Objective To investigate the effects of Kr üppel-like factor 2 ( KLF2 ) on oxidized low density lipoprotein (ox-LDL) induced expression of microRNA-146a (miR-146a) and proinflammatory cyto-kines (MCP-1 and IL-6) in human umbilical vein endothelial cells (HUVECs).Methods Human umbili-cal vein endothelial cells (HUVECs) were cultured and then stimulated with 50μg/ml ox-LDL for 24 hours. HUVECs were infected with adenovirus vectors over-expressing human KLF2 at an appropriate multiplicity of infection.KLF2-siRNA duplexes were transfected into HUVECs to silence the gene expression .HUVECs were collected at time points of 0 h, 3 h, 6 h, 12 h, 24 h and 48 h after infection.Real-time quantitative-PCR was performed to measure the expression of miR-146a at mRNA level.Silenced endogenous miR-146a using LNA-anti-miR-146 a was transfected into HUVECs with lipofectamine 2000 .The levels of MCP-1 and IL-6 in supernatants were detected by ELISA .Results KLF2 remarkably inhibited the expression of miR-146 a in unstimulated and ox-LDL-stimulated HUVECs in a time-dependent manner .The ox-LDL induced ex-pression of miR-146a, MCP-1 and IL-6 in HUVECs were significantly decreased by KLF2.Silenced expres-sion of miR-146a downr-egulated the ox -LDL induced expression of MCP-1 and IL-6 in HUVECs.Moreover, silenced miR-146 a could partly reverse the inhibitory effects of KLF 2 on ox-LDL induced expression of MCP-1 and IL-6 in HUVECs.Conclusion KLF2 inhibited ox-LDL induced expression of MCP-1 and IL-6 in HUVECs partly through down-regulating the expression of miR-146a.

Biliary Tract Diseases ; Humans ; MicroRNAs

This paper introduced the development of 36-Item Short Form of Health Survey (SF-36), and application of researches in China, especially the applications in gynecological chronic pelvic pain related diseases, such as pelvic inflammatory disease, endometriosis,etc. It would be a tool of assessment for clinical study if combined with the specific disease quality of life questionnaires.

Objective To study the chemical constituents of Paeonia veitchii. Methods Isolation and purification were carried out on repeated silica gel column chromatography. The structures of the compounds were identified by physico-chemical properties and spectral analyses. Results Nine compounds were isolated and identified as paeoniflorin (Ⅰ), hydroxypaeoniflorin (Ⅱ), benzoylpaeoniflorin (Ⅲ), benzoylhydroxypaeoniflorin (Ⅳ), albiflorin (Ⅴ), paeonisothujone (Ⅵ), mudanpinoic acid A (Ⅶ), 2-hydroxybenzyl alcohol (Ⅷ), bis (2-hydroxybenzyl) ether (Ⅸ). Conclusion Compound Ⅸ is obtained from natural products for the first time. Compounds Ⅳ, Ⅵ-Ⅸ are isolated from this plant for the first time.

Mesenchymal stem cells (MSCs) have good immune regulatory function,can inhibit many immune cell proliferation,direct effects on activation and proliferation of T cell,play a role in immune regulation by Treg cells or by the secretion of soluble factors regulating Thl/Th2 secretion and reaction equilibrium,inhibit the inflammation through the anti-inflammatory,regulation of cytokines expression at the same time,so reduce the expression levels of matrix metalloproteinase-2 and-9,which may promote lacrimal gland tissue damage,and thus play a role in immune regulation.MSCs can reduce the autoimmune dry eye clinical index,recovery secretion function of part lacrimal gland.This article reviews the research advances in inmmmne regulation of MSCs on autoimmune dry eye.

