BACKGROUND:The degradation of a col agen Ⅰ modified porous calcium sulfate scaffold in vivo is unclear, and its degradation product effects on human osteoblasts are rarely reported.
OBJECTIVE:To observe the biocompatibility of human osteoblasts with degradation products of calcium sulfate/col agen membrane composite porous scaffold.
METHODS:Passage 2 human osteoblasts were cultured in the extract of degradation products of calcium sulfate/col agen membrane composite porous scaffold and in Dulbecco’s modified Eagle’s medium containing 10%newborn calf serum. At days 1, 3, 5, 7, cellproliferative curves and total protein were determined using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide method and Coomassie bril iant blue micro-plate method, respectively. And alkaline phosphatase activity was also detected.
RESULTS AND CONCLUSION:The proliferation rate of human osteoblasts in the extract of degradation products of calcium sulfate/col agen membrane composite porous scaffold was slightly higher than that in the Dulbecco’s modified Eagle’s medium containing 10%newborn calf serum, but there was no significant difference (P>0.05). Alkaline phosphatase activity, total protein synthesis and alkaline phosphatase/total protein were increased with time in the two groups, but there was no significant difference at different time (P>0.05). These findings indicate that the degradation products of calcium sulfate/col agen membrane composite porous scaffold cannot influence proliferation and growth of human osteoblasts as wel as their normal physiological functions, which have good biocompatibility.

Objective:To investigate the masticatory function and the expression of monocyte chemoattractant protein-1 (MCP-1) and tumor necrosis factor-α(TNF-α) in gingival crevicular fluid.Methods:The clinical data of 98 patients with dentition loss admitted to Tongxiang First People′s Hospital from June 2017 to June 2019 were analyzed, and 49 cases were treated with oral implant repair(observation group) and 49 cases were treated with conventional repair(control group). Both groups were followed up for 6 months. The masticatory function, speech function, retention function, quality of life and the changes of MCP-1 and TNF-α in gingival crevicular fluid were compared before treatment and 6 months after treatment.Results:The total effective rate of the observation group was higher than that of the control group: 95.92%(47/49) vs. 79.59%(39/49), and the difference was statistically significant ( χ2=6.078, P<0.05). At 6 months after treatment, the scores of masticatory function, speech function and retention function in the observation group were higher than those in the control group ( P<0.05). The scores of emotional function, social function and physiological function in the observation group were higher than those in the control group ( P<0.05). The levels of MCP-1 and TNF-α in gingival crevicular fluid of the observation group were lower than those of the control group: (32.09 ± 7.65) μg/L vs. (43.62 ± 9.23) μg/L, (2.19 ± 0.38) μg/L vs. (3.20 ± 0.51) μg/L, and the differences were statistically significant ( P<0.05). Conclusions:Dental implant repair is effective for patients with dentition loss, and it can improve masticatory function and quality of life, and reduce the expression of MCP-1 and TNF-α in gingival crevicular fluid.

BACKGROUND: Anterior cervical decompression and bone graft fusion is always the standard operation type for the treatment of cervical spondylotic radiculopathy and myelopathy. However, secondary degeneration and new symptoms caused by the stress increase of adjacent segments following anterior cervical spinal fusion have been paid more and more attention. Artificial cervical disc replacement provides a new choice for the treatment of cervical syndrome.OBJECTIVE: To observe the therapeutic effect of BRYAN& artificial cervical disc displacement for the treatment of cervical spondylotic radiculopathy and myelopathy.DESIGN: Self-control experiment.SETTING: Department of Orthopaedics, Sixth Hospital of Ningbo.PARTICIPANTS: Seventeen patients with cervical spondylotic radiculopathy and/or myelopathy admitted to the Department of Orthopaedics, Sixth Hospital of Ningbo were involved between December 2003 and February 2005 were involved in the study. Informed consents were obtained, and all participates were approved by Medical Ethics Committee.There were 9 patients with cervical spondylotic myelopathy, and 8 patients with cervical spondylotic radiculopathy.BRYAN& artificial cervical disc system is an artificial cervical intervertebral disc with composite structure. It is constructed by two titanium alloy end plates and polymer core, which can bear loading and took polyisocyanate as matrix.METHODS: BRYAN& artificial cervical disc system was used in the treatment. All the patients underwent single-segment displacement. Two patients underwent the displacement at C3-4, five at C4-5, 8 at C5-6 and 2 at C6-7. At postoperative 1, 3and 6 months, X-ray lateral position, anteflexion position, posterior extension position, the left and right side dynamic position plains were taken to investigate prosthetic stability. Neurologic function was evaluated according to Japanese Orthopaedic Association (JOA) scoring system.MAIN OUTCOME MEASURES: ① Investigating whether or not prosthesis displaced by means of dynamic position plains.② Investigating the recovery of neurologic function by JOA scoring system.RESULTS: ①JOA average scores were elevated to 15 from preoperative 8.5. Nervous system symptoms had improved to different extents, and the mean improvement rate was 75%. At postoperative 1,3 and 6 months, all the patients were followed up and their X-ray plains of cervical lateral position and flexion-extension position showed good stability,indicating that motor function was not lost obviously. No heterotopic ossification was found around the prothesis. ②Wound infection was not found in any patient. At postoperative 3 months, less than 2 mm slight displacement appeared in the prothesis in one patient, and there were no obvious symptoms. Prothesis abrasion, subsidence, bone bridge formation and other rejections were not found in the other prothesis. Prothesis had good biocompatibility, and could be examined by routine CT and MRI.CONCLUSION: Artificial cervical disc replacement can obviously improve the symptoms of patients, and has good therapeutic effects in the treatment of cervical syndrome.

