Objective:This study was based on digital orthodontic diagnosis work flow for indirect bonding transfer tray model design and three-dimensional (3D) printing, and the aim of this paper was to inspect the dimensional accuracyof 3D printed brackets, which is the foundation of the follow up work and hoped that will illuminate the clinical application of the digital orthodontics work flow.Methods: The samples which consisted of 14 cases of patients with malocclusion from Department of Orthodontics Peking University were selected, including 8 cases with tooth extraction and 6 cases without tooth extraction.All the 14 patients were taken intra-oral scan (Trios 3Shape,Denmark)and cone-beam computed tomography (CBCT, NewTom 3G volumetric scanner, Aperio Service,Italy)shooting after periodontal treatment.STL data and DICOM data were obtained from intraoral scans and CBCT images.Data segmentation, registration, fusion, automatic tooth arrangement, virtual positioning of orthodontic appliance and conversion the coordinates of malocclusion model were all done with self-programming software.The data of 3D printing model with brackets on it were output finally and printed out with EDEN260V (Objet Geometries, Israel) to make indirect bonding transfer tray.Digital vernier caliper was used to measure the length and width of upper and lower left brackets and buccal tubes on those 3D models after removal of surrounding supporting material by ultrasonic vibration and water-spray.Intra-examiner reliability was assessed by using intra-class correlation coefficients (ICC), and one-sample T test was used to compare the measurements with the standard dimensional data of the brackets.Results: There were significant differences which range in 0.04-0.17 mm between the 13 items out of the 19 measurement items.Except for the length of the lower left premolars''brackets, mean values of the other items were greater than the test value.Conclusion: Although the measurement results in the width of brackets and the width and length of the buccal tubes obtained experimentally were slightly larger than the test value,this may not reduce the accuracy of indirect bonding procedure in clinic necessarily.Whether the differences which range in 0.04-0.17 mm would actually affect the retention and positioning of brackets needs to be confirmed by further studies.

Objective To explore the association of osteoporosis with blood pressure variability in elderly patients with hypertension complicated by osteoporosis, as well as its mechanisms. Methods A total of 189 elderly patients with hypertension were selected. According to the diagnostic criteria for osteoporosis, the patients were divided into three groups. 24-hour ambulatory blood pressure and IL-6 were detected in all the patients, and then compared among different groups. Results For the three group, there were statistical differences in levels of IL-6 and blood pressure variability (P < 0.05). Blood pressure variability was negatively correlated with BMD (P < 0.05). 3. IL-6 was positively related with blood pressure variability (P < 0.05), but had a negative correlation with BMD (P < 0.01). IL-6 had significant statistical differences among different sexes (P < 0.01). Conclusions Osteoporosis is closely associated with blood pressure variability in the elderly patients. IL-6 and blood pressure variability may play a synergistic role in the process of osteoporosis; and IL-6 may be a risk factor for postmenopausal osteoporosis in women.

A novel biosensor for aflatoxin B1 detecting has been reported. The biosensor electrode for AFB1 detecting was assembled by immobilized aflatoxin-oxidoreductase using open-ended multi-walled carbon nanotubes as matrix. Its linear range was between 0.16?M and 3.2?M. And if the specific anti-aflatoxin B1 antibody and aflatoxin oxidoreductase were both immobilized on the electrode with Multi-Walled carbon nanotubes, the detection limit of the modified electrode could be 16 nM with a 10 times improved sensitivity. The aflatoxin enzyme biosensor assembled this way strode one step forward its practical application.

