OBJECTIVE To know about the perception and current status of drug risk management among pharmacists in Chinese medical institutions， providing insights and recommendations for enhancing the drug risk management system in medical institutions. METHODS A questionnaire survey was conducted across 28 provinces， cities， and autonomous regions； stratified radom sampling was employed to study the population of medical workers and pharmaceutical professionals in medical institutions nationwide. The survey included information on the survey population， the current status of drug risk management implementation in medical institutions， the cognition， definition and process of drug risk management related concepts， and the content and mode of drug risk management work in medical institutions. Finally， suggestions were collected from various medical institutions on the system construction of drug risk management. Descriptive statistical analysis was adopted to summarize the obtained data. RESULTS A total of 446 questionnaires were collected in this survey， including 420 valid questionnaires and 26 invalid questionnaires. The questionnaire collection rate was 100%，and the effective rate was 94.17%. 51.19% of the respondents No.2020YFC2009001）。 based their understanding of drug risk management on Management Measures for Adverse Drug Reaction Reports and Monitoring， while 87.38% recognized the need for drug risk management throughout the drug use process. 63.33% of the participants stated that their medical institutions had dedicated positions related to drug risk management， with the highest proportion （72.17%） was in third-grade class A medical institutions. 66.43% reported implementing risk management across all drug use stages. Suggestions for the development of drug risk management systems in medical institutions by the research participants focused on enhancing guiding documents， clarifying concepts， establishing information-sharing mechanisms. CONCLUSIONS The overall awareness of drug risk management in China’s medical institutions is high， with practices in place across various stages in multiple forms. However， there remains a need to strengthen institutional documents， management regulations， system development， and information-sharing mechanisms to improve collaborative governance， improve drug management levels， and ensure patient safety.

BACKGROUND:Cervical disc herniation can cause pain in the neck and shoulder area,as well as radiating pain in the upper limbs.The incidence rate is increasing year by year and tends to affect younger individuals.Fully understanding the biomechanical characteristics of the cervical spine in adolescents is of great significance for preventing and delaying the onset of cervical disc herniation in this age group. OBJECTIVE:To reconstruct cervical spine models for both healthy adolescents and adolescent patients with cervical disc herniation utilizing finite element analysis techniques,to analyze the motion range of the C1-T1 cervical vertebrae as well as the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and the cartilage of the small joints. METHODS:A normal adolescent's cervical spine and an adolescent patient with cervical disc herniation were selected in this study.The continuous scan cervical spine CT raw image data were imported into Mimics 21.0 in DICOM format.The C1-T1 vertebrae were reconstructed separately.Subsequently,the established models were imported into the 3-Matic software for disc reconstruction.The perfected models were then imported into Hypermesh software for meshing of the vertebrae,nucleus pulposus,annulus fibrosus,and ligaments,creating valid geometric models.After assigning material properties,the final models were imported into ABAQUS software to observe the joint motion range of the C1-C7 cervical vertebrae segments under different conditions,and to analyze the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and small joint cartilage of each cervical spine segment. RESULTS AND CONCLUSION:(1)In six different conditions,the joint motion range of the C1 vertebra in the cervical spine models of both normal adolescent and adolescent patient with cervical disc herniation was higher than that of the other vertebrae.Additionally,the joint motion range of each cervical spine segment in normal adolescent was greater than that in adolescent patient with cervical disc herniation.(2)In the cervical spine model of normal adolescent,the maximum stress values in the annulus fibrosus and nucleus pulposus were found on the left side during C2-3 flexion conditions(0.43 MPa and 0.17 MPa,respectively).In the cervical spine model of adolescent patient with cervical disc herniation,the maximum stress values were found on the left side during C7-T1 flexion conditions(0.54 MPa and 0.18 MPa,respectively).(3)In the cervical spine model of normal adolescent,the maximum stress value on the endplate was found on the left side of the upper endplate of C3 during flexion conditions(1.46 MPa).In the model of adolescent patient with cervical disc herniation,the maximum stress value on the endplate was found on the left side of the lower endplate of C7 during flexion conditions(1.32 MPa).(4)In the cervical spine model of normal adolescent,the maximum stress value in the small joint cartilage was found in the C2-3 left rotation conditions(0.98 MPa).In adolescent patient with cervical disc herniation,the stress in the small joint cartilage significantly increased under different conditions,especially in C1-2,with the maximum stress found during left flexion(3.50 MPa).(5)It is concluded that compared to normal adolescent,adolescent patient with cervical disc herniation exhibits altered cervical curvature and a decrease in overall joint motion range in the cervical spine.In adolescent with cervical disc herniation,there is a significant increase in stress on the annulus fibrosus,nucleus pulposus,and endplates in the C7-T1 segment.The stress on the left articular cartilage of the C1-2 is notable.Abnormal cervical curvature may be the primary factor causing these stress changes.

