1.The Mechanism of Low Temperature Burn and Clinical Cases.
Seungsoo KIM ; Wansuk YANG ; Jeonghyun SIM ; Daewoo SUH ; Seunghyun BAIK ; Bongsoo BAIK
Journal of Korean Burn Society 2015;18(2):74-80
PURPOSE: This study was designed to better understand the mechanism of low temperature burn and to show clinical cases of low temperature burn. METHODS: The local temperature increase of electric pad was investigated at 4 different surface cooling conditions. Blocks (5x5x2 cm3) made of silicone rubber, aluminum, or urethane foam were placed on the top of the electric pad, and temperature between the blocks and electric pad was measured up to 7 hours after switching on maximally (level 7). Each block has different thermal conductivity (TC) and TC of silicone rubber (0.2 W/m.degrees C) is similar to TC of human skin (0.37 W/m.degrees C). TC of aluminum is higher and TC of urethane foam is lower than TC of human skin. Experiments were performed on two occasions with or without a blanket covering over the electric pad and blocks. RESULTS: The initial surface temperature (18degrees C) of the electric pad under the silicone rubber block was elevated to 36.5degrees C at 1 hour, 41.8degrees C at 3 hours, 44.2degrees C at 5 hours, and 45.5degrees C at 7 hours. After covering the electric pad and blocks with a blanket, the temperature of the electric pad under the silicone rubber block was elevated to 40.9degrees C at 1 hour, 51.8degrees C at 3 hours, 56.1degrees C at 5 hours and 58.1degrees C at 7 hours. Under the same conditions, surface temperatures under the urethane foam and aluminum blocks were 70.8degrees C and 50.degrees C respectively at 7 hours. CONCLUSION: The local temperature increase of electric pad was dependent on the surface cooling conditions, heating time and blanket covering over the electric pad. The surface temperature increased to 56.1degrees C at 5 hours after blanket covering over the silicone block which temperature can cause severe injuries on the human skin within a minute.
Aluminum
;
Beds
;
Burns*
;
Heating
;
Hot Temperature
;
Humans
;
Silicon
;
Silicone Elastomers
;
Silicones
;
Skin
;
Thermal Conductivity
;
Urethane
2.Change of Subjective Tinnitus by the Duration of Noise Exposure in Patients with Noise-Induced Hearing Loss.
Jeonghyun OH ; Ju Hwan SIM ; Sung Il CHO
Korean Journal of Otolaryngology - Head and Neck Surgery 2018;61(12):669-673
BACKGROUND AND OBJECTIVES: Tinnitus, a common complaint of workers who are exposed to noise, can cause substantial negative effects on the quality of life of these workers. The aim of this study was to analyze the characteristics of tinnitus in patients with noise-induced hearing loss and the relationship between tinnitus and the duration of noise exposure. SUBJECTS AND METHOD: Thirty-three patients with subjective tinnitus and noise-induced hearing loss were included in this study. Tinnitus questionnaire, Tinnitus Handicap Inventory (THI) and audiological examinations were investigated according to the duration of noise exposure. RESULTS: There was a significant correlation between the tinnitus loudness and the duration of noise exposure. Patients who had longer periods of noise exposure had a louder tinnitus and higher THI score. However, there is no significant correlation between the characteristics of tinnitus and aging process. CONCLUSION: The duration of noise exposure influences the loudness and distress of tinnitus. An awareness of tinnitus should be considered as part of hearing conservation program.
Aging
;
Hearing
;
Hearing Loss
;
Hearing Loss, Noise-Induced*
;
Humans
;
Methods
;
Noise*
;
Quality of Life
;
Tinnitus*