Aim To explore the effect of shikonin on stemness maintance of glioma stem cells ( GSCs ). Methods After the U87-MG cells were cultured and isolated, the sphere cells were identified by immuno-fluorescent staining. The alteration of stemness of GSCs by shikonin treatment(2 μmol·L - 1 ) for 12 h, 24 h and 48 h was valued by morphological detection using optical microscope and sub-sphere forming assay. Mo-reover, the related markers of stem cells, such as CD133, were detected in shikonin treated GSCs by western blot assay. Protein expression of PI3K, p-PI3K, Akt and p-Akt was detected by western blot af-ter shikonin treatment alone. Furthermore, by combi-nation with insulin-like growth factor-1 ( IGF-1), we observed the alteration of stemness maintance of shiko-nin-treated GSCs. Results The presence of neural stem cell related markers CD133 and nestin proved the characteristics of GSCs. Shikonin treatment significant-ly inhibited the morphology of GSCs and the sub-sphere forming. Besides, the reduced expression of CD133 was detected in shikonin treated GSCs. Though, the expression of PI3K and Akt did not change compared with the control group, the expression of p-PI3K and p-Akt was reduced. Furthermore, the combination of IGF-1 markedly attenuated the inhibitory effect of shikonin on stemness maintance of GSCs. Conclusion The stemness maintance of GSCs can be significantly inhibited by shikonin treatment, in which PI3K/ Akt pathway is involved.

Aged ; Aged, 80 and over ; Humans ; Kidney Diseases ; diagnosis ; etiology ; Male ; Middle Aged ; Nephelometry and Turbidimetry ; Pneumoconiosis ; complications ; Pulmonary Disease, Chronic Obstructive ; complications ; Retinol-Binding Proteins ; urine

Child, Preschool ; Female ; Home Care Services ; Humans ; Infant ; Male ; Positive-Pressure Respiration ; instrumentation ; methods ; Risk Factors ; Sleep Apnea, Obstructive ; prevention & control ; therapy ; Telemedicine ; instrumentation ; methods

Adult ; Female ; Graft vs Host Disease ; diagnosis ; Hepatitis, Autoimmune ; diagnosis ; Humans

OBJECTIVETo evaluate the clinical outcome of accessory navicular fusion for treatment of the painful accessory navicular bone of type II in adults.

METHODSFrom June 2006 to June 2012, a total of 38 feet (in 35 adult patients) with painful accessory navicular with type I underwent an fusion operation of the primary and accessory navicular bones,including 26 males and 9 females with a mean age of (32.4±7.3) years old ranging from 18 to 44 years old. The course of disease ranged from 3 to 10 months. The perioperative complications and radiological outcomes were observed and recorded. The foot function before and after operation were assessed by the American Orthopedic Foot and Ankle Society (AOFAS) midfoot score, and the easement of the pain was evaluated by visual analog score (VAS).

RESULTSTwo patients had transient superficial inflammation of the incision, no obvious perioperative complications occurred. All patients were follow-up for (53.5±14.7) months (12 to 84 months). Bone union was confirmed on plain radiography in 32 cases (35 feet). The mean time from the operation to union was (13.7±2.3) weeks (9 to 18 weeks). Postoperative pain VAS score was improved obviosly than preoperative (V=12.14,P< 0.01). The talar-to-first metatarsal angle [(9.4±3.5)° vs (8.3±2.7)°, t=0.736, P>0.05)], calcaneal tilt angle [(17.7±2.2)° vs (18.9±3.4)°, t=0.794, P>0.05],talonavicular uncoverage angle [(14.3±3.4)° vs(12.5?4.6)°,t=0.947, P>0.05) ],and height of the first tarsometatarsal joint [(14.8±3.1) mm vs (15.9±2.8) mm,t=0.814,P>0.05)] before and after operations had no statistic difference. The AOFAS midfoot score was improced from preoperative 45.6±5.3 to postoperative 82.5±7.4 (t=3.214,P< 0.01).

CONCLUSIONFor the painful accessory navicular bone of type II in adults, if the patient has a large navicular bone and not complicated with rigid flatfoot, once the conservative treatment fails, fusion of the primary and accessory naviculars may be a successful intervention. Overall, the procedure provides reliable pain relief, definite foot function improvement, and good patient satisfaction.

