STATEMENT OF PROBLEM: At present, as the esthetic demands are on the increase, there are many ongoing studies for tooth-colored post and cores. Most of them are about fiber post and prefabricated zirconia post, but few about one-piece milled zirconia post and core using CAD/CAM (computer-aided design / computer-aided manufacturing) technique. PURPOSE: The objective of this study was to compare microleakage of endodontically treated teeth restored with three different tooth-colored post and cores. MATERIAL AND METHODS: Extracted 27 human maxillary incisors were cut at the cementoenamel junction, and the teeth were endodontically treated. Teeth were divided into 3 groups (n = 9); restored with fiber post and resin core, prefabricated zirconia post and heat - pressed ceramic core, and CAD/CAM milled zirconia post and core. After the preparation of post space, each post was cemented with dual-polymerized resin cement (Variolink II). Teeth were thermocycled for 1000 cycles between 5 - 55 degrees C and dyed in 2 percent methylene blue at 37 degrees C for 24 hours. Teeth were sectioned (bucco - lingual), kept the record of microleakage and then image-analyzed using a microscope and computer program. The data were analyzed by one-way ANOVA and Scheffe's multiple range test (alpha= 0.05). RESULTS: All groups showed microleakage and there were no significant differences among the groups (P > .05). Prefabricated zirconia post and heat-pressed ceramic core showed more leakage in dye penetration at the post - tooth margin, but there was little microleakage at the end of the post. Fiber post and resin core group and CAD/CAM milled zirconia post and core group indicated similar microleakage score in each stage. CONCLUSION: Prefabricated zirconia post and heat-pressed ceramic core group demonstrated better resistance to leakage, and fiber post and resin core group and CAD/CAM milled zirconia post and core group showed the similar patterns. The ANOVA test didn't indicate significant differences in microleakage among test groups. (P > .05)
Ceramics ; Hot Temperature ; Humans ; Incisor ; Methylene Blue ; Resin Cements ; Software ; Tooth ; Tooth Cervix ; Zirconium

PURPOSE: The purpose of this study is to evaluate and compare the shear bond strength of the gingiva-colored composite resin and the tooth-colored composite resin to porcelain, metal and zirconia. MATERIALS AND METHODS: Sixty cylindrical specimens were fabricated and divided into the following 6 groups (Group 1-W: tooth-colored composite bonded to porcelain, Group 1-P: gingiva-colored composite bonded to porcelain, Group 2-W: tooth-colored composite bonded to base metal, Group 2-P: gingiva-colored composite bonded to base metal, Group 3-W: toothcolored composite bonded to zirconia, Group 3-P: gingiva-colored composite bonded to zirconia). The shear bond strength was measured with a universal testing machine after thermocycling and the failure mode was noted. All data were analyzed using the two-way analysis of variance test and the Bonferroni post-hoc test at a significance level of 0.05. RESULTS: The mean shear bond strength values in MPa were 12.39, 13.42, 8.78, 7.98, 4.64 and 3.74 for Group 1-W, 1-P, 2-W, 2-P, 3-W and 3-P, respectively. The difference between the two kinds of composite resin was not significant. The shear bond strength of Group 1 was the highest and that of Group 3 was the lowest. The differences among Group 1, 2 and 3 were all significant (P<.05). CONCLUSION: The shear bond strength of the gingiva-colored composite was not less than that of the tooth-colored composite. Thus, repairing or fabricating ceramic restorations using the gingiva-colored composite resin can be regarded as a practical method. Especially, the prognosis would be fine when applied on porcelain surfaces.
Ceramics ; Collodion ; Dental Porcelain ; Prognosis ; Zirconium

No abstract available.

