Objective: : Although endovascular treatment for intracranial aneurysms is considered effective and safe, its durability is still debated. Also, few studies have described angiographic follow-up plan after endovascular treatment of intracranial aneurysm, especially in ruptured cases. Hence, we report the long-term results of follow-up angiography protocol. Methods: : Radiological records of 639 cases of coil embolization with ruptured aneurysms from March 2003 to December 2016 were retrospectively reviewed. Patients who received treatment of a saccular aneurysm less than 7 mm resulted with near complete occlusion were included. Two hundred thirty-eight aneuryms which received the follow-up angiography at least once were enrolled. We classified four periods of follow-up as follows : post-treatment 1 year (defined as the first period), from 1 to 2 years (the second period), 2 to 5 years (the third period), and over 5 years (long-term). Results: : We identified 14 cases (6.4%) of recurrence from 218 aneurysms in follow-up angiography in the first period. Among 143 aneurysms in the second period, five cases (3.5%) of recurrence were identified. There were no findings suspicious of recanalization in 97 patients in the third period. Of the total 238 cases, there were 19 recurrences, for a recurrence rate of 8.0%. Six (31.6%) out of 19 recurrences showed a tendency toward repeat recurrences even after additional treatment. Twenty-eight received long-term follow-up over 5 years and there was no recurrence. Conclusion : Most of the recurrence were found during the first and the second year. We suggest that at least one digital subtraction angiography examination may be necessary around post-treatment 2 years, especially in ruptured cases. If the angiographic results are favorable at 2 years post-treatment, long-term result should be favorable.

Objective: : Aneurysm volume quantification (AVQ) using the equation of ellipsoid volume is widely used although it is inaccurate. Furthermore, AVQ with 3-dimensional (3D) rendered data has limitations in general use. A novel universal method for AVQ is introduced for any diagnostic modality and application to any shape of aneurysms. Methods: : Relevant AVQ studies published from January 1997 to June 2019 were identified to determine common methods of AVQ. The basic idea is to eliminate the normal artery volume from 3D model with the aneurysm. After Digital Imaging and Communications in Medicine (DICOM) data is converted and exported to stereolithography (STL) file format, the 3D STL model is modified to remove the aneurysm and the volume difference between the 3D model with/without the aneurysm is defined as the aneurysm volume. Fifty randomly selected aneurysms from DICOM database were used to validate the different AVQ methods. Results: : We reviewed and categorized AVQ methods in 121 studies. Approximately 60% used the ellipsoid method, while 24% used the 3D model. For 50 randomly selected aneurysms, volumes were measured using 3D Slicer, RadiAnt, and ellipsoid method. Using 3D Slicer as the reference, the ratios of mean difference to mean volume obtained by RadiAnt and ellipsoid method were -1.21±7.46% and 4.04±30.54%, respectively. The deviations between RadiAnt and 3D Slicer were small despite of aneurysm shapes, but those of ellipsoid method and 3D Slicer were large. Conclusion : In spite of inaccuracy, ellipsoid method is still mostly used. We propose a novel universal method for AVQ that is valid, low cost, and easy to use.

Objective: : Aneurysm volume quantification (AVQ) using the equation of ellipsoid volume is widely used although it is inaccurate. Furthermore, AVQ with 3-dimensional (3D) rendered data has limitations in general use. A novel universal method for AVQ is introduced for any diagnostic modality and application to any shape of aneurysms. Methods: : Relevant AVQ studies published from January 1997 to June 2019 were identified to determine common methods of AVQ. The basic idea is to eliminate the normal artery volume from 3D model with the aneurysm. After Digital Imaging and Communications in Medicine (DICOM) data is converted and exported to stereolithography (STL) file format, the 3D STL model is modified to remove the aneurysm and the volume difference between the 3D model with/without the aneurysm is defined as the aneurysm volume. Fifty randomly selected aneurysms from DICOM database were used to validate the different AVQ methods. Results: : We reviewed and categorized AVQ methods in 121 studies. Approximately 60% used the ellipsoid method, while 24% used the 3D model. For 50 randomly selected aneurysms, volumes were measured using 3D Slicer, RadiAnt, and ellipsoid method. Using 3D Slicer as the reference, the ratios of mean difference to mean volume obtained by RadiAnt and ellipsoid method were -1.21±7.46% and 4.04±30.54%, respectively. The deviations between RadiAnt and 3D Slicer were small despite of aneurysm shapes, but those of ellipsoid method and 3D Slicer were large. Conclusion : In spite of inaccuracy, ellipsoid method is still mostly used. We propose a novel universal method for AVQ that is valid, low cost, and easy to use.

