ObjectiveTo develop a community-family management model for older adults with mild cognitive impairment (MCI) and to formulate detailed application specifications, and to fully leverage the initiative of communities and families under limited resource conditions, for achieving community-based early detection and early intervention for older adults with MCI. MethodsA systematic literature review was conducted to identify pertinent publications. Corpus-based research methodologies were employed to extract, refine, integrate and synthesize management elements, thereby establishing the specific content and service processes for each stage of the management model. Utilizing the 5W2H analytical framework, essential elements such as management stakeholders, target populations, content and methods for each stage were delineated. The model and its application guidelines were finalized through expert consultation and demonstration. ResultsAn expert evaluation of the management model yielded mean scores of 4.84, 4.32 and 4.84 for acceptability, feasibility and systematicity, respectively. By integrating the identified core elements with expert ratings and feedback, the final iteration of the community-family management model for older adults with MCI was formulated. This model comprised of five stages: screening and identification, comprehensive assessment, intervention planning, monitoring and referral pathways to ensure implementation, and enhanced support for communities, family members and caregivers. Additionally, it included 18 specific application guidelines. ConclusionThe proposed management model may theoretically help delay cognitive decline, improve cognitive function and potentially promote reversal from MCI to normal cognition. It may also enhance the awareness and coping capacity of older adults and their families, strengthen community healthcare professionals' ability to early identify and manage MCI.

This paper systematically summarizes the practical experience of the 2025 Dingri earthquake emergency medical rescue in Tibet. It analyzes the requirements for earthquake medical rescue under conditions of high-altitude hypoxia, low temperature, and low air pressure. The paper provides a detailed discussion on the strategic layout of earthquake medical rescue at the national level, local government level, and through social participation. It covers the construction of rescue organizational systems, technical systems, material support systems, and information systems. The importance of building rescue teams is emphasized. In high-altitude and cold conditions, rapid response, scientific decision-making, and multi-party collaboration are identified as key elements to enhance rescue efficiency. By optimizing rescue organizational structures, strengthening the development of new equipment, and promoting telemedicine technologies, the precision and effectiveness of medical rescue can be significantly improved, providing important references for future similar disaster rescues.

Objective To study the chemical constituents of Fallopia aubertii L.Henry Holub. Methods The chemical constituents of Fallopia aubertii L.Henry Holub. were separated and purified by online two-dimensional preparative liquid chromatography and identified by physical and chemical constants and spectral analysis. The inhibitory activities on xanthine oxidase were determined by ultraviolet spectrophotometry. Results Ten compounds were isolated from the extract of Fallopia aubertii L.Henry Holub, including isotachioside（1）, 3,4,5-trimethoxyphenyl-（6'-O-galloyl）-O-β-D-Glucopyranoside（2）, 1-hydroxy-,4,5-1-O-[6'-O-（4''-carboxy-1'',3'',5'trihydrotrimethoxyphenylxy）-phenyl]-β-D-glucopyranoside（3）, myricetrin（4）, myricetin（5）, rutin（6）, quercetin-3-O-β-D-galactoside（7）, quercetin-3-O-β-D-glucopyranoside（8）, lyciumideA（9）, and N-trans-Feruloyltyramine（10）. The inhibitory activity test results showed that the IC₅₀ of compound 5 was 15.92 μmol/L, and the IC₅₀ of compound 6 was 87.36 μmol/L. Conclusion Compounds 1,2,3,4 and 8 were isolated from Medicago polymorpha for the first time. Compounds 5 and 6 had xanthine oxidase inhibitory activity.

