ObjectiveTo investigate the effects and underlying mechanisms of Shenqi Wenfei prescription （SQWF） on chronic obstructive pulmonary disease （COPD）. MethodsA rat model of COPD with lung Qi deficiency was established using lipopolysaccharide （LPS） combined with cigarette smoke. Forty-eight SD rats were randomly divided into a blank group， a model group， low-， medium-， and high-dose SQWF groups （2.835， 5.67， 11.34 g·kg^-1）， and a Yupingfeng group （1.35 g·kg^-1）. Drug administration began on day 29 after modeling and continued for 2 weeks. The general condition of the rats was observed， and the lung function in each group was assessed. Hematoxylin-eosin （HE） staining was used to observe pathological changes in lung tissue. The proportion of inflammatory cells in bronchoalveolar lavage fluid （BALF） was measured. Apoptosis in lung tissue was examined by terminal deoxynucleotidyl transferase-mediated dUTP nick end-labeling （TUNEL） staining. The release level of lactate dehydrogenase （LDH） in BALF was detected by a microplate assay. Reactive oxygen species （ROS） levels in lung tissue were detected using fluorescent probes. The levels of malondialdehyde （MDA）， total superoxide dismutase （SOD）， and reduced glutathione （GSH） in BALF were measured by biochemical methods. Ultrastructural changes in lung cells were observed via transmission electron microscopy. Double immunofluorescence staining was performed to detect the expression of thioredoxin-interacting protein （TXNIP） and nucleotide-binding oligomerization domain-like receptor protein 3 （NLRP3） in lung tissue. Western blot analysis was used to detect the protein expression of TXNIP， NLRP3， apoptosis-associated speck-like protein containing a CARD （ASC）， cysteinyl aspartate-specific protease-1 （Caspase-1）， Caspase-1 p20， gasdermin D （GSDMD）， GSDMD N-terminal active fragment （GSDMD-N）， interleukin-1β （IL-1β）， and IL-18 in lung tissue. Serum IL-1β and IL-18 levels were measured by ELISA. ResultsCompared with the blank group， the model group showed lassitude， fatigue， tachypnea， and audible phlegm sounds， and lung function significantly declined （P0.01）. Pulmonary emphysema and inflammatory cell infiltration were obvious. The level of inflammatory cells in BALF increased significantly （P0.05）. The number of TUNEL-positive cells increased （P0.01）. Levels of LDH， ROS， and MDA in BALF increased significantly （P0.01）， while GSH and SOD activities decreased significantly （P0.01）. Lung tissue cells showed irregular morphology， swollen mitochondria， disrupted cell membranes， and abundant vesicles， i.e.， pyroptotic bodies. Protein levels of TXNIP， NLRP3， ASC， Caspase-1， Caspase-1 p20， GSDMD， GSDMD-N， IL-1β， and IL-18 in lung tissue were significantly elevated （P0.01）， and serum IL-1β and IL-18 levels also increased significantly （P0.01）. Compared with the model group， each medication group showed alleviation of qi deficiency symptoms and improved lung function （P0.01）. Pulmonary emphysema and inflammatory cell infiltration were reduced. Inflammatory cell levels decreased （P0.05）. The number of TUNEL-positive cells decreased significantly （P0.01）. Levels of LDH， ROS， and MDA decreased significantly （P0.05）， while GSH and SOD activities significantly increased （P0.01）. Morphological and structural damage in lung tissue was improved to varying degrees. Protein levels of TXNIP， NLRP3， ASC， Caspase-1， Caspase-1 p20， GSDMD， GSDMD-N， IL-1β， and IL-18 in lung tissue significantly decreased （P0.01）， and serum IL-1β and IL-18 levels also decreased significantly （P0.05）. ConclusionSQWF can improve lung function and alleviate inflammatory responses in COPD rats. Its mechanism may be related to regulating the ROS/TXNIP/NLRP3 pathway and inhibiting pyroptosis.

