This study evaluated the microleakage performance of four self-etcing primer adhesives(Clearfil SE Bond, Clearfil Liner Bond 2, UniFil Bond, and FL Bond) and one self-etching adhesive(Prompt L-Pop). Class V cavity preparations with occlusal margins in enamel and gingival margins in dentin were prepared on both buccal and lingual surfaces of 50 extracted human molar teeth. Prepared teeth were randomly divided into five groups and restored using one of five adhesives and composite resins: Prompt L-Pop/Filtek Z 250(Group 1), Clearfil SE Bond/Clearfil AP-X(Group 2), Clearfil Liner Bond 2/Clearfil AP-X(Group 3), UniFil Bond/UniFil F(Group 4), and FL Bond/Filtek Z 250(Group 5). Following one day storage in room temperature water, the restored teeth were thermocycled for 500 cycles between 5degrees C and 55degrees C. Marginal microleakage was assessed by dye penetration using 2% methylene blue dye. After 24 hours, the teeth were sectioned longitudinally and evaluated for microleakage under steromicroscope. The data were statistically analysed by Kruskal-Wallis Test, Mann-Whitney and Wilcoxon signed ranked tests. The results of this study were as follows; 1. The microleakges at both enamel and dentinal margins were the lowest in group 4, increasing among groups in the following order: group 2, follwed by group 5, follwed by group 1, and the highest in group 3. 2. At the enamel margins, the microleakage of group 3 was significantly higher than those of groups 2, 4 and 5(p<0.05), and also the microleakage of group 1 was statistically higher than those of groups 2 and 5(p<0.05). 3. At the dentinal margins, microleakage of group 3 was significantly higher than microleakages of groups 1, 2, 4 and 5(p<0.05). 4. Compared with microleakages between the enamel and dentinal margins of each group, groups 1, 4 and 5 at enamel margin and group 2 and group 3 at dentinal margin were higher microleakage. But there was no significant difference between enamel and dentinal microleakages of each group(p>0.05).
Adhesives ; Dental Enamel ; Dentin ; Humans ; Methacrylates ; Methylene Blue ; Molar ; Resin Cements ; Tooth ; Water

The purpose of this study was to evaluate the difference of surface roughness of composite resin according to composite resin type, polishing methods, and use of resin sealant. Two hundred rectangular specimens, sized 8 x 3 x 2 mm, were made of Micro-new (Bisco, Inc., Schaumburg, IL, U.S.A) and Filtek Supreme (3M ESPE Dental Products, St. Paul, MN, U.S.A.), and divided into two groups; Micronew-M group, Filtek Supreme-S group. Specimens for each composite group were subdivided into five groups by finishing and polishing instruments used; M1 & S1 (polyester strip), M2 & S2 (Sof-Lex disc), M3 & S3 (Enhance disc and polishing paste), M4 & S4 (Astropol), and M5 & S5 (finishing bur). Polished groups were added letter B after the application of resin surface sealant (Biscover), eg, M1B and S1B. After specimens were stored with distilled water for 24 hr, average surface roughness (Ra) was taken using a surface roughness tester. Representative specimens of each group were examined by FE-SEM (S-4700: Hitachi High Technologies Co., Tokyo, Japan). The data were analysed using paired t-test, ANOVA and Duncan's tests at the 0.05 probability level. The results of this study were as follows; 1. The lowest Ra was achieved in all groups using polyester strip and the highest Ra was achieved in M5, S5 and M5B groups using finishing bur. On FE-SEM, M1 and S1 groups provided the smoothest surfaces, M5 and S5 groups were presented the roughest surfaces and voids by debonding of filler on the polished specimens. 2. There was no significant difference in Ra between Micronew and Filtek Supreme before the application of resin sealant, but Micronew was smoother than Filek Supreme after the application of resin sealant. 3. There was significant corelation between Ra of type of composite resin and polishing methods before the application of resin sealant (p = 0.000), but no significant interaction between them after the application of resin sealant. On FE-SEM, most of composite resin surfaces were smooth after the application of resin sealant on the polished specimens. 4. Compared with before and after the application of resin sealant in group treated in the same composite and polishing methods, Ra of M4B and M5B was statistically lower than that of M4 and M5, and S5B was lower than that of S5, respectively (p < 0.05). In conclusion, surface roughness by polishing instruments was different according to type of composite resin. Overall, polyester strip produced the smoothest surface, but finishing bur produced the roughest surface. Application of resin sealant provided the smooth surfaces in specimens polished with Enhance, Astropol and finishing bur, but not provided them in specimens polished with Sof-Lex disc.
Polyesters ; Water

The Korean Society of Nuclear Medicine (KSNM) is celebrating its 60th anniversary in honor of the nuclear medicine professionals who have dedicated their efforts towards research, academics, and the more comprehensive clinical applications and uses of nuclear imaging modalities. Nuclear cardiology in Korea was at its prime time in the 1990s, but its growth was interrupted by a long pause. Despite the academic and practical challenges, nuclear cardiology in Korea now meets the second leap, attributed to the growth in molecular imaging tailored for many non-coronary diseases and the genuine values of nuclear myocardial perfusion imaging. In this review, we describe the trends, achievements, challenges, and perspectives of nuclear cardiology throughout the 60-year history of the KSNM.