Objective: To investigate the changing trends for associations of anxiety and depressive symptoms with smartphone addiction among middle school students, so as to provide a scientific basis for preventing smartphone addiction in middle school students. Methods: From 2022 to 2023, a method of combining convenient sampling with cluster sampling was used to select 8 923 middle school students from 27 junior high schools and 3 senior high schools in a district of Shenzhen City between September 2022 (baseline, T1) and September 2023 (follow up, T2). The Smartphone Addiction Scale-Short Version (SAS-SV), Patients Health Questionnaire-9 Item (PHQ-9), and Generalized Anxiety Disorder 7-item Scale (GAD-7) were administered to assess smartphone addiction, anxiety and depressive symptoms. Mixed effects models were used to analyze the association of anxiety and depressive symptoms with smartphone addiction among middle school students. Results: From September 2022 to September 2023, the reported prevalence of smartphone addiction increased from 24.22% to 25.25% ( χ 2=45.71); and smartphone addiction scores [ 24.00 (16.00, 32.00),25.00(16.00, 33.00)], anxiety symptom scores [2.00(0.00, 7.00),3.00(0.00, 7.00)] and depressive symptom scores[3.00(0.00, 8.00),5.00(0.00, 9.00)] all significantly increased ( Z =-17.43, -42.38, -41.57) (all P <0.05). There were statistically significant difference in the distribution of anxiety and depression symptom levels among middle school students in 2022 and 2023 ( χ 2=85.15, 106.85, both P <0.05). After adjusting for covariates such as age, gender and family background, mixed effects models revealed dose response associations of anxiety and depressive symptoms with smartphone addiction among middle school students:mild anxiety symptom( OR =3.22), moderate to severe anxiety symptom ( OR =5.36), mild depressive symptom ( OR =3.32) and moderate to severe depressive symptom ( OR =6.13) were significantly associated with higher risks of smartphone addiction (all P <0.05). Interaction effect analysis found that co existing anxiety and depressive symptoms synergistically increased addiction risk by 5.60 times ( OR =5.60) compared to the asymptomatic group, with 32% of the combined risk attributable to their interaction ( S=1.64, AP =0.32)(both P < 0.05 ). Conclusions Anxiety and depressive symptoms are significantly associated with smartphone addiction, exhibiting a synergistic effect. Attention should be paid to emotional issues and smartphone addiction among middle school students.

Obesity is a worldwide health problem. An imbalance in energy metabolism is an important cause of obesity and related metabolic diseases. Our previous studies showed that inhibition of miR-429 increased the protein level of uncoupling protein 1 (UCP1) in beige adipocytes; however, whether local inhibition of miR-429 in subcutaneous adipose tissue affects diet-induced obesity and related metabolic disorders remains unclear. The aim of this study was to investigate the effect of local overexpression of miR-429 sponge in subcutaneous adipose tissue on obesity and related metabolic disorders. The control adeno-associated virus (AAV) or AAV expressing the miR-429 sponge was injected into mouse inguinal white adipose tissue. Seven days later, the mice were fed a high-fat diet for 10 weeks to induce obesity. The effects of the miR-429 sponge on body weight, adipose tissue weight, plasma glucose and lipid levels, and hepatic lipid content were explored. The results showed that the overexpression of miR-429 sponge in subcutaneous white adipose tissue reduced body weight and fat mass, decreased fasting blood glucose and plasma cholesterol levels, improved glucose tolerance, and alleviated hepatic lipid deposition in mice. Mechanistic investigation showed that the inhibition of miR-429 significantly upregulated the expression of UCP1 in adipocytes and adipose tissue. These results suggest that local inhibition of miR-429 in subcutaneous white adipose tissue ameliorates obesity and related metabolic disorders potentially by upregulating UCP1, and miR-429 is a potential therapeutic target for the treatment of obesity and related metabolic disorders.
Animals ; MicroRNAs/physiology* ; Obesity/metabolism* ; Mice ; Adipose Tissue, White/metabolism* ; Metabolic Diseases ; Subcutaneous Fat/metabolism* ; Male ; Uncoupling Protein 1/metabolism* ; Diet, High-Fat ; Mice, Inbred C57BL

OBJECTIVE: To explore the differences in the implantation safety and stability of a S ₁ alar-iliac screw (S1AIS) or S2AIS for sacroiliac joint fixation, providing reference for selecting appropriate internal fixation in clinical practice. METHODS: Patients who underwent pelvic CT examination between January 2024 and December 2024 were selected. CT data from 80 patients with normal pelvic structure who met the selection criteria were included in a 1∶1 male to female ratio. CT digital reconstruction technology was used to measure the transverse and longitudinal diameters of the S1AIS and S2AIS insertable ranges, as well as the length, width, and sacral side length of the screw trajectory. The pelvic CT data from 30 patients were randomly selected based on a 1∶1 male to female ratio for three-dimensional (3D) printing of pelvic samples. The S1AIS/S2AIS with a diameter of 6.5 mm and 8.0 mm were implanted at the optimal entry/exit points on the left and right sides, respectively, to observe the perforation of the screw trajectory. The pelvic CT data from 1 patient was randomly selected for 3D printing of 10 pelvic samples to simulate Tile C2 fracture. They were divided into S1AIS group ( n=5) and S2AIS group ( n=5), with one S1AIS and one S2AIS fixation used for posterior sacroiliac joint separation, and the specimen stiffness and maximum load were measured by using an electric tension torsion dual axis universal mechanical tester. RESULTS: The anatomical parameter measurement showed that there was no significant difference in the length and width of the screw trajectory between S1AIS and S2AIS ( P>0.05), but the transverse and longitudinal diameters of the insertable ranges, as well as the sacral side length of the screw trajectory, were all greater than those of S2AIS, with significant differences ( P<0.05). After simulating the implantation of S1AIS and S2AIS with a diameter of 6.5 mm in pelvic specimens, no screw penetration was observed. Both S1AIS and S2AIS with a diameter of 8.0 mm showed screw penetration, with S2AIS having a higher incidence of posterior lateral sacral cortical penetration (46.7%) than S1AIS (3.3%) ( P<0.05). The biomechanical test showed that the stiffness and maximum load of S2AIS were significantly lower than those of S1AIS ( P<0.05). CONCLUSION As a method to fix the sacroiliac joint, the S1AIS has a larger insertable range, a longer sacral side length of the screw trajectory, a lower incidence of posterior lateral cortical rupture of the sacrum, and a greater fixation strength than S2AIS. Therefore, the implantation safety and fixation stability of the S1AIS are superior to S2AIS, and a diameter less than 8.0 mm screws should be selected as S2AIS for Chinese people.
Humans ; Bone Screws ; Sacroiliac Joint/diagnostic imaging* ; Male ; Female ; Sacrum/diagnostic imaging* ; Fracture Fixation, Internal/instrumentation* ; Ilium/diagnostic imaging* ; Tomography, X-Ray Computed ; Middle Aged ; Adult ; Printing, Three-Dimensional ; Aged

