Traumatic Brain Injury(TBI) of any severity can result in broad and persisting biopsychosocial sequelae. Depression after TBI occur at a greater frequency than in the general population, with estimates approaching 25% to 50% for major depression, and 155 to 30% for dysthmia. Acute onset depressions are related to lesion location and may have their etiology in biological response of the injured brain, whereas delayed onset depressions may be mediated by psychosocial factors, suggesting psychological reactions as a possible mechanism. Anxious depressions are associated with right hemisphere lesions, whereas major depressions alone are associated with left dorsolateral frontal and left basal ganglia lesions. However, there is insufficient information to postulate a specific neuroanatomic model for TBI-related depression.
Basal Ganglia ; Brain ; Brain Injuries* ; Craniocerebral Trauma ; Depression* ; Psychology

The purpose of this study was to assess the results of passive release of the pulley with needle under local anesthesia performed at the out patient department. There were 68 fingers of 54 patients. Fifteen patients(27.8 %) were male and 39 patients(72.2 %) were female. Involved fingers were 28 thumbs(41.2 %), 7(10.3 %) index fingers, 14(20.6 %) middle fingers, and 19(27.9 %) ring fingers. Ages were varied-between 41 years and 61 years old. Rheumatoid fingers were 12(17.6 %). The others had no underlying disease. An 18 gauge needle was introduced distal to the palpable nodule. The pulley was released passively when the PIP joint was extended. The follow-up period was 4.5 years on average(range; 1-8 years). At final follow-up local recurrence was noted in 1-2 weeks in 7 cases(10.3 %), which was due to technical fault in early trial cases. The patients complained of pain for a few days and mild tenderness for less than 2 weeks. In three cases adhesion occurred, which was resolved in a week by maniqulation. There was no difference between rheumatoid arthritis and the other underlying diseases as far as rate of recurrence was concerned. From these results it would be suggested that the passive release of pulley with needle is an effective method for the treatment of adult trigger finger.
Adult ; Anesthesia, Local ; Arthritis, Rheumatoid ; Female ; Fingers ; Follow-Up Studies ; Humans ; Joints ; Male ; Methods ; Needles ; Recurrence

All-ceramic restorations have become an attractive alternative to porcelain-fused-to-metal crowns. In-Ceram, and more recently IPS Empress 2 were introduced as a new all-ceramic system for single crowns and 3-unit fixed partial dentures. But their strength and marginal fit are still an important issue. This study evaluated the fracture resistance and marginal fit of three systems of 3 unit all-ceramic bridge fabricated on prepared maxillary anterior resin teeth in vitro. The 3 all-ceramic bridge systems were: (1) a glass-infiltrated, sintered alumina system (In-Ceram) fabricated conventionally, (2) the same system with copy-milled alumina cores (copy-milled In-Ceram), (3) a heat pressed, lithium disilicate reinforced glass-ceramic system (IPS Empress 2). Ten bridges of each system with standardized design of framework were fabricated. All specimens of each system were compressed at 55degree at the palatal surface of pontic until catastrophic fracture occurred. Another seven bridges of each system were fabricated with standard method. All of the bridge-die complexes were embedded in epoxy resin and sectioned buccolingually and mesiodistally. The absolute marginal discrepancy was measured with stereomicroscope at x50 power. The following results were obtained: 1. There was no significant difference in the fracture strength among the 3 systems studied. 2. The Weibull modulus of copy-milled In-Ceram was higher than that of In-Ceram and IPS Empress 2 bridges. 3. Copy-milled In-Ceram (112micrometer) exhibited significantly greater marginal discrepancy than In-Ceram (97micrometer), and IPS Empress 2 (94micrometer at P=0.05. 4. The lingual surfaces of the ceramic crowns showed smaller marginal discrepancies than mesial and distal points. There was no significant difference between teeth (incisor, canine) at P=0.05. 5. All-ceramic bridges of three systems appeared to exhibit sufficient initial strength and acceptable marginal fit values to allow clinical application.
Aluminum Oxide ; Ceramics ; Crowns ; Denture, Partial, Fixed ; Hot Temperature ; Lithium ; Tooth

All ceramic restorations have had a more limited life expectancy than metal ceramic crowns because of their lower strength. The relatively lower strength has limited the use of all-ceramic crowns to the areas where occlusal loads are lower. Therefore many researches have been done to increase the strength of all-ceramic crowns. IPS Empress 2 is a new type of lithium disilicate glass-ceramic with enhanced physical characteristics which has been in use clinically since 1998. Previous researches reported that the flexural strength of all-ceramic material was greater than 300MPa, and all-ceramic crowns can be used in staining or layering technique. The objective of this study was to investigate the influence of the thickness of IPS Empress 2 ceramic on fracture strength. Both staining technique and layering technique was investigated. Vita VMK was used as control. For all three groups, five specimens each of 0.8mm, 1.0mm, 1.4mm, 1.8mm, and 2.2mm thickness (a total of 75 specimens) were prepared. Control group: Vita VMK Porcelain specimens were prepared with dentine ceramic and liquid glazing was done. Group I: IPS Empress 2 were prepared with staining technique and stained twice and glazed once. Group II : IPS Empress 2 were prepared with layering technique and glazed after wash firing. The thickness and diameter of the specimen were measured and controlled after specimen preparation. Biaxial Flexure Test (ASTM Standard F394-78) was adopted as this test method produces results least affected by the edge condition of the specimens. Fracture strength was measured with Instron Universal Testing Machine. Conclusions are as follow : 1. The fracture strength was increase in order of control group, test group I, test group II. 2. Fracture strength of the group I(Empress 2 Staining) was 65.54 N in 0.8mm, 155.2 N in 1.0mm, 233.5 N in 1.44mm, 434.5 N in 1.8mm, and 600.1 N in 2.2mm. 3. Fracture strength of the group II (Empress 2 Layering) was 190.0 N in 0.8mm, 283.5 N in 1.0mm, 437.2 N in 1.4mm, 732.0 N in 1.8mm, and 1115.0 N in 2.2mm. 4. No statistical difference was found in flexural strengths according to thickness in a specified group(p>0.05).
Ceramics* ; Crowns ; Dental Porcelain ; Dentin ; Fires ; Life Expectancy ; Lithium

