AIM:To establish the quality standard for Pheretima Dispensing Granules.METHODS:Pheretima Dispensing Granules were identified by TLC.The content of hypoxanthine in Pheretima Dispensing Granules was determined by HPLC,and succinic acid by high performance capillary electrophoresis HPCE.RESULTS:Spots obtained from the test solutions had the same color as amino acid reference solution,Pheretima reference substance and the blank solution had no interference.The contents of hypoxanthine were in the range of 1.6 mg/bag-3.3 mg/bag and succinic acid 23.58 mg/bag-35.38 mg/bag in Pheretima Dispensing Granules,respectively.CONCLUSION:The methods of identification and quantification were accurate,realizable and reproducible.It can be used effectively for the quality control for Dispensing Granules.

Aged ; Female ; Humans ; Maxillary Sinus ; parasitology ; Myiasis ; Nasal Cavity ; parasitology

Objective To estimate the acceptability of nurses for division of labor pattern in China.Methods A total of 1 609 nurses in 3 provinces were investigated by self-made questionnaires.The contents of questionnaires included assignment distribution,the acceptability of current division pattern,and whether current division pattern can arouse working enthusiasm of nurses.Results The proportion of those engaged in not only life nursing but also technical nursing was more than 40％,and those only engaged in life nursing was lower than 5％ in nurses with junior college,college or bachelor education degree.The nurses' acceptability of current division pattern of nursing work was poor,most fairly reasonable and very general.The improvement of working enthusiasm for division of labor pattern at present was also poor.The higher educational background except master,the lower improvement of working enthusiasm.Conclusions The poor nurses' acceptability of division of labor pattern was low and impacted working enthusiasm.It suggested to establish a scientific and reasonable division of labor pattern for improvement of nurse working enthusiasm,and promote the overall development of clinical nursing,nursing management,nursing education and nursing scientific research.

Objective The study of loss of heterozygosity (LOH) on chromosome 1p36 was performed to locate the deletion areas probably harboring tumor suppressor genes in invasive ductal breast carcinoma not otherwise specified (IDC NOS).Methods Eighty paired breast cancer/normal tissue DNA samples were examined for LOH on chromosome lp36 using eight polymorphic microsatellite (MS) loci.The PCR products were electrophoresed on 8％ denatured polyacrylamide gel and stained using silver staining.Finally,the data were analysed and compared with the clinicopathological parameters using statistical analysis.Results In 80 IDC NOS,LOH was identified in 45 cases (56.3 ％) at least in one MS locus.MS locus D1S1310 showed the highest rate of LOH [35.7％ (25/70)].Conclusion Chromosome 1p36 might be the highly deleted region.The results of this study indicate that the chromosomal regions 1p36.23-33 might contain tumor suppressor genes associated with human breast carcinomas.

Objective:To investigate the influence of social support to nursing students occupation maturity, provide a new perspective and reasonable suggestions for the cultivation of nursing students occupation planning. Methods:A total of 759 nursing students of different education levels were selected. The Social Support Rating Scale and the Career Maturity Inventory Attitude Scale were used to investigate the influence of social support to nursing students occupation maturity. Results:Different levels of nursing students in subjective support and utiliza-tion of support,the total score difference was statistically significant(P <0. 05),college students social support score lower than the college students. Overall maturity of undergraduate and college nursing students occupation de-gree higher than secondary school students,students occupation maturity in the condition assessment,personal ad-justment,value conception,occupation cognition,self-cognition of these dimensions also exist a significant differ-ence(P<0. 05). Social support and occupation maturity of each factor is correlated in most dimensions. Conclu-sion:The social support of nursing students′ occupation maturity degree has important influence,requirements of professional teachers should integrate education occupation maturity while imparting professional knowledge,lay a solid foundation for nursing students′occupation career planning.

