Objective To observe the anatomy status of the anterior clinoid process (ACP)and the anterior clinoid segment of in-ternal carotid artery (ICA)respectively by multisliced computed tomography (MSCT),and to provide useful imaging information for ACP removal surgery.Methods A total of 100 patients (200 sides)had volume rendering reconstruction of skull.Cranium was removed along cranio-orbital bone in simulation.Then the anatomical structures of the ACP and its surrounding were observed in cephalad direction.The total length,medium length,basic width,medium width of the ACP and the sagittal view curve length of anterior clinoid segment of the ICA from both sides were measured.Results Total length of left ACP was (9.82±2.48)mm,basal width was (9.47±1.88)mm,medium length was (5.03±1.55)mm,medium width was (6.1 9 ±1.75)mm;for right side total length was (10.41±2.1 6)mm,basal width was (9.66 ±2.21)mm,medium length was (5.86 ±2.48)mm,medium width was (6.66±1.5 1)mm.Left anterior clinoid segment of ICA curve length was (6.74±2.25)mm;right was (8.54±3.00)mm.Paired sample t test showed no significant difference in total length,basal width and medium width of ACP in both sides (P >0.05);while the difference in medium length and curve length of the anterior clinoid segment of ICA were statistically significant respectively (P <0.05).Conclusion MSCT can clearly display the vivisection and variation status of the ACP and the anterior clinoid segment of the ICA and can provide useful imaging information for removal of ACP in operation.

Purpose To study the exposure extent of internal carotid artery siphon (ICAS) before and after removing anterior clinoid process (ACP) using multislice spiral CT (MSCT) simulation, and to improve the tumor resection rate and ensure the operation effect. Materials and Methods MSCT three-dimensional images reconstruction simulating supraorbital keyhole approach of 100 patients (200 sides) were observed, the distance between the crotch of anterior cerebral artery and middle cerebral artery and ICAS before and after removing ACP (exposure extent) was measured. Results In 100 patients (200 sides ACP), the exposure extent before and after removing ACP were (14.3±3.9) mm and (30.5±4.2) mm, respectively on the left side with statistical difference (t=45.278, P<0.001), and were (15.9±3.8) mm and (31.8±3.9) mm, respectively on the right side with statistical difference (t=40.513, P<0.001). The exposure extent increased (16.3±3.6) mm and (15.8±3.9) mm, respectively on the left and right side with no statistical difference (t=0.251, P>0.05). Conclusion MSCT simulating supraorbital keyhole approach in removing ACP can effectively increase the exposure length of ICA, and enlarge the exposure extent of sella region, thus provide reliable imaging information for removing tumor and selecting surgical project in this region.

Objective Hepatic artery (HA) reconstruction is one challenging procedure in pediatric liver transplantation (PLT).Here we review the first 115 microsurgical reconstructions of HA in PLT performed by a single surgeon,aiming to demonstrate the learning curve and the problems encountered.Methods From July 2016 to January 2017,a series of 115 microsurgical reconstructions of HA in PLT for end-stage liver disease were finished by one single surgeon with 4-year liver surgery experience and 2-week microsurgical training.HA reconstruction was performed with an operating microscope (Carl-Zeiss S88).Reconstruction was completed with interrupted sutures with 8-0 or 9-0 Prolene using the double clip for fixation.The blood flow was examined by Doppler scan daily after PLTs in first week and then once in 2nd week and first month for patency.A total of 143 artery anastomoses were performed in 115 PLTs.The age ranged from 3 months to 9 years.Indications for PLT included biliary atresia (105/115),Alagille syndrome (5/115),PFIC (3/115),Caroli disease (1/115),methylmalonicacidemia (1/115) and glycogen storage disease (1/115).Most of the PLTs were living donor liver transplantation (107/115),along with OLT (5/115) and split LT (3/115).Results The diameter of the arteries was mostly less than 2 mm (98/115).Up to date,one HA thrombosis (HAT) occurred at D8 after LT and 4 cases suspected as temporal HA stenosis (HAS) around 2 weeks after LT,which manifested as low velocity (<20 cm/s) and resistance index (<0.50) by Doppler.The HAT case failed in emergent re-anastomosis,but had a spontaneous recanalization at 3 weeks and is now in good condition without biliary problem.All the HAS children recovered to normal flows at first month.All children with HA complications started warfarin upon detection,with a targeted INR between 1.5-2.0.There were 6 deaths in this series including 5 cases of infections and 1 case of graft failure.Learning curve suggested a two phases growth (first 44 cases practicing phase vs.next 71 cases mature phase),which can be attributed to experience accumulation in terms of precise of manipulation,choice of inflow arteries for better match and stronger pulsation,avoidance of length redundant,prevention of kink.All the HAT and HASs happened in practicing phase while outcomes were excellent in mature phase.Moreover,time for each anastomosis was significantly shortened in second phase from 45-70 min to 30-55 min.Conclusion Microsurgical technique is highly safe in pediatric HA reconstruction,especially for very tiny arteries.It is possible to achieve low risk of complications for a new surgeon with adequate experience in liver surgery and microsurgical training.However,more surveillance and timing anticoagulation therapy is required before the mature of microsurgical technique.

