This study aimed at investigating the drug preparation of precise powder decoction pieces (PPDP) system,Fallopia multiflora radix preparata (FMRP) was employed in this study.Different specifications of PPDP were prepared,their extract rates were in contrast with the original pieces.Compared the quality uniformity of three batches between FMRP original slices and its PPDP extraction,the similarity of the chemical fingerprints was evaluated,and the contents of common peaks and quality uniformity were compared by relative peak areas.ITS2 sequence was taken as a DNA barcode to identify F.multiflora radix (FMR).As a result,the extract rate of PPDP was 2.5 times as much as the original slices.The average content of stilbene glucoside from the three original slices and the PPDP extraction were 3.56 ± 2.61 and 13.23 ± 0.37 mg·g-1,respectively;while the RSD were 73.28％ and 2.82％.The similarity of the fingerprints of the PPDP extraction was almost the same as that of the original slices,but the content and the uniformity of the common peaks of the PPDP extraction were significantly improved.Thus,FMR was accurately identified using ITS2 sequences.It was concluded that the PPDP considerably improve the decocting rate and quality uniformity,indicating that PPDP could save resources and improve the clinical efficacy.

OBJECTIVETo study the effect of emodin on the proliferation, cell cycle distribution, apoptosis and expression of hematopoietic growth factors in bone marrow mesenchymal stem cells (BMSCs).

METHODSThe proliferation of rat BMSCs exposed to emodin was analyzed using MTT assay, and flow cytometry was used to detect the apoptosis and cell cycle changes of the exposed cells. Real-time quantitative PCR was used to determine the mRNA expression of the hematopoietic growth factors.

RESULTSExposure to 0.1 and 1 µg/ml emodin for 48 and 72 h significantly enhanced the proliferation of BMSCs (P<0.01). The cells exposed to 0.1 µg/ml emodin showed significantly increased percentage of cells in G2/M phase (P<0.05), and 1 µg/ml emodin exposure caused increased cells in S phase (P<0.01) and decreased cells in G1/G0 phase (P<0.05). Emodin exposure for 48 h resulted in significantly decreased cell apoptosis (P<0.05). BMSCs treated with 0.1 µg/ml emodin showed a significant increase in the expression of thrombopoietin mRNA (P<0.05).

CONCLUSIONEmodin can promote the proliferation of BMSCs in vitro possibly by regulating the cell cycle distribution, cell apoptosis and thrombopoietin expression.

Animals ; Apoptosis ; Cell Cycle ; Cell Proliferation ; drug effects ; Emodin ; pharmacology ; Hematopoietic Cell Growth Factors ; metabolism ; Mesenchymal Stromal Cells ; cytology ; drug effects ; RNA, Messenger ; Rats

OBJECTIVETo explore new source of skin for burn wound coverage.

METHODSSplit-thickness consanguineous skin was harvested from New Zealand white rabbit and was soaked in 200 g/L of multi-peptides of Tripterygium wilfordii, 50 g/L of dexamethasonel, on 9 g/L of normal saline solution for 15 - 30 mins, respectively. The consanguineous skin was thereafter grafted onto the whole layer skin defects in filial generation of rabbits with non-consanguineous skin as the control. The survival time and rejection of the grafted skin was observed.

RESULTSThe rejection appeared evidently less intense and survived significantly longer (43 +/- 3.5 days) when the consanguineous skin was pretreated by Tripterygium wilfordii. However the grafted consanguineous skin survived for 30 +/- 2.5 days when it was pretreated by dexamethasone. The grafted skin was quickly rejected and survived only for 11 +/- 1.6 days when the skin was pretreated by normal saline or the skin was non-consanguineous.

CONCLUSIONConsanguineous skin possessed partial compatibility with the recipient due to similar antigen, which was beneficial to the its survival, especially after the skin was pretreated.

