No abstract available.
Cardiotocography* ; Meconium* ; Pregnancy*

OBJECTIVE: The measurement of liver size can be used for the diagnosis of the fetal growth abnormality (FGR, macrosomia etc.). The purpose of this study was to evaluate a mathematical relationship between the fetal liver size(liver length or volume) and the gestational age in the normal pregnancies. Brief comparisons were also tried on the base of the degree of the correlation between liver length and its volume. METHODS: We collected 54 singleton pregnancies of 20 to 36weeks of gestation for measuring fetal liver length and 57 singleton pregnancies for measuring fetal liver volume. We used Combison 530 utrasonic machine(Kreztechnik AG, Zipf, Austria). RESULTS: There was significant correlation between liver size( length and volume) and gestation age. And the liver volume better correlated with gestational age than liver length(r=0.93 : r=0.78, p<0.0001, p<0.0001). CONCLUSION: Ultrasonic measurement of fetal liver size is a reliable indicator of fetal growth, especially liver volume. Therefore these data may have a potential value for the prediction of abnormal fetal growth(FGR, macrosomia).
Diagnosis ; Fetal Development ; Gestational Age* ; Liver* ; Pregnancy* ; Ultrasonics

OBJECTIVES: To understand the importance of the serum level of Ca-125 among pelvic mass, we performed a study. METHOD: From January to December 1998, we performed the study. Before hysterectomy, we performed a blood sampling to know the serum level of Ca-125, After hysterectomy, we weighed the uterus and measured the thickness of endometrium and other histologic characteristics. RESULTS: We performed my research to 80 peoples. The relation between uterine weight and the serum level of Ca-125 is little, if ever(R2=0.0007), and the relation between the thickness of endometrium and the serum level of Ca-125 is also little, if ever(R2=0.0353). The relation between leiomyoma, the cycle of endometrium and the serum level of Ca-125 were also little, but there was a close relationship between adenomyosis and the serum level of Ca-125. CONCLUSION: There was little relationship between uterine weight and the serum level of Ca-125.
Adenomyosis ; Endometrium ; Female ; Humans ; Hysterectomy* ; Leiomyoma ; Uterus

No abstract available.
Epidemiologic Studies* ; Mumps*

Individuals with Asia type DEL blood group, the RhD-variant that classified as serologically RhD-negative, do not produce anti-D even when exposed to the D-antigen. Therefore, it is considered safe to transfuse RhD-positive blood products to them. However, such transfusions are still rare in medical institutions, with only two cases reported in Korea. Here, we present cases of two additional patients based on our experience. A 60-year-old female patient undergoing extra corporeal membrane oxygenation (ECMO) for myocarditis presented with severe anemia.The patient was serologic RhD-negative. Due to the lack of RhD-negative RBC inventory for emergency transfusion, RhD-positive blood was transfused. After confirming the patient’s RHD genotype as Asia type DEL, the planned RhD-positive blood transfusion was continued. A total of 13 units of RhD-positive RBCs and 26 units of single donor platelets (SDPs) were transfused over 25 days. Throughout this period, all unexpected antibody tests were negative. The second patient, a 50-year-old male diagnosed with myelodysplastic syndrome (MDS), was serologic RhD-negative, and the RHD genotyping confirmed Asia type DEL. During the hospitalization period, a total of 113 units of RhD-positive SDPs and 10 units of fresh frozen plasma (FFP) were transfused over 64 days, and all unexpected antibody tests were negative. These two cases suggest the transfusion of RhD-positive blood products to patients with Asia type DEL is safe.

BACKGROUND: Malnutrition among inflammatory bowel disease (IBD) may arise from factors including inadequate dietary intake, malabsorption, and progression of disease. IBD has been reported an increased prevalence of low bone mass. The aims of the present study were to evaluate the nutritional status and to investigate the correlation between bone mineral density (BMD) and nutrient factors in patients with IBD. METHODS: A total of 41 subjects were classified into normal group (n=21) and malnourished group (n=20) by the subjective global assessment result. We surveyed the dietary habit, nutrient intake, and BMD. RESULTS: Subjects' average age was 36.7 years old, and included 26 ulcerative colitis and 15 Crohn's disease. The serum C-reactive protein (CRP) was significantly higher and serum calcium was significantly lower in the malnourished group. Lower bone density subjects were more in the malnourished group but no significant difference. Intake of energy, protein, carbohydrate, fiber, iron, sodium, potassium, zinc, vitamin B6, vitamin C and folate were significantly lower in the malnourished group. The BMD of malnourished group showed correlation with triceps skin fold thickness (TSF), CRP, dietary calcium, phosphorous, iron, animal iron, zinc and vitamin. CONCLUSIONS: The results suggested that adequate intake of nutrients is important to prevent bone loss and systemic education programs are need for IBD patients.
Animals ; Ascorbic Acid ; Bone Density* ; C-Reactive Protein ; Calcium ; Calcium, Dietary ; Colitis, Ulcerative ; Crohn Disease ; Education ; Folic Acid ; Food Habits ; Humans ; Inflammatory Bowel Diseases* ; Iron ; Malnutrition ; Nutritional Status* ; Potassium ; Prevalence ; Skin ; Sodium ; Vitamin B 6 ; Vitamins ; Zinc

