OBJECTIVEThis study aims to investigate the color stability of ceromer with different thicknesses and different types of resin adhesive materials after accelerated aging and provide references for clinical application and selections.

METHODSNine groups of experimental samples were used, and each group contained five samples. We made joint samples with ceromer having three different thicknesses (1.00, 0.75, 0.50 mm) combined with three different resin adhesive materials (RelyX Veneer, RelyX Unicem, Filtek Z350 Flow), respectively. All samples were placed into Xenon Lamp Aging Instrument to implement accelerated aging. Spectrophotometer was used to measure the lightness (L*), red green color value (a*), and blue yellow color value (b*) of all samples before and after accelerated aging. The change of lightness (ΔL), red green color value (Δa), blue yellow color value (Δb), and color variation (ΔE) were also calculated. We investigated the influence of ceromer veneer thicknesses and resin adhesive material types on color variation by two-factor analysis of variance.

RESULTSThe thickness and type factors showed significant influence on ΔE values, and exhibited interactions (P < 0.05). The ΔE values of all experimental groups were lower than 3.3. After the accelerated aging process, all L*, a*, and b* values of the experimental groups decreased and the ΔL values were lower than 2.0.

CONCLUSIONCeromer veneer thickness and resin adhesive material types could affect the color stability of ceromer veneer and resin adhesive materials. The changes in lightness and color in ceromer veneer and resin adhesive materials are considered clinically acceptable after accelerated aging.

BACKGROUND: Interleukin-1 (IL-1β) and intercellular adhesion molecule-1 (ICAM-1 ) can mediate neutrophilic infiltration, which is closely relevant to cerebral ischemia-reperfusion injury.OBJECTIVE: To investigate the effect of physcion on cerebral inflammatory reaction after ischemia-reperfusion injury.DESIGN: A completely randomized study based on animals.SETTING: Neurological department in a university hospital.MATERIALS: From September to December 2003, the study was conducted in the Animal Laboratory, Hebei Staff and Workers Medical College. Totally 91 healthy male SD rats, supplied by Laboratory Animal Center of Hebei Medical University, were used in the experiments. They were divided into sham operation (SO) group, ischemia-reperfusion group, normal control group, 20 mg/kg physcion group and 40 mg/kg physcion group.Each of the former two groups would be divided into 4 subgroups named as the 6th-hour-after-reperfusion group, the 12th-hour-after-reperfusion group, the 24th-hour-after-reperfusion group and the 48th-hour-after-reperfusion group. Each of the latter two groups were divided into 2 subgroups named as the 12thhour-after-reperfusion group and the 24th-hour-after-reperfusion group. Each subgroup contained 7 rats.INTERVENTIONS: Middle cerebral artery occlusion model (MCAO model) was applied, and IL-1β was measured by radioimmunoassay and ICAM-1 was detected by immunohistochemical staining.MAIN OUTCOME MEASUREMENTS: The IL-1 β level and the positive expression of ICAM-1 in the rats' cerebella were observed.RESULTS: Cerebral ischemia-reperfusion injury in the rats reached its peak 6 hours after reperfusion, and then it decreased gradually. In the 12-hour-after-reperfusion subgroup amd the 24-hour-after-reperfusion subgroup of the 40 mg/kg physcion group, and the 12-hour-after-reperfusion subgroup of the 20 mg/kg physcion group, IL-1β in the injured parts of the cerebella decreased dramatically, compared with MCAO model controls ( P＜ 0.01 ). In the normal control group and SO group, a small quantity of ICAM-1 was detected in rat' s cerebral cortex, and some fulvous staining substance was observed in the plasma and membrane of cerebral vascular endothelium cells. In the cerebral ischemia-reperfusion injury group, positive staining substance could be observed 24 hours after the reperfusion, then darkened gradually (integral absorbency value: 31.89 ± 4.38, area density value: 0. 018 5 ± 0. 003 1). In the 12-hour-after-reperfusion subgroup of the 40 mg/kg physcion group (integral absorbency value: 13.33 ±6. 12, area density value: 0. 007 6 ± 0. 002 2) and the 24-hour-after-reperfusion subgroup of the 40 mg/kg physcion group (integral absorbency value: 20.04 ±4.65,area density value: 0. 012 9 ±0. 003 6), and in the 24-hour-after-reperfusion subgroup of the 20 mg/kg physcion group (integral absorbency value:23.73 ±4.51 area density value: 0. 014 1 ±0. 003 8), expressions of ICAM-1 around the infarctions significantly decreased as compared with those in the MCAO model controls respectively ( P ＜ 0.01 or P ＜ 0.05).CONCLUSION: Physcion tends to decrease the expressing of IL-1β and ICAM-1 in a cerebellum after ischemia-reperfusion injury, thus, it may help alleviate the ischemia-reperfusion injury.

