Objective To repair segmental mandibular defects with autogenous bone marrow stromal cells(BMSCs)and?-triealcium phosphate.Methods Isolated BMSCs were in vitro expand- ed.A 3 cm-long segmental mandibular defect was created at right mandible in 12 canines,of which de- fects in six canines were repaired with BMSCs and?-tricalcium phosphate(?-TCP)and that in other six cases repaired with?-TCP,which was used as control.The engineered bone was evaluated by X-ray, CT,DXA,gross and histological examination,immunohistochemistry and biomechanical test 4,12,26,32 weeks after operation respectively.Results In induced BMSCs,histochemistry showed AKP activity. Oral X-ray showed obvious callus formation 4-26 weeks after operation in experimental group but minimal bone formation in control group.At 32 weeks after operation,gross observation,X-ray and CT demonstra- ted well bony-union in experimental group but bony-nonunion in control group.DXA indicated that the bone density of experimental group was significantly higher than that of control group.Biomechanical test revealed no statistical difference upon mechanical strength of mandibula between experimental group and normal group.Conclusions Canine segmental mandibular defects can be well repaired with the tissue- engineered bone generated by autogenous osteogenic BMSCs and?-TCP scaffold.

INTRODUCTIONThis prospective observational case series aimed to determine whether the lateral decubitus position, which is commonly adopted during sleep, has an effect on intraocular pressure (IOP) in normal controls.

METHODSPatients without glaucoma were recruited from those visiting outpatient clinics for non-glaucomatous conditions. The left eye of each patient was included. IOP was first measured using Tono-Pen® XL applanation tonometer in the supine position, following which a second measurement was immediately obtained for the left lateral head position. Measurements were obtained with the patient lying on one soft and one hard pillow for each position, and patients remained awake during these measurements. One tonometry reading was obtained for each position. Readings were recorded only when the average of four independent readings produced a statistical confidence index of 5%. Results were analysed using the paired Student's t-test for comparison of the means.

RESULTSIOP in the left lateral decubitus position (17.48 ± 3.18 mmHg) was significantly higher than in the supine position (14.48 ± 3.09 mmHg) when using soft pillows (p < 0.001). When hard pillows were used, IOP in the left lateral decubitus position also exceeded that measured in the supine position (16.65 ± 3.54 mmHg vs. 13.65 ± 3.58 mmHg; p < 0.001). There was no statistically significant difference in the IOPs measured for the same position when different kinds of pillows were used.

CONCLUSIONThe lateral decubitus position adopted during sleep is associated with changes in IOP in healthy volunteers.

Adult ; Aged ; Female ; Glaucoma ; Humans ; Intraocular Pressure ; Male ; Middle Aged ; Posture ; Prospective Studies ; Sleep ; Tonometry, Ocular ; Wakefulness

Objectives: Understanding the lingual nerve’s precise location is crucial to prevent iatrogenic injury. This systematic review seeks to determine the lingual nerve’s most probable topographical location in the posterior mandible. Materials and Methods: Two electronic databases were searched, identifying studies reporting the lingual nerve’s position in the posterior mandible.Anatomical data in the vertical and horizontal dimensions at the retromolar and molar regions were collected for meta-analyses. Results: Of the 2,700 unique records identified, 18 studies were included in this review. In the vertical plane, 8.8% (95% confidence interval [CI], 1.0%-21.7%) and 6.3% (95% CI, 1.9%-12.5%) of the lingual nerves coursed above the alveolar crest at the retromolar and third molar regions. The mean vertical distance between the nerve and the alveolar crest ranged from 12.10 to 4.32 mm at the first to third molar regions. In the horizontal plane, 19.9% (95% CI, 0.0%-62.7%) and 35.2% (95% CI, 13.0%-61.1%) of the lingual nerves were in contact with the lingual plate at the retromolar and third molar regions. Conclusion This systematic review mapped out the anatomical location of the lingual nerve in the posterior mandible, highlighting regions that warrant additional caution during surgeries to avoid iatrogenic lingual nerve injuries.

Background/Aims: Proximal colorectal cancers (CRCs) account for up to half of CRCs. Sessile serrated lesions (SSLs) are precursors to CRC. Proximal location and presence of dysplasia in SSLs predict higher risks of progression to cancer. The prevalence of dysplasia in proximal SSLs (pSSLs) and clinical characteristics of dysplastic pSSLs are not well studied. Methods: Endoscopically resected colonic polyps at our center between January 2016 and December 2017 were screened for pSSLs. Data of patients with at least one pSSL were retrieved and clinicopathological features of pSSLs were analysed. pSSLs with and without dysplasia were compared for associations. Results: Ninety pSSLs were identified, 45 of which had dysplasia giving a prevalence of 50.0%. Older age (65.9 years vs. 60.1 years, p=0.034) was associated with the presence of dysplasia. Twelve pSSLs were 10 mm or larger. After adjusting for age, pSSLs ≥10 mm had an adjusted odds ratio of 5.98 (95% confidence interval, 1.21–29.6) of having dysplasia compared with smaller pSSLs. Conclusions In our cohort of pSSLs, the prevalence of dysplasia is high at 50.0% and is associated with lesion size ≥10 mm. Endoscopic resection for all proximal serrated lesions should be en-bloc to facilitate accurate histopathological examination for dysplasia as its presence warrants shorter surveillance intervals.

