Aim To establish an ideal hyperlipidemia animal model by a new way.Methods 30 mice were randomly divided into control group, positive control group and model group.The mice of control group were only fed with a standard diet.Those of positive control group were fed with high fat diet.Those of model group were fed with a standard diet and enough milk.After 30 days the TG, TC, HDL-C and LDL-C of serum and hepatic and LI were detected and pathological changes in the liver of mice were observed microscopically.Results Compared with the control group, the mice of model group developed hyperlipidemia with LI and the serum and the hepatic TG, TC, LDL-C elevated significantly, while HDL-C were significantly lower.The histopathological research showed hepatocellular macrovesicular steatosis and hepatitis in the model group.Conclusion An ideal model of hyperlipidemia is successfully established with standard diet and milk fed to mice for 30 days.

OBJECTIVE:To explore the regulating effect of pravastatin on hyperlipidemia and hypertension in patients with coronary heart disease.METHODS:80 patients with coronary heart disease were randomly divided into 2 groups,pravastatin treatment group(pravastatin,20 mg,qd,n=42)and placebo control group(placebo,qd,n=38).The course of treatment was 4 weeks in both groups,serum total cholesterol(TC),triglycerides(TG),high density lipoprotein cholesterol(HDL-C)were assayed,and systolic blood pressure(SBP)as well as diastolic blood pressure(DBP)were measured before and after 4 weeks of treatment.RESULTS:There was a significant decrease of serum TC and TG levels,as well as DBP in treatment group after treatment,as compared with control group,while HDL-C level increased significantly(P

BACKGROUND: A superior composite scaffold hopes be constructed to resolve adhesion between seed cell and scaffoldmaterial.OBJECTIVE: To construct composite scaffolds with fibrin glue and xenogeneic inorganic bone and to explore the three-dimensional culture of rabbit marrow stromal cells (MSCs).DESIGN, TIME AND SETTING: Observational experiment was performed at the Department of Orthopedics of China-Japan Union Hospital and the Department of Mechanical Engineering, College of Mechanical Engineering of Jilin University from November 2007 to March 2008.MATERIALS: Fibrin glue was made by a certain ratio of fibrinogen and thrombin; bovine cancellous bone following defatting and deproteinization was mixed with fibrin glue to establish composite scaffold.METHODS: Rabbit MSCs were cultured in v#ro and transferred, and the MSCs were collected for three-dimensional culture withcombined scaffolds made of xenogeneic inorganic bone and fibrin glue.MAIN OUTCOME MEASURES: The growth and proliferation of MSCs were examined by phase-contrast microscope andtransmission electron microscopy.RESULTS: Phase contrast microscope showed that the MSCs could spread evenly in the combined scaffolds. After cultured 4 weeks, the MSCs formed into densely three-dimensional net. It could be observed under the transmission electron microscopethat there were micro-protrusions in local stromal cells at 4 weeks after culture, and the mitochondrion as well as ribosomes wasobserved in the cytoplasm with rough endoplasmic reticulum.CONCLUSION: The MSCs cultured in the combination of fibrin glue and xenogeneic inorganic bone scaffolds show a betteractivity, and they can proliferate rapidly.

0.05).(2)In 67 cases with pre-and post-image selection and reconstruction in single-slice or twin-slice helical CT,the slice concordance rate in measurement was 20.98% and 97.01%,respectively(?2=80.22,P=0.00).The slice concordance was all accomplished with the same method in multi-slice helical CT in 5 cases.(3)Peak heights and SPN-to-aorta ratios of malignant [(38.48?14.32)HU,(19.64?9.52)% ] and inflammatory SPN [(42.48?11.55)HU,(21.14?7.77)%] were significantly higher than that of benign SPN [(9.52?3.78)HU,(3.41?1.86)%,P0.05).Slice optimization of dynamic contrast-enhanced CT scan improved the diagnostic accuracy of SPN from 78% to 80%.Conclusion No significant efficacy was found in the attenuation between primitive images and reconstructive images with the same slice thickness of homogenous material.Slice concordance of dynamic contrast enhanced spiral CT could reflect objectively the morphological appearance and CT value changes of solitary pulmonary nodules,and may improve the veracity of diagnosis.

BACKGROUND: Skidproof wrist protection devices can well protect the waist.OBJECTIVE: To analyze the efficacy of wrist protectors against fracture using three-dimensional finite element analysis.METHODS: Based on original data of Mechanical Virtual Human of China, three-dimensional finite element models of wrist with normal soft tissues and wrist wearing protectors were established using Abaqus6.51 software. The model was subjected to loading of 2 m/s. Stress-strain distribution of finite element model of the wrist before and after protectors wearing was compared, and maximum stress variation with time in the distal ulna was analyzed.RESULTS AND CONCLUSION: Compared with wrist not wearing protectors, the equivalent stress at soft tissues of hypothenar eminence, dorsal wrist, inferior segment of the radioulna, and distal radioulna was significantly decreased, which the stress at the second and fourth metacarpal bone, proximal segment of the index finger, and hamate bone was significantly increased, indicating the wrist protector can disperse, or transfer some stress from the distal radius and ulna to the wrist, palm or digital bone, thereby playing a positive role in preventing dital radial and ulnar fractures.