Reperfusion injury of the spinal cord has been scarcely reported. Herein, we present a case of white cord syndrome after spinal decompression. A 61-year-old male, who initially had ossification of the posterior longitudinal ligament at C3-6 level, was admitted to our hospital with a ruptured disc at the C6-7 level. The patient experienced radiating pain in both upper extremities. Anterior cervical discectomy and fusion was performed. However, the patient developed quadriplegia. Emergency magnetic resonance imaging revealed a new and enlarged signal change in the spinal cord at the C4-7 level. Additional posterior decompression surgery was performed. After intense rehabilitation, the patient’s motor function improved to grade 4. White cord syndrome is likely due to reperfusion injury following operative decompression of a compressed spinal cord segment. Although rare, spine surgeons should be aware of this complication and warn patients preoperatively.

Objective: : Decompressive craniectomy (DC) with duroplasty is one of the common surgical treatments for life-threatening increased intracranial pressure (ICP). Once ICP is controlled, cranioplasty (CP) with reinsertion of the cryopreserved autologous bone flap or a synthetic implant is considered for protection and esthetics. Although with the risk of autologous bone flap resorption (BFR), cryopreserved autologous bone flap for CP is one of the important material due to its cost effectiveness. In this article, we performed conventional statistical analysis and the machine learning technique understand the risk factors for BFR. Methods: : Patients aged >18 years who underwent autologous bone CP between January 2015 and December 2021 were reviewed. Demographic data, medical records, and volumetric measurements of the autologous bone flap volume from 94 patients were collected. BFR was defined with absolute quantitative method (BFR-A) and relative quantitative method (BFR%). Conventional statistical analysis and random forest with hyper-ensemble approach (RF with HEA) was performed. And overlapped partial dependence plots (PDP) were generated. Results: : Conventional statistical analysis showed that only the initial autologous bone flap volume was statistically significant on BFR-A. RF with HEA showed that the initial autologous bone flap volume, interval between DC and CP, and bone quality were the factors with most contribution to BFR-A, while, trauma, bone quality, and initial autologous bone flap volume were the factors with most contribution to BFR%. Overlapped PDPs of the initial autologous bone flap volume on the BRF-A crossed at approximately 60 mL, and a relatively clear separation was found between the non-BFR and BFR groups. Therefore, the initial autologous bone flap of over 60 mL could be a possible risk factor for BFR. Conclusion : From the present study, BFR in patients who underwent CP with autologous bone flap might be inevitable. However, the degree of BFR may differ from one to another. Therefore, considering artificial bone flaps as implants for patients with large DC could be reasonable. Still, the risk factors for BFR are not clearly understood. Therefore, chronological analysis and pathophysiologic studies are needed.

Penetrating brain injury (PBI) is a rare type of traumatic brain injury, which accounts for 0.4% of all head trauma cases. In this study, we describe a 14-year-old male adolescent who sustained a transorbital penetrating injury caused by a fencing knife. Although the patient visited the hospital after the foreign body had been removed, we diagnosed a PBI based on identification of a linear injury trajectory extending from an orbital roof fracture to the contralateral parietal lobe, using three-dimensional reconstruction of the hemorrhage. The patient fully recovered after conservative treatment. We hope that sharing our experience will serve as a guideline for the clinical management of PBI.

PURPOSE: Radical cystectomy has been the most widely used method in the treatment of bladder cancer, but it is limited by major problems. Therefore, we investigated the results of bladder-preserving treatment in patients with T3b, T4a, and T4b transitional carcinoma of the bladder who underwent transurethral resection of bladder cancer and subsequent administration of chemotherapy. MATERIALS AND METHODS: Of all patients who were diagnosed with bladder cancer and underwent bladder-preserving treatment between January 2001 and August 2008, 78 patients with at least 12 months of follow-up data were enrolled in this study. All patients received gemcitabine (1,000 mg/m2) and cisplatin (70 mg/m2) once per month postoperatively for a total of 6 months and completed a follow-up visit every 3 months. The patient survival rate and prognostic factors (age, tumor size, differentiation, number of lesions, stage, and presence of hydronephrosis) were assessed. The Kaplan-Meier method was used to analyze survival rate, and Cox multiple regression analysis was used for prognostic factors. RESULTS: The mean patient age was 68.32+/-8.6 years, the mean duration of follow-up was 54.70+/-32.8 months, and the median duration of follow-up was 49.0 months. The 5-year survival rate was 66.2%. Single lesions were found in 28 cases (35.9%), and multiple lesions were found in 50 cases (64.1%). Stage T3b lesions were identified in 56 cases (71.8%), stage T4a lesions were identified in 16 cases (20.5%), and stage T4b lesions were identified in 6 cases (7.7%). Tumor size was less than 4 cm in 4 cases (59.0%) and greater than 4 cm in 32 (41.0%). Hydronephrosis was present in 21 cases (26.9%). In the 5-year survival analysis, prognostic factors significantly influencing survival rate were T-stage of the tumor and absence of hydronephrosis and complete regression after treatment (p<0.05). Multivariate analysis revealed that tumor stage and the absence of hydronephrosis were statistically significant prognostic indicators. CONCLUSIONS: In patients with T3b, T4a, and T4b transitional carcinoma of the bladder, bladder preservation may prevent a decrease in quality of life. Also, our findings suggest that this approach could be considered a primary treatment option for patients with T3b stage tumors without evidence of hydronephrosis.
Carcinoma, Transitional Cell ; Cisplatin ; Cystectomy ; Deoxycytidine ; Follow-Up Studies ; Humans ; Hydronephrosis ; Multivariate Analysis ; Quality of Life ; Survival Rate ; Urinary Bladder ; Urinary Bladder Neoplasms

