No abstract available.
Cicatrix* ; Herpes Zoster* ; Histiocytoma, Benign Fibrous*

No abstract available.

STATEMENT OF PROBLEM: Among the physical properties of adhesion luting cement, the aspect that requires the most important factor is the degree of solubility and water sorption. Dissolution or an inadequate due to excessive water sorption inside the oral cavity compromises the while concurrently increasing the susceptibility to secondary dental caries. Susceptibility to dissolution and difficulty of removing remnant cement from the gingival sulcus have hindered the use of dental resin cement in the clinical practice, but the improved characteristics of newer generation resin cements have interest in and enabled resin cements to be widely used in adhesion of fixed prosthesis, such as laminate veneers and all-ceramic crowns. PURPOSE: The purpose of this study is to compare and analyze the degrees of solubility and water sorption of a variety of resin cements widely used for clinical purposes with different curing methods. MATERIALS AND METHODS: Self-curing resin cements, Avanto(R), CandB(TM) CEMENT and Superbond CandB cements comprised group 1, 2 and 3. The dual-curing resin cements Panavia(TM) F, Calibra(R) and Variolink(R) II were divided into groups 4, 5, and 6, respectively. The investigation was carried out using disc-shaped specimens as specified by ANSI/ADA Specification No. 27. The degree of water sorption, water solubility and lactic acid solubility of each test group was analyzed statistically leading to the following conclusion. RESULTS: The degree of water sorption was shown to increase in the following order : group 6, 5, 4, 2, 1 and 3. There were significant differences between the water sorption of each group. Results of the degree of water solubility were shown to increase in the following order : group 6, 5, 4, 2, 1 and 3. Statistically significant differences were found between each group, with the exception of groups 1 and 3. Finally, the degree of lactic acid solubility was found to increase in the following order : group 6, 5, 4, 2, 3 and 1. Significant differences were found between each group. In general dual-curing resin cements displayed substantially lower values than self-curing resin cements with regard to water sorption, water solubility, and lactic acid solubility. CONCLUSIONS: From the results of this study, dual-curing resin cements show a significantly lower degree of water sorption and solubility than their self-curing counterparts. Clinically, when selecting resin cements, the product with a lower degree of water sorption and solubility are preferred. The results of this study indicate that the use-of dual-curing resin cements is preferable to self-curing cements.
Crowns ; Dental Caries ; Fibrinogen ; Lactic Acid ; Mouth ; Prostheses and Implants ; Resin Cements* ; Resins, Synthetic ; Solubility* ; Water*

OBJECTIVE: The aim of this study was to determine the optimal loading conditions for pure intrusion of the six maxillary anterior teeth with miniscrews according to alveolar bone loss. METHODS: A three-dimensional finite element model was created for a segment of the six anterior teeth, and the positions of the miniscrews and hooks were varied after setting the alveolar bone loss to 0, 2, or 4 mm. Under 100 g of intrusive force, initial displacement of the individual teeth in three directions and the degree of labial tilting were measured. RESULTS: The degree of labial tilting increased with reduced alveolar bone height under the same load. When a miniscrew was inserted between the two central incisors, the amounts of medial-lateral and anterior-posterior displacement of the central incisor were significantly greater than in the other conditions. When the miniscrews were inserted distally to the canines and an intrusion force was applied distal to the lateral incisors, the degree of labial tilting and the amounts of displacement of the six anterior teeth were the lowest, and the maximum von Mises stress was distributed evenly across all the teeth, regardless of the bone loss. CONCLUSIONS: Initial tooth displacement similar to pure intrusion of the six maxillary anterior teeth was induced when miniscrews were inserted distal to the maxillary canines and an intrusion force was applied distal to the lateral incisors. In this condition, the maximum von Mises stresses were relatively evenly distributed across all the teeth, regardless of the bone loss.
Alveolar Bone Loss* ; Finite Element Analysis* ; Incisor ; Tooth*

