Invasion of enteric bacteria, such as Salmonella and invasive E. coli, into intestinal epithelial cells induces proinflammatory gene responses and finally epithelial cell apoptosis. In this study, we asked whether invasive bacterial infection of human intestinal epithelial cells could upregulate cyclooxygenase-2 (COX-2) gene expression and whether increased COX-2 expression could influence intestinal epithelial cell apoptosis. Expression of COX-2 mRNA and prostaglandin (PG) E production were upregulated in HT-29 colon epithelial cells which were infected with S. dublin or invasive E. coli, as examined by quantitative RT-PCR and radioimmunoassay. Inhibition of COX-2 expression and PGE2 production using NS-398, a specific COX-2 inhibitor, showed a significant increase af epithelial cell apoptosis and caspase-3 activation in HT-29 cells infected with invasive bacteria. However, the addition of valerylsalicylate, a specific COX-1 inhibitor, did not change apoptosis in S. dublin-infected HT-29 cells. These results suggest that upregulated COX-2 expression and PGE2 production in response to invasive bacterial infection could contribute to host defense by inhibiting apoptosis of intestinal epithelial cells.
Apoptosis* ; Bacteria ; Bacterial Infections* ; Caspase 3 ; Colon ; Cyclooxygenase 2 ; Dinoprostone ; Enterobacteriaceae ; Epithelial Cells* ; Gene Expression ; HT29 Cells ; Humans ; Prostaglandin-Endoperoxide Synthases* ; Radioimmunoassay ; RNA, Messenger ; Salmonella

PURPOSE:The purpose of this study was to assess the growth status and to evaluate the factors affecting the development of metabolic syndrome in children born with small for gestational age (SGA) at term gestation. METHODS:We retrospectively reviewed medical records of 73 (36 boys, 37 girls) children born with SGA at term gestation who were visited for short stature and metabolic problems at Seoul National University Children' Hospital between 1994 and 2003. We assessed several clinical parameters as follows:birth weight, height standard deviation score (SDS), weight SDS, weight for height, bone age (BA), chronologic age (CA), predicted adult height (PAH) and midparental height (MPH). We evaluated the factors affecting height SDS according to pubertal status. We also evaluated the factors affecting development of type 2 diabetes mellitus, dyslipidemia or obesity. RESULTS:Pubertal children had greater height SDS, weight SDS and difference between BA and CA than prepubertal children, respectively (P<0.05). Height SDS positively correlated with difference between BA and CA (r=0.43, P<0.01), but BA advancement (BA>CA) was not observed in prepubertal children. BA advancement was observed in all pubertal children except one. The children who had greater weight SDS than height SDS had significantly lower height SDS and delayed BA, respectively (P<0.05). The children who had metabolic problems had higher weight SDS (P<0.05). CONCLUSION: This study suggests that rapid skeletal maturation may develope during transition from prepuberty to puberty and catch-up growth may contribute to the development of metabolic syndrome in children born with SGA, but further study will be required.
Adolescent ; Adult ; Child* ; Diabetes Mellitus, Type 2 ; Dyslipidemias ; Gestational Age* ; Humans ; Medical Records ; Obesity ; Pregnancy* ; Puberty ; Retrospective Studies ; Seoul

Thromboembolism, as a potentially lethal complication especially occured in pulmonary arteries, is uncommon in patients undergone arthroscopy. We describe a case of pulmonary thromboembolism that accurred after a diagnostic knee arthroscopy under spinal anesthesia with the isobaric tetracaine. Cardiopulmonary collapse occurred suddenly on the postoperative 2nd day and resuscitation was unsuccessful. Definitive diagnosis was made at autopsy. On the review of literatures, two cases of thromboembolism following arthroscopy under spinal anesthesia have been previously reported, but fatal case has not.
Anesthesia, Spinal* ; Arthroscopy* ; Autopsy ; Diagnosis ; Humans ; Knee* ; Pulmonary Artery* ; Pulmonary Embolism ; Resuscitation ; Tetracaine ; Thromboembolism*

No abstract available.
Miller Fisher Syndrome

Adenoid cystic carcinoma is a rare disease of which incidence is 10-15 % of bartholins gland carcinoma. The clinical presentation is characterized by a vulval mass that existed for a prolonged period to the onset of symptoms, usually infection, pain, and burningsensation Histologically, this tumor is characterized by cribriform pattern cell growing and perineural invasion. The obtaining of clear surgical margins is the most important aspect of treatment. Here we report a case of adenoid cystic carcinoma of the Bartholins gland with a brief review of literature.
Adenoids* ; Carcinoma, Adenoid Cystic* ; Incidence ; Rare Diseases