ObjectiveTo investigate the effects and underlying mechanisms of Shenqi Wenfei prescription （SQWF） on chronic obstructive pulmonary disease （COPD）. MethodsA rat model of COPD with lung Qi deficiency was established using lipopolysaccharide （LPS） combined with cigarette smoke. Forty-eight SD rats were randomly divided into a blank group， a model group， low-， medium-， and high-dose SQWF groups （2.835， 5.67， 11.34 g·kg^-1）， and a Yupingfeng group （1.35 g·kg^-1）. Drug administration began on day 29 after modeling and continued for 2 weeks. The general condition of the rats was observed， and the lung function in each group was assessed. Hematoxylin-eosin （HE） staining was used to observe pathological changes in lung tissue. The proportion of inflammatory cells in bronchoalveolar lavage fluid （BALF） was measured. Apoptosis in lung tissue was examined by terminal deoxynucleotidyl transferase-mediated dUTP nick end-labeling （TUNEL） staining. The release level of lactate dehydrogenase （LDH） in BALF was detected by a microplate assay. Reactive oxygen species （ROS） levels in lung tissue were detected using fluorescent probes. The levels of malondialdehyde （MDA）， total superoxide dismutase （SOD）， and reduced glutathione （GSH） in BALF were measured by biochemical methods. Ultrastructural changes in lung cells were observed via transmission electron microscopy. Double immunofluorescence staining was performed to detect the expression of thioredoxin-interacting protein （TXNIP） and nucleotide-binding oligomerization domain-like receptor protein 3 （NLRP3） in lung tissue. Western blot analysis was used to detect the protein expression of TXNIP， NLRP3， apoptosis-associated speck-like protein containing a CARD （ASC）， cysteinyl aspartate-specific protease-1 （Caspase-1）， Caspase-1 p20， gasdermin D （GSDMD）， GSDMD N-terminal active fragment （GSDMD-N）， interleukin-1β （IL-1β）， and IL-18 in lung tissue. Serum IL-1β and IL-18 levels were measured by ELISA. ResultsCompared with the blank group， the model group showed lassitude， fatigue， tachypnea， and audible phlegm sounds， and lung function significantly declined （P0.01）. Pulmonary emphysema and inflammatory cell infiltration were obvious. The level of inflammatory cells in BALF increased significantly （P0.05）. The number of TUNEL-positive cells increased （P0.01）. Levels of LDH， ROS， and MDA in BALF increased significantly （P0.01）， while GSH and SOD activities decreased significantly （P0.01）. Lung tissue cells showed irregular morphology， swollen mitochondria， disrupted cell membranes， and abundant vesicles， i.e.， pyroptotic bodies. Protein levels of TXNIP， NLRP3， ASC， Caspase-1， Caspase-1 p20， GSDMD， GSDMD-N， IL-1β， and IL-18 in lung tissue were significantly elevated （P0.01）， and serum IL-1β and IL-18 levels also increased significantly （P0.01）. Compared with the model group， each medication group showed alleviation of qi deficiency symptoms and improved lung function （P0.01）. Pulmonary emphysema and inflammatory cell infiltration were reduced. Inflammatory cell levels decreased （P0.05）. The number of TUNEL-positive cells decreased significantly （P0.01）. Levels of LDH， ROS， and MDA decreased significantly （P0.05）， while GSH and SOD activities significantly increased （P0.01）. Morphological and structural damage in lung tissue was improved to varying degrees. Protein levels of TXNIP， NLRP3， ASC， Caspase-1， Caspase-1 p20， GSDMD， GSDMD-N， IL-1β， and IL-18 in lung tissue significantly decreased （P0.01）， and serum IL-1β and IL-18 levels also decreased significantly （P0.05）. ConclusionSQWF can improve lung function and alleviate inflammatory responses in COPD rats. Its mechanism may be related to regulating the ROS/TXNIP/NLRP3 pathway and inhibiting pyroptosis.