BACKGROUND:In the treatment of tibial plateau fractures, because of the variety of fracture, the complexity of anatomical changes, X-ray films or three-dimensional CT scan limited by two-dimensional plane, increases the difficulty in preoperative plan and surgical treatment. The application of three-dimensional (3D) printing technology has attracted attention in the department of orthopedics. OBJECTIVE:To explore the auxiliary role of 3D printing technique in preoperative plan and treatment for tibial plateau fractures. METHODS:Thirty patients with tibial plateau comminuted fractures were enroled in this study and divided into two groups: experimental and control groups, with 15 patients in each group. In the experimental group, patients underwent 3D CT scan, which was stored in DICOM format, and processed by Mimics software. Data were converted into STL format, entered 3D printer, and a 1:1 entity size of the fracture model was made, in accordance with repair plan of 3D fracture model. Operation time and intraoperative blood loss were compared between the two groups. At 12 months after treatment, their outcomes were assessed using Rasmussen evaluation criteria. RESULTS AND CONCLUSION: The 3D printing fracture models of 1:1 ratio identified fracture type and made a repair program before surgery in the experimental group. Operation time and intraoperative blood loss were significantly less in the experimental group than in the control group (P < 0.05). After surgery, patients were folowed up for 12 to 18 months. The healing time was 3-5 months, averagely 4.3 months. At 12 months after treatment, the Rasmussen evaluation criteria results showed that the excelent and good rate was significantly higher in the experimental group than in the control group (P < 0.05). These results suggest that the fracture model of 3D can help to make the operation plan. The treatment of tibial plateau fractures is more precise, personalized and visual.

BACKGROUND:The safety and efficacy of simultaneous bilateral total knee replacement or selective unilateral total knee arthroplasty in patients with severe osteoarthritis of the knees are stil controversial. OBJECTIVE:To compare safety and clinical efficacy of patients with osteoarthritis knees after simultaneous bilateral total knee replacement or selective unilateral total knee replacement. METHODS:Total y 60 cases with severe osteoarthritis of the knees (90 knees) undergoing total knee replacement were divided into unilateral total knee replacement group (n=30, 30 knees), and the simultaneous bilateral total knee replacement group (n=30, 60 knees). RESULTS AND CONCLUSION:There was no significant difference in the incidence of other complications such as infection, mortality, pulmonary embolism in patients of both groups (P>0.05). The incidence of cardiovascular complications, postoperative blood loss and blood transfusion were higher in the bilateral knee group than in the unilateral knee group (P<0.05). During fol ow-up at 1 year after replacement, no significant differences in range of motion, muscle strength of quadriceps and hospital for special surgery knee score were detected in patients of both groups (P>0.05). However, Visual Analogue Scale scores were significantly lower in the bilateral knee group than in the unilateral group (P<0.05). These data indicated that the risk of cardiovascular complications was high in patients receiving bilateral total knee replacement. Patients with severe cardiovascular disease should avoid simultaneous bilateral total knee arthroplasty.

