This study aims to explore the scientific connotation of sinking Rehmanniae Radix has the best quality and compare the quality between floating and sinking fresh Rehmanniae Radix samples. Ultra-performance liquid chromatography tandem quadrupole electrostatic field Orbitrap high-resolution mass spectrometry(UHPLC-Q-Orbitrap HRMS) was employed to detect the chemical components in floating and sinking fresh Rehmanniae Radix samples. The fingerprint of fresh Rehmanniae Radix was established by high performance liquid chromatography(HPLC), and four index components were determined simultaneously. The cluster analysis, principal component analysis(PCA), and orthogonal partial least squares-discriminant analysis(OPLS-DA) were conducted to compare the quality of floating and sinking fresh Rehmanniae Radix samples. An evaporative light-scattering detector was used to compare the content of five sugars. The extract yield and drying rate were determined, and the quality connotation of sinking Rehmanniae Radix has the best quality was explained by multiple indicators. A total of 41 components were preliminarily identified from fresh Rehmanniae Radix by UHPLC-Q-Orbitrap HRMS, including 7 iridoid glycosides, 9 phenylethanol glycosides, 6 amino acids, 4 sugars, 3 phenolic acids, 5 nucleosides, 3 organic acids, 1 ionone, 1 furan, 1 coumarin, and 1 phenylpropanoid. The results showed that the main chemical components were consistent between floating and sinking fresh Rehmanniae Radix. Nine common peaks were identified in the fingerprints of 15 batches of floating and sinking fresh Rehmanniae Radix samples, and the similarity of fingerprints was greater than 0.9. The cluster analysis, PCA, and OPLS-DA classified floating and sinking fresh Rehmanniae Radix sasmples into two categories, indicating differences in the quality between them. The total content of catalpol, rehmannioside D, ajugol, and verbascoside in sinking fresh Rehmanniae Radix samples was higher than that in floating samples of the same batch and specification, and the main differential component was catalpol. The total content of fructose, glucose, sucrose, raffinose, and stachyose in sinking fresh Rehmanniae Radix samples was higher than that in floating samples of the same batch and specification, and the main differential component was stachyose. The extract yield and drying rate of the sinking samples were higher than those of floating samples. This study preliminarily showed that floating and sinking fresh Rehmanniae Radix samples had the same components but great differences in the content of medicinal substance basis. The total content of four glycosides and five sugars, extract yield, and drying rate of sinking fresh Rehmanniae Radix samples is higher than that of floating samples of the same batch and specification. These findings, to a certain extent, explains the scientificity of sinking Rehmanniae Radix has the best quality recorded in ancient books and provide a reference for the quality control and clinical application of fresh Rehmanniae Radix.
Chromatography, High Pressure Liquid/methods* ; Drugs, Chinese Herbal/chemistry* ; Rehmannia/chemistry* ; Chemometrics ; Mass Spectrometry/methods* ; Quality Control ; Principal Component Analysis ; Plant Extracts

Objective To explore feasibility of 3D metal printing technology combined with virtual design proximal clavicle anatomical plate.Methods A 52-year-old male healthy volunteer was retrospectively selected to design proximal clavicle anatomical plate system by using Mimics15.01,NX12.0 and other software.STL data were input into 3D printer to print 1∶1 clavicle model and proximal clavicle anatomical plate.The fit of the plate was tested in vitro and the accuracy of screw position was evaluated by imaging.Printing time of model,nail path design and fabrication time of the anatomical plate at proximal clavicle were recorded.Results The 3D metal printing proximal clavicle anatomical plate fitted well to clavicle model,orienta-tion of proximal clavicle locking screw was accurate,and X-ray and CT scan showed the screw position was good.Printing time of model,the time of nail path design,and the time of making anatomical plate of proximal clavicle were 120,15 and 300 min respectively.Conclusion The proximal clavicular anatomical plate system based on 3D metal printing technology could achieve good lamination of proximal clavicular fracture plate and precise screw placement,providing a new and accurate surgical method for the treatment of the proximal clavicular fracture.