Objective To evaluate the features of carotid atherosclerotic plaques on ultrasonographic elastography. Methods A total of 45 atherosclerotie plaques of the carotid artery in 33 patients were found with routine ultrasonography, all the 45 atherosclerotic plaques were divided into soft plaque, fibrous plaque, mixed plaque and calcified plaque. The elastograms of the plaques were oberseved and the strain contrast(stiffness ratio) of blood tissue in common carotid artery to plaques were calculated. Results Seventeen soft plaques, 15 mixed plaques and 13 calcified plaques were founded using routine ultrasonography, but 0 fibrous plaques were founded. The soft plaques were shown in green, the mixed plaques were showen as mosaic of green and blue and the calcified plaques were showen in blue by ultrasonographic elastography. The strain contrast in patients with calcified plaques and mixed plaques were significantly higher when compared with the soft plaques group(P 0. 001, P <0.05). The strain contrast in patients with calcified plaques was significantly higher than the mixed plaques group (P < 0.001). Conclusions Ultrasonographie elastography could be used in carotid arteries atherosclerotic plaques. Various of acoustic characteristics plaques has different elastography and strain contrast.

Objective:To simulate the urinary tract environment in vitro and observe the local thermal effects generated by the holmium laser when it is continuously emitting under different mode settings, working medium and perfusion speed.Methods:This study was conducted from March to December 2019. Static medium model: Under normal pressure, 25℃ constant temperature and 50% humidity, a glass test tube with an inner diameter of 1cm and working medium of 1ml was placed into a beaker containing 300ml of 37℃ constant temperature water, and a 550 μm laser fiber was placed in the working medium in the test tube. The laser was continuously emitting for 60.0 seconds, and the temperature of the water in the test tube was continuously recorded using a temperature measuring instrument. The laser working mode was set as dusting, fragmenting, and "popcorn" mode, the energy was set at 10-20 W, and the working medium was normal saline, distilled water, and 5% mannitol solution. Flow medium model: In the same environment, the same optical fiber and temperature probe were placed in a 6mm flush tube, and the laser was continuously fired and continuously perfused with saline. The flushing speed was controlled between 100 ml/h and 1 200 ml/h, and the water temperature change during laser emission was recorded. The real-time temperature changes around the fiber tip with different modes, different media, and different perfusion rates were analyzed.Results:Static medium model: After the holmium laser was continuously fired for about 6.0±1.2 seconds, it exceeded the safe temperature of 43℃ , reached the plateau temperature in about 27.6±2.1 seconds and drop to the safe temperature after stopping excitation for 38.2±2.4 seconds. The plateau temperature dusting group > "popcorn" group > fragmenting group ( P<0.01), of which the dusting group(78.67±0.45)℃ (20 W) was the highest and the fragmenting group (55.67±0.22)℃ (10 W) was the lowest. The temperature of 5% mannitol solution (73.92 ± 0.44) ℃ was the lowest among the three experimental working media, which was (75.57±0.14)℃ of distilled water group and (78.67±0.45)℃ of normal saline group (0.4 J×50 Hz, 20 W). Flow medium model: The perfusion rate of 800ml/h can ensure that the continuous emitting of the holmium laser remains at a safe temperature (40.96±0.36)℃. It only took 7.0±1.0 seconds to decrease to the initial temperature after stopping emittion. Conclusions:Under the same total power, the high-energy-low-frequency fragmenting lithotripsy mode has a relatively lower thermal effect. Under the same total power, the thermal effect of holmium laser emittion is relatively lower in the environment of 5% mannitol solution. Perfusion of ≥800ml/h can effectively reduce the local high temperature caused by the thermal effect of holmium laser.