Animals ; Anti-Inflammatory Agents ; pharmacology ; Burns ; surgery ; Dexamethasone ; pharmacology ; Female ; Graft Rejection ; Graft Survival ; Male ; Plant Extracts ; pharmacology ; Rabbits ; Skin ; drug effects ; Skin Transplantation ; methods ; Transplantation, Isogeneic ; Tripterygium ; Wound Healing

ObjectiveTo clarify the feasibility of the 3D scanning volume method for distal upper limb volume measurement, and to analyze its scorer reliability and criterion-related validity. MethodsFrom January to March, 2022, a therapist (operator A) who had not been exposed to 3D scanning volume method and water displacement method was trained to use a handheld 3D laser scanner and a spilt cup to measure the volume of a PVC distal upper limb model. The operation time of 30 operations of each method was recorded. The learning curves of the two methods were plotted using cumulative sum (CUSUM) analysis. The curve was cut into the learning stage and the mastery stage by the vertex of peak. The times required to reach the mastery stage and the operation time of the mastery stage for the two methods were recorded. A total of 20 healthy subjects were recruited from Huashan Hospital of Fudan University. Two trained therapists (operator A and operator B) measured the bilateral distal upper limb volume using a handheld 3D laser scanner, and operator A measured the bilateral distal upper limb volume using a spilt cup. ResultsThe fitting learning curve of the 3D scanning volume method (R² = 0.984) reached its peak after eight times of operation; while that of the water displacement method (R² = 0.494) reached its peak after five times of operation. At mastery stage, the operator spent less time using 3D scanning volume method than using water displacement method (P < 0.05). The intraclass correlation coefficient between the two operators were both 0.979 for bilateral distal upper limb volume measure (P < 0.001). The Pearson coefficients was above 0.979 between 3D scanning volume method and water displacement method (P < 0.001). ConclusionA therapist can master the use of the 3D scanning volume method after eight times of operation, and the operation time of 3D scanning volume method is shorter than that of water displacement method at mastery stage. The 3D scanning volume method is well reliable and valid, that can be used as an alternative to the water displacement method for distal upper limb volumetric measurement.

