Thirty-nine cases of tuberculosis of the knee were treated at the Department of Orthopaedic Surgery, National Medical Center during the 10 yesrs from Jsn. 1977 to Dec. 1986. The results were as followings 1) Total cases of tuberculosis of bone and joint were 411. Among them, knee joint occupied 39 cases (9.5%) 2) Age and sex distribution were not remarkable. 3) Average duration of disease were 27 months. 4) In 56.1% of the pstients, chemotherapy wss given prior to admission. 5) Tbe main associated tuberculosis lesions were pulmonsry tuberculosis (53.9%). 6) Erythrocyte sedimentation rate was increased in 61.6%. 7) The incidence of associated running draining sinus were 25.6%, and majority of the causative microorganisrn was Staphylococcus aureus in complicated mixed infection. 8) Various treatment, such as conservative, synovectomy, curettage, and arthrodesis, had been carried out. 9) Overall recurrence rate was 9.1%.
Arthrodesis ; Blood Sedimentation ; Clinical Study ; Coinfection ; Curettage ; Drug Therapy ; Incidence ; Joints ; Knee Joint ; Knee ; Recurrence ; Running ; Sex Distribution ; Staphylococcus aureus ; Tuberculosis

The purpose of this study was to evaluate the color changes of the composite resin resulting from xenon lamp exposure in different environments. Composite resin (Z 250 ; shade A1, A2, A3, A3.5, and A4) were applied in a cylindrical metal mold. Seventy five specimens according to environments of exposure were made as follows; Group I: aluminum foiling of the specimens in the air at 37degrees C for 1 day and 7 days. Group II: exposure of xenon lamp to the specimens in the air at 37degrees C for 1 day and 7 days. Group III: exposure of xenon lamp to the specimens in distilled water at 37degrees C for 1 day and 7 days. The color characteristics (L*,a*,b*) of the specimens before and after exposure of xenon lamp were measured by spectrophotometer and the total color differences (DeltaE*) were computed. The results obtained were as follows: 1. In all groups except A1 shade of group III, the DeltaE* values presented below 2.0, and group III showed the highest DeltaE* values followed by group II and group I in a decreasing order(p<0.05). 2. In all shades and groups, the more the exposure time of xenon lamp and the lighter the shade were, the higher the tendency for discoloration (p<0.05). 3. The composite resins which was exposed to xenon lamp in the distilled water was more discolored than those in the air (p<0.05). 4. The major changes of composite resins which were exposed to xenon lamp in the air were an increase in yellowness through a positive shift of the b* value, and those in the distilled water were an increase in darkness and yellowness through a negative shift of the L* value and a positive shift of the b* value.
Aluminum ; Composite Resins* ; Darkness ; Fungi ; Water ; Xenon*

The purpose of this study was to evaluate the difference of surface roughness of composite resin according to composite resin type, polishing methods, and use of resin sealant. Two hundred rectangular specimens, sized 8 x 3 x 2 mm, were made of Micro-new (Bisco, Inc., Schaumburg, IL, U.S.A) and Filtek Supreme (3M ESPE Dental Products, St. Paul, MN, U.S.A.), and divided into two groups; Micronew-M group, Filtek Supreme-S group. Specimens for each composite group were subdivided into five groups by finishing and polishing instruments used; M1 & S1 (polyester strip), M2 & S2 (Sof-Lex disc), M3 & S3 (Enhance disc and polishing paste), M4 & S4 (Astropol), and M5 & S5 (finishing bur). Polished groups were added letter B after the application of resin surface sealant (Biscover), eg, M1B and S1B. After specimens were stored with distilled water for 24 hr, average surface roughness (Ra) was taken using a surface roughness tester. Representative specimens of each group were examined by FE-SEM (S-4700: Hitachi High Technologies Co., Tokyo, Japan). The data were analysed using paired t-test, ANOVA and Duncan's tests at the 0.05 probability level. The results of this study were as follows; 1. The lowest Ra was achieved in all groups using polyester strip and the highest Ra was achieved in M5, S5 and M5B groups using finishing bur. On FE-SEM, M1 and S1 groups provided the smoothest surfaces, M5 and S5 groups were presented the roughest surfaces and voids by debonding of filler on the polished specimens. 2. There was no significant difference in Ra between Micronew and Filtek Supreme before the application of resin sealant, but Micronew was smoother than Filek Supreme after the application of resin sealant. 3. There was significant corelation between Ra of type of composite resin and polishing methods before the application of resin sealant (p = 0.000), but no significant interaction between them after the application of resin sealant. On FE-SEM, most of composite resin surfaces were smooth after the application of resin sealant on the polished specimens. 4. Compared with before and after the application of resin sealant in group treated in the same composite and polishing methods, Ra of M4B and M5B was statistically lower than that of M4 and M5, and S5B was lower than that of S5, respectively (p < 0.05). In conclusion, surface roughness by polishing instruments was different according to type of composite resin. Overall, polyester strip produced the smoothest surface, but finishing bur produced the roughest surface. Application of resin sealant provided the smooth surfaces in specimens polished with Enhance, Astropol and finishing bur, but not provided them in specimens polished with Sof-Lex disc.
Polyesters ; Water