Objective To study the value of the diameters of fetal umbilical artery and umbilical vein in early prenatal screening program for thalassemia by ultrasound.Methods A total of 120 cases of singleton pregnant with thalassemia at 12- 28 gestational weeks were detected by ultrasound,328 cases of normal singleton pregnant at 12 - 28 gestational weeks were selected as controls.The diameters of fetal umbilical artery and umbilical vein were tested and compared between the two groups.The diagnostic values were evaluated by ROC curve.Results At 12 - 15+6 gestational weeks,the diameters of umbilical artery and umbilical vein of thalassemia group were larger than those of control group(P ＜0.05).At 16 - 19+6 gestational weeks, the diameter of umbilical vein of thalassemia group was larger than that of control group,the differences were significant (P ＜0.05).The cutoff threshold of the diameter of fetal umbilical artery was 1.80 mm,the diameter of fetal umbilical vein was 2.95 mm at 12 - 15+6 gestational weeks,the diameter of fetal umbilical vein was 3.80 mm at 16- 19+6 gestational weeks,which were obtained by ROC analysis.The sensitivity of this cutoff threshold to identify thalassemia were 83.3％, 83.3％, 47.8％,respectively, while the specificity were 90.5 ％, 95.2 ％, 85.4％, respectively.Conclusions The diameters of fetal umbilical artery and umbilical vein detected by ultrasound have great value on early prenatal screening of thalassemia, these indexes can be used as an important factors in early prenatal screening of thalassemia.

Systemic lupus erythematosus (SLE) is a multiple organ autoimmune disorder, including the liver, but the possible reason in impairment in the liver is still unclear. Our present study assessed alterations of transcription factor Foxp3(+) regulatory T cells (Tregs) and several other immune molecules [programmed cell death 1 and its ligand (PD1 and PD-L1), and interleukin 10 (IL-10) and transform growth factor β (TGF-β)] in the liver and other major organs of lupus-prone BXSB mice by flow cytometry, real-time quantitative reverse transcription PCR, and enzyme-linked immunosorbent assay. Results showed that both frequency and number of Foxp3(+) Tregs were dramatically reduced in the thymus, spleen and kidney of the BXSB mice (P<0.05), but those in the liver were kept in nearly normal range, when compared to negative control C57BL/6 mice. In comparison to control mice, the mRNA levels of Foxp3, PD1 and PD-L1 were significantly decreased in the kidneys of BXSB mice (P<0.05), but there was no significant difference in the livers of the BXSB mice (P>0.05). Protein levels of IL-10 and TGF-β in serum showed no significant difference between BXSB and C57BL/6 mice, but were significantly increased in the kidneys and livers of BXSB mice as compared with those in C57BL/6 mice (P<0.05). These results suggest that reduced Foxp3(+) Tregs are involved in the pathogenesis of SLE in BXSB mice, and relatively higher number of these cells in the livers than in the other target organs could constitute a protective mechanism against hepatic lesions in lupus-prone mice, which may provide insights into development of new therapeutic approaches in SLE patients.