In this study, the formulation and preparation process of curcumin nanocrystalline injection were optimized to improve curcumin dissolution rate and bioavailability in vivo.Media grinding method was used to prepare curcumin nanocrystals, and the particle size was used as the evaluation index.The Box-Behnken experimental design was used to optimize its formulation and preparation process, and to characterize its physical and chemical properties.In addition, the dissolution of nanocrystal with different particle sizes was investigated by the paddle method, and the pharmacokinetics in rats were studied.The experimental results showed that the optimal formula and process were obtained through Box-Behnken experimental design, and that uniform curcumin nanocrystals with an average particle size of 223.1 nm were obtained.The results of X-ray diffraction and differential scanning calorimetry analysis showed that the crystal form was stable during the preparation of nanocrystals. In vitro dissolution experiments with different particle sizes showed that the dissolution rate and the degree of dissolution would increase if the particle size was smaller.Pharmacokinetic studies in rats showed that cmax and AUC0-∞ of curcumin nanocrystal injection were 4.9 and 4.1 times that of curcumin raw materials, respectively.In summary, the curcumin nanocrystal injection developed in this research have a stable preparation process and can significantly improve the dissolution rate and bioavailability of the drug, which provides some ideas for the research on curcumin preparation.

Objective:To explore the early coagulation function changes of penetrating intestinal firearm injury of pig in high-altitude environments.Methods:Twenty healthy long white piglets were selected and divided into the plain group and the high-altitude group using the random number table method, with 10 pigs in each group. Pigs in the plain group were placed in a plain environment at an altitude of 800 meters, while pigs in the high-altitude group were placed in an experimental chamber simulating an altitude of 6 000 meters for 48 hours. Both groups received pistol gunshot to have firearm penetrating wounds to the abdominal intestinal tract and then returned to the plain observation room. At 0, 2, 4, 8, 12 and 24 hours after injury, coagulation in the peripheral blood and fibrinolytic indexes [prothrombin time (PT), activated partial thromboplastin time (APTT), thrombin time (TT), fibrinogen (Fbg), D-dimer (D-D), and fibrinogen degradation product (FDP)], thromboelastogram (TEG) [reaction time (R), clotting time (K), clot formation rate (α), maximum amplitude (MA) and coagulation composite index (CI) ], platelet parameters [platelet count (PLT), mean platelet volume (MPV), platelet distribution width (PDW), and platelet-large cell ratio (P-LCR)] in the two groups were detected separately.Results:The PT values at 0 and 2 hours after injury in the high-altitude group were significantly lower than those in the plain group, while they were significantly higher at 8, 12 and 24 hours than those in the plain group ( P<0.01); there was no significant difference at 4 hours between the two groups ( P>0.05). The APTT values at 0, 2 and 4 hours after injury in the high-altitude group were significantly lower than those in the plain group, while they were significantly higher at 8, 12 and 24 hours after injury than those in the plain group ( P<0.01). The TT values at 0, 2 and 4 hours after the injury in the high-altitude group were significantly lower than those in the plain group, while they were significantly higher at 12 and 24 hours after injury than those in the plain group ( P<0.01); there was no significant difference at 8 hours after injury between the two groups ( P>0.05). The Fbg, D-D and FDP values at 0, 2, 4, 8, 12 and 24 hours after injury were higher in the high-altitude group than those in the plain group ( P<0.01). The R values at 0, 2 and 4 hours after injury in the high-altitude group were significantly lower than those in the plain group, while they were significantly higher at 8, 12 and 24 hours after injury than those in the plain group ( P<0.01). The K values at 0, 2, 4 and 8 hours after injury in the high-altitude group were significantly lower than those in the plain group, while they were significantly higher at 12 and 24 hours after injury than those in the plain group ( P<0.05 or 0.01). The α angles at 0, 2 and 4 hours after injury in the high-altitude group were significantly higher than those in the plain group, while they were significantly lower at 8, 12 and 24 hours after injury than those in the plain group ( P<0.01). The MA values at 0, 2 and 4 hours after the injury in the high-altitude group were significantly higher than those in the plain group, while they were significantly lower at 8, 12 and 24 hours after injury than those in the plain group ( P<0.01). The CI values at 0, 2 and 4 hours after injury in the high-altitude group were significantly higher than those in the plain group, while they were significantly lower at 8, 12 and 24 hours after injury than those in the plain group ( P<0.01). The PLT values at 0, 2, 4 and 8 hours after injury in the high-altitude group were significantly higher than those in the plain group, while they were significantly lower at 12 and 24 hours after injury than those in the plain group ( P<0.05 or 0.01). The MPV values at 0, 2, 4, 8, 12 and 24 hours after injury in the high-altitude group were significantly higher than those in the plain group ( P<0.01). The PDW values at 2, 4, 8, 12 and 24 hours after injury in the high-altitude group were significantly higher than those in the plain group ( P<0.05 or 0.01), while there was no significant difference in PDW at 0 hour after injury between the two groups ( P>0.05). The P-LCR values at 0, 2, 4, 8, 12 and 24 hours after injury in the high-altitude group were all significantly higher than those in the plain group ( P<0.01). Conclusion:Compared with the plain environments, pig intestinal firearm penetrating injury in the high-altitude environments is more prone to early hypercoagulable state accompanied by mild hyperfibrinolysis, and faster to reach a hypocoagulable state accompanied by obvious hyperfibrinolysis.