The purpose of this study was to compare in vitro interfacial relationship of restorations bonded with three self-etching primer adhesives and one self-etching adhesive. Class I cavity preparations were prepared on twenty extracted human molars. Prepared teeth were divided into four groups and restored with four adhesives and composites: Clearfil SE Bond/Clearfil(TM) AP-X (SE), UniFil Bond/UniFil(R) F (UF), FL Bond/Filtek(TM) Z 250 (FL) and Prompt L-Pop/Filtek(TM) Z 250 (LP) After storing in distilled water of room temperature for 24 hours, the specimens were vertically sectioned and decalcified. Morphological patterns between the enamel/dentin and adhesives were observed under SEM. The results of this study were as follows; 1. They showed close adaptation between enamel and SE, UF and FL except for LP. 2. The hybrid layer in dentin was 2 microm thick in SE, 1.5 microm thick in UF, and 0.4 microm in both FL and LP. So, the hybrid layers of SE and UF were slightly thicker than that of FL and LP. 3. The lengths and diameters of resin tags in UF and FL were similar, but those of LP were slightly shorter and slenderer than those of SE. 4. The resin tags were long rod shape in SE, and funnel shape in other groups. Within the limitations of this study, it was concluded that self-etching primer adhesives showed close adaptation on enamel. In addition, the thickness of hybrid layer ranged from 0.4-1.5 microm between adhesives and dentin. The resin tags were long rod or funnel shape, and dimension of them was similar or different among adhesives.
Adhesives* ; Dental Enamel ; Dentin ; Humans ; Molar ; Tooth* ; Water

The purpose of this study was to compare shear bond strength and interfacial pattern of composite bonded to dentin using self-etching adhesive systems. Sixty extracted human molars with exposed occlusal dentin were divided into four groups and bonded with four adhesives and composites: Single Bond/Filtek Z 250(SB), Tyrian SPE-One-Step Plus/Aelitefil(TY), Prompt L-Pop/Filtek Z 250(LP), and One-Up Bond F/Palfique Toughwell(OU). The results of this study were as follows; 1. Shear bond strength for OU was significantly lower than that of other groups(p<0.05). No significant difference was founded among SB, TY, and LP. 2. Failure modes to dentin showed adhesive and mixed for SB, TY, and LP, but them for OU showed adhesive in all spceimens. 3. Dentin-resin interface showed close adaptation for SB, TY, and LP, but it showed gap for OU. 4. The hybrid layers for TY, LP, OU were thinner than that of SB. Adhesive layers were observed between composite and hybrid layer, which were 5 microm thick for TY and 10 microm thick for OU.
Adhesives* ; Dentin* ; Humans ; Molar