Objective To study effect of bufalin on invasion and metastasis of gastric cancer cells and related mechanism.Methods AGS human gastric cancer cell line was used for in vitro experiments.Cultured cells were treated by negative control group,bufalin group and oxaliplatin group.Cell proliferation was determined by MTT.Invasion and metastasis were observed by Wound-Healing Assay and Transwell Assay.Expression levels of E-cadherin,matrix metalloproteinases (MMP)-2,MMP-9 were detected by Western blotting.Results Bufalin was found to significantly inhibit the proliferation of AGS cells in a dose and time dependent manner.Wound-Healing Assay and Transwell Assay showed that as compared with the blank control group,bufalin inhibited invasion and metastasis of AGS cells (P＜ 0.05),but there was no statistically significant difference between bufalin group and oxaliplatin group (P＞0.05).Western blotting showed the expression of E-cadherin was increased in bufalin group as compared with the blank control group while the expression levels of MMP-9 and MMP-2 were down-regulated (P＜0.05),but there was no statistically significant difference between bufalin group and oxaliplatin group (P＞ 0.05).Conclusion Bufalin has anti-cancer activity on gastric cancer cells,and it has the ability of inhibiting cancer cell invasion and metastasis,and regulating the expression of some related gene.

Objective To explore the influence of processing depth of verb comprehension on the pro-cess of sensorimotor simulation of verbs and its automatization characteristics.Methods Thirty-six com-mon college students were selected,and required to complete verb semantic judgment tasks of Experi-ment 1 and non-semantic judgment tasks of Experiment 2.The changes in hand and foot action out-puts were also observed.Results In Experiment 1,in semantic judgment tasks,the reaction time of leg-related verbs was significantly shorter than for hand-related verbs(P=0.001),with no significant differences in true-false word judgment tasks.Moreover,in Experiment 2,no significant interaction ef-fect was found between verb types and action execution(P=0.199).Conclusion The sensorimotor simula-tion triggered by verb comprehension is modulated by processing of different depths,and individuals are more inclined to utilize sensorimotor simulation of verbs at higher levels of processing depth,non-automatically.

Systemic lupus erythematosus (SLE) is a multiple organ autoimmune disorder,including theliver,but the possible reason in impairment in the liver is still unclear.Our present study assessed alterations of transcription factor Foxp3+ regulatory T cells (Tregs) and several other immune molecules [programmed cell death 1 and its ligand (PD1 and PD-L1),and interleukin 10 (IL-10) and transform growth factor β (TGF-β)] in the liver and other major organs of lupus-prone BXSB mice by flow cytometry,real-time quantitative reverse trinscription PCR,and enzyme-linked immunosorbent assay.Results showed that both frequency and number of Foxp3+ Tregs were dramatically reduced in the thymus,spleen and kidney of the BXSB mice (P＜0.05),but those in the liver were kept in nearly normal range,when compared to negative control C57BL/6 mice.In comparison to control mice,the mRNA levels of Foxp3,PD1 and PD-L1 were significantly decreased in the kidneys of BXSB mice (P＜0.05),but there was no significant difference in the livers of the BXSB mice (P＞0.05).Protein levels of IL-10 and TGF-β in serum showed no significant difference between BXSB and C57BL/6 mice,but were significantly increased in the kidneys and livers of BXSB mice as compared with those in C57BL/6 mice (P＜0.05).These results suggest that reduced Foxp3+ Tregs are involved in the pathogenesis of SLE in BXSB mice,and relatively higher number of these cells in the livers than in the other target organs could constitute a protective mechanism against hepatic lesions in lupus-prone mice,which may provide insights into development of new therapeutic approaches in SLE patients.

