PURPOSE: This study was done to identify the mediating effect of person-environment fit on the relationships between calling and job satisfaction for nurses in small and medium size general hospitals. METHODS: A cross-sectional survey was used and data were collected in April 2018. Participants were 117 nurses in two small and medium size general hospitals. Data were analyzed using descriptive statistics, Pearson correlation coefficients and hierarchical multiple regression with SPSS/WIN 22.0. RESULTS: There were statistically significant positive correlations among calling, person-environment fit, and job satisfaction. Hierarchical multiple regression analysis revealed that calling and person-environment fit explained 35% of job satisfaction. Also, person-environment fit had a total mediating effect on the relationship between calling and job satisfaction. CONCLUSION: Findings indicate that calling and person-environment fit are important factors for job satisfaction of nurses in small and medium size hospitals.
Cross-Sectional Studies ; Hospitals, General ; Job Satisfaction ; Negotiating

PURPOSE: This study was done to identify the mediating effect of resilience on the relationship between nurse's character and happiness for nurses in general hospitals. METHODS: Participants were 139 nurses working in general hospitals. A survey was used and data were collected in April 2019. Data were analyzed using the IBM SPSS/WIN 22.0 program. RESULTS: The significant predictors for the happiness of nurses were nurse's character (β=.56) and resilience (β=.80). These variables explained 67% of the variance in happiness of nurses. Also, resilience had a total mediating effect on the relationship between nurse's character and happiness. CONCLUSION Findings indicate that nurse's character and resilience are important factors for the happiness of nurses in general hospitals.

Internal jugular veins are the most frequently accessed site for central venous catheterization in patient management, whereas complications involving vertebral veins are a rare occurrence. Case: A 73-year-old male suspected to have a urothelial carcinoma was scheduled for elective left nephroureterectomy. During central venous catheterization using the anatomic landmark technique to target the internal jugular vein, a guidewire is inadvertently inserted into the suspected vertebral vein. Following the correction of the catheterization, a radiologist reviewed the preoperative enhanced computed tomography and confirmed that the initially punctured vessel was the vertebral vein. On the third day after surgery, the central venous catheter was removed, and the patient did not exhibit any complications, such as bleeding, swelling, and neurological symptoms. Conclusions: The use of ultrasonography during central venous catheterization is recommended to evaluate the anatomy of the puncture site and prevent misinsertion of the catheter, which can lead to several complications.

BACKGROUND: Automated cellular analyzers are expected to improve the analytical performance in body fluid (BF) analysis. We evaluated the analytical performance of three automated cellular analyzers and established optimum reflex analysis guidelines. METHODS: A total of 542 BF samples (88 cerebrospinal fluid [CSF] samples and 454 non-CSF samples) were examined using manual counting and three automated cellular analyzers: UniCel DxH 800 (Beckman Coulter), XN-350 (Sysmex), and UF-5000 (Sysmex). Additionally, 2,779 BF analysis results were retrospectively reviewed. For malignant cell analysis, the receiver operating characteristic (ROC) curve was used, and the detection of high fluorescence-BF cells (HF-BFs) using the XN-350 analyzer was compared with cytology results. RESULTS: All three analyzers showed good agreement for total nucleated cell (TNC) and red blood cell (RBC) counts, except for the RBC count in CSF samples using the UniCel DxH 800. However, variable degrees of differences were observed during differential cell counting. For malignant cell analysis, the area under the curve was 0.63 for the XN-350 analyzer and 0.76 for manual counting. We established our own reflex analysis guidelines as follows: HF-BFs <0.7/100 white blood cells (WBCs) is the criterion for quick scans with 100× magnification microscopic examination as a rule-out cut-off, while HF-BFs >83.4/100 WBCs or eosinophils >3.8% are the criteria for mandatory double check confirmation with 1,000× magnification examination. CONCLUSIONS The three automated analyzers showed good analytical performances. Application of reflex analysis guidelines is recommended for eosinophils and HF-BFs, and manual confirmation is warranted.

