Extracorporeal membrane oxygenation (ECMO) has been used successfully in critically ill patients with traumatic lung injury and offers an additional treatment modality. ECMO is mainly used as a bridge treatment to delayed surgical management; however, only a few case reports have presented the successful application of ECMO as intraoperative support during the surgical repair of traumatic bronchial injury. A 38-year-old man visited our hospital after a blunt chest trauma. His chest imaging showed hemopneumothorax in the left hemithorax and a finding suspicious for left main bronchus rupture. Bronchoscopy was performed and confirmed a tear in the left main bronchus and a congenital tracheal bronchus. We decided to provide venovenous ECMO support during surgery for bronchial repair. We successfully performed main bronchial repair in this traumatic patient with a congenital tracheal bronchus. We suggest that venovenous ECMO offers a good option for the treatment of bronchial rupture when adequate ventilation is not possible.
Adult ; Bronchi ; Bronchoscopy ; Critical Illness ; Extracorporeal Membrane Oxygenation* ; Hemopneumothorax ; Humans ; Lung Injury ; Rupture* ; Tears ; Thorax ; Ventilation ; Wounds, Nonpenetrating

PURPOSE: We conducted objective structured clinical examinations (OSCEs) in medical students both before entering clinical clerkship and after finishing clinical clerkship for the purpose of evaluating the usefulness of OSCEs before clinical clerkship. METHODS: The subjects of the study comprised 77 3rd-year medical students who participated in a 2-week course of physical diagnosis before clinical clerkship, and 98 4th-year medical students who had completed their clinical clerkship. The OSCE consisted of 17 cases and 17 stations for the 3rd-year medical students, and 20 cases and 28 stations for the 4th-year students. We assigned 4 minutes and 30 seconds to each station. OSCE stations were duplicated at two sites and were performed twice. After the OSCE, we used structured questionnaires to survey the subjects for their opinions of the current process and the need for an OSCE. RESULTS: At the psychiatric station, which applied an identical scenario and checklists to both the 3rd- and 4th-year medical students, the mean score of the 3rd-year medical students was significantly lower than that of the 4th-year students. The correlation coefficient between OSCE score and cumulative performance grade of 3rd-year medical students (r=0.29) also was lower than that of 4th-year medical students (r=0.53). Over 80% of the 3rd-year medical students and over 90% of the 4th-year responded that an OSCE is necessary. However, around 70% of students preferred an OSCE for each clinical class during clinical clerkship, and only 33~38% of students preferred an OSCE as a final examination. Almost all students wanted to receive feedback after an OSCE. CONCLUSIONS: Performing an OSCE on 3rd-year medical students before they enter clinical clerkship provides better preparation for the clinical clerkship than an evaluation alone. We suggest that an OSCE should be used as a formative assessment in addition to a summative evaluation such as a final examination.
Checklist ; Clinical Clerkship* ; Diagnosis ; Humans ; Students, Medical* ; Surveys and Questionnaires

PURPOSE: This study evaluated the usefulness of ultrasonography for a diagnosis of acetabular labral tear in femoroacetabular impingement (FAI). MATERIALS AND METHODS: From March 2010 to October 2011, an ultrasonographic examination was performed in 58 patients(58 hips: 26 men and 32 women) with acetabular labral tear. The sensitivity and positive predictive value of ultrasonography were evaluated for 58 cases with acetabular labral tear confirmed by hip arthroscopy. RESULTS: The sensitivity and positive predictive value for an acetabular labral tear using ultrasonography was 89.6% and 100%, respectively. The concordance rate of an acetabular labral tear between arthroscopy and ultrasonography was 84.6%. CONCLUSION: Hip ultrasonography can make a significant contribution to a pathologic diagnosis and isa useful diagnostic tool for acetabular labral tears.
Arthroscopy ; Femoracetabular Impingement ; Hip ; Humans ; Male