Background/Aims: Proximal colorectal cancers (CRCs) account for up to half of CRCs. Sessile serrated lesions (SSLs) are precursors to CRC. Proximal location and presence of dysplasia in SSLs predict higher risks of progression to cancer. The prevalence of dysplasia in proximal SSLs (pSSLs) and clinical characteristics of dysplastic pSSLs are not well studied. Methods: Endoscopically resected colonic polyps at our center between January 2016 and December 2017 were screened for pSSLs. Data of patients with at least one pSSL were retrieved and clinicopathological features of pSSLs were analysed. pSSLs with and without dysplasia were compared for associations. Results: Ninety pSSLs were identified, 45 of which had dysplasia giving a prevalence of 50.0%. Older age (65.9 years vs. 60.1 years, p=0.034) was associated with the presence of dysplasia. Twelve pSSLs were 10 mm or larger. After adjusting for age, pSSLs ≥10 mm had an adjusted odds ratio of 5.98 (95% confidence interval, 1.21–29.6) of having dysplasia compared with smaller pSSLs. Conclusions In our cohort of pSSLs, the prevalence of dysplasia is high at 50.0% and is associated with lesion size ≥10 mm. Endoscopic resection for all proximal serrated lesions should be en-bloc to facilitate accurate histopathological examination for dysplasia as its presence warrants shorter surveillance intervals.

OBJECTIVETo investigate the efficacy of a herbal formula in the prevention of influenza or influenza-like syndrome among elderies residing in old-people's home in Hong Kong. The secondary objectives are to investigate the quality of life (QOL) and symptomology changes among the herbal users and to evaluate the safety of this formula.

METHODSIn ten old people's home or community centres in New Territories, Hong Kong, 740 eligible subjects agreed to join the study and were randomized to receive a herbal formula or a placebo on alternate days over 8 weeks. Among those 740 participants, 113 had provided blood samples for immunological assessments before and after the study drug. Assessments were done at 0, 4, 8 and 12 weeks. Participants were instructed to keep a daily record of body temperature and any symptoms as sore throat, myalgia, running nose or cough, and to report to assessor accordingly. Those reporting body temperature of 37.8 °C and above would be visited and a proper nasopharyngeal swab be taken for viral study.

RESULTSSeventy-two participants developed influenza-like-symptoms but none of them was proven influenza in their nasopharyngeal swabs, 40 of these patients belonged to the herbal group and 32 to the placebo group, without significant differences between groups. The difference on the changes in QOL between the two groups was not statistically significant. However, in the immunological study, the natural killer cell absolute count was significantly increased in the herbal group compared with the placebo group (463 ± 253 vs 413 ± 198, P<0.05).

CONCLUSIONSThe herbal preparation was not effective compared with placebo in the prevention of influenza-like syndrome. It was however safe and possibly supporting immunological responses.

Aged ; Demography ; Double-Blind Method ; Drugs, Chinese Herbal ; adverse effects ; therapeutic use ; Female ; Humans ; Immunologic Tests ; Influenza, Human ; drug therapy ; immunology ; prevention & control ; Male ; Quality of Life ; Vaccination

OBJECTIVE: To analyze the marginal roughness and marginal fitness of chairside computer-aided design and computer-aided manufacturing (CAD/CAM) laminate veneers with different materials and thicknesses, and to provide a reference for the clinical application of laminate veneers. METHODS: The butt-to-butt type laminate veneers were prepared on resin typodonts, the preparations were scanned, and the laminate veneers were manufactured by chairside CAD/CAM equipment. The laminate veneers were divided into four groups (n=9) according to the materials (glass-matrix ceramics and resin-matrix ceramics) and thickness (0.3 mm and 0.5 mm) of the veneers, with a total of 36. The marginal topo-graphies of each laminate veneer were digitally recorded by stereomicroscope, and the marginal rough-nesses of the laminate veneers were determined by ImageJ software. The marginal fitness of the laminate veneers was measured by a fit checker and digital scanning and measuring method. At the same time, the mechanical properties of glass-matrix ceramic and resin-matrix ceramic bars (n=20) were tested by a universal testing device. RESULTS: The marginal roughness of 0.3 mm and 0.5 mm glass-matrix ceramic laminate veneers was (24.48±5.55) μm and (19.06±5.75) μm, respectively, with a statistically significant difference (P < 0.001). The marginal roughness of 0.3 mm and 0.5 mm resin-matrix ceramic laminate veneers was (6.13±1.27) μm and (6.84±2.19) μm, respectively, without a statistically significant difference (P>0.05). The marginal roughness of the glass-matrix ceramic laminate veneers was higher than that of the resin-matrix ceramic laminate veneers with a statistically significant difference (P < 0.001). The marginal fitness of 0.3 mm and 0.5 mm glass-matrix ceramic laminate veneers were (66.30±26.71) μm and (85.48±30.44) μm, respectively. The marginal fitness of 0.3 mm and 0.5 mm resin-matrix ceramic laminate veneers were (56.42±19.27) μm and (58.36±8.33) μm, respectively. There was no statistically significant difference among the 4 groups (P>0.05). For glass-matrix ceramics, the flexural strength was (327.40±54.25) MPa, the flexural modulus was (44.40±4.39) GPa, and the modulus of resilience was (1.24±0.37) MPa. For resin-matrix ceramics, the flexural strength was (173.71±16.61) MPa, the flexural modulus was (11.88±0.51) GPa, and the modulus of resilience was (1.29±0.27) MPa. The flexural strength and modulus of glass-matrix ceramics were significantly higher than those of resin-matrix ceramics (P < 0.001), but there was no statistically significant difference in the modulus of resilience between the two materials (P>0.05). CONCLUSION The marginal roughness of CAD/CAM glass-matrix ceramic laminate veneers is greater than that of resin-matrix ceramic laminate veneers, but there was no statistically significant difference in marginal fitness among them. Increasing the thickness can reduce the marginal roughness of glass-matrix ceramic laminate veneers, but has no effect on the marginal roughness of resin-matrix ceramic laminate veneers.
Ceramics ; Computer-Aided Design ; Dental Porcelain ; Dental Veneers ; Materials Testing ; Surface Properties