This study was made to evaluate the effect of oral atenolol, a cardioselective beta-adrenergic blocking agent without intrinsic sympathomimetic activity, on left ventricular function in patient with essential hypertension. Atenolol, 100mg/day, was given to 11 hypertensive patients for 4 weeks, and its effects on arterial pressure, pulse rate, left ventricular dimensions and ejection phase indices of myocardial performance were examined by echocardiography. Echocardiographic studies were performed before treatment and after 4 weeks of atenolol therapy. Arterial pressure fell form 145/90 mmHg to 138/84mmHg after 4 weeks. Pulse rate fell significantly from 69/min to 58/min(p<0.05). Left ventricular end-diastolic and end-systolic dimensions and mean rate of circumferential fiber shortening(mVcf) did not change significantly. Ejection fraction increased significantly from 0.66 to 0.72(p=0.01). This results indicate that atenolol in the resting state has no depressant effect on left ventricular function in patients with essential hypertension.
Arterial Pressure ; Atenolol* ; Echocardiography ; Heart Rate ; Humans ; Hypertension* ; Ventricular Function, Left*

BACKGROUND: To determine whether nitric oxide (NO) could inhibit activation of platelets stored in a cold or frozen state, we measured platelet P-selectin expression and platelet-bound fibrinogen in platelet-rich plasma (PRP) with S-nitrosoglutathione (GSNO) (Sigma, USA) by flow cytometry. METHODS: PRP was prepared by centrifuging venous blood collected in a 3.2% sodium citrate tube from 10 healthy donors. It was aliquotted into 4 groups (no cryoprotectant, GSNO, GSNO/dimethyl sulfoxide [DMSO] [Sigma], and DMSO), and stored at room, cold and freezing temperatures for 24 hrs. We performed a flow cytometric analysis of all specimens stained with FITC-fibrinogen and PE-CD62P monoclonal antibodies (Becton Dickinson, USA). The results were compared according to the storage temperature and agonist among 4 groups. RESULTS: GSNO inhibited significantly the activation of frozen platelets, but not in the presence of DMSO. GSNO was also shown to preserve the aggregability of frozen platelets because in the presence of GSNO the delta percent change of P-selectin expression and fibrinogen binding of frozen platelets increased significantly irrelevant to DMSO. CONCLUSIONS: GSNO inhibited the activation of frozen platelets and preserved the platelet aggregability; therefore, it may be used as a protectant for platelet cryopreservation.
Adult ; Blood Platelets/*drug effects/metabolism ; Cryopreservation/*methods ; Female ; Fibrinogen/metabolism ; Flow Cytometry ; Free Radical Scavengers/pharmacology ; Humans ; Male ; Nitric Oxide/metabolism ; Nitric Oxide Donors/*pharmacology ; P-Selectin/metabolism ; Platelet Aggregation/drug effects ; Platelet Aggregation Inhibitors/pharmacology ; S-Nitrosoglutathione/*pharmacology

OBJECTIVES: The purpose of this study was to compare the microshear bond strength (uSBS) to enamel prepared with different burs and to determine what type of bur were chosen when a self-etching primer adhesive was used. MATERIALS AND METHODS: Enamel of forty-two human molars were used. They were divided into one of six groups (n = 7), Group 1, coarse (125 - 150 microm) diamond bur; Group 2, standard (106 - 125 microm) diamond bur; Group 3, fine (53 - 63 microm) diamond bur; Group 4, extrafine (20 - 30 microm) diamond bur; Group 5, plain-cut carbide bur (no. 245); Group 6, cross-cut carbide bur (no. 557). Clearfil SE Bond and Clearfil AP-X (Kuraray Medical Inc.) was bonded to enamel surface. The bonded specimens were subjected to uSBS testing. RESULTS: The uSBS of Group 4 was the highest among groups and it was significantly higher than that of Groups 1, 2, 3, and 6 (p < 0.05), but it was not significantly different from that of Group 5. CONCLUSIONS: Different burs used on enamel surface affected the microshear bond strengths of a self-etching primer adhesive to the enamel surface. In the case of Clearfil SE Bond, extrafine diamond and plain-cut carbide bur are recommended for bonding to enamel.
Adhesives ; Dental Enamel ; Diamond ; Humans ; Methacrylates ; Molar ; Resin Cements

