The changes of the hemorheology, plasma cholesterol and albumin and clinicaleffects in 36 children with refractory nephrosis after treatment with polysaccharide sulfate (PSS) were observed. The results showed that the indices of hemorheology and the plasma cholesterol decreased obviously and the albumin increased obviously than the control group ( P

OBJECTIVEThis study investigated the influence of different designs and porcelain/glaze firing on the marginal and internal fit of three kinds of computer aided design/computer aided manufacturing (CAD/CAM) zirconia ceramic implant-supported crowns.

METHODSThree groups of zirconia ceramic implant-supported crowns with different designs were produced from copings by using a Cercon CAD/CAM system (n = 8). The first two groups comprised double-layer crowns (zirconia coping + veneer) with regular (Group A) and full circumferential zirconia-collar marginal designs (Group B). The third group was composed of anatomic single-layer zirconia crowns without cores (Group C). Initially, the marginal and internal gaps of the copings and crowns were individually replicated by light-body silicon and then measured by micro-computed tomography scanning before and after porcelain/glaze firing. Five measurements were employed: vertical marginal gap (MG); horizontal marginal discrepancy (HMD); chamfer area (CA); axial wall (AW); and axial-occlusal transition area (AOT). Statistical analyses were performed by SPSS 17.0.

RESULTSHMD measurements in Group A were statistically higher than those in Groups B and C (P < 0.05), regardless of whether the values were obtained before or after porcelain/glaze firing. By contrast, the HIMD measurements in Groups B and C showed no significant difference (P > 0.05). Moreover, no differences were noted in MG, CA, AW, and AOT among the three groups (P > 0.05). All the measurements in the three groups showed no significant change after porcelain/glaze firing (P > 0.05), except for MG in Group A, which significantly decreased (P < 0.05).

CONCLUSIONThe marginal fits of the double-layer crowns with full circumferential zirconia-collar and the anatomic single-layer zirconia crowns were superior to that of the double-layer crowns with regular margins. The MG of the crowns with regular margins was obviously influenced by porcelain firing.

Computer-Aided Design ; Crowns ; Dental Porcelain ; Dental Prosthesis Design ; X-Ray Microtomography ; Zirconium

OBJECTIVETo evaluate the effect of different auxiliary resistance forms on the resistance and marginal fitness of complete crowns for short molar preparations.

METHODSA total of 70 Nissin resin teeth were prepared with 20° total occlusal convergence, 2.5 mm of occlusocervical height, and a shallow finish line on a milling machine. The milled preparations were then randomly assigned to 7 groups of 10. The first group was used as the control group. A total of 30 dies were modified by preparing interproximal grooves with angles of 0°, 6°, and 20° centered on the mesial and distal surfaces of the dies. The rest of the teeth were prepared with occlusal holes in the center of the occlusal surface milled with the same burs to form 0°, 6°, and 20° holes. Cobalt-chromium copings were fabricated for all specimens. The marginal gap of specific points on the axial surface was measured before and after cementation. The resistance of each specimen was evaluated by applying an external force at an angle of 45° to the long axis of the die by using a universal testing machine in a lingual to buccal direction. The maximum force applied before crown dislodgement was measured. Data were analyzed using the SAS 9.2 software.

RESULTSThe results showed that the 0° groove, 0° hole, and 6° hole were effective in improving the resistance of the complete crowns (P<0.05). The 0° groove, 6° groove, 0° hole, 6° hole, and 20° hole had significant difference with the control group in terms of marginal discrepancies (P<0.05).

CONCLUSIONAuxiliary resistance forms with less degree indicate greater resistance force but worse marginal fitness. In clinical practice, if the resistance of a preparation is enough, the auxiliary resistance forms should be avoided from being used.

Cementation ; Crowns ; Dental Prosthesis Design ; Dental Prosthesis Retention ; Humans ; Molar ; Tooth Crown

OBJECTIVETo evaluate the influence of eugenol-containing and resin-containing endodontic sealers on the bond strength of fiber posts using different strategies of root canal irrigation.

METHODSForty-eight mandibular premolars were endodontically treated. The specimens were randomly assigned into two groups according to different endodontic sealers. Group A used Endofil (eugenol-containing endodontic sealer), and group B used AH-plus (resin-containing endodontic sealer). After post space preparation, each group was randomly assigned into three subgroups according to the strategies of root canal irrigation (eight premolars in each subgroup). Group Al and B1: 0.9%NaCl irrigation; Group A2 and B2: 17% ethylene diamine tetraacetic acid (EDTA)+5.25%NaClO+0.9%NaCl irrigation; Group A3 and B3: ultrasonic agitation associated with 1 7%EDTA+5.25%NaClO+0.9%NaCl. One week after the cementation of fiber posts using RelyX™ Unicem, a push-out test was performed to measure the bond strength of the posts. The microstructure of the root canal surface was examined under scanning electron microscope (SEM).

