A novel Aspergillus terreus strain M11 was isolated from the compost containing cellulose and identified. The isolate grow best at 45℃ and pH2.0. It was found that the activity of the CMCase was up to 3.680IU/mL with high heat stability and the optimal reaction conditions of the CMCase were at 60℃ and pH2.0.

Benzazepine is a kind of fused ring structure, which is composed of nitrogen-containing seven-membered ring and benzene ring. The introduction of benzazepine scaffolds into compounds can not only adjust the physicochemical properties, maintain or enhance the biological activities of the compounds, but also improve the pharmacokinetic properties, increase the brain permeability, and reduce the toxicity of hERG of the compounds, which is one of the privileged scaffolds for rational design and structural optimization of drug molecules. Benzazepine scaffolds can be constructed by different synthetic methods such as Dickmann condensation reaction, Mitsunobu reaction, Pictet-Spengler reaction, CMD reaction, multicomponent reactions (MCRs), metal catalysis reactions and asymmetric catalysis etc., which play an important role in enriching the structure diversity of drug molecules.

OBJECTIVETo investigate the prevalence and possible influencing factors of depressive disorder in surgical inpatients.

METHODSTwo hundred and sixty-six surgical inpatients meeting the inclusion criteria were first screened with the self rating depression scale (SDS), and then the subjects screened positive and 20% of those screened negative were evaluated with Structured Clinical Interview for DSM-IV Axis I Disorders (SCID) as a gold standard for diagnosis of depressive disorder. Possible influencing factors were also analyzed by experienced psychiatrists.

RESULTSThe standard score of SDS in the surgical inpatients were significantly higher than those in the Chinese norm, and the incidence of depressive disorder in the surgical inpatients was 37.2%. Unvaried analysis showed that depressive disorder were associated with gender, education, economic condition, variety of diseases, hospitalization duration, and treatment methods. Logistic regression analysis revealed that gender, economic condition, treatment methods and previous history were the main influencing factors.

CONCLUSIONSThe incidence of depressive disorder in the surgical inpatients is high, and it is mainly influenced by gender, economic condition, treatment methods and previous history.

Adolescent ; Adult ; Aged ; Aged, 80 and over ; Depressive Disorder ; epidemiology ; Female ; Humans ; Inpatients ; statistics & numerical data ; Male ; Middle Aged ; Prevalence ; Surgery Department, Hospital ; statistics & numerical data

Objective To compare the dosimetric difference between RapidArc and fixed gantry angle dynamic IMRT (dIMRT) for central-type lung cancer radiotherapy. Methods Therapy for 10 patients previously treated with dIMRT was replanned with RapidArc. Dose prescription was 66 Gy/33 fraction. Comparative endpoints were planning target volume (PTV) dose, doses to surrounding structures,number of monitor units, and treatment delivery time. Results There was no significant dosimetric difference between RapidArc and dIMRT. Compared with dIMRT, RapidArc slightly elevated target volume dose, lung V5, V10. The average values of lung V20, V30 and heart V30 were larger in dIMRT than those in RapidArc. The number of monitor units was reduced by 32% and the treatment time by 66% in RapidArc.Conclusions Both RapidArc and dIMRT plans could meet the clinical therapy needs. RapidArc could achieve similar target coverage and sparing of organs at risk, with fewer monitor units and shorter delivery time than dIMRT.

The influence of low tube voltage in dual source CT (DSCT) coronary artery imaging on image quality and radiation dose and its application value in clinical practice were investigated. Totally, 300 cases of chest pain with low body mass index (BMI <18.5 kg/m(2)) subjected to DSCT coronary artery imaging were prospectively enrolled. The heart rate in all patients were greater than 65/min. The retrospective ECG gated scanning mode and simple random sampling method were used to assign the patients into groups A, B and C (n=100 each). The patients in groups A, B and C experienced 120-, 100-, and 80-kV tube voltage imaging respectively, and the image quality was evaluated. The CT volume dose index (CTDIvol) and dose length product (DLP) were recorded, and the effective dose (ED) was calculated in each group. The image quality scores and radiation doses in groups were compared, and the influence of tube voltage on image quality and radiation dose was analyzed. The results showed that the excellent rate of image quality in groups A, B and C was 95.69%, 94.72% and 96.33% respectively with the difference being not statistically significant among the three groups (P>0.05). The CTDIvol values in groups A, B and C were 51.35±12.21, 21.28±7.13 and 6.34±3.34 mGy, respectively, with the difference being statistically significant (P<0.05). The ED values in groups A, B and C were 9.27±1.63, 4.56±2.29 and 2.29±1.69 mSv, respectively, with the difference being statistically significant (P<0.05). It was suggested that for the patients with low BMI, the application of DSCT coronary artery imaging with low tube voltage can obtain satisfactory image quality, and simultaneously, significantly reduce the radiation dose.