PURPOSE: The trueness and precision of acquired images of intraoral digital scanners could be influenced by restoration type, preparation outline form, scanning technology and the application of power. The aim of this study is to perform the comparative evaluation of the 3-dimensional reproducibility of intraoral scanners (IOSs). MATERIALS AND METHODS: The phantom containing five prepared teeth was scanned by the reference scanner (Dental Wings) and 5 test IOSs (E4D dentist, Fastscan, iTero, Trios and Zfx Intrascan). The acquired images of the scanner groups were compared with the image from the reference scanner (trueness) and within each scanner groups (precision). Statistical analysis was performed using independent two-samples t-test and analysis of variance (α=.05). RESULTS: The average deviations of trueness and precision of Fastscan, iTero and Trios were significantly lower than the other scanners. According to the restoration type, significantly higher trueness was observed in crown and inlay than in bridge. However, no significant difference was observed among four sites of preparation outline form. If compared by the characteristics of IOS, high trueness was observed in the group adopting the active triangulation and using powder. However, there was no significant difference between the still image acquisition and video acquisition groups. CONCLUSION: Except for two intraoral scanners, Fastscan, iTero and Trios displayed comparable levels of trueness and precision values in tested phantom model. Difference in trueness was observed depending on the restoration type, the preparation outline form and characteristics of IOS, which should be taken into consideration when the intraoral scanning data are utilized.
Crowns ; Dentists ; Humans ; Inlays ; Jupiter ; Tooth

We performed 70 proceudres of transarterial chemoembolization (TAE) through extrahepatic collateral vessels (n=27) or parasitic feeders (n=18) in 45 hepatocellular carcinoma patients. The collaterals developed after interruption of the hapatic artery due to repeated TAE(n=17), surgical ligation(n=7) and primary celiac occlusion (n=3). Radiologic findings suggesting the existence of parasitic or collateral supply for hepatocellular carcinoma were 1) a focal defect of Lipiodol retention on CT or plain film after TAE via the hepatic artery, 2) dilated and tortuous vessels around the mass on angiography, 3) persistent elevation of the level of serum alpha fetoprotein or continuous clinical symptoms in spite of sufficient devascularization of the tumor via the hepatic artery, and 4) radiological findings of direct invasion into adjacent organ. The sites of the catheter placement were the inferior phrenic artery (n=19), omental branches (n=16), periportal collaterals (n=6), pancreaticodenal arcade (n=3), gastroduodenal artery (n=3), internal mammary artery (n=2), intercostal artery (n=2), lateral thoracic artery (n=1), bronchial artery(n=1), and colic branches(n=1). Masses feeded by the inferior phrenic and chest wall collaterals were usually located at the dome area of the liver, and the omental and gastroduodenal collaterals developed in the masses located at the inferior tip of the liver. After TAE via collateral vessels, 37 patients underwent follow-up study. In 18 cases(48%), the tumor favorably responded to TAE. Specific complications of collateral TAE were epigastric soreness (n=10), severe shoulder pain (n=4), and embolization of the spinal artery during embolization through the intercostal artey (n=1). In conclusion, various extrahepatic collaterals are important alternative or additional routes for effective chemoembolization in patients with advanced hepatoma, and early recognition of the parasitic supply and the effort to perform TAE via collaterals is very important for effective management of the patients with the hepatoma.
alpha-Fetoproteins ; Angiography ; Arteries ; Carcinoma, Hepatocellular* ; Catheters ; Colic ; Ethiodized Oil ; Follow-Up Studies ; Hepatic Artery ; Humans ; Liver ; Mammary Arteries ; Shoulder Pain ; Thoracic Arteries ; Thoracic Wall