Hepatocellular carcinoma(HCC), the third leading cause of cancer-related death worldwide, is characterized by high mortality and recurrence rates. Common treatments include hepatectomy, liver transplantation, ablation therapy, interventional therapy, radiotherapy, systemic therapy, and traditional Chinese medicine(TCM). While exhibiting specific advantages, these approaches are associated with varying degrees of adverse effects. To alleviate patients' suffering and burdens, it is crucial to explore additional treatments and elucidate the pathogenesis of HCC, laying a foundation for the development of new TCM-based drugs. With emerging research on gut microbiota, it has been revealed that microbiota plays a vital role in the development of HCC by influencing intestinal barrier function, microbial metabolites, and immune regulation. TCM, with its multi-component, multi-target, and multi-pathway characteristics, has been increasingly recognized as a vital therapeutic treatment for HCC, particularly in patients at intermediate or advanced stages, by prolonging survival and improving quality of life. Recent global studies demonstrate that TCM exerts anti-HCC effects by modulating gut microbiota, restoring intestinal barrier function, regulating microbial composition and its metabolites, suppressing inflammation, and enhancing immune responses, thereby inhibiting the malignant phenotype of HCC. This review aims to elucidate the mechanisms by which gut microbiota contributes to the development and progression of HCC and highlight the regulatory effects of TCM, addressing the current gap in systematic understanding of the "TCM-gut microbiota-HCC" axis. The findings provide theoretical support for integrating TCM with western medicine in HCC treatment and promote the transition from basic research to precision clinical therapy through microbiota-targeted drug development and TCM-based interventions.
Humans ; Gastrointestinal Microbiome/drug effects* ; Carcinoma, Hepatocellular/microbiology* ; Liver Neoplasms/microbiology* ; Drugs, Chinese Herbal/administration & dosage* ; Animals ; Medicine, Chinese Traditional

OBJECTIVE: To explore the application value and clinical effect of 3D printing combined with customized bone plate in the treatment of acetabular fracture. METHODS: From June 2020 to June 2022, 11 patients with acetabular fractures underwent preoperative planning using 3D printing technology and were treated with customized bone plates including 8 males and 3 females, aged 25 to 66 years old. The fractures were classified according to Letournel-Judet:4 posterior wall fractures, 2 T-type fractures, 2 transverse posterior wall fractures, 2 double column fractures, and 1 anterior column with posterior semi-transverse fractures. The operative time, intraoperative blood loss, intraoperative fluoroscopy times, postoperative drainage volume, postoperative fracture healing time, and hip function score were recorded and analyzed. RESULTS: The operation time of 11 patients was 80 to 150 min, intraoperative blood volume was 150 to 700 ml, fluoroscopy frequency was 2 to 6, postoperative drainage flow was 60 to 195 ml, and the fracture healing time was 2.5 to 6.0 months. Fracture reduction was evaluated according to Matta score:anatomical reduction in 3 cases and satisfactory reduction in 8 cases. Eleven patients were followed up for 7 to 18 months. The hip Merle d'Aubigne function scores were excellent in 6 cases, good in 3 cases, fair in 1 case and poor in 1 case. Incision fat liquefaction occurred in 1 case and obturator nerve traction in 1 case. CONCLUSION The application of 3D printing technology combined with customized bone plates in the treatment of acetabular fracture is effective. In addition, the printed model can provide the operator with the results of the three-dimensional shape of the fracture, which is convenient for surgical reduction and effectively improves the efficiency of surgery.
Humans ; Female ; Male ; Middle Aged ; Acetabulum/surgery* ; Printing, Three-Dimensional ; Adult ; Aged ; Bone Plates ; Fractures, Bone/surgery* ; Fracture Fixation, Internal/methods*