BACKGROUND:Perioperative hypothermia may lead to coagulation function for patients undergoing total knee arthroplasty,and an increase in blood loss.OBJECTIVE:To compare the influence of temperature protection with non-temperature protection on coagulation function in patients undergoing total knee arthroplasty.METHODS:Forty ASA Ⅰ-Ⅱ patients scheduled for total knee arthroplasty were randomly divided into temperature protection and non-temperature protection groups (n=20 per group).The patients in the temperature protection group underwent heat-preservation including preheating room temperature,actively blanket warmer,were infused or flushed with fluids of 37 ℃ by heating apparatus;the patients in the non-temperature protection group received full-body-covered cotton quilt only.The nasopharyngeal temperature were detected at postoperative 10 minutes,intraoperative 1 hour and postoperative 1 hour,and 1.25 mL of venous blood were collected to detect the fibrin formation time,blood clot formation time,and maximum amplitude using thrombelastography.Additionally,the intraoperative blood loss and volume of drainage at postoperative 24 hours were recorded.RESULTS AND CONCLUSION:(1) The nasopharyngeal temperature in the non-temperature protection group was significantly lower than that in the temperature protection group at postoperative 1 hour (P ＜ 0.05).(2) The intraoperative blood loss and volume of drainage at postoperative 24 hours in the temperature protection group were significantly less than those in the non-temperature protection group (P ＜ 0.05).(3) Compared with the temperature protection group,fibrin formation time and blood clot formation time at intraoperative and postoperative 1 hour were significantly lengthened,and maximum amplitude at postoperative 1 hour was significantly shortened in the non-temperature protection group (P ＜ 0.05).(4) These findings show that intraoperative hypothermia can weaken platelet function,inhibit coagulation factor activity,and increase the amount of blood loss and drainage.In the meanwhile,heat-preservation is able to reduce the loss of body heat,improve coagulation function and reduce blood loss for patients undergoing knee replacement.

OBJECTIVETo evaluate the influence of eugenol-containing and resin-containing endodontic sealers on the bond strength of fiber posts using different strategies of root canal irrigation.

METHODSForty-eight mandibular premolars were endodontically treated. The specimens were randomly assigned into two groups according to different endodontic sealers. Group A used Endofil (eugenol-containing endodontic sealer), and group B used AH-plus (resin-containing endodontic sealer). After post space preparation, each group was randomly assigned into three subgroups according to the strategies of root canal irrigation (eight premolars in each subgroup). Group Al and B1: 0.9%NaCl irrigation; Group A2 and B2: 17% ethylene diamine tetraacetic acid (EDTA)+5.25%NaClO+0.9%NaCl irrigation; Group A3 and B3: ultrasonic agitation associated with 1 7%EDTA+5.25%NaClO+0.9%NaCl. One week after the cementation of fiber posts using RelyX™ Unicem, a push-out test was performed to measure the bond strength of the posts. The microstructure of the root canal surface was examined under scanning electron microscope (SEM).

RESULTSThe bond strengths of the six groups were as follows: Al (7.96±2.23) MPa, A2 (9.95±2.89) MPa, A3 (18.88±3.69) MPa, B1 (11.41±3.71) MPa, B2 (14.00±4.04) MPa, and B3 (19.14±3.27) MPa. Statistical analysis revealed a significant interaction between the different endodontic sealers and the strategies of root canal irrigation (P<0.05). Lower bond strength was found in group Al but not in group BI (P<0.05), and the same result was revealed when comparing group A2 and B2. No significant difference was observed between group A3 and B3 (P>0.05). SEM showed that the root canal in group A3 and B3 achieved the cleanest surface with nearly all dentine tubules opened.

CONCLUSIONThe eugenol-containing endodontic sealer can impair the bond strength of fiber posts compared with the resin-containing sealer when the root canal is irrigated by 0.9% NaCl or 17%EDTA+5.25%NaClO+0.9%NaC. No difference was observed between the two sealers when using 17%EDTA+5.25% NaCIO+0.9%NaCl combined with ultrasonic irrigation.

Bicuspid ; Cementation ; Dental Bonding ; Dental Pulp Cavity ; Dental Stress Analysis ; Dentin ; Humans ; Post and Core Technique ; Root Canal Filling Materials ; Root Canal Irrigants ; Root Canal Therapy

OBJECTIVEThis study aimed to investigate the influence of coping material and porcelain firing on the marginal and internal fit of computer-aided design/computer-aided manufacturing (CAD/CAM) of zirconia ceramic implant- and titanium ceramic implant-supported crowns.

METHODSZirconia ceramic implant (group A, n = 8) and titanium metal ceramic implant-supported crowns (group B, n = 8) were produced from copings using the CAD/CAM system. The marginal and internal gaps of the copings and crowns were measured by using a light-body silicone replica technique combined with micro-computed tomography scanning to obtain a three-dimensional image. Marginal gap (MG), horizontal marginal discrepancy (HMD), and axial wall (AW) were measured. Statistical analyses were performed using SPSS 17.0.