Objective To evaluate the ergotropic effect of bone cement on pedicle screw fixation in treatment of osteopo-rotic thoracolumbar fracture.Methods Fifty-three patients with osteoporotic thoracolumbar fracture, admitted from Jun. 2013 to Dec. 2014, were included for treatment by augmentation of pedicle screw fixation with bone cement. All patients underwent pre-operative examination of bone mineral density with T-score ≤-2.5 and augmentation of pedicle screw fixation with injection of 1.5 ml bone cement in adjacent to fractured vertebra. All patients were treated with anti-osteoporosis therapy pre- and post-operation, ob-served and recorded with basic conditions and complications. At pre-operation, one-week post-operation and last follow-up, pain vi-sual analogue scale (VAS) and neurological function score (ASIA) of all patients were recorded, and the compression rats of anterior and posterior edge of fractured vertebra, and compression rats of spinal canal and Cobb angel of all patients were measured.Results All the 53 patients were successfully undergone operation in about 90-140 min with blood loss of about 150-350 ml. No spinal cord or nerve injury, dural tear and obvious leakage of bone cement and screw loosening occurred during operation. All patients were followed up for 12 to 36 months and the neurological function obviously recovered contrasted with pre-operation. X-ray and CT examination at last follow-up showed good fractures healing, good position and non-loosening of internal fixation device and non-leakage of bone cement. At one week post-operation and last follow-up, VAS, compression rats of anterior edge and posterior edge of fractured vertebra, compression rats of spinal canal and Cobb angel were significantly lower than those at pre-operation (P<0.05), but no significant differences existed on these parameters between 1 week post-operation and last follow-up (P>0.05).Conclusions Augmentation of pedicle screw fixation with bone cement can effectively strengthen the initial stability of pedicle screw in osteo-porosis, restore the height of fractured vertebra and reduce the compression of spinal canal, which will help the correction of spinal kyphosis and neurological function recovery. This method can well maintain long-term stability of internal fixation in osteoporosis and height of fractured vertebra, and significantly reduce the risks of long-term screw loosening and vertebral collapse.

Objective To identify departments involved, and the appraisal and compensation of such disputes in Beijing, for preventive recommendations. Methods A retrospective descriptive statistical analysis was carried out to retrieve and extract keywords from the first-instance judgments totaling 445 cases of medical damage liability disputes from 2014 to 2016 in Beijing. This analysis covered the age, disease, departments involved, liability judgment among other information. These cases were published at the website of China judgment documents. Results Patients with musculoskeletal connective tissue diseases, circulatory system disease and tumor accounted for the most lawsuits. The departments involved with more disputes were the department of gynecology and obstetrics (80/445, 18. 0％), orthopedics (69/445, 15. 5％), and emergency department(45/445, 10. 1％). 83. 8 percent of the disputes were found with medical quality problems;and 84. 3％ were lost with compensations. Conclusions It is imperative to elevate the diagnosis and treatment level on musculoskeletal connective tissue diseases, circulatory system disease and tumors, and take precautions against disputes at such key departments as gynecology and obstetrics department, orthopedics department, and emergency department. Other precautions include normalized medical record writing, medical risk disclosure, higher medical quality and patient safety.