Endodontic microsurgery (EMS) is an oral surgical procedure that utilizes the magnification and illumination provided by a microscope. Fine instruments are used to remove periapical diseased tissues, resect the root apex, and tightly seal the root canal system, aiming to promote the healing of periapical tissues and retain the affected tooth whenever possible. Precise localization and resection of the root apex have always been challenging in EMS. The application of digital technology in EMS can address many issues in traditional endodontic microsurgery. Digital technology offers advantages such as optimizing surgical planning, providing precise positioning guidance, and enhancing operational accuracy. Currently, the commonly used digital technologies in EMS include static and dynamic navigation technologies and oral surgical robots. Static navigation technology enhances surgical predictability through precise preoperative planning and guided fabrication, yet is constrained by its inability to adjust during surgery. Dynamic navigation technology excels in real-time tracking and intraoperative flexibility but demands high hand-eye coordination from surgeons and may be hindered by bulky handheld devices. Oral surgical robots reduce hand tremors and human error in surgery with their high precision, stability, and ability to adjust in real time, but their clinical applicability is limited and their cost is high. In clinical practice, tailored combinations of these technologies can be applied based on case complexity. For simple cases with well-defined anatomy, static navigation alone may suffice. For complex anatomical cases, static navigation can provide initial planning, supplemented by dynamic navigation for real-time guidance or robotic systems for high-precision execution. This paper discusses the workflow, clinical application status and advantages and limitations of these three digital technologies in EMS. The continuous development of digital technology is expected to simplify the operation process, improve the navigation accuracy, and reduce the operation cost. It is believed that with continuous improvement and optimization, these technologies will effectively break through the current bottleneck of the cost of equipment, operation complexity, and accuracy enhancement. These technologies are also expected to further expand the application boundaries, providing more minimally invasive, precise, and time-saving personalized treatment solutions for endodontic diseases.

ObjectiveTo characterize the quality differences among different germplasm and introduced varieties of Bupleurum scorzonerifolium roots（BSR）， and explore the underlying molecular mechanisms， providing a basis for high-quality production and quality control. MethodsWild BSR from Yulin（YLW） served as the quality reference， we conducted comparative analysis among YLW， locally domesticated wild germplasm in Yulin（YLC3）， Daqing germplasm introduced and cultivated in Yulin（YLDQC3）， and locally cultivated germplasm in Daqing（DQC3）. A combination of traditional pharmacognostic methods and modern multi-omics analyses was employed， including macroscopic traits（appearance， odor）， microscopic features（proportions of cork， phloem， xylem）， cell wall component contents（hemicellulose， cellulose， lignin）， carbohydrate contents（starch， water-soluble polysaccharides）， marker compound contents（ethanol-soluble extracts， total saponins， liposoluble extracts， and saikosaponins A， B₂， C， D）， metabolomics， and transcriptomics， in order to systematically characterize quality differences and investigate molecular mechanisms among these samples. ResultsMacroscopically， Yulin-produced BSR（YLW， YLC3， YLDQC3） exhibited significantly greater weight， length， and upper and middle diameters than Daqing-produced BSR（DQC3）. Odor-wise， YLW and YLC3 had a a fragrance taste， YLDQC3 had a rancid oil odor， and DQC3 had a sweet and fragrant taste. Microscopically， Yulin germplasm（YLW， YLC3） and Daqing germplasm（YLDQC3， DQC3） shared similar structural features， respectively. However， Yulin germplasm showed significantly higher proportions of cork and phloem， as well as stronger xylem vessel staining intensity compared to Daqing germplasm. Regarding various component contents， Yulin germplasm contained significantly higher levels of ethanol-soluble extracts， total saponins， and saikosaponins A， B₂， C， D， while Daqing germplasm had significantly higher levels of hemicellulose， starch， and liposoluble extracts. After introduction to Yulin， the Daqing germplasm（YLDQC3） showed increased starch， water-soluble polysaccharides and liposoluble extracts contents， decreased cell wall component content， but no significant difference in other component contents. Metabolomics revealed that saponins and terpenes accumulated significantly in Yulin germplasm， while alcohols and aldehydes accumulated predominantly in Daqing germplasm. Transcriptomics indicated similar gene expression patterns within the same germplasm but specificity between different germplasms. Integrative metabolomic-transcriptomic analysis identified 145 potential key genes associated with the saikosaponin biosynthesis pathway， including one acetyl-coenzyme A（CoA） acetyltransferase gene（ACAT）， one 3-hydroxy-3-methylglutaryl-coenzyme A synthase gene（HMGS）， two hydroxymethylglutaryl-CoA（HMG-CoA） reductase genes（HMG）， one phosphomevalonate kinase gene（PMK）， one 1-deoxy-D-xylose-5-phosphate synthase gene（CLA）， one hydroxymethylbuten-1-aldol synthase gene（HDR）， two farnesyl pyrophosphate synthase genes（FPPS）， one squalene synthase gene（SQS）， one β-amyrin synthase gene（BAS）， 102 cytochrome P450（CYP450） gene family members， and 32 uridine diphosphate-glucuronosyltransferase（UGT） gene family members. ConclusionAmong the three cultivated types， YLC3 most closely resembles YLW in appearance， microscopic features， contents of major bioactive constituents， metabolomic and transcriptomic profiles. Yulin germplasm exhibits superior saponin synthesis capability compared to Daqing germplasm， and Yulin region is more suitable for the growth of B. scorzonerifolium. Based on these findings， it is recommended that artificial cultivation in northern Shaanxi and similar regions utilize the local Yulin germplasm source cultivated for at least three years.