Objective:To assess the deformation of the bladder-neck opening and the impact of the bladder-neck angle(BNA)on urination in male patients by fluid-structure interaction(FSI)analysis.Methods:We established geometric models of the blad-der,prostate and urethra were established,incorporating both normal and enlarged BNAs,and assessed the effects of BNA alteration on urinary flow by FSI simulation of the flow rate and pressure of the urine within the bladder,bladder neck and urethra,and that of pros-tate displacement as well.We retrospectively analyzed the clinical data on 145 male patients from the Second Hospital of Hebei Medical University between June 2020 and June 2023,39 with acute urine retention(the AUR group)and 106 without(the non-AUR group),and evaluate the impact of BNA on urination based on the urinary flow rate and prostate volume.Results:Comparative simulation a-nalysis showed significant differences in the total urethral pressure and flow rate between the normal and enlarged BNA models(P＜0.05).The maximum prostate displacement was found at the bladder neck,with moderate displacement and unchanged urethral diame-ter in the normal BNA model,but significant displacement and a reduced urethral opening diameter in the enlarged BNA model.FSI analysis confirmed an evident impact of enlarged BNA on urination,more significant in the AUR than in the non-AUR patients(P＜0.05).The BNAs in the patients with the maximum urinary flow rate(Qmax)of＜10,10-15 or＞15 ml/s were 83.7°±2.5°,67.5°±1.8° and 65.1°±4.8° respectively,with statistically significant difference between the former one and the latter two groups(P＜0.05).The BNAs in the patients with normal prostate volume or BPH of grade Ⅰ,Ⅱ,Ⅲ or Ⅳ were 65.0°±3.7°,67.2°±3.1°,71.5°±2.0°,82.8°±3.5° and 105.8°±6.0°,respectively(P＜0.05),with statistically significant difference between BPH grades Ⅲ and Ⅳ(P＜0.05)as well as between these two and the other three groups(P＜0.05),but not among the normal prostate volume,BPH grade Ⅰ and BPH grade Ⅱ groups(P＞0.05).Spearman correlation analysis indicated that BNA was strongly correlated with total prostate volume(TPV),transition zone volume(TZV),intravesical prostatic protrusion(IPP),prostatic urethral angle(PUA),IPSS,and Qmax(P＜0.05).Conclusion:Changes in BNA affect urination and are closely associated with the se-verity of prostate hyperplasia.The BNA may be an important anatomical factor for assessing the severity of lower urinary tract symptoms in BPH patients.

AIM To establish the quality standard of the zhujieshen Formula Granules based on standard decoction.METHODS The contents and transfer rates of ginsenoside Ro and chikusetsu saponin Ⅳa in standard decoction and formula granules were determined by HPLC,after which the transfer rates were calculated.The HPLC characteristic chromatograms of standard decoctions were established,after which cluster analysis and principal component analysis were adopted.Then the HPLC characteristic chromatograms of formula granules were established.RESULTS Nine common peaks were found in the HPLC characteristic chromatograms of seventeen batches of standard decoctions with the similarities of more than 0.9(except for S6,S12),which were clustered into two categories,and the accumulative variance contribution rate of three principal components reached 86.7％.The contents of ginsenoside Ro in three batches of formula granules were 83.1-88.6 mg/g,and the transfer rates were 53.1％-55.5％.The contents of chikusetsusaponin Ⅳa were 14.8-15.0 mg/g,and the transfer rates were 47.4％-48.1％.Nine common peaks were found in the HPLC characteristic chromatograms of three batches of formula granules with the similarities of 0.998,0.998 and 0.999,respectively.CONCLUSION This reasonable and reliable method can comprehensively evaluate the quality of Zhujieshen Formula Granules,and provide a reference for the quality control.