OBJECTIVES: To investigate the molecular epidemiology of children with phenylketonuria (PKU) in Gansu, China, providing foundational data for intervention strategies. METHODS: A retrospective analysis was conducted on 1 159 PKU families who attended Gansu Provincial Maternity and Child Care Hospital from January 2012 to December 2024. Sanger sequencing, multiplex ligation-dependent probe amplification, whole exome sequencing, and deep intronic variant analysis were used to analyze the PAH gene. RESULTS: For the 1 159 children with PKU, 2 295 variants were identified in 2 318 alleles, resulting in a detection rate of 99.01%. The detection rates were 100% (914/914) in 457 classic PKU families, 99.45% (907/912) in 456 mild PKU families, and 96.34% (474/492) in 246 mild hyperphenylalaninemia families. The 2 295 variants detected comprised 208 distinct mutation types, among which c.728G>A (14.95%, 343/2 295) had the highest frequency, followed by c.611A>G (4.88%, 112/2 295) and c.721C>T (4.79%, 110/2 295). The cumulative frequency of the top 23 hotspot variants reached 70.28% (1 613/2 295), and most variant alleles were detected in exon 7 (29.19%, 670/2 295). CONCLUSIONS Deep intronic variant analysis of the PAH gene can improve the genetic diagnostic rate of PKU. The development of targeted detection kits for PAH hotspot variants may enable precision screening programs and enhance preventive strategies for PKU.
Humans ; Phenylketonurias/epidemiology* ; Female ; Male ; Retrospective Studies ; Phenylalanine Hydroxylase/genetics* ; Mutation ; Child, Preschool ; China/epidemiology* ; Child ; Infant

OBJECTIVE: To assess health equity in the Yangtze River region to improve understanding of the correlation between hand, foot, and mouth disease (HFMD) and socioeconomic factors. METHODS: From 2014-2016, data on HFMD incidence, population statistics, economic indicators, and meteorology from 26 cities along the Yangtze River were analyzed. A multi-city random-effects meta-analysis was performed to study the relationship between temperature and HFMD transmission, and health equity was assessed with respect to socio-economic impact. RESULTS: Over the study period, 919,458 HFMD cases were reported, with Shanghai (162,303) having the highest incidence and Tongling (5,513) having the lowest. Males were more commonly affected (male-to-female ratio, 1.49:1). The exposure-response relationship had an M-shaped curve, with two HFMD peaks occurring at 4 °C and 26 °C. The relative risk had two peaks at 1.30 °C (1.834, 95% CI: 1.204-2.794) and 31.4 °C (1.143, 95% CI: 0.901-1.451), forming an M shape, with the first peak higher than the second. The most significant impact of temperature on HFMD was observed between -2 °C and 18.1 °C. The concentration index (0.2463) indicated moderate concentration differences, whereas the Theil index (0.0418) showed low inequality in distribution. CONCLUSION The incidence of HFMD varied across cities, particularly with changes in temperature. Economically prosperous areas showed higher risks, indicating disparities. Targeted interventions in these areas are crucial for mitigating the risk of HFMD.
Female ; Humans ; Male ; China/epidemiology* ; Cities/epidemiology* ; Hand, Foot and Mouth Disease/transmission* ; Incidence ; Risk Factors ; Temperature

OBJECTIVE: To investigate the spatiotemporal patterns and socioeconomic factors influencing the incidence of tuberculosis (TB) in the Guangdong Province between 2010 and 2019. METHOD: Spatial and temporal variations in TB incidence were mapped using heat maps and hierarchical clustering. Socioenvironmental influencing factors were evaluated using a Bayesian spatiotemporal conditional autoregressive (ST-CAR) model. RESULTS: Annual incidence of TB in Guangdong decreased from 91.85/100,000 in 2010 to 53.06/100,000 in 2019. Spatial hotspots were found in northeastern Guangdong, particularly in Heyuan, Shanwei, and Shantou, while Shenzhen, Dongguan, and Foshan had the lowest rates in the Pearl River Delta. The ST-CAR model showed that the TB risk was lower with higher per capita Gross Domestic Product (GDP) [Relative Risk ( RR), 0.91; 95% Confidence Interval ( CI): 0.86-0.98], more the ratio of licensed physicians and physician ( RR, 0.94; 95% CI: 0.90-0.98), and higher per capita public expenditure ( RR, 0.94; 95% CI: 0.90-0.97), with a marginal effect of population density ( RR, 0.86; 95% CI: 0.86-1.00). CONCLUSION The incidence of TB in Guangdong varies spatially and temporally. Areas with poor economic conditions and insufficient healthcare resources are at an increased risk of TB infection. Strategies focusing on equitable health resource distribution and economic development are the key to TB control.
Humans ; China/epidemiology* ; Incidence ; Bayes Theorem ; Spatio-Temporal Analysis ; Tuberculosis/epidemiology* ; Socioeconomic Factors