OBJECTIVE: The aims of this study were to compare the shear bond strength between orthodontic metal brackets and glazed zirconia using different types of primer before applying resin cement and to determine which primer was more effective. METHODS: Zirconia blocks were milled and embedded in acrylic resin and randomly assigned to one of four groups: nonglazed zirconia with sandblasting and zirconia primer (NZ); glazed zirconia with sandblasting, etching, and zirconia primer (GZ); glazed zirconia with sandblasting, etching, and porcelain primer (GP); and glazed zirconia with sandblasting, etching, zirconia primer, and porcelain primer (GZP). A stainless steel metal bracket was bonded to each target surface with resin cement, and all specimens underwent thermal cycling. The shear bond strength of the specimens was measured by a universal testing machine. A scanning electron microscope, three-dimensional optical surface-profiler, and stereoscopic microscope were used to image the zirconia surfaces. The data were analyzed with one-way analyses of variance and the Fisher exact test. RESULTS: Group GZ showed significantly lower shear bond strength than did the other groups. No statistically significant differences were found among groups NZ, GP, and GZP. All specimens in group GZ showed adhesive failure between the zirconia and resin cement. In groups NZ and GP, bonding failed at the interface between the resin cement and bracket base or showed complex adhesive and cohesive failure. CONCLUSIONS: Porcelain primer is the more appropriate choice for bonding a metal bracket to the surface of a full-contour glazed zirconia crown with resin cement.
Adhesives ; Crowns ; Dental Porcelain* ; Resin Cements ; Stainless Steel

OBJECTIVE: The aim of this study was to investigate whether labial tooth inclination and alveolar bone loss affect the moment per unit of force (M(t)/F) in controlled tipping and consequent stresses on the periodontal ligament (PDL). METHODS: Three-dimensional models (n = 20) of maxillary central incisors were created with different labial inclinations (5°, 10°, 15°, and 20°) and different amounts of alveolar bone loss (0, 2, 4, and 6 mm). The M(t)/F necessary for controlled tipping (M(t)/F(cont)) and the principal stresses on the PDL were calculated for each model separately in a finite element analysis. RESULTS: As labial inclination increased, M(t)/F(cont) and the length of the moment arm decreased. In contrast, increased alveolar bone loss caused increases in M(t)/F(cont) and the length of the moment arm. When M(t)/F was near M(t)/F(cont), increases in M(t)/F caused compressive stresses to move from a predominantly labial apical region to a palatal apical position, and tensile stresses in the labial area moved from a cervical position to a mid-root position. Although controlled tipping was applied to the incisors, increases in alveolar bone loss and labial tooth inclination caused increases in maximum compressive and tensile stresses at the root apices. CONCLUSIONS: Increases in alveolar bone loss and labial tooth inclination caused increases in stresses that might cause root resorption at the root apex, despite the application of controlled tipping to the incisors.
Alveolar Bone Loss* ; Arm ; Finite Element Analysis* ; Incisor* ; Periodontal Ligament ; Root Resorption ; Tooth

BACKGROUND: Women smoker faces increased risk for heart disease, stroke, cancers, and respiratory diseases as well as a number of gender specific risks. Maternal smoking has been linked to harmful effects on their offspring such as increased incidence of premature, stillbirth and sudden infant death syndrome, etc. Recently, the rate of female adolescent smoking in Korea is increasing, and the rate of adult woman is expected to increase. This study is aimed at obtaining basic information about smoking patterns and factors associated with smoking in Korean adult women. METHODS: From May 1995 to April 1999, a self-administered questionnaire was distributed to the female visitors of Health Promotion Center in Seoul National University Hospital. The number of smokers was 492. The control group(984 nonsmokers) was selected by 1:2 age group matched random sampling. Smokers and control group were divided into three age groups-young age(20-39 years), middle age(40-59 years), old age(60 years and over)-and analysed the resalts using SPSS and EpiInfo software. RESULTS: The most frequent amount of cigarette smoking was below 10 cigarettes in all age groups. The duration of smoking was below 10 years in most young and middle age groups. In the old age group the duration of smoking was longer than others. Variables positively associated with smoking included alcohol drinking, being engaged in trade service, being unmarried or divorced or separated or parted for ever, high stress status, dissatisfation of life in young age group. The variable of no exercise was added to them in middle age group. In old age group alcohol drinking, no exercise, no school education were the positive meaningful factors associated with smoking in multivariant logistic regression analysis. CONCLUSIONS: The modifiable variables associated with smoking in Korean adult women included alcohol drinking, high stress status, dissatisfation of life and no exercise.
Adolescent ; Adult* ; Alcohol Drinking ; Divorce ; Education ; Female ; Health Promotion ; Heart Diseases ; Humans ; Incidence ; Korea ; Logistic Models ; Middle Aged ; Seoul ; Single Person ; Smoke* ; Smoking* ; Stillbirth ; Stroke ; Sudden Infant Death ; Tobacco Products ; Surveys and Questionnaires

