6.5 mm, overbite of 11/41 = 5.0 mm, 21/31 = 4.5 mm, abnormal upper labial frenulum, crossbite in the second left premolar of maxilla, crowded anterior teeth of mandibular, deficiency of mandibular growth, lower lip sucking habit, anterior teeth of maxilla with diastema and proclination. Orthodontic treatment for patient is a combination of twin block and lip bumper appliances. After seven months, frenectomy is used to eliminate and correct the spacing in the frenulum. After 10 months, the patient’s skeletal and profile had improved to skeletal Class I malocclusion, SNA angle of 78.0°, SNB angle of 75.0°, ANB angle of 3.0°, overbite and overjet of 4.0 mm, and the lower lip sucking habit had stopped. Twin block and lip bumper appliances are particularly good alternative treatment in managing selected cases of skeletal Class II malocclusion.
Malocclusion, Angle Class II

OBJECTIVE: To evaluate lower incisor position and bony support between patients with Class II average- and high-angle malocclusions and compare with the patients presenting Class I malocclusions. METHODS: CBCT records of 79 patients were divided into 2 groups according to sagittal jaw relationships: Class I and II. Each group was further divided into average- and high-angle subgroups. Six angular and 6 linear measurements were performed. Independent samples t-test, Kruskal-Wallis, and Dunn post-hoc tests were performed for statistical comparisons. RESULTS: Labial alveolar bone thickness was significantly higher in Class I group compared to Class II group (p = 0.003). Lingual alveolar bone angle (p = 0.004), lower incisor protrusion (p = 0.007) and proclination (p = 0.046) were greatest in Class II average-angle patients. Spongious bone was thinner (p = 0.016) and root apex was closer to the labial cortex in high-angle subgroups when compared to the Class II average-angle subgroup (p = 0.004). CONCLUSIONS: Mandibular anterior bony support and lower incisor position were different between average- and high-angle Class II patients. Clinicians should be aware that the range of lower incisor movement in high-angle Class II patients is limited compared to average- angle Class II patients.
Cone-Beam Computed Tomography ; Humans ; Incisor ; Jaw ; Malocclusion ; Malocclusion, Angle Class II ; Overbite

OBJECTIVETo study the mechanism and applicability of Bite-bumper combined with fixed appliance in treatment of lingual tipping deep bite.

METHODS14 children aged 12-16 years old with lingual tipping deep bite participated in the experiment. Bite-bumper combined with fixed appliance was used to correct the deep bite. Clinic effect was observed. Lateral cephalograms were taken before treatment and after bite opening. The related hard tissues were estimated through the cephalograms.

RESULTS1) The average duration for bite-opening with Bite-bumper and fixed appliance of 14 patients was 28 days. 2) After bite-opening, the changes in length direction of jaw (SNA, SNB, ANB) had no statistical variances. Anterior and posterior facial height (S-Go, ANS-Me) were increased. No significant changes were observed in the ratio of posterior facial height to anterior facial height (S-Go/N-Me), angle of mandibular plane (SN-MP) and Y axis. Labial incline in upper and lower incisors (U1-SN, L1-MP) and interincisa angle (U1-L1) were decreased. The posterior teeth (U6-PP, L6-MP) were extruded and the upper incisors (U1-PP) were intruded. The overbite was decreased.

CONCLUSIONBite-bumper combined with fixed appliance can be used effectively for deep bite correction and improve the short face of patients with lingual tripping deep overbite.

Cephalometry ; Child ; Dental Occlusion ; Humans ; Incisor ; Malocclusion, Angle Class II ; Mandible ; Overbite ; Tooth ; Tooth Movement Techniques

This case report describes the treatment of a 25-year-old woman with a severe open bite. This patient presented a grade Ⅲ open bite, considerably thin alveolar bone, and evident labial buccal and lingual root form. The open bite was corrected by fixed orthodontic treatment and masticatory exercises. However, the increased pressure in the labial muscle caused by lip muscle exercise suppressed the canines, which resulted in the protrusion of the apices of canine roots out of the alveolar bone. Afterward, HX brackets, instead of self-locking, were used and bonded reversely in the occlusal-gingival direction on the upper canines. The lip muscle exercises were decreased. After adjustment, the roots penetrated back into the cancellous bone, the severe open bite was corrected, and a normal overbite and overjet were achieved. ClassⅠcanine and molar relationships were established. The masticatory function and profile were both considerably improved. This case report showed that a severe nonskeletal open bite can be corrected using orthodontic treatments combined with masticatory exercises.
Adult ; Cephalometry ; Female ; Humans ; Malocclusion, Angle Class II ; Open Bite ; therapy ; Overbite ; Tooth Movement Techniques