Objective To investigate the iodine nutrition level of the vulnerable population in the high risk region of iodine deficiency disorders for providing a scientific basis for the development of effective preventive measures in Qinghai province. Methods The non-iodized salt coverage rate ＞ 5％ of Delingha city, the coverage rate of iodized salt and the rate of qualified iodized salt ≤80％ of Jiuzhi, Wulan, Nangqian, Zaduo, Geermu,Yushu, Gande, Chengduo, and Dulan counties(cities), the median of urinary iodine ＜ 100 μg/L of Huangyuan county of 11 areas were chosen as monitoring area in 2009. Five townships(towns) were selected by their location of east, west, south, north and center in each county (city), and one school was selected in each township (town),and 60 household salt samples were collected in each school, and quantitatively determined by direct titration of iodine(GB/T 13025.7-1999). Three townships(towns) were selected in each county(city), and two schools were selected in each township(town). The content of urinary iodine of 40 children aged 8 - 10 and 20 women of childbearing age aged 18 - 40 was analyzed by As3+-Ce4+ catalytic spectrophotometry (WS/T 107-2006). ResultsThree thousand two hundred and sixty-one edible salt samples were tested. The coverage rate of iodized salt was 79.88％.The iodized salt qualification rate was 95.16％. The qualified iodized salt consumption rate was 76.02％. The noniodized salt coverage rate was 20.12％. In Nangqian, Zaduo, Yushu and Geermu counties(cities), the non-iodized salt coverage rate was 88.89％, 45.05％, 43.00％ and 12.67％, respectively. The median of urine iodine of 2536 children aged 8 - 10 was 155.8 μg/L, with ≤50 μg/L about 13.6％ (346/2536), ＞ 100 μg/L about 67.5％(1711/2536), and it was 75.1, 94.6 μg/L in Nangqian and Zaduo counties, respectively. The median of urine iodine of 665 women of childbearing age was 129.7 μg/L, with ≤50 μg/L about 22.7％(151/665), ＞ 100 μg/L about 59.2％(394/665), and it was 21.0, 54.7, 72.7 μg/L in Zaduo, Nangqian and Chengduo counties, respectively.Conclusions Insufficient intake of iodine exits in children and women of childbearing age in high risk region of iodine deficiency disorders in Qinghai province, which should be corrected as soon as possible.

Objective To investigate the effects of essential fatty acids(EFA)on the contents of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) in the brain tissues of rats. Methods A total of 30 neonatal rats, 1 month old, were randomly divided into normal, EFA deficiency and fish oil supplement groups and given different feeding stuff for 3 months respectively. The contents of EPA and DHA in brain tissues were determined by high performance liquid chromatography (HPLC). Results As compared with normal group, the contents of EPA and DHA in EFA deficient group were significantly decreased(P

Objective To prepare a bionic artificial bone scaffold using a room temperature three dimensional (3D) printing technique and evaluate its biocompatibility and bioactivity in vitro.Methods A room temperature 3D printing technique was applied to fabricate 3D bionic artificial bone scaffolds using collagen/hydroxyapatite.The physico-chemical structure,porosity and mechanical strength of the scaffolds were assessed.The extract liquid of scaffolds was cocultured with bone mesenchymal stem cells (BMSCs) to evaluate the toxicity of scaffolds.There were 3 experimental groups:blank control with no scaffolds,printed scaffolds group and non-printed scaffolds group.The condition of BMSCs on the scaffolds was observed via scanning electron microscopy(SEM) and immunostaining.3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide (MTT) assay and SEM were applied to monitor the proliferation of BMSCs on the scaffolds.At last,alkaline phosphatase (ALP) activity and mRNA expression levels of osteogenesis-related genes were detected to assess the osteoinductive property of the scaffolds.Results The 3D printed scaffolds fabricated in the present study were characterized by highly interconnected pores which were controllable and even in size.The cross section of the scaffolds presented an irregular honeycomb-like microstructure.The porosity of printed 3D scaffolds (71.14％ ± 2.24％) was significantly higher than that of non-printed scaffolds (59.04％ ±2.98％) (P ＜ 0.05).The physico-chemical structures of the materials were preserved after printing without additional cytotoxicity.The MTT results at 7 and 14 days revealed that the printed scaffolds had a significantly more cell numbers than the non-printed scaffolds(P ＜ 0.05).SEM showed that the BMSCs adhered well onto the printed scaffolds and proliferated and migrated through the pores.Compared with the blank control,the printed scaffolds showed obviously better osteogenic outcomes.Conclusion The 3D bionic artificial bone scaffolds of collagen/hydroxyapatite manufactured by a room temperature 3D printing technique can provide a good extracellular matrix for BMSCs to proliferate and differentiate.