Objective:To explore the effects of G protein-coupled receptor 55 (GPR55) antagonist CID16020046 on renal fibrosis in mice, and provide a new method and idea for the treatment of renal fibrosis.Methods:(1) GPR55 overexpression and GPR55 antagonist CID16020046 were used in renal fibroblasts (NRK-49F) of rats, respectively. Meanwhile,transforming growth factor-β1 (TGF-β1) was applied in the NRK-49F cells to observe the expression of fibrosis-related factors and inflammatory factors. (2) A mouse model of renal fibrosis with unilateral ureteral obstruction (UUO) was established in vivo. Eight-week-old male C57BL/6J mice (20-25 g) were randomly divided into three groups according to the random number table method: sham group ( n=6), model group (UUO group, n=7), model + CID16020046 drug (UUO+CID group, n=8). The drug CID16020046 (10 mg/kg) was intraperitoneally injected 1 day before modeling, on the day of modeling and every day after surgery in UUO+CID group, and the corresponding dose of 0.9% normal saline was injected intraperitoneally in sham and UUO groups.The mice were sacrificed for sampling 7 days after UUO surgery, and their renal function indicators, liver transaminase, and cardiac markers were examined. Western blotting and quantitative real-time PCR were used to detect the expression of renal fibrosis-related factors and inflammatory factors. Immunohistochemistry staining, Sirius red staining and Masson trichrome staining were used to detect the pathological changes of renal tissues. Results:(1) After NRK-49F cells were stimulated by TGF-β1, the mRNA and protein expression levels of GPR55 were significantly increased (both P<0.05). There was no statistically significant difference in the mRNA expression of fibrosis-related factors fibronectin and collagen Ⅰ, and inflammatory factors interleukin-1β and tumor necrosis factor-α between TGF-β1 group and TGF-β1 + GPR55 overexpression group (all P>0.05). Compared with the TGF-β1 group, the protein expression levels of fibrosis-related factors alpha-smooth muscle actin (α-SMA) and vimentin, and the mRNA expression levels of collagen Ⅰ and α-SMA were lower in the TGF-β1 + CID group (all P<0.05). (2) Compared with sham group, the mRNA and protein expression levels of GPR55 in UUO group were higher (both P<0.05). The serum creatinine in the UUO+CID group was lower compared to the UUO group ( P<0.05). There was no statistically significant difference in blood urea nitrogen, alanine aminotransferase, aspartate aminotransferase, lactate dehydrogenase and creatine kinase isoenzyme between UUO group and UUO+CID group (all P>0.05). Compared with the UUO group, the protein expression levels of renal fibrosis-related factors fibronectin, collagen Ⅰ and vimentin, and the mRNA expression levels of fibronectin, collagen Ⅰ, collagen Ⅲ and α-SMA were lower in the UUO+CID group (all P<0.05). The degree of renal tubular dilation and interstitial collagen fiber deposition in the UUO+CID group was significantly reduced compared to the UUO group (all P<0.05). Conclusions:CID16020046 can reduce serum creatinine in UUO mice, protect renal function, and simultaneously decrease the expression of fibrosis-related factors in renal fibroblasts and mouse kidney tissues, thereby alleviating renal fibrosis.

Spinal cord injury (SCI) is a devastating traumatic disease seriously impairing the quality of life in patients. Expectations to allow the hopeless central nervous system to repair itself after injury are unfeasible. Developing new approaches to regenerate the central nervous system is still the priority. Exosomes derived from mesenchymal stem cells (MSC-Exo) have been proven to robustly quench the inflammatory response or oxidative stress and curb neuronal apoptosis and autophagy following SCI, which are the key processes to rescue damaged spinal cord neurons and restore their functions. Nonetheless, MSC-Exo in SCI received scant attention. In this review, we reviewed our previous work and other studies to summarize the roles of MSC-Exo in SCI and its underlying mechanisms. Furthermore, we also focus on the application of exosomes as drug carrier in SCI. In particular, it combs the advantages of exosomes as a drug carrier for SCI, imaging advantages, drug types, loading methods, etc., which provides the latest progress for exosomes in the treatment of SCI, especially drug carrier.