ObjectiveThis?study?aims?to?investigate?the?color?stability?of?ceromer?with?different?thicknesses?and?different?types?of?resin?adhesive?materials?after?accelerated?aging?and?provide?references?for?clinical?application?and?selections.?Methods?Nine?groups?of?experimental?samples?were?used,?and?each?group?contained?five?samples.?We?made?joint?samples?with?ceromer?having?three?different?thicknesses?(1.00,?0.75,?0.50?mm)?combined?with?three?different?resin?adhesive?materials?(RelyX?Veneer,?RelyX?Unicem,?Filtek?Z350?Flow),?respectively.?All?samples?were?placed?into?Xenon?Lamp?Aging?Instrument?to?implement?accelerated?aging.?Spectrophotometer?was?used?to?measure?the?lightness?(L*),?red?green?color?value?(a*),?and?blue?yellow?color value (b*) of all samples before and after accelerated aging. The change of lightness (ΔL), red green color value (Δa), blue yellow color value (Δb), and color variation (ΔE) were also calculated. We investigated the influence of ceromer veneer thicknesses?and?resin?adhesive?material?types?on?color?variation?by?two-factor?analysis?of?variance.?Results???The?thickness?and?type factors showed significant influence on ΔE values, and exhibited interactions (P<0.05). The ΔE values of all experimen-tal?groups?were?lower?than?3.3.?After?the?accelerated?aging?process,?all?L*,?a*,?and?b*?values?of?the?experimental?groups?decreased?and the ΔL values were lower than 2.0.Conclusion???Cero-mer?veneer?thickness?and?resin?adhesive?material?types?could?affect?the?color?stability?of?ceromer?veneer?and?resin?adhe-sive?materials.?The?changes?in?lightness?and?color?in?cero-mer?veneer?and?resin?adhesive?materials?are?considered?clinically?acceptable?after?accelerated?aging.

Objective To investigate the color stability of computer aided design and computer aided manufacture (CAD/CAM) composite ceramic/resin cements after accelerated ageing. Methods Twelve groups (ten samples each group) were used as experimental groups, which were composed of CAD/CAM composite ceramic of three kinds of thickness (0.50, 0.75, 1.00 mm) (Lava Ultimate) associated with resin cements (Variolink N) of four colors (A1, A3, T, BL1). Another three groups of CAD/CAM composite ceramic/resin cements of three different kinds of thickness (0.50, 0.75, 1.00 mm) were used as control groups (ten samples each group). All samples were put into the xenon lamp ageing instrument to implement accelerated ageing. Spectrophotometers were used to measure the lightness (L*), red green color value (a*) and blue yellow color value (b*) of all samples before and after accelerated ageing process, and the changes of color variation (ΔE) was calculated. The effect of composite ceramic thickness and resin cement color on the changes of color variation (ΔE) before and after the ageing of CAD/CAM composite ceramic/resin cement and whether there was an interaction between them were tested by two-way ANOVA. Results Before and after accelerated ageing, the ΔE of CAD/CAM composite ceramic/resin cements were <3.3. Two?way ANOVA showed that the thickness of CAD/CAM composite ceramics had an effect on ΔE (F=27.025, P<0.001), and the color of resin cement also had an effect on ΔE (F=15.606, P<0.001), but there was no interaction between them (F=0.534, P=0.829). Conclusions The thickness of CAD/CAM composite ceramics and the color of resin cements could both affect the color stability of composite ceramic/resin cements combination. However, the resulted color change is within the clinically acceptable range.

Objective To investigate the color stability of ceromer veneers/resin cements after accelerated ageing,and to provide the reference for clinical application and choice.Methods Fifteen groups of ceromer veneers/resin cements samples,five samples in each group,were prepared as experimental groups.In the fifteen groups,ceromer veneers in three thickness (1.00,0.75,0.50 mm) and resin cements of five shades(A1,A3,B 0.5,WO,TR),were matched through permutation and combination.Three groups of ceromer veneers with different thickness (1.00,0.75,0.50 mm) were used as control groups.All samples were put into xenon lamp ageing instrument to accelerate ageing.Spectrophotometer were used to measure the lightness(L*),red green color(a*) and blue yellow color(b*) of samples before and after accelerated ageing process,and the change of lightness (△L),red green color (△a),blue yellow color (△b) and color variation(△E) were calctlated.We investigated the effect of thickness of ceromer veneer and color of resin cement on color variation by using analysis of variance.Results The thickness factor and color factor showed significant effect on △E values,and they have interaction (P ＜0.05).The △E values of all experimental groups were lower than 3.3.After accelerated ageing,all L* values of experimental groups decreased,and △L values were lower than 2.0.Conclusions The thickness of ceromer veneer and the color of resin cement could both affect the color stability of ceromer veneers/resin cements.The changes of lightness and color in ceromer veneers/resin cements were considered clinically acceptable after accelerated ageing.