RESULTSThe bond strengths of the six groups were as follows: Al (7.96±2.23) MPa, A2 (9.95±2.89) MPa, A3 (18.88±3.69) MPa, B1 (11.41±3.71) MPa, B2 (14.00±4.04) MPa, and B3 (19.14±3.27) MPa. Statistical analysis revealed a significant interaction between the different endodontic sealers and the strategies of root canal irrigation (P<0.05). Lower bond strength was found in group Al but not in group BI (P<0.05), and the same result was revealed when comparing group A2 and B2. No significant difference was observed between group A3 and B3 (P>0.05). SEM showed that the root canal in group A3 and B3 achieved the cleanest surface with nearly all dentine tubules opened.

CONCLUSIONThe eugenol-containing endodontic sealer can impair the bond strength of fiber posts compared with the resin-containing sealer when the root canal is irrigated by 0.9% NaCl or 17%EDTA+5.25%NaClO+0.9%NaC. No difference was observed between the two sealers when using 17%EDTA+5.25% NaCIO+0.9%NaCl combined with ultrasonic irrigation.

Bicuspid ; Cementation ; Dental Bonding ; Dental Pulp Cavity ; Dental Stress Analysis ; Dentin ; Humans ; Post and Core Technique ; Root Canal Filling Materials ; Root Canal Irrigants ; Root Canal Therapy

OBJECTIVEThis study aimed to investigate the influence of coping material and porcelain firing on the marginal and internal fit of computer-aided design/computer-aided manufacturing (CAD/CAM) of zirconia ceramic implant- and titanium ceramic implant-supported crowns.

METHODSZirconia ceramic implant (group A, n = 8) and titanium metal ceramic implant-supported crowns (group B, n = 8) were produced from copings using the CAD/CAM system. The marginal and internal gaps of the copings and crowns were measured by using a light-body silicone replica technique combined with micro-computed tomography scanning to obtain a three-dimensional image. Marginal gap (MG), horizontal marginal discrepancy (HMD), and axial wall (AW) were measured. Statistical analyses were performed using SPSS 17.0.

RESULTSPrior to porcelain firing, the measurements for MG, HMD, and AW of copings in group A were significantly larger than those in group B (P < 0.05). After porcelain firing, the measurements for MG of crowns in group A were smaller than those in group B (P < 0.05), whereas HMD and AW showed no significant difference between the two groups (P > 0.05). Porcelain firing significantly reduced MG (P < 0.05) in group A but significantly increased MG, HMD, and AW in group B (P < 0.05) HMD and AW were not influenced by porcelain firing in group A (P > 0.05).

CONCLUSIONThe marginal fits of CAD/CAM zirconia ceramic implant-supported crowns were superior to those of CAD/CAM titanium ceramic-supported crowns. The fits of both the CAD/CAM zirconia ceramic implant- and titanium ceramic implant-supported crowns were obviously influenced by porcelain firing.

Ceramics ; Computer-Aided Design ; Crowns ; Dental Porcelain ; Dental Prosthesis Design ; Humans ; Titanium ; X-Ray Microtomography ; Zirconium

BACKGROUND:Perioperative hypothermia may lead to coagulation function for patients undergoing total knee arthroplasty,and an increase in blood loss.OBJECTIVE:To compare the influence of temperature protection with non-temperature protection on coagulation function in patients undergoing total knee arthroplasty.METHODS:Forty ASA Ⅰ-Ⅱ patients scheduled for total knee arthroplasty were randomly divided into temperature protection and non-temperature protection groups (n=20 per group).The patients in the temperature protection group underwent heat-preservation including preheating room temperature,actively blanket warmer,were infused or flushed with fluids of 37 ℃ by heating apparatus;the patients in the non-temperature protection group received full-body-covered cotton quilt only.The nasopharyngeal temperature were detected at postoperative 10 minutes,intraoperative 1 hour and postoperative 1 hour,and 1.25 mL of venous blood were collected to detect the fibrin formation time,blood clot formation time,and maximum amplitude using thrombelastography.Additionally,the intraoperative blood loss and volume of drainage at postoperative 24 hours were recorded.RESULTS AND CONCLUSION:(1) The nasopharyngeal temperature in the non-temperature protection group was significantly lower than that in the temperature protection group at postoperative 1 hour (P ＜ 0.05).(2) The intraoperative blood loss and volume of drainage at postoperative 24 hours in the temperature protection group were significantly less than those in the non-temperature protection group (P ＜ 0.05).(3) Compared with the temperature protection group,fibrin formation time and blood clot formation time at intraoperative and postoperative 1 hour were significantly lengthened,and maximum amplitude at postoperative 1 hour was significantly shortened in the non-temperature protection group (P ＜ 0.05).(4) These findings show that intraoperative hypothermia can weaken platelet function,inhibit coagulation factor activity,and increase the amount of blood loss and drainage.In the meanwhile,heat-preservation is able to reduce the loss of body heat,improve coagulation function and reduce blood loss for patients undergoing knee replacement.