Objective:To explore the role of mechanical hemodynamic support (MHS) in mapping and catheter ablation of patients with hemodynamically unstable ventricular tachycardia (VT), report single-center experience in a cohort of consecutive patients receiving VT ablation during MHS therapy, and provide evidence-based medical evidence for clinical practice.Methods:This was a retrospective cohort study. Patients with hemodynamically unstable VT who underwent catheter ablation with MHS at Beijing Anzhen Hospital, Capital Medical University between August 2021 and December 2023 were included. Patients were divided into rescue group and preventive group according to the purpose of treatment. Their demographic data, periprocedural details, and clinical outcomes were collected and analyzed.Results:A total of 15 patients with hemodynamically unstable VT were included (8 patients in the rescue group and 7 patients in the preventive group). The acute procedure was successful in all patients. One patient in the rescue group had surgical left ventricular assist device (LVAD) implantation, remaining 14 patients received extracorporeal membrane oxygenation (ECMO) for circulation support. ECMO decannulation was performed in 12 patients due to clinical and hemodynamic stability, of which 6 patients were decannulation immediately after surgery and the remaining patients were decannulation at 2.0 (2.5) d after surgery. Two patients in the rescue group died during the index admission due to refractory heart failure and cerebral hemorrhage. During a median follow-up of 30 d (1 d to 12 months), one patient with LVAD had one episode of ventricular fibrillation at 6 months after discharge, and no further episodes of ventricular fibrillation and/or VT occurred after treatment with antiarrhythmic drugs. No malignant ventricular arrhythmia occurred in the remaining 12 patients who were followed up.Conclusions:MHS contributes to the successful completion of mapping and catheter ablation in patients with hemodynamically unstable VT, providing desirable hemodynamic status for emergency and elective conditions.

Objective To observe the effect of canagliflozin combined with enalapril on diabetic nephropathy(DN).Methods DN patients were randomly divided into control group and treatment group.All patients in 2 groups received basic treatment of recombinant human insulin injection,and the control group was orally administered enalapril tablet 10 mg(qd).The treatment group was given orally canagliflozin tablet 100 mg(qd)on the basis of the control group.Both groups were treated for 8 weeks.Renal function,blood glucose index,serum vascular endothelial growth factor(VEGF),transforming growth factor-β(TGF-β),homocysteine(HCY)levels,clinical efficacy and incidence of adverse drug reactions were compared between 2 groups.Results There were 71 cases were included in the control group and 73 cases in the treatment group.After treatment,β2 microglobulin(β2-MG)in treatment group and control group were(0.21±0.03)and(0.28±0.04)mg·L-1;blood urea nitrogen(BUN)were(4.23±0.42)and(5.58±0.65)mmol·L-1;serum creatinine(SCr)were(89.32±8.29)and(101.25±10.18)pmol·L-1;24 h microalbumin(mAlb)were(49.38±5.06)and(58.21±6.43)mg;glycosylated hemoglobin(HbA1c)were(6.10±0.11)％and(6.45±0.16)％;2 h postprandial blood glucose levels were(6.05±0.78)and(7.68±1.82)mmol·L-1;fasting blood glucose(FBG)were(5.02±0.32)and(5.67±0.65)mmol·L-1;VEGF levels were(350.18±20.04)and(389.04±24.16)pg·mL-1;TGF-β were(148.32±16.57)and(168.24±20.02)pg·mL-1;HCY were(13.12±2.38)and(19.35±3.21)pmol·L-1,the differences were statistically significant(all P＜0.05).After treatment,the total effective rate of treatment group and control group were 83.56％(61 cases/73 cases)and 67.61％(48 cases/71 cases),the difference was statistically significant(P＜0.05).The total incidence of adverse drug reactions in treatment group and control group were 6.85％and 4.23％,with no significant difference(P＞0.05).Conclusion Canagliflozin combined with enalapril is effective in the treatment of diabetic nephropathy,which can improve renal function,regulate blood glucose metabolism,and down-regulate serum VEGF,TGF-β and HCY levels,and is safe and reliable.