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome

Cervical spine health issues not only seriously affect patients' quality of life but also impose a heavy burden on the social healthcare system. Existing guidelines lack sufficient clinical guidance on lifestyle and work habits, such as exercise, posture, daily routine, and diet, making it difficult to meet practical needs. To address this, relying on the China Association of Chinese Medicine, Wangjing Hospital of China Academy of Chinese Medical Sciences took the lead and joined hands with more than ten institutions to form a multidisciplinary guideline development group. For the first time, the group developed the Guidelines for Cervical Spine Health Intervention based on evidence-based medicine methods, strictly following the standardized procedures outlined in the World Health Organization Handbook for Guideline Development and the Guiding Principles for the Formulation/Revision of Clinical Practice Guidelines in China (2022 Edition). This proposal systematically explains the methods and steps for developing the guideline, aiming to make the guideline development process scientific, standardized, and transparent.
Humans ; Practice Guidelines as Topic/standards* ; Cervical Vertebrae ; China

BACKGROUND: Lung cancer is the leading malignancy in China in terms of both incidence and mortality. With increased health awareness and the widespread use of low-dose computed tomography (CT), early diagnosis rates have been steadily improving. Surgical intervention remains the primary treatment option for early-stage lung cancer, and video-assisted thoracoscopic surgery (VATS) has become a common approach due to its minimal invasiveness and rapid recovery. However, post-discharge recovery remains incomplete, underscoring the importance of postoperative care. Traditional follow-up methods, lack standardization, consume significant medical resources, and increase the burden of the patients. Artificial intelligence (AI)-driven disease management platforms offer a novel solution to optimize postoperative follow-up. This study followed 463 lung cancer surgery patients using an AI-based platform, aiming to identify common postoperative issues, propose solutions, improve quality of life, reduce recurrence-related costs, and promote AI integration in healthcare. METHODS: Using the AI disease management platform, this study integrated educational videos, collaboration between healthcare teams and AI assistants, daily health logs, health assessment forms, and personalized interventions to monitor postoperative recovery. The postoperative rehabilitation status of the patients was assessed by the Leicester Cough Questionnaire (LCQ-MC). Two independent t-test and one-way ANOVA were used to analyze the causes of postoperative cough in lung cancer. RESULTS: Most issues occurred within 7 d post-discharge, significantly declined on 14 d post-discharge. Factors such as gender, smoking history, and surgical approaches were found to influence cough recovery. The incidence of cough on 7 d post-discharge in females was higher than that in males (P<0.01), while the incidence of cough on 14 d post-discharge in elderly patients was lower than that in young patients (P=0.03). The AI-based platform effectively addressed cough, pain, and sleep disturbances through phased interventions. CONCLUSIONS The AI-based platform significantly enhanced postoperative management efficiency and the self-care capabilities of the patients, particularly in phased cough management. Future integration with wearable devices could enable more precise and personalized postoperative care, further advancing the application of AI technology across multidisciplinary healthcare domains.
Humans ; Lung Neoplasms/rehabilitation* ; Male ; Female ; Middle Aged ; Aged ; Patient Discharge ; Artificial Intelligence ; Adult ; Postoperative Care ; Postoperative Period ; Disease Management ; Quality of Life