BACKGROUND: Exon deletions of Duchenne muscular dystrophy (DMD) gene account for most of the alterations found in DMD and Becker muscular dystrophy (BMD). This study was to evaluate the usefulness of dual priming oligonucleotide multiplex PCR (DPO PCR) in detection of exon deletions of DMD gene. METHODS: Thirty-seven DMD or BMD patients who had known exon deletions detected by conventional multiplex PCR (conventional PCR) and nine control subjects were enrolled in this study. When a discrepancy was shown between the results of conventional PCR and DPO PCR, the multiplex ligation-dependent probe amplification (MLPA) technique was performed as a confirmation test. RESULTS: The same deletions previously identified by conventional PCR in 32 out of 37 subjects were also detected by DPO PCR. For the five subjects (13.5%) showing discrepant results between the conventional PCR and DPO PCR, MLPA was performed and its results were found to correlate better with those of DPO PCR. The discrepancies were due to false positive or false negative results of the conventional PCR. CONCLUSIONS: DPO PCR shows a high agreement of results with the conventional PCR and is considered an adequate method to be used as a primary genetic test for the diagnosis of DMD. Because of an improved accuracy, especially for determining the boundaries of DMD gene deletions, DPO PCR can be very useful as a supplement to the conventional PCR.
*DNA Mutational Analysis ; DNA Primers ; Dystrophin/*genetics ; Female ; Gene Deletion ; Genetic Screening ; Humans ; Male ; Muscular Dystrophy, Duchenne/*diagnosis/genetics ; Nucleic Acid Amplification Techniques ; Oligonucleotide Probes ; Polymerase Chain Reaction/*methods ; Reagent Kits, Diagnostic ; Reproducibility of Results

BACKGROUND: We evaluated multiplex PCR for species identification and toxin typing to improve the sensitivity and turnaround time of toxigenic Clostridium difficile culture (TCDC). METHODS: We performed multiplex PCR using primers targeting the species-specific gene, tpi, and the toxin genes, tcdA and tcdB. From January to March 2008, 528 stool specimens were tested with direct toxin assay (DT) using C. difficile Tox A/B II (Techlab, Blacksburg, USA) and TCDC. For 288 specimens from early study period, toxin production by C. difficile isolates of TCDC was measured by enzyme immunoassay with culture supernatants using VIDAS C. difficile Toxin A&B (CDAB;bioMerieux, Marcy-l'Etoile, France) and multiplex PCR with isolated colonies. For 240 specimens from late period, only multiplex PCR was used to test toxin production by the isolates. RESULTS: During the early period, 29 C. difficile were isolated and their toxin-positive rates were 65.5% by PCR and 44.8% by CDAB (P<0.05). Among 528 stool specimens, the results of DT+/TCDC+, DT+/ TCDC-, and DT-/TCDC+ were 32 (6.1%), 33 (6.3%), and 10 (1.9%), respectively, when tested with PCR. 13.3% of total 75 positive specimens was detected only by TCDC. Of the 42 toxigenic C. difficile isolates, all were positive for tpi, 30 (71.4%) were tcdA+/tcdB+, and 12 (28.6%) were tcdA-/tcdB+. CONCLUSION: TCDC using multiplex PCR for species identification and toxin typing is sensitive and rapid to be used as a routine diagnostic test.
Boron Compounds ; Clostridium ; Clostridium difficile ; Diagnostic Tests, Routine ; Immunoenzyme Techniques ; Multiplex Polymerase Chain Reaction ; Polymerase Chain Reaction