Objective To investigate the therapeutic effects of penetrating resin and fluoride on early enamel caries. Methods Sixty intact bovine incisors were immersed in demineralized solution for 24 hours to make bovine incisor enamel caries.The specimens were divided into four groups(n=15 for each group)according to the treatment methods:control group (CON)-immersion in artificial saliva, DF group-immersion in 0.05% fluoride solution daily, WF group-2% fluoride gel weekly and IC group-resin infiltration.After processing for four and eighe weeks,the microhardness of the surface of each group was measured.After the treatment for four weeks,the depth of penetration and the microhardness of the samples were measured. After 8-week treatment, all samples were reintroduced into the demineralized solution for 24 hours and the microhardness of the samples was measured again.Results Results of microhardness assessment showed that there were no significant differences in baseline values(after white spots)between four groups(P>0.05).After treatment for four weeks the microhardness value reached the peak in IC group. After treatment for eight weeks the microhardness values reached the peak in DF group and WF group.The values of microhardness were significantly higher at different time points in IC group than those of other groups(P<0.05).After 4-week treatment,the percentages of penetration depth were significantly higher in DF,WF and IC groups than those of control group(P<0.01).The penetration depth was significantly higher in IC group than that of DF group and WF group (P<0.05). There was no significant difference in the penetration depth between DF group and WF group(P>0.05).Conclusion For the early enamel caries penetration resin,the penetration percentage is significantly higher than the fluoride treatment.

Objective To prepare biphasic calcium phosphate/polyvinyl alcohol scaffolds by 3D printing at room temperature and explore the effect of 3D scaffolds on in vitro osteogenic differentiation of the bone marrow mesenchymal stem cells (BMSCs).Methods After biphasic calcium phosphate and polyvinyl alcohol solutions were mixed,the biphasic calcium phosphate/polyvinyl alcohol composite scaffolds were prepared by room temperature 3D printing combined with freeze drying technique.Non-printing scaffolds were prepared by injection molding.The surface microstructure,porosity,elastic modulus and hydrophilicity of the 2 sorts of scaffolds were measured.The cytological experiments were carried out in 3 groups (n =3):printed scaffold group,non-printed scaffold group and blank control group (no scaffold).After the BMSCs were seeded onto the scaffolds for 7 and 14 days,the 3 groups were compared in terms of cellular proliferation,alkaline phosphatase activity and expression levels of osteogenesis-related genes.Results 3D composite scaffolds with controllable pore size and porosity were prepared successfully,with an average porosity of 59.6％ ± 3.6％ and an average elastic modulus of 429.3 ± 54.3 kPa.After culture for 7 and 14 days,the cellular absorbance values in the printed scaffold group (0.987 ± 0.047 and 1.497 ± 0.076) were significantly higher than those in the non-printed scaffold group (0.767 ±0.063 and 1.181 ±0.098) (P ＜ 0.05) which were in turn significantly higher than those in the blank control group (0.532 ±0.046 and 0.895 ± 0.062) (P ＜ 0.05).After culture for 7 and 14 days,the ALP activity and expression levels of osteogenesis-related genes in the printed and non-printed scaffold groups showed no significant between-group differences (P ＞ 0.05),but were significantly higher than those in the blank control group (P ＜ 0.05).Conclusions Tissue-engineered composite biphasic calcium phosphate/polyvinyl alcohol scaffolds with controllable pore size and good connectivity can be prepared by freeze-drying and room temperature 3D printing techniques.Co-culture of the scaffolds and BMSCs in vitro promotes adhesion,proliferation and osteogenic differentiation of the cells.