Adolescent ; Adult ; Female ; Follow-Up Studies ; Foot Diseases ; physiopathology ; surgery ; Humans ; Male ; Tarsal Bones ; abnormalities ; physiopathology ; surgery ; Treatment Outcome ; Young Adult

To explore the effect of different processing methods and conditions of coumarin and volatile compounds in Angelica Dahuricae Radix and their change regularity, in order to optimize and establish appropriate drying methods and conditions. After being cleaned, fresh Angelica Dahuricae Radix herbs were baked, sun-dried, shade-dried, sun-dried after sulfur-fumigation, dried by quick-lime embedding, freeze-dried, microwave-dried. Finally, 24 groups of samples were obtained after being mashed and passing through the 60-mesh screen. The HPLC-PDA method was adopted to simultaneously determine the content of coumarin compounds. The GC-MS method was used to determine the content of volatile compounds. The principal component analysis (PCA) was made on the standardized analysis results for the 24 groups of samples processed with different drying methods. According to the PCA results, the comprehensive scores of coumarin and volatile compounds in Angelica Dahuricae Radix herbs processed with different methods in the order from high to low were that unpeeled and dried by quicklime embedding > unpeeled and dried with hot-air at 100 degrees C > unpeeled and dried with hot-air at 40 degrees C > peeled and infrared-dried > peeled and dried with hot-air at 60 degrees C > peeled and dried with hot-air at 40 degrees C > peeled and sun-dried > peeled and dried with hot-air at 60 degrees C > peeled and dried with hot-air at 100 degrees C > peeled and microwave-dried > peeled and dried with hot-air at 80 degrees C > unpeeled and sun-dried > unpeeled and dried with sulfur-fumigation > peeled and dried with sulfur-fumigation > unpeeled and dried with hot-air at 120 degrees C > unpeeled and freeze-dried > unpeeled and infrared-dried > peeled and dried with hot-air at 120 degrees C > peeled and freeze-dried > peeled and dried by quicklime embedding > unpeeled and dried with hot-air at 80 degrees C > peeled and shade-dried > unpeeled and shade-dried > unpeeled and microwave-dried. According to the findings, different drying processing methods have certain impacts on the content coumarin and volatile compounds in Angelica Dahuricae Radix herbs. The traditional method of drying by quicklime embedding is recommended as the optimum origin processing method of Angelica Dahuricae Radix, which is followed by the method for being peeled and dried with hot-air at 100 degrees C.
Angelica ; chemistry ; Coumarins ; analysis ; Desiccation ; methods ; Gas Chromatography-Mass Spectrometry ; Hot Temperature ; Principal Component Analysis ; Volatile Organic Compounds ; analysis

In order to make sure whether Panax notoginseng is sensitive to chloridion and guide fertilization in planting of P. notoginseng, the effects of the different proportion of potassium chloride (KCl) and potassium sulfate (K2SO4) on the yield, quality of P. notoginseng were studied. The results showed that K fertilizer significantly improved the growth of P. notoginseng and increased the biomass per plant or per pot and the content of N, P, K and the content of saponin. In cases of conditions such as potassium, and the effects of K2SO4 on increasing the petiole length, leaf size, rhizome length, root length, and content and accumulation of Ginsenoside Rg1 were better than those of KCl. While compared with K2SO4, KCl was more conducive to augmenting height, root width, the biomass of shoot, rhizome, root and the content of Ginsenoside Rb1 and Rd. There was not remarkable difference in agronomic characters, biomass and the content of N, P, K among KCl, K2SO4 and the combination of KCl and K2SO4. However, the content of saponin of the treatment with combination of KCl and K2SO4 was significant higher than that of single KCl or K2SO4 treatments. K fertilizer significantly increased yield and the content of saponins. And P. notoginseng was not sensitive to chloridion. KCl increased the yield and the content of saponins of P. notoginseng as well as K2SO4, and the combination treatment was superior to single treatment. It is recommended that the KCl should be adopted in production, to reduce the cost of potash fertilizer.
Agriculture ; Fertilizers ; analysis ; Panax notoginseng ; chemistry ; growth & development ; Potassium Chloride ; analysis ; metabolism ; Quality Control ; Soil ; chemistry ; Sulfates ; analysis ; metabolism