RESULTSPrior to porcelain firing, the measurements for MG, HMD, and AW of copings in group A were significantly larger than those in group B (P < 0.05). After porcelain firing, the measurements for MG of crowns in group A were smaller than those in group B (P < 0.05), whereas HMD and AW showed no significant difference between the two groups (P > 0.05). Porcelain firing significantly reduced MG (P < 0.05) in group A but significantly increased MG, HMD, and AW in group B (P < 0.05) HMD and AW were not influenced by porcelain firing in group A (P > 0.05).

CONCLUSIONThe marginal fits of CAD/CAM zirconia ceramic implant-supported crowns were superior to those of CAD/CAM titanium ceramic-supported crowns. The fits of both the CAD/CAM zirconia ceramic implant- and titanium ceramic implant-supported crowns were obviously influenced by porcelain firing.

Ceramics ; Computer-Aided Design ; Crowns ; Dental Porcelain ; Dental Prosthesis Design ; Humans ; Titanium ; X-Ray Microtomography ; Zirconium

OBJECTIVEThis study investigated the influence of different designs and porcelain/glaze firing on the marginal and internal fit of three kinds of computer aided design/computer aided manufacturing (CAD/CAM) zirconia ceramic implant-supported crowns.

METHODSThree groups of zirconia ceramic implant-supported crowns with different designs were produced from copings by using a Cercon CAD/CAM system (n = 8). The first two groups comprised double-layer crowns (zirconia coping + veneer) with regular (Group A) and full circumferential zirconia-collar marginal designs (Group B). The third group was composed of anatomic single-layer zirconia crowns without cores (Group C). Initially, the marginal and internal gaps of the copings and crowns were individually replicated by light-body silicon and then measured by micro-computed tomography scanning before and after porcelain/glaze firing. Five measurements were employed: vertical marginal gap (MG); horizontal marginal discrepancy (HMD); chamfer area (CA); axial wall (AW); and axial-occlusal transition area (AOT). Statistical analyses were performed by SPSS 17.0.

RESULTSHMD measurements in Group A were statistically higher than those in Groups B and C (P < 0.05), regardless of whether the values were obtained before or after porcelain/glaze firing. By contrast, the HIMD measurements in Groups B and C showed no significant difference (P > 0.05). Moreover, no differences were noted in MG, CA, AW, and AOT among the three groups (P > 0.05). All the measurements in the three groups showed no significant change after porcelain/glaze firing (P > 0.05), except for MG in Group A, which significantly decreased (P < 0.05).

CONCLUSIONThe marginal fits of the double-layer crowns with full circumferential zirconia-collar and the anatomic single-layer zirconia crowns were superior to that of the double-layer crowns with regular margins. The MG of the crowns with regular margins was obviously influenced by porcelain firing.

Computer-Aided Design ; Crowns ; Dental Porcelain ; Dental Prosthesis Design ; X-Ray Microtomography ; Zirconium

OBJECTIVETo evaluate the effect of different auxiliary resistance forms on the resistance and marginal fitness of complete crowns for short molar preparations.

METHODSA total of 70 Nissin resin teeth were prepared with 20° total occlusal convergence, 2.5 mm of occlusocervical height, and a shallow finish line on a milling machine. The milled preparations were then randomly assigned to 7 groups of 10. The first group was used as the control group. A total of 30 dies were modified by preparing interproximal grooves with angles of 0°, 6°, and 20° centered on the mesial and distal surfaces of the dies. The rest of the teeth were prepared with occlusal holes in the center of the occlusal surface milled with the same burs to form 0°, 6°, and 20° holes. Cobalt-chromium copings were fabricated for all specimens. The marginal gap of specific points on the axial surface was measured before and after cementation. The resistance of each specimen was evaluated by applying an external force at an angle of 45° to the long axis of the die by using a universal testing machine in a lingual to buccal direction. The maximum force applied before crown dislodgement was measured. Data were analyzed using the SAS 9.2 software.

RESULTSThe results showed that the 0° groove, 0° hole, and 6° hole were effective in improving the resistance of the complete crowns (P<0.05). The 0° groove, 6° groove, 0° hole, 6° hole, and 20° hole had significant difference with the control group in terms of marginal discrepancies (P<0.05).

CONCLUSIONAuxiliary resistance forms with less degree indicate greater resistance force but worse marginal fitness. In clinical practice, if the resistance of a preparation is enough, the auxiliary resistance forms should be avoided from being used.

Cementation ; Crowns ; Dental Prosthesis Design ; Dental Prosthesis Retention ; Humans ; Molar ; Tooth Crown