Adult ; Female ; Humans ; Rheumatic Heart Disease ; therapy ; Treatment Failure

OBJECTIVETo investigate the clinical effects of enblock distal radius T-plate fixation in treating trailing edge fracture of tibial plateau medial condyle and posterior cruciate ligament (PCL) avulsion fracture.

METHODSFrom September 2008 to November 2011, 5 patients with trailing edge fracture of tibial plateau medial condyle and PCL avulsion fracture caused by knee joint hyperextension,were treated with surgery. There were 3 males and 2 females with an average age of 35 years old (25 to 42). Left knee injury was in 3 cases and right knee had in 2 cases; 2 cases caused by sports injury and 3 cases caused by road accident. All patients were undergone emergency treatment. Fractures were anatomically reduced and fixed with T-plate through poples approach. Complications were observed after operation. Bone healing and clinical effects were respectively evaluated by X-rays and HSS system.

RESULTSFive patients were followed up for 1 to 4 years with a mean of 2 years. All incisions obtained healing of I stage. All knee joints recovered well and were stable with inflexion more than 120 degrees, no complications such as knee joint pain, injuries of nerve and blood vessel, infection, internal fixation failure were found. The mean score of HSS system was 94.40 +/- 6.09 and all patients got excellent result.

CONCLUSIONFor the treatment of trailing edge fracture of tibial plateau medial condyle and PCL avulsion fracture caused by knee joint hyperextension, enblock distal radius T-plate fixation had advantages of good stability,higher success rate, and knee joint function can recover well.

Adult ; Female ; Follow-Up Studies ; Fracture Fixation, Internal ; Humans ; Male ; Posterior Cruciate Ligament ; diagnostic imaging ; injuries ; surgery ; Tibial Fractures ; diagnostic imaging ; surgery ; Tomography, X-Ray Computed ; Treatment Outcome

Objective To investigate the clinical value of 256-slice CT angiography (CTA) in diagnosing coronary artery fistula(CAF).Methods A total of 18 patients with CAF were analyzed retrospectively.The raw data were transferred to the work station.Image reconstruction techniques were employed, including multiplanar reconstruction (MPR),curved planar reconstruction (CPR),maximum intensity projection (MIP) and volume render (VR).Results Coronary artery angiography showed fistula affluxed to the pulmonary artery in 5 cases,affluxed to the coronary sinus in 5 cases,affluxed to the right atrium in 3 cases,affluxed to the left atrium in 3 cases, affluxed to the right ventricle in 2 cases.The blood flow from abnormal vessels to pulmonary arteries was demonstrated in 5 patients,and injection sign or hyper-density of contrast material in the main pulmonary artery was seen.The tortuous vascular networks on the surface of the main pulmonary artery trunk were seen in 2 cases.Formation of aneurysm was seen in 3 cases.Conclusion 256-slice CTA can precisely show the detailed anatomy variations and heomodynamic information of CAF, and directly display the abnormal vessels with multiple image reconstruction techniques.

Objective To study the effects of sample digestion conditions on measurement results of urinary iodine determined by As(Ⅲ)-Ce4+ catalytic spectrophotometry with ammonium persulfate digestion,and to promote the application of newly revised (the 2012 edition) national standard method for determination of urinary iodine.Methods According to the newly revised national standard method,various digestion conditions,such as ammonium persulfate concentration (0.8-1.3 mol/L,group interval 0.1),digestion instruments (heating block and drying oven) and standing time after digestion(0.5,1.0,2.0,4.0 and 22.0 h),were studied.The samples included 3 standard materials,which were GWB09108k,GWB09109f and GWB09110m containing iodine of (68.2 ± 9.0),(138.0 ± 10.0) and (221.0 ± 10.0) μg/L,and 5 urine samples with iodine concentration of 100-300 μg/L.Results Measurement results among the three groups of 0.9,1.0 and 1.1 mol/L ammonium persulfate digestion fluid showed no significant difference(P ＞ 0.05).The digestive effect showed no significant difference between heating block and drying oven (P ＞ 0.05) except one standard material in low concentration (GBW09108k).After digestion,samples were placed 0.5-22.0 h,the measurement results between groups showed no significant difference (P ＞ 0.05).Conclusions Appropriate concentrations of ammonium persulfate are from 0.9 mol/L to 1.1 mol/L.Heating block is recommended for the digestion,however,when absent,drying oven can be used alternatively.The standing times from 0.5 h to 22 h after digestion have not affected the measurement results.