The purpose of this study was to assess the factors affecting caudal screw loosening after spinopelvic fixation for adult patients with spinal deformity. This meta-analysis calculated the weighted mean difference (WMD) and odds ratio (OR) using Review Manager ver. 5.3 (RevMan; Cochrane, London, UK). The loosening group was older than the control group (WMD, 2.17; 95% confidence interval [CI], 0.48–3.87; p=0.01). The S2 alar-iliac (S2AI) could prevent the caudal screw from loosening (OR, 0.43; 95% CI, 0.20–0.94; p=0.03). However, gender distribution (p=0.36), the number of fusion segments (p=0.24), rod breakage (p=0.97), T-score (p=0.10), and proximal junctional kyphosis (p=0.75) demonstrated no difference. Preoperatively, only pelvic incidence (PI) in the loosening group was higher (WMD, 5.08; 95% CI, 2.71–7.45; p<0.01), while thoracic kyphosis (p=0.09), lumbar lordosis (LL) (p=0.69), pelvic tilt (PT) (p=0.31), pelvic incidence minus lumbar lordosis (PI–LL) (p=0.35), sagittal vertical axis (SVA) (p=0.27), and T1 pelvic angle (TPA) demonstrated no difference (p=0.10). PI–LL (WMD, 6.05; 95% CI, 0.96–11.14; p=0.02), PT (WMD, 4.12; 95% CI, 0.99–7.26; p=0.01), TPA (WMD, 4.72; 95% CI, 2.35–7.09; p<0.01), and SVA (WMD, 13.35; 95% CI, 2.83–3.87; p=0.001) were higher in the screw loosening group immediately postoperatively. However, TK (p=0.24) and LL (p=0.44) demonstrated no difference. TPA (WMD, 8.38; 95% CI, 3.30–13.47; p<0.01), PT (WMD, 6.01; 95% CI, 1.47–10.55; p=0.01), and SVA (WMD, 23.13; 95% CI, 12.06–34.21; p<0.01) were higher in the screw loosening group at the final follow-up. However, PI–LL (p=0.17) demonstrated no significant difference. Elderly individuals were more susceptible to the caudal screw loosening, and the S2AI screw might better reduce the caudal screw loosening rate than the iliac screws. The lumbar lordosis and sagittal alignment should be reconstructed properly to prevent the caudal screw from loosening. Measures to block sagittal alignment deterioration could also prevent the caudal screw from loosening.

Nano-cryopreservation may become a new way in the next generation of cryopreservation technology. However, research using nanoparticles in oocytes vitrification has not been reported in the literature. In this study, HA nanoparticles with different diameters were added into cryoprotectant and M II-stage porcine oocytes were vitrified by Cryotop. The results showed that nanoparticles improved the survival rate of cryopreserved M II-stage porcine oocytes, but the difference between nanoparticles with different diameters of was not significant. In order to study the mechanism of nano-cryopreservation, the cooling rate of cryoprotectant was measured by ultra-fast temperature measurement system and the melting enthalpy of cryoprotectant was measured by differential scanning calorimeter (DSC). The results showed that the adding of nanoparitcles could not increase the cooling rate of cryoprotectant, but could decreases the amount of ice crystals during freezing and warming. Therefore, the mechanical injury within and outside cells might be effectively reduced.
Animals ; Cell Survival ; physiology ; Cryopreservation ; methods ; veterinary ; Cryoprotective Agents ; pharmacology ; Durapatite ; pharmacology ; Female ; Fertilization in Vitro ; methods ; veterinary ; Metaphase ; Nanoparticles ; Oocytes ; cytology ; Swine ; Vitrification

Objective:To explore the repairing effects of 3D-printed nano-β-tricalcium phosphate (β-TCP) scaffolds loaded with vancomycin and bone morphogenetic protein-2 (BMP-2) for seawater -soaked tibial bone defects in rabbits. Methods:A total of 27 male New Zealand White rabbits were assigned to the normal group using a random number table method, with each group consisting of 9 rabbits. The rabbit tibial bone defect model was created using the osteotomy surgical method. Eight hours after operation, the wounds in the control group and seawater group were immersed in seawater for 2 hours, and those in the normal group were not immersed. After an observation period of 5-7 days, no significant redness or purulent discharge was observed in the wound appearance, then debridement was performed followed by corresponding implantations: the control group with gelatin sponges loaded with vancomycin and BMP-2, and the other two groups with 3D-printed nano-β-TCP scaffolds loaded with vancomycin and BMP-2. After filling the bone defects with the respective materials, all groups underwent layer-by-layer suturing of the wound, followed by disinfection with iodine and injection of gentamicin to prevent infection. The affected limbs were then immobilized using a plaster cast. The affected limbs were imaged using anteroposterior X-ray at 4, 8 and 16 weeks after operation, and the repair effects were evaluated using the Lane-Sandhu X-ray scoring system. At 16 weeks after operation, the bone defect tissues were collected for HE staining to observe bone tissue growth.Results:At 4 weeks after operation, the Lane-Sandhu X-ray score in the control group was significantly lower than that in the normal group [(2.8±1.1)points vs. (1.1±0.9)points] ( P<0.05), and that in the seawater group [(2.2±1.0)points] was not significantly different from those in the other two groups (all P>0.05). At 8 weeks after operation, the seawater group [(6.1±0.9)points] and the control group [(2.8±1.0)points] exhibited lower Lane-Sandhu X-ray score compared to the normal group [(8.2±1.0)points] (all P<0.05), and the seawater group showed a higher score compared to the control group ( P<0.05). At 16 weeks after operation, the control group [(3.8±1.0)points] exhibited a lower Lane-Sandhu X-ray score compared to the normal group [(10.0±1.3)points] and the seawater group [(9.3±1.2)points] (all P<0.05), while no significant difference was noted between the latter two ( P>0.05). At 16 weeks after operation, histological observations revealed varying degrees of bone tissue formation in three groups, with the normal group showing the best bone defect repair effect, followed by the seawater group. Conclusion:The 3D-printed nano-β-TCP scaffolds loaded with vancomycin and BMP-2 are effective for the treatment of seawater -soaked bone defects, which can promote bone tissue repair.