Increased overbite has always been a challenging orthodontic problem in treating most periodontal-associated problems. This case report described the management of a class II division 2 malocclusion with cover bite without extraction. A 19-year-old female patient came with a chief complaint of irregularities on the anterior teeth. A fixed appliance was placed without extraction. The patient was instructed to use intermaxillary elastic band class II to correct the canine and molar relation. Treatment time was 16 months. A class I canine and molar relation with good interdigitation was achieved. The treatment of class II division 2 malocclusion without extraction in the adult patient showed promising results.
Angle Class II Malocclusion ; Class II Malocclusion ; Malocclusion Class II Division 2 ; Orthodontic Treatment

OBJECTIVEThis study aimed to analyze the condylar position changes produced by functional appliances in class Ⅱ malocclusion by systematic review.

METHODSElectronic search was conducted using Chinese Biomedical Literature Database, China National Knowledge Infrastructure, VIP Database for Chinese Technical Periodicals, Medline, Embase, Pubmed, and Cochrane Central Register of Controlled Trials. Studies on condylar position changes produced by functional appliances in class Ⅱ malocclusion were included. Risk of bias assessment and data extraction of included studies were conducted by two reviewers independently. The meta-analysis was carried out using Revman 5.1.

RESULTSSix studies were included (five high quality and one low quality). The condylar position showed no changes after Herbst treatment. The condylar posterior space after Twin-block treatment averagely increased by 0.31 mm (P<0.000 01), whereas the condylar anterior space averagely reduced by 0.32 mm (P<0.000 01).

CONCLUSIONSTwin-block appliance enables forward movement of the condylar position. This result contributes to the correction of class Ⅱ malocclusion.

Databases, Factual ; Humans ; Malocclusion, Angle Class II

A Brazilian girl aged 14 years and 9 months presented with a chief complaint of protrusive teeth. She had a convex facial profile, extreme overjet, deep bite, lack of passive lip seal, acute nasolabial angle, and retrognathic mandible. Intraorally, she showed maxillary diastemas, slight mandibular incisor crowding, a small maxillary arch, 13-mm overjet, and 4-mm overbite. After the diagnosis of severe Angle Class II division 1 malocclusion, a mandibular protraction appliance was placed to correct the Class II relationships and multiloop edgewise archwires were used for finishing. Follow-up examinations revealed an improved facial profile, normal overjet and overbite, and good intercuspation. The patient was satisfied with her occlusion, smile, and facial appearance. The excellent results suggest that orthodontic camouflage by using a mandibular protraction appliance in combination with the multiloop edgewise archwire technique is an effective option for correcting Class II malocclusions in patients who refuse orthognathic surgery.
Crowding ; Diagnosis ; Diastema ; Female ; Follow-Up Studies ; Humans ; Incisor ; Lip ; Malocclusion* ; Malocclusion, Angle Class II* ; Mandible ; Mandibular Advancement ; Orthognathic Surgery ; Overbite ; Tooth

In order to investigate TMD prevalence in malocclusion patients and to study its relationship with occlusal factors, 205 malocclusion patients (M67, F138, 6Y1M-46Y8M) were examined. The following examinations were carried out, Questionnaire: personal history, TMD symptoms, and the associated factors Clinical examination: TMJ sound and maximum mouth opening Orthopantomogram: condyle abnormalities, length of Co'-Inc' and Co'-Go', ratio Co'-Inc'/Co'-Go', and depth of antegonial notch Transcranial view: limitation of anterior movement of condyle Model: Angle classification, overjet, overbite, midline discrepancy, missing of posterior teeth, posterior crossbite, attrition of palatal cusp of maxillary molars, crowding/spacing The results could be summarized as follows, 1. The prevalence of TMD showed that Helkimo Anamestic Index(Ai) 0 was 46.8%, Ai I was 22.0%, Ai II was 31.2% and subjective symptoms increased with aging (p<0.001) and were frequent in females (p<0.05). 2. Flattening (4.4%) was the most frequent condyle abnormality on Orthopantomgram, and 8.3% of subjects showed some abnormalities on Orthopantomogram. 3. The cases with neck and shoulder pain (p<0.001), clenching, lip biting (p<0.01), and headache (p<0.05) showed higher scores of Ai. 4. Angle class II showed high frequency of condylar abnormalities on Orthopantomogram, and subjects whose palatal cusp of maxillary molars had been attrided had the tendency to show high Ai scores (p<0.05). The other occlusal factors had nothing to do with the symtoms of TMD. 5. In the case that 1)the value of Co'-Inc', Co'-Go' or Co'-Inc'/Co'-Go' were low or 2)the difference of Co'-Go' or Co'-Inc'/Co'-Go' between the right and the left were large, condylar abnormalities were frequently obserbed on Orthopantomogram.
Aging ; Cross-Sectional Studies* ; Female ; Headache ; Humans ; Lip ; Malocclusion* ; Malocclusion, Angle Class II ; Molar ; Mouth ; Neck ; Overbite ; Prevalence* ; Surveys and Questionnaires ; Shoulder Pain ; Temporomandibular Joint ; Tooth