BACKGROUND:In the treatment of tibial plateau fractures, because of the variety of fracture, the complexity of anatomical changes, X-ray films or three-dimensional CT scan limited by two-dimensional plane, increases the difficulty in preoperative plan and surgical treatment. The application of three-dimensional (3D) printing technology has attracted attention in the department of orthopedics. OBJECTIVE:To explore the auxiliary role of 3D printing technique in preoperative plan and treatment for tibial plateau fractures. METHODS:Thirty patients with tibial plateau comminuted fractures were enroled in this study and divided into two groups: experimental and control groups, with 15 patients in each group. In the experimental group, patients underwent 3D CT scan, which was stored in DICOM format, and processed by Mimics software. Data were converted into STL format, entered 3D printer, and a 1:1 entity size of the fracture model was made, in accordance with repair plan of 3D fracture model. Operation time and intraoperative blood loss were compared between the two groups. At 12 months after treatment, their outcomes were assessed using Rasmussen evaluation criteria. RESULTS AND CONCLUSION: The 3D printing fracture models of 1:1 ratio identified fracture type and made a repair program before surgery in the experimental group. Operation time and intraoperative blood loss were significantly less in the experimental group than in the control group (P < 0.05). After surgery, patients were folowed up for 12 to 18 months. The healing time was 3-5 months, averagely 4.3 months. At 12 months after treatment, the Rasmussen evaluation criteria results showed that the excelent and good rate was significantly higher in the experimental group than in the control group (P < 0.05). These results suggest that the fracture model of 3D can help to make the operation plan. The treatment of tibial plateau fractures is more precise, personalized and visual.

Objective To discuss the technical essentials of microsurgery using suboccipital muscle stratification for the treatment of complex vertebrobasilar aneurysms via far lateral approach.Methods The clinical data of 8 patients with vertebrobasilar aneurysm underwent suboccipital muscle stratification via far lateral approach at the Department of Neurosurgery,Xuanwu Hospital,Capital Medical University were analyzed retrospectively,including 5 patients with subarachnoid hemorrhage (Hunt-Hess grade Ⅱ 3 cases;grade Ⅲ 1 case;grade Ⅳ 1 case),and 3 with symptomatic dissecting aneurysm.Six patients underwent occipital artery-posterior inferior cerebellar artery and anterior inferior cerebellar artery bypass grafting,and aneurysm trapping,and the aneurysms of the other 2 cases were clipped directly in the operation.The modified Rankin scale (mRS) was used to evaluate the clinical efficacy.Results Postoperative digital subtraction angiography (DSA) revealed that all the bridge vessels were patent.The obtained length of occipital artery in the actual measurement of the operation was 12.5±1.1 cm.The distance between the anastomosis site and the skin incision in 6 cases was 50±6 mm.They were followed up for 4-21 months after procedure.The mRs score in 7 cases was 0-1.Two patients had new-onset hoarseness and recovered completely within 3 months after procedure.Another patient had postoperative cerebellar hemisphere dominant regional cerebral infarction and the mRs score was 4.None of them had poor wound healing,infection and cerebrospinal fluid leakage after procedure.Conclusion Suboccipital muscle stratification via far lateral approach can effectively obtain a longer occipital artery,reduce the occupation effect of muscle and depth of field.It is beneficial to expose lesions and operation of deep anastomosis.It is a more safe and practical technique in neurosurgery for the treatment of vertebrobasilar artery aneurysms.

Objective To evalutate the safty of hBMSCs transpalntation and to observe their migration and distribution in the brain of young macaca fascicularis. To establish a new technology platform and theoretical basis for the treatment of central nervous system diseases in children. Methods Labelled hBMSCs were transplanted into the striatum of young macaca fascicularis. Brain sections were examined to evalutate the inflammatory reaction and immunological rejection of local injection sites by HE observation and immunohistochemical staining. Migration and distribution of transplanted?hBMSCs was observed by real?time fluorescence quantitative PCR of male DNA and fluorescence microscope. Results The results showed that the direct intracerebral injection of hBMSCs did not cause systemic symptoms in animals. There is no inflammatory reaction and immunological rejection was detected, and degeneration and necrosis of neural cells and proliferation of glial cells were absent in the local injection sites. The transplanted hBMSCs survived, and migrated into the brain after 4 weeks transplantation. Its migration and distribution have certain regularity and were overlapping between transplant recipients. In addtion, hBMSCs tended to extend rostrally into the forebrain and showed preference of migrating toward the blood vessels and below the ependyma. Conculsions Intracerebral transplantation of hBMSCs is safe. And hBMSCs can survive and migrate into the brain.

