PURPOSE: The management of fractures of mandibular subcondyle continues to be controversial over open and closed treatment. The purpose of this article is to explain the endoscopic assisted open reduction and internal fixation and minimize the controversy. METHODS: For nine patients, mandibular subcondylar fracture were reduced and fixed by using intraoral endoscopic-assisted open reduction and internal fixation and were followed up for 14 - 24 months after the surgery. RESULTS: Eight patients of mandibular subcondylar fracture had been treated without significant complications. One patient, whose malocclusion had been remained, was recovered normal occlusion by maxillomandibular fixation using intermaxillary screws for 3 weeks. CONCLUSION: The advantages of endoscopic-assisted open reduction and internal fixation are direct visualization, accurate fracture repair, minimized scar, decreased morbidity. And maxillomandibular fixation is not needed when it is done by accurate reduction and rigid fixation with one miniplate in the region of subcondylar fracture. With the above consideration, endoscopic-assisted open reduction and internal fixation can be considered as one of the best treatments for subcondylar fracture of the mandible.
Cicatrix ; Humans ; Jaw Fixation Techniques ; Malocclusion ; Mandible

Maxillomandibular fractures usually require intermaxillary fixation as a means to immobilize and stabilize the fracture and to re-establish proper occlusion. Arch bars or intermaxillary fixation screws cannot be used for edentulous patients or for patients who have poor dental health. Here, we present a case of repeated intermaxillary fixation failure in a patient weak alveolar rigidity secondary to multiple dental implants. Because single-point fixation screws were not strong enough to maintain proper occlusion, we have used Y-shaped plates to provide more rigid anchoring points for the intermaxillary wires. We suggest that this method should be considered for patients in whom conventional fixation methods are inappropriate or have failed.
Dental Implants ; Humans ; Jaw Fixation Techniques ; Mandible ; Mandibular Reconstruction

OBJECTIVES: To compare the clinical and radiological outcomes after closed reduction (CR) and open reduction and internal fixation (ORIF) in the management of subcondylar fractures. MATERIALS AND METHODS: Forty-eight patients presenting with subcondylar fracture between January 2010 and March 2013 were evaluated retrospectively. Fifteen patients were treated with CR and 33 patients with ORIF. The clinical and radiologic parameters were evaluated during follow-up (mean, 7.06 months; range, 3 to 36 months). RESULTS: In the CR group, no patients had any problems with regard to the clinical parameters. The average period of maxillomandibular fixation (MMF) was 5.47 days. The preoperative average tangential angulation of the fractured fragment was 3.67degrees, and loss of ramus height was 2.44 mm. In the ORIF group, no clinical problems were observed, and the average period of MMF was 6.33 days. The preoperative average tangential angulation of the subcondylar fragment was 8.66degrees, and loss of ramus height was 3.61 mm. CONCLUSION: CR provided satisfactory clinical results, though ORIF provided more accurate reduction of the fractured fragment. So there is no distinct displacement of fractured fragment, CR should be selected than ORIF because of no need for surgery.
Follow-Up Studies ; Humans ; Jaw Fixation Techniques ; Retrospective Studies

fixation using single non-compression 2.0 mm miniplate and screws through transoral incision. Clinical and radiological examinations were undertaken during follow-up period. Six patients(6%) experienced complications and required secondary surgical intervention; 3 cases of screw loosening, 2 cases of plate fracture and 1 case of infection. 5 cases were treated with plate remove and healed uneventually and one patient who had plate fracture was treated with maxillomandibular fixation without surgical intervention. However, these complications were minor, so we could treat these patients in the office without hospitalization. None of these patients had additional complications after secondary interventions. The use of single non-compression miniplate for treatment of mandibular angle fractures is a simple, reliable technique and we could manage small number of complications in the outpatient setting.]]>
Follow-Up Studies ; Hospitalization ; Humans ; Jaw Fixation Techniques ; Outpatients

Jaw Fixation Techniques ; Mandibular Condyle ; Mandibular Fractures ; Mouth

Nasotracheal intubation should be performed in patients with jaw fractures because maxillomandibular fixation is required. However, when there are concomitant fractures of the nose and facial bones, an intubation tube positioned at the nose makes it difficult to perform an intricate surgery. In order to overcome these problems, a variety of ways to change the position of the tube have been introduced. We describe a simple technique of switching the tube from a nasal to oral position, which was easily executed in a patient with concomitant nasal and mandibular fractures, accompanied by a literature review.
Airway Management ; Facial Bones ; Humans ; Intubation* ; Jaw Fixation Techniques ; Jaw Fractures ; Mandibular Fractures ; Nose