ObjectiveBased on the traditional quality evaluation methods summarized in previous dynasties， this paper systematically contrasted the quality differences between wild Polygalae Radix（WPR） and cultivated Polygalae Radix（CPR） from the aspects of character， microscope and chemical composition by modern scientific and technological means， providing a basis for high-quality production and quality control. MethodsCPR and local WPR in Yulin city， Shaanxi province from 1 to 6 years were collected， and a systematic comparative analysis was conducted using traditional pharmacognosy research methods combined with modern multi-omics analysis techniques， including character traits（length， weight， diameter）， cross-sectional microscopic features（proportions of cork， phloem， xylem， etc）， cell wall component content（hemicellulose， cellulose， lignin）， extracts content（water-soluble extract and alcohol-soluble extract）， carbohydrate content（starch， water-soluble polysaccharides）， contents of total flavonoids， total saponins and specific marker compounds（3，6′-disinapoyl sucrose， polygalaxanthone Ⅲ， tenuifoliside A， tenuifoliside C， sibiricose A₅ and A₆） and other indexes. Ultra-high performance liquid chromatography-quadrupole-time-of-flight mass spectrometry（UPLC-Q-TOF-MS） was employed to conduct comparative analysis of secondary metabolites in WPR and CPR， and multivariate statistical analysis such as principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） were combined to screen the key differential components of them. ResultsIn terms of appearance， there were significant differences between WPR and CPR. The characteristics of WPR conformed to the "thick wrinkles on the epidermis" recorded in ancient books， featuring a wrinkled surface and grayish-brown appearance. However， CPR had a finer texture and a yellowish white appearance， with weight， length， and diameter increasing with longer cultivation periods. In terms of microscopy， WPR exhibited a thick cork layer with fissures in the phloem， whereas CPR had a thinner cork layer with uniformly arranged cork cells. Younger PR specimens showed numerous phloem fissures in cross-sections， while older specimens display progressively denser arrangements of phloem parenchyma cells. In terms of the contents of various major components， the contents of water-soluble extract， starch and total saponins in WPR were inversely proportional to the root diameter， while the contents of water-soluble extract， water-soluble polysaccharides and total saponins in CPR decreased with the increase of planting years. The content of xanthones in WPR was significantly higher than that of CPR， while the contents of other major components showed no significant change pattern. Among the six indicator components， the average content of sibiricose A₅ in WPR was significantly higher than that of CPR， followed by slightly higher content of tenuifoliside A. In CPR， the relative content of 3，6′-disinapoyl sucrose and tenuifoliside A was the highest. The former showed an increase in volatility with increasing cultivation years， while the latter showed a decrease in volatility. The results of differential compound analysis based on UPLC-Q-TOF-MS showed that there were significant differences in metabolites between WPR and CPR samples. Among them， the seven compounds with the largest differences among WPR samples of different thicknesses were polygalasaponins， and for CPR with different planting years， the main differential compounds were oligosaccharide esters. ConclusionThere are differences between WPR and CPR in character， microscopic structure and chemical composition， and some components are inversely proportional with the increase of diameter and cultivation duration due to the distribution characteristics. However， the longer the cultivation years of PR， the closer it is to the "thick wrinkles on the epidermis" of WPR， which has been respected by generations. It is suggested that this traditional character combined with modern component contents should be used as the index of artificial cultivation and quality control of PR.