Objective To compare the biomechanical characteristics of new assembly of locking compression plate (NALCP) and locking compression plate (LCP) in internal fixation of femoral shaft comminuted fractures.Methods The preparation of a femoral shaft wedge fracture model (AO type 32-C2.1),six pairs of (12) femoral specimens were collected and divided into two groups randomly,with six in each group.The Group A was made up of the new assembly of locking compression plate fixation model (NALCP),and Group B the locking compression plate fixation model (LCP).The biomechanical properties of steel plates in two groups were tested by axial loading and torsional loading tests.The relative maximum displacement of fracture blocks in two groups on the X,Y and Z axes (the coronal axis was set as X axis,through the medial and lateral femur;the transverse axis was set as Z axis,through the femoral intercondylar fossa,perpendicular to the X axis;the sagittal axis was set as Y axis,perpendicular to the X and Z axis),the maximum strain,and the average strain of the steel plate were recorded.Strain distribution nephogram was produced,and the axial loading fatigue test results of Group A were recorded.Results Axial loading test:the relative maximum displacement of fracture in Group A on X,Y and Z axis were smaller than those in Group B (P ＜0.05 or 0.01);the main strain of Group A was greater than that of Group B (P ＜0.01);there was no significant difference in the average strain between Group A and Group B (P ＞ 0.05).Torsional loading test:The relative maximum displacement of fracture in Group A on X and Z axis was smaller than that of Group B (P ＜ 0.01);there was no statistically significant difference between the two groups on the Y axis (P ＞ 0.05);the main strain of plate in Group A was greater than that in Group B (P ＜ 0.01);there was no statistically significant difference in the average strain between Group A and Group B (P ＞ 0.05).There was no obvious difference in strain distribution between the two groups.In Group A,the fatigue test of axial cyclic loading was performed for 1 million times,and the NALCP was intact without deformation,loosening,or rupture.Conclusion NALCP can provide strong mechanical stability for comminuted femoral fracture.The design of bridge steel plate is reasonable,which can effectively avoid stress concentration,reduce the stress shielding of steel plate,and facilitate bone healing.

Objective To compare the stress and its distribution between our self-designed new assembly of locking compression plate (NALCP) of low elastic modulus versus conventional locking compression plate (LCP) in fixation of femoral comminuted fractures.Methods Six pairs of cadaveric femur were used to create models of middle femoral comminuted fracture.The femoral fracture models were fixated respectively by NALCP of Ti2448 with low elastic modulus (E =30 Gpa) (NALCP group) and conventional LCP of Ti-6Al-4V with high elastic modulus (E =110 Gpa) (LCP group).Axial and torsion loads were applied on the models in the 2 groups to simulate those on one leg when a person slowly walks.The relative maximum displacements on the X,Y and Z axes of fracture fragments,and the maximum and average strains of the plate were recorded in the 2 groups.Nephograms of strain distribution were made for the 2 groups.The results of fatigue test under axial loads were recorded for NALCP group.Results Both the axial and torsion loading tests showed significantly larger principal and average strains in NACLP group than in LCP group (P ＜ 0.05).However,there were no significant differences between the 2 groups in the relative maximum displacements of fracture fragments on X,Y or Z axis (P ＞ 0.05).The plate strain nephograms for the 2 groups showed consistent strain distributions.The plates in NALCP group survived 1,000,000 fatigue tests under axial loads,without any deformation,loosening or breakage.Conclusion As our NALCP of low elastic modulus may be better in stress transmission and distribution,it can effectively reduce the effect of stress-shielding and promote bone healing.