BACKGROUND: CC chemokine receptor (CCR) 7 and cognate CCR7 ligands, CCL21 (formerly secondary lymphoid tissue chemokine [SLC]) and CCL19 (formerly Epstein-Barr virus-induced molecule 1 ligand chemokine [ELC]), were known to establish microenvironment for the initiation of immune responses in secondary lymphoid tissue. As described previously, coadministration of DNA vaccine with CCR7 ligand-encoding plasmid DNA elicited enhanced humoral and cellular immunity via increasing the number of dendritic cells (DC) in secondary lymphoid tissue. The author hypothesized here that CCR7 ligand DNA could effectively expand memory CD4+ T cells to protect from viral infection likely via increasing DC number. METHODS: To evaluate the effect of CCR7 ligand DNA on the expansion of memory CD4+ T cells, DO11.10.BALB/c transgenic (Tg)-mice, which have highly frequent ovalbumin (OVA)(323-339) peptide-specific CD4+ T cells, were used. Tg-mice were previously injected with CCR7 ligand DNA, then immunized with OVA(323-339) peptide plus complete Freund's adjuvant. Subsequently, memory CD4+ T cells in peripheral blood lymphocytes (PBL) were analyzed by FACS analysis for memory phenotype (CD44(high) and CD62(Llow)) at memory stage. Memory CD4+ T cells recruited into inflammatory site induced with OVA-expressing virus were also analyzed. Finally, the protective efficacy against viral infection was evaluated. RESULTS: CCR7 ligand DNA-treated Tg-mice showed more expanded CD44(high) memory CD4+ T cells in PBL than control vector-treated animals. The increased number of memory CD4+ T cells recruited into inflammatory site was also observed in CCR7 ligand DNA-treated Tg-mice. Such effectively expanded memory CD4+ T cell population increased the protective immunity against virulent viral infection. CONCLUSION: These results document that CCR7 and its cognate ligands play an important role in intracellular infection through establishing optimal memory T cell. Moreover, CCR7 ligand could be useful as modulator in DNA vaccination against viral infection as well as cancer
Animals ; Chemokine CCL19 ; Chemokine CCL21 ; Dendritic Cells ; DNA ; Freund's Adjuvant ; Immunity, Cellular ; Ligands* ; Lymphocytes ; Lymphoid Tissue ; Memory* ; Ovalbumin ; Phenotype ; Plasmids ; Receptors, CCR ; T-Lymphocytes* ; Vaccination

OBJECTIVES: The purpose of this study was to compare the microshear bond strength (uSBS) of two total-etch and four self-etch adhesive systems and a flowable resin to enamel. MATERIALS AND METHODS: Enamels of sixty human molars were used. They were divided into one of six equal groups (n = 10) by adhesives used; OS group (One-Step Plus), SB group (Single Bond), CE group (Clearfil SE Bond), TY group (Tyrian SPE/One-Step Plus), AP group (Adper Prompt L-Pop) and GB group (G-Bond). After enamel surfaces were treated with six adhesive systems, a flowable composite resin (Filek Z 350) was bonded to enamel surface using Tygon tubes. the bonded specimens were subjected to uSBS testing and the failure modes of each group were observed under FE-SEM. RESULTS: 1. The uSBS of SB group was statistically higher than that of all other groups, and the uSBS of OS, SE and AP group was statistically higher than that of TY and GB group (p < 0.05). 2. The uSBS for TY group was statistically higher than that for GB group (p < 0.05). 3. Adhesive failures in TY and GB group and mixed failures in SB group and SE group were often analysed. One cohesive failure was observed in OS, SB, SE and AP group, respectively. CONCLUSIONS: Although adhesives using the same step were applied the enamel surface, the uSBS of a flowable resin to enamel was different.
Adhesives ; Composite Resins ; Dental Enamel ; Humans ; Molar