BACKGROUND:The output of computed tomography (CT) is Digital Imaging and Communications in Medicine (DICOM), whereas the input of three-dimensional (3D) printing is an object Standard Template Library model represented by a triangular mesh. The process of data handing and forrmat conversion are keys to the combination of these two techniques. OBJECTIVE:To explore how to convert CT data into a stereoscopic 3D model efficiently. METHODS:The DICOM in Medicine format data of the patients with femoral fractures were edited and produced by Mimics. We made a 3D model by adjusting the parameters of the 3D printer slicing software, and discussed the significance of 3D model in medical field, especially orthopedics. RESULTS AND CONCLUSION:Mimics software is the bridge to connect two-dimensional CT scan images and 3D images, to create a 3D model by editing the data of DICOM which comes from the CT scanner, with a 3D printing technology. The 3D Model can help doctors for routine clinical diagnosis and treatment, to improve the communication between doctors and patients and the quality of clinical medical teaching. 3D printing also makes medicine more personalized, remote, minimally invasive, and promote the development of medicine to the direction of digital medicine.

Objective To evaluate the effects of different doses of lidocaine on suppressing fentanyl-induced cough and determine a safe suppressing dose.Methods Two hundred patients undergoing general anesthesia were randomized to four groups evenly.The following medications were given within ten seconds:normal saline 10ml (groupⅠ,control group),lidocaine 1 mg/kg (groupⅡ),lidoeaine 1.5 mg/kg(groupⅢ),lidocaine 2mg/kg (groupⅣ).Toxic symptoms of lidocaine were recorded within lmin after the administration of lidocaine,then fentanyl 3?g/ kg was given intravenously within 5 seconds.Cough incidence and cough grade were recorded within 2rain after the administration of fentanyl.Systolic blood pressure (SBP),diastolic blood pressure (DBP),heart rates (HR),and satu- ration of pulse oximeter(SpO2) were recorded during different time points of induction,all recorded data were anal- ysed by the statistical software,P value

Objective To summary and explore the indications,safety and effectiveness of no touch ostial cardioplegia delivery method during aortic valve replacement(AVR) for severe aortic insufficiency(AI),in order to provide guidance for clinical application.Methods Between September 2012 and February 2015,63 cases were randomly divided into two groups,in study group we used this technique in 31 patients with a mean age of(58.0 ± 15.0) years and a range of 31 to 74 years old.The degree of AI averaged (3.5 ± 0.5) according to a semiquantitative 5-grade scale[1].32 patients were enrolled in control group with a mean age of(60.4 ± 9.4) years and a range of 22 to 73 years old.The degree of AI averaged (3.6 ± 0.5).The abnormal aortic cusps were sutured though the aortic incision,which would be closed temporarily.Blood cardioplegia was infused repeatedly into the coronary osita through the closed aortic incision during the remainder of the procedure except AVR,when the closed aortic incision was reopened.Results In the study group,spontaneous resumption of nodal and normal sinus rhythm shortly after the removal of aortic cross-clamp was achieved in all patients,no hearts had to be electrically defibrillated and electrocardiogram showed no obvious S-T segment elevation.The time from cross-clamp removal to sinus rhythm was(12.3 ± 7.7) minutes in the study group,versus (18.6 ± 8.2) minutes in the control group(P =0.037).No operative mortality occurred in both groups.There was a significant increase in left ventricular ejection fraction[from(0.54 ± 0.09) preoperatively to(0.62 ± 0.06) postoperatively] (P =0.005) in patients of the study group,which was not seen in patients of the control group.Conclusion Preliminary results have shown that the no touch ostial cardioplegia delivery method is a feasible method for cardioplegia infusion during aortic valve replacement in patients with severe AI.