OBJECTIVE: The aims of this study were to assess the direction and degree of lip-line cant in Korean adult orthodontic patients and to identify the effects of sex and age on changes in the cant severity. METHODS: In this cross-sectional retrospective study, lip-line cant was measured in the frontal photographs of 585 Korean patients (92 men and 493 women) aged 18-48 years. The outcome variables (direction and degree of lip-line cant) were assessed in terms of predictor variables (sex, age, sagittal skeletal relationship, and menton deviation angle). RESULTS: The direction of lip-line cant did not differ according to sex, age, or skeletal classification. Patients had 1.6° of lip-line cant on average before orthodontic treatment. Middle-aged adults displayed a significant trend toward a lower degree of lip-line cant compared to younger adults (p < 0.01). Multiple linear regression analysis showed that the degree of lip-line cant was weakly negatively correlated with age (p < 0.001). CONCLUSIONS: While the direction of lip-line cant did not differ according to the parameters explored here, the degree of cant was correlated with age in adults, independent of menton deviation. Specifically, middle-aged adults tended to display significantly lower degrees of lip-line cant than did younger adults.
Adult* ; Classification ; Cross-Sectional Studies* ; Humans ; Linear Models ; Male ; Retrospective Studies

OBJECTIVE: This retrospective, cross-sectional study aimed to establish reference data for normal crown and root lengths and the root–crown ratios (R/C ratios) for the mature maxillary and mandibular incisors in a Korean population by using cone-beam computed tomography (CBCT). METHODS: We included 672 Korean patients (141 men and 531 women; mean age, 27.2 ± 7.7 years) who underwent CBCT examinations during various dental treatments. Crown and root lengths and the R/C ratios of the maxillary and mandibular incisors were measured using CBCT data, which were analyzed to detect significant differences between demographic factors as well as sagittal and vertical skeletal or occlusal relationships. RESULTS: Teeth of the same type in each half-arch were symmetrical. The mean R/C ratios varied from 1.1 to 1.2 for the maxillary incisors and from 1.3 to 1.4 for the mandibular incisors. Crown and root lengths were greater in men than in women, regardless of tooth type. Root lengths and R/C ratios for the mandibular incisors were significantly greater in patients with skeletal Class II malocclusion or an excessive overjet than in the other patients. The R/C ratios for the mandibular incisors were lower in patients with an open bite than in those with a normal or deep bite. Moreover, the R/C ratios for the mandibular incisors increased with age. CONCLUSIONS: The data obtained in our study can serve as reference values for crown and root lengths and the R/C ratios for the maxillary and mandibular incisors in the Korean population.
Cone-Beam Computed Tomography* ; Cross-Sectional Studies ; Crowns ; Demography ; Female ; Humans ; Incisor* ; Male ; Malocclusion ; Open Bite ; Overbite ; Reference Values ; Retrospective Studies ; Tooth ; Tooth Crown ; Tooth Root

OBJECTIVE: To evaluate differences in skeletal maturity in relation to vertical facial types and to compare differences in the skeletal maturity of the cervical vertebrae and hand-wrist in females. METHODS: This study included 59 females aged 7 to 9 years with skeletal Class I malocclusion. The participants were categorized into three groups (low, normal, and high) according to the mandibular plane angle. Skeletal maturity was measured using skeletal maturity indicators (SMIs) and the Tanner–Whitehouse III (TW3) method on hand-wrist radiographs and by using cervical vertebrae maturation indicators (CVMIs) on lateral cephalometric radiographs. RESULTS: The SMI was higher in the high-angle group than in the low-angle group (p = 0.014). The median TW3 bone age was 11.4 months higher in the high-angle group than in the low-angle group (p = 0.032). There was no significant difference in CVMI among the three groups. Skeletal maturity showed a weakly positive correlation with the mandibular plane angle (SMI, r = 0.391; TW3, r = 0.333; CVMI, r = 0.259). CONCLUSIONS The skeletal maturity of the hand-wrist in females with a high mandibular plane angle was higher than that in females with a low mandibular plane angle. Obtaining additional hand-wrist radiographs may facilitate evaluation of skeletal maturity of females. In females with a high mandibular angle, the time to commence orthodontic treatment may be earlier than that in females with a low mandibular angle.