Conservative or surgical methods have been used for the treatment of fracture of mandibular subcondyle, but consensus has not been reached in regard to the proper management of this injury. Several problems related to the surgical procedure have led many surgeons to avoid surgical management of condylar fractures in favor of closed reduction and intermaxillary fixations. However, luxation of the condyle may lead to various long-term complications such as open bite on the contralateral side, dysfunction, deviation in opening and closing movements, as well as bone apposition leading to ankylosis. As a consequence, open reduction is preferable when the condyle is displaced. Various methods-for example, direct wiring technique, simple bone plating, dynamic compression plating-have been advocated for the treatment of fracture of mandibular subcondyle. Of such methods, a functionally-stable osteosynthesis can be achieved by compression osteosynthesis methods. Lag screw osteosynthesis is essentially a form of compression osteosynthesis in which the bone fragments are bound to one another as a result of traction from the screw. An advantage of compression osteosynthesis is that the end of a fractured bone can be maintained in an opposed position under pressure, and then primary bone healing occurs by direct osteoblastic activity within the fracture. As well, it obviates or reduces the need for maxillomandibular fixation, as well as the morbidity associated with conventional treatment methods such as facial nerve injury and bone resorption due to wide dissection. We have treated 9 cases of displaced subcondylar fractures of the mandible with the lag screw fixation system which is marketed by the Martin corporation. Mobilization and guidance of the jaw was begun from 7 or 10 days postoperatively. The radiologic and clinical evaluations showed good repositioning of the fragments and good occlusion postoperatively The disadvantage is that surgical procedures are relatively compound, and an additional procedure - removal of lag screw - is necessary after complete bone union. Lag screw osteosynthesis can be added as a another valid armament for plastic surgeons in the management of mandibular subcondyle fractures.
Ankylosis ; Bone Resorption ; Consensus ; Facial Nerve Injuries ; Jaw ; Jaw Fixation Techniques ; Mandible ; Open Bite ; Osteoblasts ; Traction

The management of mandibular angle fractures is often challenging and results in the highest complication rate among fractures of the mandible. In addition, the optimal treatment modality for angle fractures remains controversial. Traditional treatment protocols for angle fractures have involved rigid fixation with intraoperative maxillomandibular fixation (MMF) to ensure absolute stability. However, more recently, non-compression miniplates have gained in popularity and the use of absolute intraoperative MMF as an adjunct to internal fixation has become controversial. In this article, the history of, and current trends in, the treatment of mandibular angle fractures will be briefly reviewed. In addition, issues regarding the management of the third molar tooth will be discussed.
Clinical Protocols ; Fracture Fixation, Internal ; Jaw Fixation Techniques ; Mandible ; Mandibular Fractures ; Molar, Third ; Tooth

OBJECTIVES: The aim of this study was to compare the mechanical resistance of four different osteosyntheses modeled in two different sagittal split ramus osteotomy (SSRO) designs and to determine the linear loading in a universal testing machine. MATERIALS AND METHODS: An in vitro experiment was conducted with 40 polyurethane hemimandibles. The samples were divided into two groups based on osteotomy design; Group I, right angles between osteotomies and Group II, no right angles between osteotomies. In each group, the hemimandibles were distributed into four subgroups according to the osteosynthesis method, using one 4-hole 2.0 mm conventional or locking plate, with or without one bicortical screw with a length of 12.0 mm (hybrid technique). Each subgroup contained five samples and was subjected to a linear loading test in a universal testing machine. RESULTS: The peak load and peak displacement were compared for statistical significance using PASW Statistics 18.0 (IBM Co., USA). In general, there was no difference between the peak load and peak displacement related to osteotomy design. However, when the subgroups were compared, the osteotomy without right angles offered higher mechanical resistance when one conventional or locking 2.0 mm plate was used. One locking plate with one bicortical screw showed higher mechanical resistance (162.72±42.55 N), and these results were statistically significantly compared to one conventional plate with monocortical screws (P=0.016) and one locking plate with monocortical screws (P=0.012). The difference in peak displacement was not statistically significant based on osteotomy design or internal fixation system configuration. CONCLUSION: The placement of one bicortical screw in the distal region promoted better stabilization of SSRO. The osteotomy design did not influence the mechanical behavior of SSRO when the hybrid technique was applied.
In Vitro Techniques ; Jaw Fixation Techniques ; Methods ; Orthognathic Surgery ; Osteotomy ; Osteotomy, Sagittal Split Ramus* ; Polyurethanes

In the treatment of mandibular condyle fracture, conservative treatment using closed reduction or surgical treatment using open reduction can be used. Management of mandibular condylar fractures remains a source of ongoing controversy in oral and maxillofacial trauma. For each type of condylar fracture,the treatment method must be chosen taking into consideration the presence of teeth, fracture height, patient'sadaptation, patient's masticatory system, disturbance of occlusal function, and deviation of the mandible. In the past, closed reduction with concomitant active physical therapy conducted after intermaxillary fixation during the recovery period had been mainly used, but in recent years, open treatment of condylar fractures with rigid internal fixation has become more common. The objective of this review was to evaluate the main variables that determine the choice of an open or closed method for treatment of condylar fractures, identifying their indications, advantages, and disadvantages, and to appraise the current evidence regarding the effectiveness of interventions that are used in the management of fractures of the mandibular condyle.
Jaw Fixation Techniques ; Mandible ; Mandibular Condyle ; Mandibular Fractures ; Motion Therapy, Continuous Passive ; Stomatognathic System ; Tooth