No abstract available.
Pulmonary Artery* ; Takayasu Arteritis*

Epithelioid smooth muscle tumor is relatively rare and potentially malignant, especially in retroperitoneum. Distinct criteria for malignancy still have not been clarified in this epithelioid variant arising in retroperitoneum. We report a deceptively benign-appearing epithelioid leiomyosarcoma in a 50-year-old female. She was admitted with abdominal discomfort and dysuria. Abdominal CT showed a well-demarcated, 10 10 cm sized, solid mass in retroperitoneum. Concomitant metastatic lesions were noted in right lung field. Surgical excision of retroperitoneal mass and right lung lobectomy were performed. The retroperitoneal mass showed yellowish-tan, well-delineated and lobulated appearance. Histologically, this tumor was composed of predominantly epithelioid, round to oval cells with distinct clear cytoplasm and slightly atypical nuclei. Mitosis was rare (0~1/50 HPF). Lung lesions were morphologically similar to that of retroperitoneum.
Cytoplasm ; Dysuria ; Female ; Humans ; Leiomyosarcoma* ; Lung ; Middle Aged ; Mitosis ; Smooth Muscle Tumor ; Tomography, X-Ray Computed

PURPOSE: The aim of this study was to evaluate the marginal and internal adaptation of monolithic zirconia restoration made without physical model by digital intraoral scanner. MATERIALS AND METHODS: A prospective clinical trial was performed on 11 restorations as a pilot study. The monolithic zirconia restorations were fabricated after digital intraoral impression taking by intraoral scanner (TRIOS, 3shape, Copenhagen, Denmark), computer-aided designing, and milling manufacturing process. Completed zirconia crowns were tried in the patients' mouth and a replica technique was used to acquire the crown-abutment replica. The absolute marginal discrepancy, marginal gap, and internal gap of axial, line angle, and occlusal part were measured after sectioning the replica in the mesiodistal and buccolingual direction. Statistical analysis was performed using Kruskal-Wallis and Mann-Whitney U test (α=.05). RESULTS: From the adaptation analysis by replica, the statistically significant difference was not found between mesiodistal and buccolingual sections (P>.05), but there was significant difference among the measurement location (P<.01). The amount of absolute marginal discrepancy was larger than those of marginal gap and internal gap (P<.01). CONCLUSION: Within the limitations of this study, the adaptation accuracy of model-free monolithic zirconia restoration fabricated by intraoral scanner exhibited clinically acceptable result. However, the margin of zirconia crown showed tendency of overcontour and cautious clinical application and follow up is necessary.
Computer-Aided Design ; Crowns ; Follow-Up Studies ; Mouth ; Pilot Projects ; Prospective Studies ; Replica Techniques

No abstract available.
Female ; Pregnancy ; Pregnancy, Ectopic*

OBJECTIVE: To evaluate the clinical profiles and outcomes of patients with placental abruption and the effect of hypertensive disorders on perinatal death. METHODS: It was a retrospective study over 9 years from 1 January 1995 to 31 December 2003. We reviewed the data of women (N=104) presenting placental abruption among 10,940 women who were delivered at this hospital. RESULTS: The incidence of placental abruption was 0.95% or one in 104 deliveries. Only 47.6% of these could be diagnosed before delivery. The most common symptom was vaginal bleeding (71.1%) and intrauterine fetal death had already occurred in 26.9%. Perinatal mortality rate was 32.6% including still birth (26.9%) and neonatal death (5.7%). There was no maternal death. 28.8% of placental abruption were associated with preeclampsia and other hypertensive disorders but in most cases (68.3%), the contributing factors could not be found. When the hypertensive disorders were associated, perinatal mortality rate was 33%, which was not significantly different when compared with perinatal mortality (32%) without hypertensive disorder (p>0.05). But the neonates from the hypertensive women were more growthly impaired than those from normotensive women (p<0.05). CONCLUSION: Hypertensive disorders was an important factor in women with placental abruption but in most cases the contributing factors could not be found. The hypertensive disorders did not aggravate the perinatal mortality but increased the rate of intrauterine growth retardation in placental abruption.
Abruptio Placentae* ; Female ; Fetal Death ; Fetal Growth Retardation ; Humans ; Incidence ; Infant, Newborn ; Maternal Death ; Parturition ; Perinatal Mortality ; Pre-Eclampsia ; Pregnancy* ; Retrospective Studies ; Uterine Hemorrhage