Objective To observe the expression of serine/threonine kinase 31 (STK31) in osteosarcoma and its effect on the malignant biological behavior of osteosarcoma.Methods Fifteen cases of osteosarcoma specimens and adjacent normal tissue were collected.The expression of STK31 in tumor tissues and normal tissue were detected by immunohistochemistry,real-time quantitative PCR and Western blot.The STK31 knockout plasmids PGenesil-STK31-shRNA or control plasmid pGenesil-1 were transfected into osteosarcoma cell line MG63 cells.The effect of STK31 on the proliferation of MG63 cells was detected by CCK8 cell activity assay.Tanswell experiment was used to observed the effect of STK31 on the migration ability of osteosarcoma cells.Results Immunohistochemical showed that STK31 expressed in the tumor tissue,and it was significantly higher than the adjacent normal tissues;Real time quantitative PCR[(3.65±0.83)vs.(1.05±0.14),P＜0.05] and Western blot also revealed that STK31 expression in tumor tissue were significantly higher than adjacent normal tissues(P＜0.05);CCK8 experiments showed that knockdown STK31 inhibited proliferation of MG63 cell when compared with the control group after 36 h[(1.71±0.17)vs.(1.39±0.11),P＜0.05],72 h[(2.15±0.21)vs.(1.54±0.14),P＜0.05];Tansewell experiments showed that transfection of pGenesil-STK31-shRNA could suppress MG63 cell's migration[(13±4)vs.(55±8),P＜0.05].Conclusion STK31 is overexpression in osteosarcoma with increased biological activity of osteosarcoma cells.

BACKGROUND:The bone morphogenetic protein 2 (BMP2)/vascular endothelial growth factor (VEGF) dual gene activated nanobone putty has been constructed in the previous experiments.
OBJECTIVE:To investigate the effects of osteogenesis and osteogenic gene expression in mice by implanting BMP2/VEGF dual gene activated nanobone putty.
METHODS:Twenty-four Kunming mice (48 sides) were randomly divided into four groups. Animals in each group (12 samples) were injected different materials into the right thigh muscle pouches:nanobone putty+hBMP2/VEGF plasmid;nanobone putty+hBMP2 plasmid;blank plasmid+nanobone putty;nanobone putty only. The effects of osteogenesis were evaluated by radiography, histology and molecular biology analysis in 2, 4 weeks after operation.
RESULTS AND CONCLUSION:Bone-like tissues were observed in groups of nanobone putty+hBMP2/VEGF plasmid and nanobone putty+hBMP2 plasmid after operation. There was apparent BMP2 and VEGF mRNA expression in group of nanobone putty+hBMP2/VEGF plasmid. Group of nanobone putty+hBMP2/VEGF plasmid was significantly better than group of nanobone putty+hBMP2 plasmid in the alkaline phosphatase levels, the speed of osteogenesisas and amount of new bone (P<0.05). Groups of blank plasmid+nanobone putty and nanobone putty had no obvious osteogenesis performance. Either BMP2/VEGF dual gene activated nanobone putty or BMP2 gene activated nanobone putty had the osteogenic ability in vivo. And the former was significantly enhanced in the speed and quality of osteogenesis.

Humans ; Myocardium ; cytology ; Stem Cells

BACKGROUND: Our previous findings have shown that poly(lactic acid)/hydroxyapatite (PLA/HA) composite biomaterials prepared by the supercritical carbon dioxide method have good physiochemical properties and biocompatibility. However, the composite materials only have osteoconductivity but no osteoinductivity. OBJECTIVE: To prepare icariin-PLA/HA (IC-PLA/HA) composite biomaterials with good osteoconduction and osteoinduction. METHODS: The supercritical carbon dioxide method was used to prepare IC-PLA/HA composite biomaterials containing 10-4, 10-5, 10-6mmol/g IC, named as IC-PLA/HA(1 000), IC-PLA/HA(100) and IC-PLA/HA(10). PLA/HA composite material served as controls. Biomechanical properties, porosity, sustained release characteristics were detected, and scanning electron microscope observation was performed, in order to screen out the optimal IC content in the composite materials. RESULTS AND CONCLUSION: (1) Compressive strength and elastic modulus of IC-PLA/HA(1 000), IC-PLA/HA(100) and IC-PLA/HA(10) showed no difference from those of PLA/HA. (2) The porosity of all the composite materials was over 75%, and there was still no difference among groups. (3) The IC release from IC-PLA/HA was faster within the first 3 days, and then reduced gradually. However, after 7 days, the IC release plateaued, and the IC release amount from the IC-PLA/HA(100) was close to 10-7mol/L that had been confirmed to be an effective and safe concentration in the previous experiments. (4) Under the scanning electron microscope, HA and PLA were mixed homogeneously and IC was difficult to be identified. The pore size of the IC-PLA/HA(100) ranged from 50 μm to 150 μm. Overall, the IC-PLA/HA composite biomaterials have good mechanical and sustained-release properties.