OBJECTIVE: Considerable recurrence rates have been reported for chronic subdural hematoma (CSDH) following surgical evacuation. The aim of this study was to determine the independent factors and features of CSDH that are associated with postoperative recurrence. METHODS: Retrospective analysis of 136 consecutive patients diagnosed with CSDH who were surgically treated from September 2005 to December 2011 was performed. The demographic data, clinical characteristics, radiologic features were analyzed to clarify the correlation between independent variables and postoperative recurrence of CSDH. RESULTS: CSDH was resolved within 1 month following surgery in 51 patients (37.5%), between 1 to 3 months in 59 patients (43.4%), and past 3 months in 14 patients (10.3%). A total of 12 patients (8.8%) experienced recurrence of CSDH, and reoperation was performed in all recurred cases. The average duration between initial surgery and reoperation was 20.1 days. Delayed resolution and recurrence were more commonly presented in bilateral CSDH, but this data was not statistically significant. Large hematomas with maximum thickness over 20 mm were significantly correlated with higher recurrence rates of CSDH (p=0.032). In addition, the incidence of recurrence was significantly higher in the cases with high-density and mixed-density hematomas according to brain computed tomography (CT) findings (p=0.0026). CONCLUSION: The thickness and density of the hematoma is significantly correlated with higher recurrence rates of CSDH. Discerning these risk factors could be beneficial in predicting the postoperative recurrence of CSDH.
Brain ; Hematoma ; Hematoma, Subdural, Chronic ; Humans ; Incidence ; Recurrence ; Reoperation ; Retrospective Studies ; Risk Factors

The traumatic C1-C2 unifacetal joint dislocation associated with oblique fractures of the C2 body and arch is a rare injury that can be effectively treated with gentle closed reduction under fluoroscopic guidance followed by halo vest immobilization. To our knowledge, however, there are only a few reported cases of this injury. Recognition of associated conditions including vertebral artery compromise, concomitant cervical spine fractures, and life-threatening injuries is paramount to the successful treatment of these patients. A 29-year-old patient, who presented a unifacetal dislocation at C1-C2 with associated oblique fractures of the C2 body and arch, is reported. Closed reduction with Gardner-Wells tong and halo vest application was performed. After 3 months of application of halo vest, the fractures of C2 body and arch had the complete union and the C1-2 dislocation had the good reduction. He had no pain and discomfort in his neck for about 2 years after halo vest removal.
Adult ; Dislocations ; Humans ; Immobilization ; Joints ; Neck ; Spine ; Vertebral Artery

BACKGROUND: Amplification of the chromosome 11q13 region has been observed in a variety of human cancers, including head and neck squamous cell carcinoma and carcinomas of breast, esophagus, lung, bladder, and liver. The chromosome 11q13 region has various putative oncogenes, of which cyclin D1 is most consistently amplfied and overexpressed. OBJECTIVES: To estabilsh the frequency and clinicopathologic correlations of cyclin D1 amplification in head and neck squamous cell carcinomas. MATERIALS AND METHODS: Fresh tissue samples were obtained from 26 patients with head and neck cancers undergoing surgery or biopsy. Amplification of cyclin D1 was evaluated in 26 head and neck squamous cell carcinomas by Southern blotting. The presence or absence of amplification was correlated with anatomic site, tumor stage, and differentiation pattern. RESULTS: Five tumors of 26(19%) showed a twofold to 4-fold amplification of cyclin D1 compared with beta-actin control prove. Amplified and nonamplified groups revealed no differences in anatomic primary site, stage, N stage, and pathologic differentiation. CONCLUSION: We showed a significant incidence of cyclin D1 amplification in head and neck squamous cell carcinomas, but cannot demonstrate an association with clinical presentation and pathologic findings.
Actins ; Biopsy ; Blotting, Southern ; Breast ; Carcinoma, Squamous Cell* ; Cyclin D1* ; Cyclins* ; Esophagus ; Head* ; Humans ; Incidence ; Liver ; Lung ; Neck* ; Oncogenes ; Urinary Bladder