Some information was missing in the original version of this article.

BACKGROUND AND PURPOSE: Recent advances in information technology have created opportunities for advances in the management of stroke. The objective of this study was to test the feasibility of using a smartphone software application (app) for the management of vascular risk factors in patients with stroke. METHODS: This prospective clinical trial developed a smartphone app, the 'Korea University Health Monitoring System for Stroke: KUHMS2,' for use by patients with stroke. During a 6-month follow-up period, its feasibility was assessed by measuring the changes in their vascular risk-factor profiles and the number of days per patient with data registration into the app. The effect of the app on the achievement rate of risk-factor targets was assessed by classifying subjects into compliant and noncompliant groups. RESULTS: At the end of the trial, data on 48 patients were analyzed. The number of days on which data were registered into the app was 60.42+/-50.17 (mean+/-standard deviation). Among predefined vascular risk factors, the target achievement rate for blood pressure and glycated hemoglobin (HbA1c) improved significantly from baseline to the final measurement. The serial changes in achievement rates for risk-factor targets did not differ between the compliant and noncompliant groups. CONCLUSIONS: Many challenges must be overcome before mobile apps can be used for patients with stroke. Nevertheless, the app tested in this study induced a shift in the risk profiles in a favorable direction among the included stroke patients.
Blood Pressure ; Delivery of Health Care ; Follow-Up Studies ; Hemoglobin A, Glycosylated ; Humans ; Mobile Applications* ; Prospective Studies ; Risk Factors* ; Stroke ; Smartphone

The purpose of this study was to evaluate the effect of the reaction between investment material and zirconia on the strength of zirconia in the application of heat-pressing method. Sixty specimens were cut (24 mm×4 mm×0.5 mm) into plates from Zirtooth ™ Multi O-9814 block (∅98×14T, HASS, Gangwondo, Korea) and sintered at 1450℃. Specimens were divided into 6 subgroups according to the depending on the investement material; (a) UN group (Control), (b) PH group (Prime vest HS), (c) CP group (Calibra-press), (d) BV group (BC-Vest), (e) MH group (Microstar-HS), (f) F1 group (Formula 1). Five investment materials were buried according to the procedure recommended by the manufacturer and left at room temperature for 30 minutes. The investment mold was dried and maintained at an elevated temperature of 850℃ for 50 minutes. Then, Amber Lisi-POZ LT (HASS) was placed in a thermoformed electric furnace (Programat EP3000/G2, Ivoclar Vivadent, Schaan, Liechtenstein) together with the mold, heated to 915℃ at an elevation temperature of 45℃/min, and moored for 15 minutes. The specimens were loaded to fracture in a universal testing machine and the fracture surface was examined by a field-emission scanning electron microscopy (FE-SEM). The surface of the zirconia specimen with the investment material was analyzed by energy dispersive X-ray spectroscopy (EDS). The 3-point flexural strength test showed the highest value (1265.5 MPa) in the UN group and the lowest value (756.1 MPa) in the F1 group. As a result of EDS analysis, the largest amount of Si was detected in the F1 group, and the most interfacial changes occurred as a result of FE-SEM analysis. It was concluded that when the zirconia is buried with the investment material and the heat press molding is performed, the state of the interface is changed due to the investment material at the bonding interface while the strength is lowered.