Objective: To investigate the preliminary screening results of Alzheimer's disease (AD) among the elderly in Ningbo City, Zhejiang Province and analyze the influencing factors, so as to provide insights into prevention and control of AD in the elderly. Methods: A multi-stage stratified proportional sampling method was used to select the registered residents aged 60 years and older in Ningbo City as subjects. Demographic characteristics, lifestyle factors, physical conditions and social activities of the subjects was evaluated with questionnaires. AD was screened using the Mini-Mental State Examination (MMSE), and factors affecting the positive rate of AD preliminary screening were identified using a multivariable logistic regression model. Results: A total of 34 027 elderly residents were investigated, with an mean age of (71.71±6.89) years. There were 15 115 males (44.42%) and 18 912 females (55.58%), 16 146 residents living in rural areas (47.45%) and 17 881 residents living in urban areas (52.55%). The positive rate of AD preliminary screening was 7.28% (2 476 cases). Multivariable logistic regression analysis showed that age (70 to 74 years, OR=1.357; 75 to 79 years, OR=1.807; 80 to 84 years, OR=2.782; 85 years and older, OR=4.907), gender (female, OR=1.118), residence (urban areas, OR=0.713), marital status (unmarried, OR=3.078; widowed/separated/divorced, OR=1.301), educational level (primary school, OR=0.629; junior high school and above, OR=0.609), occupation before retirement (others, OR=0.741), family genetic history (no, OR=0.651), household disposable monthly income (1 000 to 1 999 Yuan, OR=0.636; 2 000 to 2 999 Yuan, OR=0.569; 3 000 Yuan and above, OR=0.448), exercise (seldom, OR=0.855; regular, OR=0.780), number of chronic diseases (2~5, OR=1.328), hearing loss (no, OR=0.764), smell loss (no, OR=0.615), chronic constipation (no, OR=0.696), major negative life events (no, OR=0.804), subjective memory loss (no, OR=0.583), sleep quality (general, OR=0.640; good, OR=0.616), living style (living with spouse, OR=0.300; living alone, OR=0.315; living with children, OR=0.350) and social activities (2-3 times/week, OR=0.584; 4 times/week and more, OR=0.409) were factors affecting the positive rate of AD preliminary screening. Conclusions The positive rate of AD preliminary screening among the elderly in Ningbo City is relatively high. Age, gender, economic conditions, exercise, social activities and physical conditions were factors affecting the positive rate of AD preliminary screening.

OBJECTIVE: To analyze the characteristics of vestibular migraine (VM), in order to understand the auditory and vestibular function. METHOD: One hundred cases of confirmed or suspected VM patients were observed. Routine examination including pure tone test, vestibular dual temperature test and vestibular evoked myogenic potential(VEMP) and video head impulse test(v-HIT) Were conducted. RESULT: The incidence of male and female was about 1.00 : 2. 57. The average age of onset was 47 years, of which the youngest was 19 years old, and the oldest was 74 years old. Ninty-three cases of patients presented with vestibular sensitive performance, including photophobia, phonophobia,or motion sensitive. Fourty-two patients had migraine at the onset of the disease. Thirty-four patients had cochiear symptoms, including tinnitus, ear fullness, or epicophosis. In seventeen cases of fatigue, tension or poor sleep can cause vertigo. Nine patients had low blood pressure, 7 patients presented with hypertension. Two cases of vertigo were closely related to the change of position, and 1 case had visual aura. In the experiment, 94 patients had undergone VEMP test,with 44 cases of abnormal VEMP value. Seventy-nine patients had been examined v-HIT,of whom 2 patients were abnormal (both of which were reduced). Pure tone audiometry was abnormal in 35 cases. Five cases of patients showed abnormal vestibular-double temperature test. CONCLUSION Vestibular migraine is more prone to female, with young middle age, and can be accompanied by cochlear symptoms. Vestibular function tests (low frequency and high frequency) are normal.
Adult ; Aged ; Audiometry, Pure-Tone ; Evoked Potentials ; Female ; Head Impulse Test ; Humans ; Male ; Middle Aged ; Migraine Disorders ; diagnosis ; Vestibular Function Tests ; Vestibule, Labyrinth ; physiopathology ; Young Adult

BACKGROUND:Condylar fracture can occur under direct and indirect forces, and however, its risk and correlation with the impact site are rarely reported. OBJECTIVE:To quickly establish normal mandible three-dimensional finite element model and to analyze the strain conditions of the condyle under force at different parts of the mandible. METHODS: An adolescent volunteer was examined by multilayer spiral CT scans, whose mandible was normal and oral cavity was healthy. We used the reverse engineering software Mimics and large finite element software MSC.Patran to establish the three-dimensional finite element model of the mandible and to verify the feasibility of the model in the impact test at the body of the mandible, chin, mandibular angle and condyle. RESULTS AND CONCLUSION:A rapid establishment of mandible dimensional finite element biomechanical model could reproduce the morphology of the mandible, which was able to obtain the overal visual impression of the mandibular condyle. Geometric model included 80 044 nodes and 18 441 units. The mandibular chin, one side of the body, mandibular angle and condyle were given 100 N force respectively. The maximum equivalent stress of the bone cortex appeared in condylar region. So the mandibular condylar fractures were at the greatest risk. Experimental results contribute to mechanicaly analyze the condylar fracture type and to judge the severity of fractures.