Objective To observe the clinical efficacy and safety of rituximab injection combined with leflunomide tablets in the treatment of patients with systemic lupus erythematosus(SLE).Methods The SLE patients were divided into control and treatment groups according to cohort method.The control group received leflunomide with 50 mg·d-1 after meal in the first 3 days of treatment and was adjusted to 20 mg·d-1 thereafter.On the basis of control group,the treatment group was combined with rituximab,375 mg·m-2 was given intravenously every 2 weeks in the first 3 times of treatment,and adjusted to once every 4 weeks from the 4th dose.Two groups were treated for 24 weeks.The clinical efficacy,systemic lupus erythematosus disease activity index(SLEDAI)scores,serological indicators,24-hour urinary protein and adverse drug reactions were compared between two groups.Results The treatment and control groups were enrolled 74 cases and 72 cases,respectively.After treatment,the total effective rates of treatment and control groups were 91.89％(68 cases/74 cases)and 79.17％(57 cases/72 cases)with significant difference(P＜0.05).After treatment,the SLEDAI scores of treatment and control groups were(7.21±1.67)and(9.03±1.35)points;the levels of anti-Smith/ribonucleoprotein antibodies were(81.43±18.25)and(59.38±14.61)U·mL-1;the levels of immunoglobulin G were(12.04±2.15)and(17.28±2.64)g·L-1;the levels of interleukin-10 were(33.39±7.13)and(39.87±9.02)pg·mL-1;24-hour urinary protein quantification were(1.46±0.32)and(2.67±0.54)g·24 h-1;all the differences were statistically significant(all P＜0.05).The drug adverse reactions of two groups were liver and kidney function injury and digestive tract reactions.The total incidences of drug adverse reactions in the treatment and control groups were 13.51％and 5.56％without significant difference(P＞0.05).Conclusion Rituximab injection combined with leflunomide tablets has a definitive clinical efficacy in the treatment of SLE patients,which can significantly reduce disease activity and inflammatory reactions,improve immune function,without increasing the incidence of drug adverse reactions.

Objective To investigate the clinical effect of unilateral percutaneous vertebroplasty(PVP)combined with 3D printing technology for the treatment of thoracolumbar osteoporotic compression fracture.Methods A total of 77 patients with thoracolumbar osteoporotic compression fractures from October 2020 to April 2022 were included in the study,all of which were vertebral body compression fractures caused by trauma.According to different treatment methods,they were di-vided into experimental group and control group.Thirty-two patients used 3D printing technology to improve unilateral transpedicle puncture vertebroplasty in the experimental group,there were 5 males and 27 females,aged from 63 to 91 years old with an average of(77.59±8.75)years old.Forty-five patients were treated with traditional bilateral pedicle puncture vertebroplasty,including 7 males and 38 females,aged from 60 to 88 years old with an average of(74.89±7.37)years old.Operation time,intraoperative C-arm X-ray times,anesthetic dosage,bone cement injection amount,bone cement diffusion good and good rate,complications,vertebral height,kyphotic angle(Cobb angle),visual analogue scale(VAS),Oswestry disability index(ODI)and other indicators were recorded before and after surgery,and statistically analyzed.Results All patients were followed up for 6 to 23 months,with preoperative imaging studies,confirmed for thoracolumbar osteoporosis com-pression fractures,two groups of patients with postoperative complications,no special two groups of patients'age,gender,body mass index(BMI),time were injured,the injured vertebral distribution had no statistical difference(P＞0.05),comparable data.Two groups of patients with bone cement injection,bone cement dispersion rate,preoperative and postoperative vertebral body height,protruding after spine angle(Cobb angle),VAS,ODI had no statistical difference(P＞0.05).The operative time,intra-operative fluoroscopy times and anesthetic dosage were statistically different between the two groups(P＜0.05).Compared with the traditional bilateral puncture group,the modified unilateral puncture group combined with 3D printing technology had shorter operation time,fewer intraoperative fluoroscopy times and less anesthetic dosage.The height of anterior vertebral edge,kyphosis angle(Cobb angle),VAS score and ODI of the affected vertebrae were statistically different between two groups at each time point after surgery(P＜0.05).Conclusion In the treatment of thoracolumbar osteoporotic compression fractures,3D printing technology is used to improve unilateral puncture PVP,which is convenient and simple,less trauma,short operation time,fewer fluoroscopy times,satisfactory distribution of bone cement,vertebral height recovery and kyphotic Angle correction,and good functional improvement.