The antihypertensive efficacy and safety of Dilevalol, compared with Nicardipine, were evaluated in mild to moderate hypertensive patients in a randomized crossover study. Following a 3 week placebo washout (phase I), the first crossover (phase II) was initiated with 63 patients randomized to dilevalol and 62 to nicardipine. The 6 weeks of treatment was initiated with 100mg of dilevalol once daily or 40mg of nicardipine (20mg B.I.D.). After 2 weeks, patients not achieving a sitting DBP to < or =90mmHg or a decrease of > or =10mmhg were uptitrated to 200mg Dilevalol once daily or 60mg Nicardipine twice daily. A second three week placebo washout (phase III) followed by a second 6 week active treatment phase (phase IV) during which patients were crossed over to the alternative therapy as during phase II if the sitting DBP again met the entrance criteria. 18 patients were only evaluable for the first washout and treatment period because of early discontinuation or protocol violations. They were included in the safety evaluation. phass II patients treated with Dilevalol (n=63) were mean age of 52.9 years, 49% male and 51% mild hypertensives (< or =105mmHg). Phase ??patients treated with Nicardipine (n=62) were mean age of 51.2 years 55% male and 66% mild hypertensives. Both Dilevalol and Nicardipine significantly and equivalently lowered blood pressure relative to baseline (71% versus 67% normalization). Dilevalol slightly but significantly lowered heart rate (-5 beat/min versus -1 beat/min). Dilevalol significantly increased HDL cholesterol (2.1mg/dl, 4.2%) and decreased total cholesterol (9.6mg/dl, 4.2%) while Nicardipine produced only a small but not significant reduction in total cholesterol (3.2mg/dl, 1.2%). The incidence of adverse effects were lower with Dilevalol than with Nicardipine and especially flushing and ankle edema occurred significantly more often with Nicardipine. in conclusion, dilevalol is equally effective but has a superior safety profile to nicardipine in the treatment of mild to moderate hypertension.
Ankle ; Blood Pressure ; Cholesterol ; Cholesterol, HDL ; Cross-Over Studies ; Edema ; Flushing ; Heart Rate ; Humans ; Hypertension* ; Incidence ; Labetalol* ; Male ; Nicardipine*

PURPOSE: The objective of this study was to evaluate and compare the accuracy of impression body taking by the closed and the open tray impression technique with 3 types of impression tray. Individual tray, metal stock tray and polycarbonate tray were used. MATERIALS AND METHODS: Nine closed tray impressions were taken by individual tray, metal stock tray and polycarbonate stock tray, respectively with polyether impression material. 9 open tray impressions were also acquired by same manner. Precision analysis on the master models was performed by attaching the reference frameworks with alternate single screws and measuring the vertical fit discrepancy of respective analogues in working cast with a stereo microscope. Data were analyzed by 1 way ANOVA and independent t-test. RESULTS: The average fit accuracy of impression bodies was calculated. With the closed tray impression technique, there were significant statistical differences in vertical fit discrepancy according to the types of tray. The individual tray group showed the lowest value and the polycarbonate stock tray group represented the highest. With the open tray impression technique, there was no significant difference in vertical fit discrepancy. Significant statistical difference in vertical fit discrepancy was found between the open and the closed impression technique with the polycarbonate stock tray. CONCLUSION: From the results above, more precise impressions could be acquired by the rigid individual tray compared with the polycarbonate stock tray. It was hard to get consistent accuracy impressions by the closed tray impression technique with polycarbonate stock trays.
Dental Impression Technique ; Polycarboxylate Cement

Purpose: The purpose of this study was to evaluate whether three-dimensional (3D)-printed flexible denture resin has suitable mechanical properties for use as a thermoplastic denture base resin material. Materials and Methods: A total of 96 specimens were prepared using the 3D printed flexible denture resin (Flexible Denture). Specimens were designed in CAD software (Tinkercad) and printed through a digital light-processing 3D printer (Asiga MAX UV). Post-polymerization process was conducted according to air exposure or glycerin immersion at 35°C or 60°C and for 30 or 60 minutes. The maximum flexural strength, elastic modulus, 0.2% offset yield strength, and Vickers hardness of 3D-printed flexible denture resin were assessed.Result: The maximum flexural strength ranged from 64.46±2.03 to 84.25±4.32 MPa, the 0.2% offset yield strength ranged from 35.28±1.05 to 46.13±2.33 MPa, the elastic modulus ranged from 1,764.70±64.66 to 2,179.16±140.01 MPa, and the Vickers hardness ranged from 7.01±0.40 to 11.45±0.69 kg/mm2 . Conclusion Within the limits of the present study, the maximum flexural strength, 0.2% offset yield strength, elastic modulus, and Vickers hardness are sufficient for clinical use under the post-polymerization conditions of 60°C at 60 minutes with or without glycerin precipitation.

Severe cases of mandibular prognathism can be treated with orthodontic therapy or surgical correction, but there are situations where only prosthetic improvement is possible. An understanding of class III patients is needed, including a vertical chewing pattern and the absence of anterior guidance. Additionally, it is relatively easy to increase occlusal vertical dimension to correct the anterior crossbite, but this approach can sometimes lead to unfavorable results, necessitating careful diagnosis and treatment planning. In this case report, oral rehabilitation was conducted in a patient with mandibular prognathism and asymmetry, utilizing implants and fixed dental prosthesis. Through a step-by-step treatment approach, the existing occlusal vertical dimension was maintained, and the final fixed dental prosthesis restoration was completed. Accordingly, it shows functional and aesthetically appropriate results, and reports on the patient’s diagnosis and treatment process.