Objective To investigate the clinical manifestations and genetic features of children with papillorenal syndrome caused by PAX2 gene mutation.Methods Clinical manifestations,imaging changes and sequencing data were collected and analyzed from a family with papillorenal syndrome who were diagnosed in Wuhan Children's Hospital in February 2018."PAX2","papillorenal syndrome" and "renal coloboma syndrome" were used as key words to search in China National Knowledge Infrastructure,Wangfang Data Knowledge Service Platform,PubMed and Human Gene Mutation Database up to April 2018.Results A ten years old girl was admitted due to "edema and urine output decreased for one week".Lab showed BUN 25.30 mmol/L,Scr 766.5 μmol/L,Urine protein 3.6 g/24 h.Imaging examination showed bilateral vesical and ureter reflux combined with left duplex kidney and duplication of ureter.Developmental dysplasia of the left hip was also found.The father of the patient had been diagnosed with chronic kidney disease for 10 years and on hemodialysis for 6 years.Next generation sequencing revealed that both the father and daughter carried a heterozygous nonsense mutation in the exon3 c.219C ＞ G(p.Y73X) of PAX2.No Chinese literature ever was reported about papillorenal syndrome.Ninety-four articles in English were retrieved and 177 patients with papillorenal syndrome were confirmed by gene analysis with a total of 92 PAX2 variants.Ten nonsense mutations had been reported.Developmental dysplasia of the hip (DDH) never be reported before.Conclusion Papillorenal syndrome caused by PAX2 mutation can mainly manifest as abnormal development of both kidney and optic nerve,which may be accompanied by other systemic abnormalities,it is rarely reported in China.DDH may be a new phenotype of papillorenal syndrome.

Objective: To observe the efficacy and safety between Pegfilgrastim (PEG-rhG-CSF) and Recombinant human granulocyte colony stimulating factor (rhG-CSF) in hematological malignancy after allogeneic hematopoietic stem cell transplantation (allo-HSCT) . Methods: 157 patients after allo-HSCT were enrolled in this study from June 2015 to November 2016. Two agents of G-CSF were used to stimulate hematopoietic recovery after transplantation. There were 65 cases in PEG-rhG-CSF and 92 cases in rhG-CSF groups. Patients in PEG-rhG-CSF group were given a single subcutaneous dose of 6 mg on the first day and +8 d, while cases in rhG-CSF group were given in dose of 5 μg·kg^-1·d^-1 by subcutaneous injection from +1 d continuing to neutrophils more than 1.5×10⁹/L, and then the indicators and survival rates in two groups after transplantation were compared. Results: ①There were no significant differences of the neutrophil implantation time[13.5 (8-12) d vs 13 (9-24) d, P=0.393] and platelet implantation time [14 (9-160) d vs 14 (9-92) d, P=0.094] between PEG-rhG-CSF and rhG-CSF groups respectively. There were no significant differences in terms of neutropenia period (P=0.435) , number of cases who got fever during neutropenia (P=0.622) , and the median time of fever in neutropenia period (P=0.460) , respectively between the two groups. There were no significant differences of erythrocyte and platelet transfusions (P=0.074, P=0.059) within 1 month after transplantation. ②There were no significant differences with regard to the incidences of acute GVHD[23.1% (15/65) vs 34.8% (32/92) , P=0.115], chronic GVHD[20.0% (13/65) vs 32.6% (32/92) , P=0.081], Ⅱ-Ⅳdegree of acute GVHD[30.0% (13/65) vs 30.4% (30/92) , P=0.287] and extensive chronic GVHD[9.2% (6/65) vs 20.7% (19/92) , P=0.135] between PEG-rhG-CSF and rhG-CSF groups. ③There were no significant differences in terms of disease free survival (DFS) (62.5% vs 61.4%, P=0.478) and overall survival (OS) (67.4% vs 67.3%, P=0.718) between PEG-rhG-CSF and rhG-CSF groups. ④There was no significant difference of the non-relapse mortality (NRM) between PEG-rhG-CSF and rhG-CSF groups[20.5% (95%CI 11.4%-37.0%) vs 32.6% (95%CI 22.2%-47.9%) , P=0.141]. The relapse rate was not statistically significant[14.9% (95%CI 7.4%-29.8%) vs 10.0% (95%CI 5.0%-20.0%) , P=0.299]. Conclusion Compared with rhG-CSF, PEG-rhG-CSF could reduce the times of injection. There were no differences in terms of hematopoietic recovery, the incidence of GVHD, relapse rate, DFS and OS rates after allo-HSCT between two groups.