OBJECTIVETo study the association of vertical facial skeletal types and sagittal facial skeletal types with anterior alveolar bone thickness.

METHODSAmong 168 cases with malocclusion in early permanent dentition stage, 93 patients were male and 75 patients were female. All patients (aged 10-14 years) were divided into 9 groups by different facial skeletal types, mandibular anterior alveolar bone thickness in patients' lateral cephalometric films were measured. ANOVA were performed to measurement results with the SPSS 13.0 statistical software.

RESULTSThough sagittal facial skeletal types were the same, there were significant differences between different vertical facial types groups. The order was low-angle group, average-angle group and high-angle group according to the size. A high-angle individual often had a thin anterior alveolar bone while a low-angle individual often had the opposite morphology character. There was no statistical significance between skeletal type I, II and III. But group of skeletal type III also had a thin alveolar bone thickness which had no significant difference with high-angle group. Low-angle group III had no significant difference with average-angle group I and II in alveolar bone thickness.

CONCLUSIONSagittal facial skeletal types have little influence on anterior alveolar morphology, but the vertical facial skeletal types have strong connection with anterior alveolar bone thickness.

Adult ; Cephalometry ; Face ; Female ; Humans ; Male ; Malocclusion ; Malocclusion, Angle Class II ; Malocclusion, Angle Class III ; Mandible

OBJECTIVE: This study aimed to investigate the therapeutic effects and advantages of skeletal class Ⅲ malocclusion treatment by transmission straight wire technique. METHODS: Ninety-seven patients who received treatment for skeletal class Ⅲ malocclusion at the Department of Stomatology, Union Hospital, Tongji Medical College, Huazhong University of Science and Technology from January 2012 to January 2017 were selected for this retrospective study. All these patients refused surgery. They were divided into two groups in accordance with the type of skeletal malocclusion: mild-to-moderate skeletal malocclusion group (-4°≤ANB <0°) and severe skeletal malocclusion group (-8°≤ANB<-4°). Each of the two groups was divided further into two small groups in accordance with the technique used: T group (transmission straight wire technique) and M group (MBT technique). RESULTS: The crossbite of all 59 patients in the mild-to-moderate skeletal malocclusion group was successfully treated. The molars were classified as classⅠrelationship, and the facial profile improved. Significant differences were found in the values of U1/SN angle, L1/MP angle, and Lip-Diff between the T and M groups before and after the treatment (P<0.05). The extent of incisor root resorption was lighter in the T group than in the M group (P<0.05). In the severe skeletal malocclusion group, the crossbite of all 38 patients was cured or partially cured. Fourteen patients showed severe lower anterior teeth inclination (five in the T group and nine in the M group), and the profiles did not significantly improve. Significant differences were observed in the values of U1-NA value, U1/SN angle, L1-NB value, L1/MP angle, LLP, and Lip-Diff between the T and M groups before and after the treatment (P<0.05). The extent of incisor root resorption was lighter in the T group than in the M group (P<0.05). CONCLUSIONS Relative to the MBT technique, the transmission straight wire technique has great advantages in improving facial profile, reducing the compensatory inclination of the upper and lower anterior teeth, and reducing the risk of root resorption in the treatment of skeletal class Ⅲ malocclusion.
Cephalometry ; Humans ; Malocclusion ; Malocclusion, Angle Class II ; Malocclusion, Angle Class III ; Maxilla ; Retrospective Studies