OBJECTIVE： To investigate the effects of different polar parts of 5 kinds of Alpinia on the function of sympathetic-adrenal system in gastric ulcer model rats with cold syndrome， such as the root of Alpinia officinarum， the rhizome and fruit of Alpinia galangal， the seed of Alpinia katsumadai， and the fruit of Alpinia oxyphylla. METHODS： SD rats were given Anemarrhena asphodeloides decoction at 4 ℃ and Glacial acetic acid solution intragastrically to induce gastric ulcer model with cold syndrome； the model rats were randomly divided into model group， Fuzi lizhong pills group （positive control， 9.0 g/kg）， cimetidine group （positive control， 0.003 3 g/kg）， low-dose and high-dose groups of petroleum ether， ethyl acetate， n-butanol and water extraction parts from 5 medicinal materials （hereinafter referred to as “gaoshidi” “gaoshigao” “dashidi” “dashigao” “hongshidi” “hongshigao” “caoshidi” “caoshigao” “yishidi” “yishigao” “gaoyidi” “gaoyigao” “dayidi” “dayigao” “hongyidi” “hongyigao” “caoyidi” “caoyigao” “yiyidi” “yiyigao” “gaozhengdi” “gaozhenggao” “dazhengdi” “dazhenggao” “hongzhengdi” “hongzhenggao” “caozhengdi” “caozhenggao” “yizhengdi” “yizhenggao” “gaoshuidi” “gaoshuigao” “dashuidi” “dashuigao” “hongshuidi” “hongshuigao” “caoshuidi” “caoshuigao” “yishuidi” “yishuigao”， 0.064/0.256， 0.032/ 0.128， 0.008/0.032， 0.075/0.3， 0.1/0.4， 0.064/0.256， 0.108/0.432， 0.16/0.64， 0.064/0.25， 0.125/0.5， 0.056/0.224， 0.108/0.432， 0.08/0.32， 0.2/0.8， 0.3/1.2， 0.14/0.56， 0.032/0.128， 0.028/0.112， 0.05/0.2， 0.087/0.348 g/kg， by mass of extraction parts）， with 10 rats in each group； and the blank group （normal temperature water） was set up. Next day after modeling， blank group and model group were given constant volume of normal temperature water intragastrically； administration group was given relevant solution 2 mL/100 g intragastrically， q12 h， 4 times in total. After last medication， urine contents of 17-OHCS， CAs substances （A， NE， DA） and serum contents of ACTH and D-β-H were determined by ELISA. RESULTS： Compared with blank group， the contents of 17-OHCS， A， NE and DA in urine， the contents of ACTH and D-β-H in serum were decreased significantly in model group （P＜0.01）. Compared with model group， the contents of 17-OHCS （Fuzi lizhong pills group， cimetidine group， gaoshidi， gaoshigao， dashigao， hongshigao， caoshigao and yishigao groups， ethyl acetate part groups of 5 medicinal materials， dazhenggao， hongzhenggao， caozhenggao and yizhenggao groups， gaoshuigao， dashuigao and hongshuigao groups）， A （Fuzi lizhong pills group， cimetidine group， gaoshigao， dashigao， hongshidi， hongshigao， caoshidi， caoshigao and yishigao groups， ethyl acetate part groups of 5 medicinal materials， gaozhenggao， dazhenggao， hongzhengdi， hongzhenggao， caozhenggao and yizhenggao groups， hongshuigao group）， NE （Fuzi lizhong pills group， cimetidine group， petroleum ether part， ethyl acetate part and n-butanol part groups of 5 medicinal materials， gaoshuigao， dashuigao and hongshuigao groups）， DA [Fuzi lizhong pills group， cimetidine group， petroleum ether part （except for gaoshidi group） and ethyl acetate part groups of 5 medicinal materials， gaozhenggao， dazhenggao， hongzhenggao， caozhenggao and yizhenggao groups， hongshuigao group] in urine， serum contents of ACTH [Fuzi lizhong pills group， petroleum ether part （except for gaoshidi， dashidi and caoshidi groups） and ethyl acetate part （except for dayidi and hongyidi groups） groups of 5 medicinal materials， hongzhenggao group， dashuigao group]， and D-β-H [Fuzi lizhong pills group， gaoshigao， dashigao， hongshidi， hongshigao and yishigao groups， ethyl acetate part groups of 5 medicinal materials （except for dayidi， hongyidi and yiyidi groups）， dazhenggao and hongzhenggao groups， hongshuigao group] were increased significantly （P＜0.05 or P＜0.01）. The contents of 17-OHCS and D-β-H in dashigao group， the contents of ACTH and D-β-H in caoshigao group and the contents of D-β-H in gaoshigao and yishigao groups were significantly lower than hongshigao group. The contents of DA in gaoyigao， caoyigao and yiyigao groups as well as the contents of D-β-H in gaoyigao， hongyigao， caoyigao and yiyigao groups were significantly lower than dayigao group； the contents of DA in gaoyigao and caoyigao groups were significantly lower than hongyigao group， the contents of ACTH in gaoyigao， dayigao， caoyigao and yiyigao groups were significantly higher than hongyigao group. The contents of 17-OHCS， DA and ACTH in gaozhenggao， dazhenggao， caozhenggao and yizhenggao groups， the contents of A in dazhenggao， caozhenggao and yizhenggao groups as well as the contents of D-β-H in gaozhenggao， caozhenggao and yizhenggao groups were significantly lower than hongzhenggao group. The contents of 17-OHCS and D-β-H in caoshuigao and yishuigao groups were significantly lower than dashuigao group. The contents of 17-OHCS， DA and D-β-H in caoshuigao and yishuigao groups as well as the contents of DA and D-β-H in gaoshuigao groups were significantly lower than hongshuigao group （P＜0.05 or P＜0.01）. CONCLUSIONS： Different polar parts of 5 kinds of Alpinia can improve gastric ulcer model rats with cold syndrome to different extents； among them， the fruit of A. galangal is the best， followed by the root of A. officinarum. Above medicinal materials can regulate the function of sympathetic-adrenal system by increasing the contents of 17-OHCS， CAs and D-β-H.