Extracorporeal membrane oxygenation (ECMO) has been used successfully in critically ill patients with traumatic lung injury and offers an additional treatment modality. ECMO is mainly used as a bridge treatment to delayed surgical management; however, only a few case reports have presented the successful application of ECMO as intraoperative support during the surgical repair of traumatic bronchial injury. A 38-year-old man visited our hospital after a blunt chest trauma. His chest imaging showed hemopneumothorax in the left hemithorax and a finding suspicious for left main bronchus rupture. Bronchoscopy was performed and confirmed a tear in the left main bronchus and a congenital tracheal bronchus. We decided to provide venovenous ECMO support during surgery for bronchial repair. We successfully performed main bronchial repair in this traumatic patient with a congenital tracheal bronchus. We suggest that venovenous ECMO offers a good option for the treatment of bronchial rupture when adequate ventilation is not possible.
Adult ; Bronchi ; Bronchoscopy ; Critical Illness ; Extracorporeal Membrane Oxygenation ; Hemopneumothorax ; Humans ; Lung Injury ; Rupture ; Tears ; Thorax ; Ventilation ; Wounds, Nonpenetrating

Objective: The study aimed to investigate whether mindfulness could mitigate the impact of job and interpersonal demands arising from stressful organizational cultures in predicting depression during the COVID-19 pandemic. Methods: A total of 280 Korean physical therapists participated in this study. To verify the mediated moderation model, this study implemented an SPSS 26.0 PROCESS Macro (v.3.5) that was based on the verification of Hayes' conditional indirect effect. Results: The study confirmed the moderated mediation effect of mindfulness on the mediating relationship between stressful organizational culture, job demands/interpersonal demands, and depression. Moreover, the conditional indirect effect of mindfulness was found to be statistically significant. However, the impact on interpersonal stress differed from anticipated outcomes. Conclusions Mindfulness, applicable within the framework of the Job Demands-Resources model theory, served as a resource variable and moderated the impact of organizational culture on members' depression. Amidst ongoing debates on mindfulness effectiveness, this study partially confirmed its potential within the Job Demands-Resources model, suggesting a role in mitigating the influence of organizational culture on members' depression as a resource variable.

Purpose: . The purpose of this study is to analyze the biomechanical differences in rotation angle-torque according to the type of implant and to compare the effects of contamination and sandblasting on the removal torque value (RTV) of abutment screws. Materials and methods: . For this study, an automated device for tightening and loosening implant screws was developed, and each 15 implant-abutment complexes of external and internal connection type were prepared, divided into three groups according to the surface treatment of the screw:control group (no treatment), experimental group-1 (artificial saliva contamination and chlorhexidine (CHX) rinsing), and experimental group-2 (artificial saliva contamination, CHX rinsing, and subsequent 50 µm Al 2 O 3 sandblasting). FirstRTV was measured for each group, followed by different post-treatment procedures for the screws, and then Second-RTV was measured. During the procedure, the removal torque value and rotation angle vs. time were recorded at a 20 data/s.A standardized protocol was followed for all the tightening and loosening procedures: screw was tightened with 30 Ncm torque and maintained for 5 s, and then rotated in the reverse direction until the torque value reached 0 Ncm. After 10min of rest period, the screws were loosened to initial point. Results: . Statistical analysis of measured data revealed that the internal connection type showed significantly higher First-RTV compared to the external connection type, however, no significant differences in Second-RTV were found. Both experimental groups 1and 2 showed a decrease in RTVs for both implant types, while the control group showed a decrease in RTV only for the internal type. The internal connection type required a significantly larger rotation angle during the tightening and loosening process. Conclusion . Within the limitations of this study, both artificial saliva contamination and CHX cleansing, as well as sandblasting, decreased RTV in both internal and external connection types. Internal connections were more susceptible to the effects of contaminants.

Objective: The study aimed to investigate whether mindfulness could mitigate the impact of job and interpersonal demands arising from stressful organizational cultures in predicting depression during the COVID-19 pandemic. Methods: A total of 280 Korean physical therapists participated in this study. To verify the mediated moderation model, this study implemented an SPSS 26.0 PROCESS Macro (v.3.5) that was based on the verification of Hayes' conditional indirect effect. Results: The study confirmed the moderated mediation effect of mindfulness on the mediating relationship between stressful organizational culture, job demands/interpersonal demands, and depression. Moreover, the conditional indirect effect of mindfulness was found to be statistically significant. However, the impact on interpersonal stress differed from anticipated outcomes. Conclusions Mindfulness, applicable within the framework of the Job Demands-Resources model theory, served as a resource variable and moderated the impact of organizational culture on members' depression. Amidst ongoing debates on mindfulness effectiveness, this study partially confirmed its potential within the Job Demands-Resources model, suggesting a role in mitigating the influence of organizational culture on members' depression as a resource variable.