Objective This paper aims to investigate the application of intraoral scanning and cone beam computed tomography(CBCT)registration implant robot in dental implant surgery.Methods The data of 40 cases with dental de-fect of robot-assisted implantation from November 2023 to May 2024 were retrospectively analyzed.Before the opera-tion,the intraoral scan data and CBCT data of the posi-tioning markers were automatically fused with the initial CBCT images,and the registration error was calculated.The average registration error of positioning markers was determined during the operation,and the implantation ac-curacy was analyzed after the operation.Results The intraoral scan data and CBCT data of 40 patients with dental defect wearing positioning markers were successfully registered with the initial CBCT image,and the registration errors were(0.157±0.026)mm and(0.154±0.033)mm,respectively.Statistical analysis showed no statistical significance between them.The registration errors of the marker was(0.037 3±0.003 6)mm.A total of 55 implants were performed,and the total deviations of the implant point and the apical point were(0.78±0.41)and(0.89±0.28)mm,respectively.The transverse deviations of the implant point and the apical point were(0.44±0.36)and(0.58±0.25)mm,respectively.The depth deviations of the implant point and the apical point were(0.51±0.32)and(0.54±0.36)mm,respectively.The devia-tion of the implant angle was 1.24°±0.67°.Conclusion The fusion technology based on intraoral scanning and CBCT registration can meet the accuracy requirements of preoperative registration of oral implant robots.The technology in-creases the choice of registration methods before robot-assisted dental implant surgery and reduces the multiple radiation exposuresof the patient.

Purpose::To identify the risk factors for training-related lower extremity muscle injuries in young males by a non-invasive method of body composition analysis.Methods::A total of 282 healthy young male volunteers aged 18 -20 years participated in this cohort study. Injury location, degree, and injury rate were adjusted by a questionnaire based on the overuse injury assessment methods used in epidemiological studies of sports injuries. The occurrence of training injuries is monitored and diagnosed by physicians and treated accordingly. The body composition was measured using the BodyStat QuadScan 4000 multifrequency Bio-impedance system at 5, 50, 100 and 200 kHz to obtain 4 impedance values. The Shapiro-Wilk test was used to check whether the data conformed to a normal distribution. Data of normal distribution were shown as mean ± SD and analyzed by t-test, while those of non-normal distribution were shown as median (Q 1, Q 3) and analyzed by Wilcoxon rank sum test. The receiver operator characteristic curve and logistic regression analysis were performed to investigate risk factors for developing training-related lower extremity injuries and accuracy. Results::Among the 282 subjects, 78 (27.7%) developed training injuries. Lower extremity training injuries revealed the highest incidence, accounting for 23.4% (66 cases). These patients showed higher percentages of lean body mass ( p = 0.001), total body water (TBW, p=0.006), extracellular water ( p=0.020) and intracellular water ( p=0.010) as well as a larger ratio of basal metabolic rate/total weight ( p=0.006), compared with those without lower extremity muscle injuries. On the contrary, the percentage of body fat ( p=0.001) and body fat mass index ( p=0.002) were lower. Logistic regression analysis showed that TBW percentage > 65.35% ( p=0.050, odds ratio =3.114) and 3rd space water > 0.95% ( p=0.045, odds ratio =2.342) were independent risk factors for lower extremity muscle injuries. Conclusion::TBW percentage and 3rd space water measured with bio-impedance method are potential risk factors for predicting the incidence of lower extremity muscle injuries in young males following training.

In recent years, nucleic acid therapy, as a revolutionary therapeutic tool, has shown great potential in the treatment of genetic diseases, infectious diseases and cancer. Lipid nanoparticles (LNPs) are currently the most advanced mRNA delivery carriers, and their emergence is an important reason for the rapid approval and use of COVID-19 mRNA vaccines and the development of mRNA therapy. Currently, mRNA therapeutics using LNP as a carrier have been widely used in protein replacement therapy, vaccines and gene editing. Conventional LNP is composed of four components: ionizable lipids, phospholipids, cholesterol, and polyethylene glycol (PEG) lipids, which can effectively load mRNA to improve the stability of mRNA and promote the delivery of mRNA to the cytoplasm. However, in the face of the complexity and diversity of clinical diseases, the structure, properties and functions of existing LNPs are too homogeneous, and the lack of targeted delivery capability may result in the risk of off-targeting. LNPs are flexibly designed and structurally stable vectors, and the adjustment of the types or proportions of their components can give them additional functions without affecting the ability of LNPs to deliver mRNAs. For example, by replacing and optimizing the basic components of LNP, introducing a fifth component, and modifying its surface, LNP can be made to have more precise targeting ability to reduce the side effects caused by treatment, or be given additional functions to synergistically enhance the efficacy of mRNA therapy to respond to the clinical demand for nucleic acid therapy. It is also possible to further improve the efficiency of LNP delivery of mRNA through machine learning-assisted LNP iteration. This review can provide a reference method for the rational design of engineered lipid nanoparticles delivering mRNA to treat diseases.