OBJECTIVE：To establ ish the fingerprint of Sojae Semen Nigrum and content determination method of 5 kinds of isoflavones，so as to provide reference for controlling its quality better. METHODS ：HPLC method was adopted to establish the fingerprint and detect the contents of 5 kinds of isoflavones. The determination was performed on Phenomenex C 18 column with mobile phase consisted of acetonitrile- 0.12％ formic acid solution （gradient elution ）at the flow rate of 1 mL/min. The detection wavelength was set at 260 nm；the column temperature was 30 ℃ and sample size was 10 μL. Using daidzin as reference，HPLC fingerprints of 12 batches of samples were determined. The similarity of 12 batches of samples was evaluated by TCM Chromatographic Fingerprint Similarity Evaluation System （2012A） to confirm common peak. Cluster analysis and principal component analysis were performed by using SPSS 20.0 software and SIMCA 13.0 software. RESULTS ：There were 19 common peaks in HPLC fingerprints of 12 batches of samples ，the similarity of which was higher than 0.94. Totally 5 components were identified，such as daidzin ，glycitin，genistin，daidzein，genistein. Cluster analysis showed that 12 batches of Sojae Semen Nigrum were clustered into 2 categories，i.e. S 1-S3 clustered into one category ，and S 4-S12 clustered into the other category. By principal component analysis ，the contribution rates of two principle components were 53.261％ and 40.715％；accumulative contribution rate was 93.976％. The linear range of above 5 components were 5.97-191.00 µg/mL（r＝0.999 9），1.05-33.46 µg/mL（r＝0.999 9）， 8.93-285.61 µg/mL（r＝0.999 5），0.82-26.33 µg/mL（r＝0.999 9），0.93-29.64 µg/mL（r＝0.999 7），respectively. The limits of quantitation were 0.881 1，0.611 6，0.078 6，0.243 3，0.511 6 μg/mL，respectively. The limits of detection were 0.264 3，0.244 7， 0.021 4，0.124 8，0.106 7 μg/mL，respectively. RSDs of precision ，stability，reproducibility and durability tests were all lower than 5％. Recoveries were 95.15％-96.56％（RSD＝0.51％，n＝6），98.52％-103.45％（RSD＝1.88％，n＝6），95.37％-97.91％ （RSD＝0.95％，n＝6），99.75％-102.00％（RSD＝0.78％，n＝6），100.26％-103.65％（RSD＝1.21％，n＝6）. Among 12 batches of Sojae Semen Nigrum ，the contents of above 5 components were 0.178 3-0.265 9，0.021 7-0.096 2，0.288 5-0.597 2，0.014 1- 0.058 8，0.012 9-0.082 9 mg/g. CONCLUSIONS ：Established HPLC fingerprint and content determination method of 5 kinds of isoflavones can be used for quality control of Sojea Semen Nigrum. The Isoflavone components are similar ，but the contents are different among Sojae Semen Nigrum from different producing areas.

OBJECTIVE：To analyze the metabolites of tetrahydroxystilbene glucoside （THSG）and speculate its metabolism pathway in rats. METHODS ：Male SD rats were randomly divided into plasma group （n＝3），urine group （n＝3），bile group （n＝3），and tissue group （n＝9）. Each group was given single dose of THSG 200 mg/kg intragastrically. Plasma samples 10，30 min and 1，1.5，2，4 h after medication ，the unrine 0-6 h after medication ，the bile 0-4 h after medication ，the tissue of heart ， liver，spleen，lung，kidney and stomach 30 min and 1，2 h after medication （3 at each time point ）were collected respectively.After precipitated with methanol ，the metabolites of samples were analyzed and identified by UHPLC-Q-Exactive Orbitrap MS and mass loss filtration （MDF）. Its metabolism pathway was speculated. RESULTS：In the blood ，urine，bile，heart，liver，spleen， lung，kidney，stomach samples ，6，7，11，1，5，1，3，4，4 metabolites were detected ，including two phase Ⅰ（hydrolysis， hydrogenation and hydroxylation ）metabolites，18 phase Ⅱ（glucuronic acid binding and sulfation ）metabolites. There were 12 glucuronic acid binding products. CONCLUSIONS：Most of the metabolites of THSG are found in bile ，mainly glucuronic acid binding products of phase Ⅱ metabolite THSG ； main metabolic pathways involve glucose hydrolysis ， hydrogenation， hydroxylation，glucuronic acid binding and sulfation.