PURPOSE: This study was to determine the effects of foot reflexomassage on constipated college women for the treatment of constipation. METHOD: The researcher sampled nursing students attending a college of nursing science in Gyeonggi-Do, and checked if they were affected by constipation in reference to the Rome II criteria & CAS. They were randomly divided into an experimental group(15 subjects) and a control group(15 subjects). Foot reflexomassage was applied to the experimental group 10 times in 2 weeks : each time lasted 40 minutes. The frequency of defecation and severity of constipation by CAS were measured. The collected data was analyzed using the SPSS 11.5 program. RESULT: The CAS score of the experimental group was significantly lower after foot reflexomassage than those of the control group (p=.000). CONCLUSION: Foot reflexomassage can be considered an effective alternative treatment for constipated young women.
Complementary Therapies ; Constipation ; Defecation ; Female ; Foot* ; Gyeonggi-do ; Humans ; Nursing ; Students, Nursing

The major influencing factors on the strength of all-ceramic crowns are types of dental ceramics, fabrication techniques, methods of abutment preparation and cementation modes of all ceramic restorations. Zine phosphate cement and glass-ionomer cement were used as an early luting media for all-ceramic crowns. Recently many studies have reported that resin cements have more advantages in increasing the fracture strength of restorations comparing with zincphosphate cement and glass-ionomer cement. The purpose of this study is to investigate the effect of etching, silane treatment, sandblasting and dentin bonding agents on fracture strengths of dental ceramics. 40 flat dentin specimens and 40 ceramic discs of 1.5mm thickness and 8mm diameter were fabricated, and divided into 4 groups according to surface treatments. Surface treatments before cementation were as follows. Group I : (ceramic) : HF etching - silane treatment - application of bonding resin (dentin) : application of dentin bonding agent Group II : (ceramic) : sandblasting - application of bonding resin (dentin) : application of dentin bonding agent Group III : (ceramic) : application of bonding resin (dentin) : application of dentin bonding agent Group IV : (ceramic) : HF etching - silane treatment - application of bonding resin (dentin) : no dentin bonding procedure Dentin specimens and ceramic discs were cemented with dual cure resin cement, and went through thermocycling. Compressive stress es were loaded on the centers of ceramic discs with Instron testing machine, and fracture strengths resista' nce for catastrophic fracture were measured The results were as follows. 1. The group I showed the highest fracture resistance. The next was group II. And group III, IV followed. 2. There was a significant difference in the mean value of fracture strengths between group I and group III (p<0.05), but no significant differences between group I and group II, and group II and group III (p>0.05). 3. There was a significant difference in the mean value of fracture strengths between group I and group IV (p<0.05).
Cementation ; Ceramics* ; Crowns ; Dentin ; Dentin-Bonding Agents ; Glass Ionomer Cements ; Resin Cements

This investigation evaluated the fracture toughness (KIC) of eight currently available core materials, and relate the fracture toughness value to fractography analysis and surface characteristics using a atomic force microscope (AFM). Single-edge notched (SEN) test specimens (n=10) and compact tension (CT) test specimens (n=10) were prepared conforming to the ASTM Standard E-399 for a high copper amalgam, three composite core materials (Core-Max II, Core Paste, Bisfil Core), two reinforced composite core materials (Ti-Core, Ti-Core Natural), a resin-modified glass ionomer core material (Vitremer), and a conventional glass ionomer core material (Ketac-Molar). The specimens were tested with an Instron Universal Testing Machine. The maximum loads were measured to calculate the fracture toughness (KIC). Thereafter, fracture surfaces of SEN specimens of each material were investigated for fractography analysis using scanning electron microscope. And, disc-shaped specimens with 1mm thickness were fabricated for each material and were investigated under AFM for surface morphology analysis. The results were as follows : 1. Bisfil Core showed the highest mean fracture toughness regardless of test methods. 2. For the tooth-colored materials, Ti-Core Natural exhibited the highest fracture toughness. 3. Ketac Molar showed a significantly low fracture toughness when compared with the amalgam and the composite resin core materials (p<0.05). 4. The fracture toughness values obtained with the single-edge notched test, except Ketac Molar, were higher than those obtained in the compact tension test. 5. SEM revealed that the fracture surface of high fracture toughness material was rougher than that of low fracture toughness material. 6. AFM revealed that the surface particles of the composite resins were smaller in size, with a lower surface roughness than the glass ionomer core materials.
Composite Resins ; Copper ; Glass ; Molar

No abstract available.
DNA* ; Lung Neoplasms* ; Lung* ; Ploidies*

No abstract available.
Urinary Tract Infections* ; Urinary Tract*