ObjectiveBased on traditional quality evaluation of Gardeniae Fructus（GF） recorded in historical materia medica， this study systematically compared the quality differences between wild and cultivated GF from morphological characteristics， microscopic features， and contents of primary and secondary metabolites. MethodsVernier calipers and analytical balances were used to measure the length， diameter and individual fruit weight of wild and cultivated GF， and the aspect ratio was calculated. A colorimeter was used to determine the chromaticity value of wild and cultivated GF， and the paraffin sections of them were prepared by safranin-fast green staining and examined under an optical microscope to observe their microstructure. Subsequently， the contents of water-soluble and alcohol-soluble extracts of wild and cultivated GF were detected by hot immersion method under the general rule 2201 in volume Ⅳ of the 2020 edition of the Pharmacopoeia of the People's Republic of China， the starch content was measured by anthrone colorimetric method， the content of total polysaccharides was determined by phenol-sulfuric acid colorimetric method， the sucrose content was determined by high performance liquid chromatography coupled with evaporative light scattering detection（HPLC-ELSD）， and the contents of representative components in them were measured by ultra-performance liquid chromatography（UPLC）. Finally， correlation analysis was conducted between quality traits and phenotypic traits， combined with multivariate statistical analysis methods such as principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， key differential components between wild and cultivated GF were screened. ResultsIn terms of traits， the wild GF fruits were smaller， exhibiting reddish yellow or brownish red hues with significant variation between batches. While the cultivated GF fruits are larger， displaying deeper orange-red or brownish red. The diameter and individual fruit weight of cultivated GF were significantly greater than those of wild GF， while the blue-yellow value（b^*） of wild GF was significantly higher than that of cultivated GF. In the microstructure， the mesocarp of wild GF contained numerous scattered calcium oxalate cluster crystals， while the endocarp contained stone cell class round， polygonal or tangential prolongation， undeveloped seeds were visible within the fruit. In contrast， the mesocarp of cultivated GF contained few calcium oxalate cluster crystals， or some batches exhibited extremely numerous cluster crystals. The stone cells in the endocarp were predominantly round-like， with the innermost layer arranged in a grid pattern. Seeds were basically mature， and only a few immature seeds existed in some batches. Regarding primary metabolite content， wild GF exhibited significantly higher total polysaccharide level than cultivated GF（P<0.01）. In category-specific component content， wild GF exhibited significantly higher levels of total flavonoids and total polyphenols compared to cultivated GF（P<0.01）. Analysis of 12 secondary metabolites revealed that wild GF exhibited significantly higher levels of Shanzhiside， deacetyl asperulosidic acid methyl ester， gardenoside and chlorogenic acid compared to cultivated GF（P<0.01）. Conversely， the contents of genipin 1-gentiobioside， geniposide and genipin were significantly lower in wild GF（P<0.01）. ConclusionThere are significant differences between wild and cultivated GF in terms of traits， microstructure， and contents of primary and secondary metabolites. At present， the quality evaluation system of cultivated GF remains incomplete， and this study provides a reference for guiding the production of high-quality GF medicinal materials.