Digital intraoral scanning is a hot topic in the field of oral digital technology. In recent years, digital intraoral scanning has gradually become the mainstream technology in orthodontics, prosthodontics, and implant dentistry. The precision of digital intraoral scanning and the accuracy and stitching of data collection are the keys to the success of the impression. However, the operators are less familiar with the intraoral scanning characteristics, imaging processing, operator scanning method, oral tissue specificity of the scanned object, and restoration design. Thus far, no unified standard and consensus on digital intraoral scanning technology has been achieved at home or abroad. To deal with the problems encountered in oral scanning and improve the quality of digital scanning, we collected common expert opinions and sought to expound the causes of scanning errors and countermeasures by summarizing the existing evidence. We also describe the scanning strategies under different oral impression requirements. The expert consensus is that due to various factors affecting the accuracy of digital intraoral scanning and the reproducibility of scanned images, adopting the correct scanning trajectory can shorten clinical operation time and improve scanning accuracy. The scanning trajectories mainly include the E-shaped, segmented, and S-shaped methods. When performing fixed denture restoration, it is recommended to first scan the abutment and adjacent teeth. When performing fixed denture restoration, it is recommended to scan the abutment and adjacent teeth first. Then the cavity in the abutment area is excavated. Lastly, the cavity gap was scanned after completing the abutment preparation. This method not only meets clinical needs but also achieves the most reliable accuracy. When performing full denture restoration in edentulous jaws, setting markers on the mucosal tissue at the bottom of the alveolar ridge, simultaneously capturing images of the vestibular area, using different types of scanning paths such as Z-shaped, S-shaped, buccal-palatal and palatal-buccal pathways, segmented scanning of dental arches, and other strategies can reduce scanning errors and improve image stitching and overlap. For implant restoration, when a single crown restoration is supported by implants and a small span upper structure restoration, it is recommended to first pre-scan the required dental arch. Then the cavity in the abutment area is excavated. Lastly, scanning the cavity gap after installing the implant scanning rod. When repairing a bone level implant crown, an improved indirect scanning method can be used. The scanning process includes three steps: First, the temporary restoration, adjacent teeth, and gingival tissue in the mouth are scanned; second, the entire dental arch is scanned after installing a standard scanning rod on the implant; and third, the temporary restoration outside the mouth is scanned to obtain the three-dimensional shape of the gingival contour of the implant neck, thereby increasing the stability of soft tissue scanning around the implant and improving scanning restoration. For dental implant fixed bridge repair with missing teeth, the mobility of the mucosa increases the difficulty of scanning, making it difficult for scanners to distinguish scanning rods of the same shape and size, which can easily cause image stacking errors. Higher accuracy of digital implant impressions can be achieved by changing the geometric shape of the scanning rods to change the optical curvature radius. The consensus confirms that as the range of scanned dental arches and the number of data concatenations increases, the scanning accuracy decreases accordingly, especially when performing full mouth implant restoration impressions. The difficulty of image stitching processing can easily be increased by the presence of unstable and uneven mucosal morphology inside the mouth and the lack of relatively obvious and fixed reference objects, which results in insufficient accuracy. When designing restorations of this type, it is advisable to carefully choose digital intraoral scanning methods to obtain model data. It is not recommended to use digital impressions when there are more than five missing teeth.

Regenerative endodontic procedures (REPs) is a biologic-based treatment modality for immature permanent teeth diagnosed with pulp necrosis. The ultimate objective of REPs is to regenerate the pulp-dentin complex, extend the tooth longevity and restore the normal function. Scientific evidence has demonstrated the efficacy of REPs in promotion of root development through case reports, case series, cohort studies, and randomized controlled studies. However, variations in clinical protocols for REPs exist due to the empirical nature of the original protocols and rapid advancements in the research field of regenerative endodontics. The heterogeneity in protocols may cause confusion among dental practitioners, thus guidelines and considerations of REPs should be explicated. This expert consensus mainly discusses the biological foundation, the available clinical protocols and current status of REPs in treating immature teeth with pulp necrosis, as well as the main complications of this treatment, aiming at refining the clinical management of REPs in accordance with the progress of basic researches and clinical studies, suggesting REPs may become a more consistently evidence-based option in dental treatment.
Humans ; Consensus ; Regenerative Endodontics ; Dental Pulp Necrosis/therapy* ; Dentists ; Professional Role ; Dental Care

Digital guided therapy (DGT) has been advocated as a contemporary computer-aided technique for treating endodontic diseases in recent decades. The concept of DGT for endodontic diseases is categorized into static guided endodontics (SGE), necessitating a meticulously designed template, and dynamic guided endodontics (DGE), which utilizes an optical triangulation tracking system. Based on cone-beam computed tomography (CBCT) images superimposed with or without oral scan (OS) data, a virtual template is crafted through software and subsequently translated into a 3-dimensional (3D) printing for SGE, while the system guides the drilling path with a real-time navigation in DGE. DGT was reported to resolve a series of challenging endodontic cases, including teeth with pulp obliteration, teeth with anatomical abnormalities, teeth requiring retreatment, posterior teeth needing endodontic microsurgery, and tooth autotransplantation. Case reports and basic researches all demonstrate that DGT stand as a precise, time-saving, and minimally invasive approach in contrast to conventional freehand method. This expert consensus mainly introduces the case selection, general workflow, evaluation, and impact factor of DGT, which could provide an alternative working strategy in endodontic treatment.
Humans ; Consensus ; Endodontics/methods* ; Tooth ; Printing, Three-Dimensional ; Dental Care ; Cone-Beam Computed Tomography ; Root Canal Therapy