OBJECTIVE To study the effects of indwelling time of femoral vein catheter on bacterium colonization in patients with hemodialysis treatment,then to choose the optimal one from infection prevention viewpoint.METHODS The patients were divided randomly into three groups according to their catheter indwelling time(group A2 weeks)(20 patients in each group).Samples from skin and the tip of the catheter were cultured,and compared the colony number and strain distribution.RESULTS There was bacterium colonization on punctured skin and the tip of the catheter after using it for a long time.The longer it was,the higher the positive rate was.The positive rate of bacterium colonization in groups B,and C was 25% vs 100%(P

Objective To evaluate the efficacy of pleth variability index (PVI) in guiding volume therapy in the patients undergoing thoracoscopic surgery.Methods Forty patients of both sexes, aged 18-64 yr, with body mass index＜35 kg/m2 , of American Society of Anesthesiologists physical status I or Ⅱ ,scheduled for elective thoracoscopic lobectomy, were randomized into 2 groups (n =20 each) : control group (group C) and PVI group.During induction of anesthesia, multiple electrolyte solution was infused rapidly as a bolus of 250 ml, followed by a 2-8 ml · kg-1 · h-1 infusion.In group C, 6％ hydroxyethyl starch 130/0.4 and sodium chloride injection 50 ml and metaraminol 0.5 mg were administered to maintain mean arterial pressure ≥ 65 mmHg.In group PVI, 6％ hydroxyethyl starch 130/0.4 and sodium chloride injection 50 ml and metaraminol 0.5 mg were administered to maintain PVI ≤ 13％ and mean arterial pressure ≥ 65 mmHg.Immediately after the beginning of one-lung ventilation (T1) , immediately after the termination of one-lung ventilation (T2) and at 1 h after surgery (T3) , arterial oxygen saturation were recorded, and arterial blood samples were collected for blood gas analysis, and for determination of lactic acid concentrations.The blood creatinine concentrations were measured at 24 h before and after surgery.The fulid balance was recorded.Results The amount of colloid solution infused, total volume of fluid infused and lactic acid concentrations at T3were significantly lower in group C than in group PVI.There were no significant differences in the amount of crystralloid solution infused, urine volume, blood loss, arterial oxygen saturation at each time point, and blood creatinine concentrations at 24 h before and after surgery between the two groups.Conclusion PVI-guided volume therapy can not only maintain adequate blood volume and tissue perfusion, but also reduce the amount of fluid infused, and is helpful in mitigating lung water overload when used for the patients undergoing thoracoscopic surgery.

Objective To study the real?time dose verification with 2D array ion chamber array in volumetric modulated arc therapy ( VMAT) with a 2D array ion chamber array. Methods The 2D ion chamber array was fixed on the panel of electronic portal imaging device (EPID). Source?detector distance (SDD) was 140 cm. 8 mm RW3 solid water was added to the 2D array to improve the signal noise ratio. Patient plans for esophageal, prostate and liver cancers were selected to be delivered on the cylindrical Cheese phantom 5 times in order to validate the reproducibility of doses. Real?time patient transit dose measurements were performed at each fraction. Dose distributions were evaluated using gamma index criteria of 3 mm DTA and 3% dose difference referred to the first time result. Results The gamma index pass rate in the Cheese phantom were about 98%;the gamma index pass rate for esophageal, prostate and liver cancer patient were about 92%, 92% and 94%, respectively. Gamma pass rate for all single fraction were more than 90%. Conclusions The 2D array is capable of monitoring the real time transit doses during VMAT delivery. It is helpful to improve the treatment accuracy.

OBJECTIVE Study the kidney toxic effects caused by burning coal endemic arsenism in rats,application bench mark dose (BMD) method to investigate the bench mark dose of urinary arsenic (UAs)and the changes in bio markers of renal function.METHODS Wistar rats were fed for 90 d with arsenic 0,25,50,100 mg·kg -1 conta minated feed.Urinary arsenic,kidney arsenic and renal function indicators were determined,and routine pathological and fibrosis of kidney were exa mined.UAs as the exposure bio marker,Uβ2-MG,UNAG and UALB for the effect bio markers,application bench mark dose method to calculate the BMD and BMDL of UAs for each effect bio markers.RESULTS UAs,KAs, Uβ2-MG,UNAG,UALB levels of rats in arsenic 100 mg·kg -1 group were increased than normal group (P <0.05);In light microscope,the results of HE staining of rat kidney in all arsenic dose groups showed infla mmatory cell infiltration,renal tubular epithelial cell swelling,renal interstitial capillary dila-tion,congestion and other varying degrees pathological changes,and the results of masson staining showed varying degrees of tubulointerstitial fibrosis;UAs as the exposure bio marker,Uβ2-MG,UNAG, UALB for the effects of mark,the BMD and BMDL of UAs for Uβ2-MG,UNAG,UALB were calculated, the BMD values were 998.9,1213.5,1386.9 μg·g -1 Cr,the BMDL values were 660.5,803.6 and 909. 4 μg·g -1 Cr,respectively.CONCLUSION Burning coal arsenic pollution can cause kidney da mage in rats,mini mal change nephropathy may be the pri mary pathological in the coal arsenic conta mination of kidney da mage.The BMD and BMDL of UAs were 998.9,660.5 μg·g -1 Cr,the early changes of renal function of burning coal arsenism in rats;it is reco mmended to use the more sensitive bio markers Uβ2-MG to calculate the biological exposure li mits on renal injury caused by arsenic.