ObjectiveThis paper aims to clarify the material basis of Gualou Niubangtang and establish a quantitative analysis method for its main constituents， providing a reference for the overall quality control of this preparation. MethodsThe constituents in the formula were systematically characterized based on ultra-performance liquid chromatography-quadrupole time-of-flight tandem mass spectrometry （UPLC-Q-TOF-MS/MS）. Identification was performed by matching with the UNIFI 9.6 software and utilizing database platforms such as PubChem， ChemicalBook， and ChemSpider， combined with relevant literature reports. A quantitative analysis method for the seven main constituents in Gualou Niubangtang was established by using high performance liquid chromatography （HPLC）. ResultsUPLC-Q-TOF-MS/MS analysis identified 155 constituents， including 69 flavonoids， 36 terpenoids， 23 phenylpropanoids， 8 phenylethanoid glycosides， and 19 other types of constituents. In the established quantitative analysis method， the seven main constituents showed good linearity within their respective linear ranges. The precision， repeatability， stability， and spike recovery all met the required standards. The results showed that the content ranges of geniposide， liquiritin， hesperidin， arctiin， baicalin， oroxylin A-7-O-β-D-glucuronide， and wogonoside in 15 batches of Gualou Niubangtang were 13.67-21.25， 1.20-7.64， 5.45-7.45， 22.97-33.51， 29.95-39.07， 2.58-4.80， and 6.56-9.31 mg·g^-1， respectively. ConclusionThis study successfully characterizes and attributes multi-category constituents in Gualou Niubangtang， clarifying that its material basis is primarily composed of flavonoids， terpenoids， phenylethanoid glycosides， and phenylpropanoids. Furthermore， it enables the quantification of seven constituents within the formula. This work lays a foundation for research on the quality control， action mechanism， and clinical application of this formula.

This article systematically reviews and verifies the medicinal materials of Dioscoreae Hypoglaucae Rhizoma（DHR）， Dioscoreae Spongiosae Rhizoma（DSR）， Smilacis Chinae Rhizoma（SCR） and Smilacis Glabrae Rhizoma（SGR） from the aspects of name， origin， producing area， quality， harvesting， processing and efficacy by consulting historical literature， in order to provide reference for the development and utilization of famous classical formulas containing the four medicinal materials. DHR， DSR， SCR and SGR have a long history of application as medicinal materials. However， due to their similar growth environment and medicinal properties， as well as their functions of promoting dampness， dispelling wind and removing numbness， there have been instances of homonymous foreign objects and homonymous synonyms throughout history， resulting in confusion of the origin. Therefore， it is necessary to conduct comparative analysis and systematic research for clarifying the historical development and changes of the four， in order to provide a basis for safe and effective medication. According to research， Bixie was first recorded in Shennong Bencaojing and has been historically known as Baizhi， Chijie， Zhumu， and other aliases. From ancient times to the mid-20th century， there has always been a situation where the rhizomes of Dioscorea plants and Smilax plants， and even the rhizomes of Heterosmilax plants， were mixed together to be used as medicinal herbs for Bixie. However， since the Tang dynasty， it has been clearly advocated that the rhizomes of Dioscorea plants have excellent quality and have been the mainstream throughout history. The 2020 edition of Chinese Pharmacopoeia categorized it into two types of medicinal herbs（DHR and DSR）. Among them， the origin of DHR is the dry rhizomes of Dioscorea hypoglauca， and the origins of DSR are the dry rhizomes of D. spongiosa and D. futschauensis. In ancient times， due to different types， the corresponding production areas of DHR and DSR were also different. Nowadays， They are mainly produced in the southern region of the Yangtze River. Since the Tang dynasty， the quality of Bixie has been characterized by its white color and soft nature. In modern times， it has been summarized that those with white color， large and thin pieces， powdery texture， tough and elastic texture， and neat and unbreakable are the best. The harvesting times of DHR and DSR are in spring or autumn， with the best quality harvested in autumn. The mainstream processing methods of them are slicing and then using the raw products or wine-processed products. SCR was first recorded in Mingyi Bielu and has been known as Jinganggen， Tielingjiao， Tieshuazi， and other aliases in history. The mainstream source is the dry rhizomes of Smilax china in the past dynasties， with the best quality being those that are tough and rich in powder. The harvesting time is from the late autumn to the following spring， and the main processing method throughout history has been slicing for raw use. SGR was first recorded under the item of Yuyuliang in Variorum of Shennong's Classic of Materia Medica. It was listed as an independent medicinal material from Bencao Gangmu. In history， there were such aliases as Cao Yuyuliang， Lengfantuan， Xianyiliang， Tubixie， etc. The main source of the past dynasties was dry rhizomes of S. glabra. In history， there have also been instances of multiple plants belonging to the same genus， and even cases of mixing the rhizomes of plants in the genus Heterosmilax. It is mainly produced in Guangdong， Hunan， Hubei， Zhejiang， Sichuan， Anhui and other regions， its quality has been summarized as large in size， powdery in texture， with few veins， and light brown in cross-section since modern times. The harvesting time is in spring or autumn， and the main processing method throughout history has been slicing for raw use. DHR， DSR， SCR and SGR all have the effects of promoting dampness， dispelling wind， relieving rheumatism and detoxifying. However， their detoxification abilities are ranked as follows：SGR>SCR>Bixie（DHR and DSR）. Especially for the treatment of limb spasms， arthralgia and myalgia， scrofula， and scabies caused by syphilis and mercury poisoning， SGR has a unique effect. Based on the research results， DHR is recommended to develop the famous classical formulas containing Bixie as the first choice for medicinal herbs. It should be harvested in autumn， sliced thinly while fresh， and processed according to the requirements of the famous classical formulas， without any requirements for raw use. Selecting the rhizomes of S. china， harvested in late autumn， and thinly sliced while fresh. If there are no special processing requirements in the formulas， use it raw. Selecting the rhizomes of S. glabra， it is harvested in autumn and thinly sliced while fresh. If there are no special processing requirements in the formulas， raw products can be used.