BACKGROUND:In implant restoration in the aesthetic area,zirconium dioxide is gradually becoming the most commonly used upper restorative material and has achieved better clinical results.Resin-ceramic composite,a new type of dental restorative material,begins to try to be used as an upper restorative material in implant restoration,but there is less research on the application of this material in implant restoration. OBJECTIVE:To compare the biomechanical differences between resin ceramic crowns and zirconia all-ceramic crown implant restorations in three occlusal relationships for restoring maxillary central incisors. METHODS:The cone-beam CT image data of a patient with single-crown implant restoration of maxillary central incisor were selected,and the maxillary bone model was extracted by using Mimics 21.0 software,and the model was imported into Solidworks 2020 software.The crown,adhesive,abutment,central screw,and implant were modeled,and the model of single-crown implant restoration of maxillary central incisor was assembled.After giving the model material property parameters(resin-ceramic composite and zirconia for the upper restoration materials)in ANSYS Workbench 2021 R1 software,three occlusal relationships(edge-to-edge occlusion,normal overjet and deep overbite)were simulated and loaded to analyze the stress distribution of the resin-ceramic crown and zirconia all-ceramic crown implant restoration models. RESULTS AND CONCLUSION:(1)The stress concentration areas in the implant restoration models of the resin-ceramic crown group and the zirconia all-ceramic crown group in different occlusal relationships were distributed in the upper restoration loading point,the abutment-implant connection,the implant neck and the surrounding bone tissue.As the occlusal relationship changed from the edge-to-edge to normal and deep overbite,the peak equivalent forces of the restorative abutment,central screw,implant,and bone tissue in both the resin-ceramic and zirconia all-ceramic crown groups gradually decreased.The highest peak equivalent forces were observed for the upper restorations in deep overbite.The zirconia all-ceramic crown group had the highest peak equivalent force in the adhesive layer in the edge-to-edge relationship,and the resin-ceramic crown group had the highest peak equivalent force in the adhesive layer in the deep overbite.(2)In the edge-to-edge occlusion,the peak equivalent force of the adhesive layer and central screw in the resin-ceramic crown group was slightly smaller than that in the zirconia all-ceramic crown group,and there was no significant difference between the two groups in the peak equivalent force at the upper restoration,restoration abutment,implant,and bone tissue.The peak stresses in the upper restoration,adhesive layer,and central screw of the resin-ceramic crown group were slightly less than those of the zirconia all-ceramic crown group at normal fit,and there were no significant differences between the two groups in the peak equivalent forces at the restoration abutment,implant,and bone tissue.In deep overbite,the peak adhesive,abutment,and central screw stresses were greater in the resin-ceramic crown group than in the zirconia all-ceramic crown group,with no significant differences in the upper restorations,implants,or bone tissue.(3)The results showed that the upper restorative material had no significant effect on the stress distribution of the implant and bone tissue,and had some effects on the stress distribution of the upper restoration,adhesive,restoration abutment,and central screw,but the difference was not significant.The occlusal relationship has a significant influence on the stress distribution in all structures and bone tissue of the implant restoration.The resin-ceramic crowns have a buffering effect on the stresses in the case of edge-to-edge and normal occlusion.