Ganoderma lucidum has a long history of use as a traditional medicine in Asian countries. However, the taxonomy of Ganoderma species remains controversial, since they were initially classified on the basis of their morphological characteristics. Recently, it was proposed that G. lucidum from China be renamed as G. sichuanense or G. lingzhi. In the present study, phylogenetic analysis using the internal transcribed spacer region rDNA sequences of the Ganoderma species indicated that all strains of the Korean 'G. lucidum' clustered into one group together with G. sichuanense and G. lingzhi from China. However, strains from Europe and North American, which were regarded as true G. lucidum, were positioned in a clearly different group. In addition, the average size of the basidiospores from the Korean cultivated Yeongji strains was similar to that of G. lingzhi. Based on these results, we propose that the Korean cultivated Yeongji strains of 'G. lucidum' should be renamed as G. lingzhi.
Asian Continental Ancestry Group ; China ; Classification ; DNA, Ribosomal ; Europe ; Ganoderma ; Humans ; Korea* ; Medicine, Traditional ; Phylogeny ; Reishi

Objectives: Smart hospitals involve the application of recent information and communications technology (ICT) innovations to medical services; however, the concept of a smart hospital has not been rigorously defined. In this study, we aimed to derive the definition and service types of smart hospitals and investigate cases of each type. Methods: A literature review was conducted regarding the background and technical characteristics of smart hospitals. On this basis, we conducted a focus group interview with experts in hospital information systems, and ultimately derived eight smart hospital service types. Results: Smart hospital services can be classified into the following types: services based on location recognition and tracking technology that measures and monitors the location information of an object based on short-range communication technology; high-speed communication network-based services based on new wireless communication technology; Internet of Things-based services that connect objects embedded with sensors and communication functions to the internet; mobile health services such as mobile phones, tablets, and wearables; artificial intelligence-based services for the diagnosis and prediction of diseases; robot services provided on behalf of humans in various medical fields; extended reality services that apply hyper-realistic immersive technology to medical practice; and telehealth using ICT. Conclusions Smart hospitals can influence health and medical policies and create new medical value by defining and quantitatively measuring detailed indicators based on data collected from existing hospitals. Simultaneously, appropriate government incentives, consolidated interdisciplinary research, and active participation by industry are required to foster and facilitate smart hospitals.

Objective: To determine the factors affecting the amount of weight-bearing during gait training in the elderly patients who underwent internal fixation after femur or pelvic fractures and how well they performed the weight-bearing restriction as directed by the physiatrist. Methods: In this retrospective chart review study, we measured the amount of weight-bearing on the affected side in 50 patients undergoing internal fixation surgery and rehabilitation after femur or pelvic fracture using a force plate. Patients receiving non-weight-bearing or partial weight-bearing education were considered to perform weight-bearing restriction well when the amount of weight-bearing was <50 lb. Furthermore, regression analysis was performed to determine the effects of postoperative complications, age, cognitive function, and pain on weightbearing restriction. Results: Variables affecting the amount of weight-bearing were age (r=0.581, p<0.001), weight-bearing education type (r=0.671, p<0.001), manual muscle strength of hip flexion on the non-affected side (r=-0.296, p=0.037), hip abduction (r=-0.326, p=0.021), knee extension (r=-0.374, p=0.007), ankle plantar flexion (r=-0.374, p=0.008), right hand grip strength (r=-0.535, p<0.001), Korean version of Mini-Mental State Examination (r=-0.496, p<0.001), Clinical Dementia Rating (r=0.308, p=0.03), and pain visual analog scale scores (r=0.318, p=0.024). The significant predictor of the amount of weight-bearing among these variables was age (β=0.448, p=0.001). The weight-bearing restriction adherence rate was significantly lower, at 22%, for patients aged ≥65 years as compared to 73% for those <65 years. Conclusion Age was a major variable affecting the amount of weight-bearing. Compliance with weight-bearing restriction was significantly lower in patients aged ≥65 years than in patients <65 years.

PURPOSE: To determine whether late open reduction and internal fixation (ORIF) of a lateral condylar fracture (LCF) after 3 weeks is possible, and to determine the latest time for ORIF without a bone graft. MATERIALS AND METHODS: Eight children underwent late ORIF (>3 weeks) of a displaced LCF (>2.5 mm) of the humerus between 3 weeks and 5 weeks after injury. RESULTS: Clinically, results were excellent in 6 cases and good in 2 cases. There was no serious complication, including nonunion and avascular necrosis (AVN), though 2 cases had a slight fishtail deformity and mild carrying angle loss due to overgrowth of the lateral condyle fragment. CONCLUSION: We believe that 3 weeks is too short to deny open reduction and anatomic reduction for fear of AVN of a late presented lateral condyle fracture of the humerus. The latest time for ORIF in late presented LCF in children is around 5 weeks, and surgical treatment may even be possible after greater delays.
Child ; Congenital Abnormalities ; Humans ; Humerus ; Lifting ; Necrosis ; Transplants