OBJECTIVES: This study is to see the transition and pattern of the industrial iureal worker, and to develop the prediction model. METHODS: The data of the study are based on the samples from data-warehouse of Occupational Safety & Health Research Institute and are summed monthly from Jan 1986 to Dec 1999. This study data used data mart and Meta data from DW in KOSHA. The prediction model of the injured worker in Industry is designed by using a winters time series method after data preparing (i. e. sample, explore, modify) from DW. RESULTS: Thls predicted model obtained Winters-method multiplicative in exponential smoothing among applied all models, after the tlme series (total 163 months). It showed that the prediction power was 95.5 %. CONCLUSIONS: In the process of exploring the data, totally the rate of industrial injureal workers reduced, and in the yearly circulation, in February and September the number is the lowest but in June, July, October and November the higher. The number of monthly average injureal workers is 8709 (95 % confidence interval 8277, 9140). From the developed prediction model, since Aug 1999 the industrial injureal worker reduced rapidly in Dec 1999 and first period of 2000. But In second period of 2000 the number of the injured workers is increasing. To conclude, as the total economic situation is becoming better in 2000 than In 1999, its is supposed that the injured workers will increase more than the predictive injured workers because of the increase of production rate and labor force.
Academies and Institutes ; Data Mining* ; Employment ; Humans ; Occupational Health

No abstract available.
Hematoma*

No abstract available.

No abstract available.
Adult* ; Constriction, Pathologic* ; Humans ; Ventriculostomy*

PURPOSE: To evaluate the MR findings of embolized cerebral arteriovenous malformations according to various embolic materials. MATERIALS AND METHODS: We performed the endovascular embolization using four different kinds of embolic materials in 33 patients. Embolization related changes in the nidus and surrounding brain parenchyme were analyzed and the results were compared with pre- and postembolization MRI, CT and anglographic findings in all patients. RESULTS: Embolized vessels with N-buthyl-2-cyanoacrylate(NBCA) mixture showed some artifact in CT due to metallic character of tantalum powder or fatty nature of lipiodol. But in MRI, it was represented by fatty signals without artifact. In cases of using polyvinyl alcohol and ethylene vinyl alcohol copolymer(EVAL), there were no specific signal by the embolic material except for the disappearance of flow related signals in feeding arteries and shrinkage of venous ectasis. CONCLUSION: MRI is a valuable imaging modality for analysing the morphology and hemodynamics of cerebral AVMs, especially after embolization of pathologic vessels. Recognition of the signal of embolic agents and thus the thrombosed portion could lead to more precise analysis before surgery or radiosurgery.
Arteries ; Artifacts ; Brain ; Ethiodized Oil ; Hemodynamics ; Humans ; Intracranial Arteriovenous Malformations ; Magnetic Resonance Imaging* ; Polyvinyl Alcohol ; Radiosurgery ; Tantalum

OBJECTIVE: The purpose of this study was to compare the plasma amitriptyline and nortriptyline level between before and after fluoxetine addition with patients who were currently taking amitriptyline. METHOD: From the inpatient and outpatient unit of Soon Chun Hyang University Hospital, Chunan, fourteen subjects who were taking amitriptyline 25mg more than 1 week at least were given fluoxetine 20mg. Before and 2 weeks after fluoxetine addition the plasma level of amitriptyline and nortriptyline are analyzed simultaneously by High Performance Liquid Chromatography(HPLC) At the same times, HAM-D(Hamilton Rating Scale for Depression) score and the UKU(Uldvalg for Klinske Unders phi gelser) side effect scale were checked. RESULTS: After fluoxetine addition to the patients who were taking amitriptyline, the plasma level of amitriptyline, nortriptyline and sum of amitriptyline and nortriptyline had risen. The mean plasma amitriptyline level increased from 168.9+/-89.4ng/ml to 183.0+/-102.0ng/ml after fluoxetine addition(p=0.011) but the change was not statistically significant. The mean plasma nortriptyline level increased significantly from 114.3+/-70.2ng/ml to 168.0+/-86.2ng/ml after fluoxetine addition(p=0.011) In addition, the mean plasma level of total amitriptyline and nortriptyline increased significantly from 283.1+/-125.3ng/ml to 350.9+/-78.4ng/ml after fluoxetine addition(p=0.016) After fluoxetine addition, no significant change was noted in the UKU side effect scale score. CONCLUSION: As consequence of comparson of plasma amitriptyline and nortriptyline level before and after fluoxetine addition mean amitriptyline, nortriptyline and total plasma level was increased after fluoxetine addition. This suggests that coadministration of amitriptyline and fluoxetine may induce improvement of depressive symptom in depressive patients by way of increased plasma level of amitriptyline.
Amitriptyline* ; Chungcheongnam-do ; Depression ; Fluoxetine* ; Humans ; Inpatients ; Nortriptyline ; Outpatients ; Plasma*