The purpose of this study was to evaluate the effect of the reaction between investment material and zirconia on the strength of zirconia in the application of heat-pressing method. Sixty specimens were cut (24 mm×4 mm×0.5 mm) into plates from Zirtooth ™ Multi O-9814 block (∅98×14T, HASS, Gangwondo, Korea) and sintered at 1450℃. Specimens were divided into 6 subgroups according to the depending on the investement material; (a) UN group (Control), (b) PH group (Prime vest HS), (c) CP group (Calibra-press), (d) BV group (BC-Vest), (e) MH group (Microstar-HS), (f) F1 group (Formula 1). Five investment materials were buried according to the procedure recommended by the manufacturer and left at room temperature for 30 minutes. The investment mold was dried and maintained at an elevated temperature of 850℃ for 50 minutes. Then, Amber Lisi-POZ LT (HASS) was placed in a thermoformed electric furnace (Programat EP3000/G2, Ivoclar Vivadent, Schaan, Liechtenstein) together with the mold, heated to 915℃ at an elevation temperature of 45℃/min, and moored for 15 minutes. The specimens were loaded to fracture in a universal testing machine and the fracture surface was examined by a field-emission scanning electron microscopy (FE-SEM). The surface of the zirconia specimen with the investment material was analyzed by energy dispersive X-ray spectroscopy (EDS). The 3-point flexural strength test showed the highest value (1265.5 MPa) in the UN group and the lowest value (756.1 MPa) in the F1 group. As a result of EDS analysis, the largest amount of Si was detected in the F1 group, and the most interfacial changes occurred as a result of FE-SEM analysis. It was concluded that when the zirconia is buried with the investment material and the heat press molding is performed, the state of the interface is changed due to the investment material at the bonding interface while the strength is lowered.

Background: Flow cytometric immunophenotyping of hematolymphoid neoplasms (FCIHLN) is essential for diagnosis, classification, and minimal residual disease (MRD) monitoring. FCI-HLN is typically performed using in-house protocols, raising the need for standardization. Therefore, we surveyed the current status of FCI-HLN in Korea to obtain fundamental data for quality improvement and standardization. Methods: Eight university hospitals actively conducting FCI-HLN participated in our survey.We analyzed responses to a questionnaire that included inquiries regarding test items, reagent antibodies (RAs), fluorophores, sample amounts (SAs), reagent antibody amounts (RAAs), acquisition cell number (ACN), isotype control (IC) usage, positiveegative criteria, and reporting. Results: Most hospitals used acute HLN, chronic HLN, plasma cell neoplasm (PCN), and MRD panels. The numbers of RAs were heterogeneous, with a maximum of 32, 26, 12, 14, and 10 antibodies used for acute HLN, chronic HLN, PCN, ALL-MRD, and multiple myeloma-MRD, respectively. The number of fluorophores ranged from 4 to 10. RAs, SAs, RAAs, and ACN were diverse. Most hospitals used a positive criterion of 20%, whereas one used 10% for acute and chronic HLN panels. Five hospitals used ICs for the negative criterion. Positiveegative assignments, percentages, and general opinions were commonly reported. In MRD reporting, the limit of detection and lower limit of quantification were included. Conclusions This is the first comprehensive study on the current status of FCI-HLN in Korea, confirming the high heterogeneity and complexity of FCI-HLN practices. Standardization of FCI-HLN is urgently needed. The findings provide a reference for establishing standard FCI-HLN guidelines.

Venous thromboembolism (VTE), which includes pulmonary embolism and deep vein thrombosis, is a condition characterized by abnormal blood clot formation in the pulmonary arteries and the deep venous vasculature. It is often serious and sometimes even fatal if not promptly and appropriately treated. Moreover, the later consequences of VTE may result in reduced quality of life. The treatment of VTE depends on various factors, including the type, cause, and patient comorbidities. Furthermore, bleeding may occur as a side effect of VTE treatment. Thus, it is necessary to carefully weigh the benefits versus the risks of VTE treatment and to actively monitor patients undergoing treatment. Asian populations are known to have lower VTE incidences than Western populations, but recent studies have shown an increase in the incidence of VTE in Asia. A variety of treatment options are currently available owing to the introduction of direct oral anticoagulants.The current VTE treatment recommendation is based on evidence from previous studies, but it should be applied with careful consideration of the racial, genetic, and social characteristics in the Korean population.