[Objective] To study the molecular biological mechanism for a case of ABO blood group B subtype, and perform three-dimensional modeling of the mutant enzyme. [Methods] The ABO phenotype was identified by the tube method and microcolumn gel method; the ABO gene of the proband was detected by sequence-specific primer polymerase chain reaction (PCR-SSP), and the exon 6 and 7 of the ABO gene were sequenced and analyzed. Homologous modeling of Bw.03 glycosyltransferase (GT) was carried out by Modeller and analyzed by PyMOL2.5.0 software. [Results] The weakening B antigen was detected in the proband sample by forward typing, and anti-B antibody was detected by reverse typing. PCR-SSP detection showed B, O gene, and the sequencing results showed c.721 C>T mutation in exon 7 of the B gene, resulting in p. Arg 241 Trp. Compared with the wild type, the structure of Bw.03GT was partially changed, and the intermolecular force analysis showed that the original three hydrogen bonds at 241 position disappeared. [Conclusion] Blood group molecular biology examination is helpful for the accurate identification of ambiguous blood group. Homologous modeling more intuitively shows the key site for the weakening of Bw.03 GT activity. The intermolecular force analysis can explain the root cause of enzyme activity weakening.

ObjectiveTo analyze the advance of robot-assisted therapy in upper limb functions of patients with stroke. MethodsA search was conducted in the Web of Science Core Collection for literature on the application of robot-assisted therapy in upper limb functions of patients with stroke, from inception to November, 2024. Citespace 6.4.R1 was used to perform bibliometric analysis, including countries of origin, authors, institutions, subject areas, keywords and citation relationships, and knowledge mapping techniques were also utilized. ResultsA total of 198 publications in English were included, showing an upward trend in publication volume. China, Italy and the United States ranked highest in publication counts, with the University Campus Bio-Medico of Rome, Italy contributing the most. Among authors, Giulio Rosati had the highest number of publications. The top three co-occurring keywords were motor recovery, activities of daily living and neuroplasticity. Keywords with the highest citation bursts included rehabilitation robotics, virtual reality and upper limb rehabilitation. Keyword clustering identified four primary research directions: improving upper limb motor function, enhancing sensory function, increasing activities of daily living and promoting brain neuroplasticity. The research spanned several disciplines, including basic medicine, clinical medicine, biomedical engineering, rehabilitation medicine and therapy, and control science and engineering. ConclusionRobot-assisted therapy for the upper limb function in stroke patients constitutes an innovative rehabilitation approach. Current research hotspots focus on both the design of robot-assisted therapy and their effectiveness. Findings suggest that robot-assisted occupational therapy can effectively improve upper limb function, facilitate neuroplasticity, enhance activities of daily living reliant on the upper limbs, and boost patients motivation and confidence in rehabilitation. Future research should emphasize integrating robot-assisted therapy with emerging technologies such as artificial intelligence and virtual reality, to explore its potential in precise rehabilitation strategies and the development of personalized rehabilitation programs.