Purpose: . The purpose of this study is to analyze the biomechanical differences in rotation angle-torque according to the type of implant and to compare the effects of contamination and sandblasting on the removal torque value (RTV) of abutment screws. Materials and methods: . For this study, an automated device for tightening and loosening implant screws was developed, and each 15 implant-abutment complexes of external and internal connection type were prepared, divided into three groups according to the surface treatment of the screw:control group (no treatment), experimental group-1 (artificial saliva contamination and chlorhexidine (CHX) rinsing), and experimental group-2 (artificial saliva contamination, CHX rinsing, and subsequent 50 µm Al 2 O 3 sandblasting). FirstRTV was measured for each group, followed by different post-treatment procedures for the screws, and then Second-RTV was measured. During the procedure, the removal torque value and rotation angle vs. time were recorded at a 20 data/s.A standardized protocol was followed for all the tightening and loosening procedures: screw was tightened with 30 Ncm torque and maintained for 5 s, and then rotated in the reverse direction until the torque value reached 0 Ncm. After 10min of rest period, the screws were loosened to initial point. Results: . Statistical analysis of measured data revealed that the internal connection type showed significantly higher First-RTV compared to the external connection type, however, no significant differences in Second-RTV were found. Both experimental groups 1and 2 showed a decrease in RTVs for both implant types, while the control group showed a decrease in RTV only for the internal type. The internal connection type required a significantly larger rotation angle during the tightening and loosening process. Conclusion . Within the limitations of this study, both artificial saliva contamination and CHX cleansing, as well as sandblasting, decreased RTV in both internal and external connection types. Internal connections were more susceptible to the effects of contaminants.

Objective: The study aimed to investigate whether mindfulness could mitigate the impact of job and interpersonal demands arising from stressful organizational cultures in predicting depression during the COVID-19 pandemic. Methods: A total of 280 Korean physical therapists participated in this study. To verify the mediated moderation model, this study implemented an SPSS 26.0 PROCESS Macro (v.3.5) that was based on the verification of Hayes' conditional indirect effect. Results: The study confirmed the moderated mediation effect of mindfulness on the mediating relationship between stressful organizational culture, job demands/interpersonal demands, and depression. Moreover, the conditional indirect effect of mindfulness was found to be statistically significant. However, the impact on interpersonal stress differed from anticipated outcomes. Conclusions Mindfulness, applicable within the framework of the Job Demands-Resources model theory, served as a resource variable and moderated the impact of organizational culture on members' depression. Amidst ongoing debates on mindfulness effectiveness, this study partially confirmed its potential within the Job Demands-Resources model, suggesting a role in mitigating the influence of organizational culture on members' depression as a resource variable.

Purpose: . The purpose of this study is to analyze the biomechanical differences in rotation angle-torque according to the type of implant and to compare the effects of contamination and sandblasting on the removal torque value (RTV) of abutment screws. Materials and methods: . For this study, an automated device for tightening and loosening implant screws was developed, and each 15 implant-abutment complexes of external and internal connection type were prepared, divided into three groups according to the surface treatment of the screw:control group (no treatment), experimental group-1 (artificial saliva contamination and chlorhexidine (CHX) rinsing), and experimental group-2 (artificial saliva contamination, CHX rinsing, and subsequent 50 µm Al 2 O 3 sandblasting). FirstRTV was measured for each group, followed by different post-treatment procedures for the screws, and then Second-RTV was measured. During the procedure, the removal torque value and rotation angle vs. time were recorded at a 20 data/s.A standardized protocol was followed for all the tightening and loosening procedures: screw was tightened with 30 Ncm torque and maintained for 5 s, and then rotated in the reverse direction until the torque value reached 0 Ncm. After 10min of rest period, the screws were loosened to initial point. Results: . Statistical analysis of measured data revealed that the internal connection type showed significantly higher First-RTV compared to the external connection type, however, no significant differences in Second-RTV were found. Both experimental groups 1and 2 showed a decrease in RTVs for both implant types, while the control group showed a decrease in RTV only for the internal type. The internal connection type required a significantly larger rotation angle during the tightening and loosening process. Conclusion . Within the limitations of this study, both artificial saliva contamination and CHX cleansing, as well as sandblasting, decreased RTV in both internal and external connection types. Internal connections were more susceptible to the effects of contaminants.