No abstract available.
Dapsone* ; Herpesvirus 4, Human* ; Hypersensitivity*

Author list should be corrected.

No abstract available.
Hemangioma* ; Injections, Intralesional* ; Propranolol ; Triamcinolone*

Recently, tuberculosis of bone and joint is decreased with good nutrition and environment, development of preventive medicine and improvement of treatment regimen. But it is still one of the common inflammatory diseases in Korea, and must be considered in the differential diagnosis of common orthopedic complaints. There are few reports on extraspinal tuberculosis of bone and joint. Forty one cases of extraspinal tuberculosis of bone and joint were studied in our department from January 1988 to August 1993. The results were as follows; l. Extraspinal tuberculosis of bone and joint were 41 cases (39 patients, 27.8% of 147 tuberculosis of bone and joint including spine). 2. The proportion of children and young adults was 56%, hips were involved in 11 cases, knee joints in 8 cases, ankle joints in 6 cases, feet in 6 cases and elbow joints in 5 cases. 3. Coexisting pulmonary tuberculosis was found in 19 patients and active lesion in 15 patients. 4. Confirmative diagnosis could be made by smear and culture of the lesion or pathologic findings or recently available polymerase chain reaction(PCR) method. 5. Various treatment, such as antituberculous medication, external immobilization, synovectomy, curettage and bone graft, arthrodesis, had been carried out. 6. Reactivation of other site was found in 7.3%(3 cases) and resistant tendency was found in 9.7%(4 cases).
Ankle Joint ; Arthrodesis ; Child ; Curettage ; Diagnosis ; Diagnosis, Differential ; Elbow Joint ; Foot ; Hip ; Humans ; Immobilization ; Joints ; Knee Joint ; Korea ; Methods ; Orthopedics ; Preventive Medicine ; Transplants ; Tuberculosis ; Tuberculosis, Pulmonary ; Young Adult

No abstract available.
Colorectal Neoplasms*

Even though some authors have reported on the advantages of early total correction of complex heart disease, for low birth weight premature neonates, most surgeons prefer a multi-step approach to early total correction due to the many problems, such as the technical problems, the cardiopulmonary bypass management and etc. We report here on a successful case of early one-stage total repair of coarctation of the aorta and a ventricular septal defect in a 1,250 gram premature neonate.
Aortic Coarctation ; Cardiopulmonary Bypass ; Heart Diseases ; Heart Septal Defects, Ventricular ; Humans ; Infant, Low Birth Weight ; Infant, Newborn ; Infant, Premature ; Thoracic Surgery

High tibial osteotomy is a useful procedure in the treatment of early stage osteoarthritis of the knee which is confined to the medial compartment. But long term follow-up study of high tibial osteotomy has not been provided yet and its prerequisite for a successful result still remains unrevealed. Since the osteoarthritis can progress after the osteotomy, it may result in the loss of correction and recurrence of pain and require conversion to total knee replacement arthroplasty. We studied clinically and radiologically the long term result of high tibial osteotomy in 11 patients(16 knees) who had been treated at the Department of Orthopaedic surgery of Seoul Paik Hospital during the period from January, 1978 to May, 1989, and follow-up for longer than 4 years. Preoperative mean varus angle was 6.4 degrees and immediate postoperative mean valgus angle was 8.6 degrees and final mean valgus angle was 4.7 degrees. The average loss of correction angle was 3.9 degrees. At 2-year follow-up, the results of 16 knees were as follows; excellent in six knees, good in seven knees. The final results at average 7.2-year follow-up were excellent in four knees, good in six knees and one knee was converted to total knee replacement arthroplasty. The results showed deterioration of clinical results and loss of correction with time after osteotomy. However, in more than half of the cases the results were good or excellent at the final follow-up, We, therefore, conclude that high tibial osteotomy is still a useful procedure in osteoarthritis of the knee if performed with a precise surgical technique and an adequate overcorrection more than 10 degrees.
Arthroplasty ; Arthroplasty, Replacement, Knee ; Follow-Up Studies ; Knee ; Osteoarthritis ; Osteotomy ; Recurrence ; Seoul

The mortality and morbidity of peritrochanteric fractures in the elderly are great due to preexisting diseases, the osteoporosis, and poor general conditions. Since the complications sometimes lead to death, it is utmost important to reduce the complications and to prevent them. Authors had experienced 42 peritrochanteric fractures over 65 years old from January, 1988 to December, 1992. Age incidence was distributed from 65 to 93 years. The sites of fractures were 17 femoral neck, 24 intertrochanteric, 1 subtrochanteric. The mortality at postoperative 6 months was 10.2%. The postoperative complications were 6 cardiovascular diseases, 3 pneunonia, 3 pressure sore etc. The results according to interval between injury and operation were not significant, but reducing risk factors following check-up of general conditions was significant. It was necessary in treatment of elderly peritrochanteric fractures to check the general conditions, to reduce risk factors, to choose appropriate method of operation and anesthesia, and to operate as soon as possible by experienced surgeon. Postoperative early ambulation was also significant at good results. The percutaneous pinning under local anesthesia was an recommendable method in patients with severely poor general conditions.
Aged ; Anesthesia ; Anesthesia, Local ; Cardiovascular Diseases ; Early Ambulation ; Femur Neck ; Humans ; Incidence ; Methods ; Mortality ; Osteoporosis ; Postoperative Complications ; Preexisting Condition Coverage ; Pressure Ulcer ; Risk Factors

STATEMENT OF PROBLEM: Zirconia-based restorations have the common technical complication of delamination, or porcelain chipping, from the zirconia core. Thus the shear bond strength between the zirconia core and the veneering porcelain requires investigation in order to facilitate the material's clinical use. PURPOSE: The purpose of this study was to evaluate the bonding strength of the porcelain veneer to the zirconia core and to other various metal alloys (high noble metal alloy and base metal alloy). MATERIAL AND METHODS: 15 rectangular (4x4x9mm) specimens each of zirconia (Cercon), base metal alloy (Tillite), high noble metal alloy (Degudent H) were fabricated for the shear bond strength test. The veneering porcelain recommended by the manufacturer for each type of material was fired to the core in thickness of 3mm. After firing, the specimens were embedded in the PTFE mold, placed on a mounting jig, and subjected to shear force in a universal testing machine. Load was applied at a crosshead speed of 0.5mm/min until fracture. The average shear strength (MPa) was analyzed with the one-way ANOVA and the Tukey's test (alpha= .05). The fractured specimens were examined using SEM and EDX to determine the failure pattern. RESULTS: The mean shear strength (+/- SD) in MPa was 25.43 (+/- 3.12) in the zirconia group, 35.87 (+/- 4.23) in the base metal group, 38.00 (+/- 5.23) in the high noble metal group. The ANOVA showed a significant difference among groups, and the Tukey's test presented a significant difference between the zirconia group and the metal group. Microscopic examination showed that the failure primarily occurred near the interface with the residual veneering porcelain remaining on the core. CONCLUSION: There was a significant difference between the metal ceramic and zirconia ceramic group in shear bond strength. There was no significant difference between the base metal alloy and the high noble metal alloy.
Ceramics ; Collodion ; Dental Porcelain ; Fires ; Fungi ; Polytetrafluoroethylene ; Shear Strength ; Zirconium

PURPOSE: Marginal fit is a very important factor considering the restoration's long-term success. However, adding porcelain to copings can cause distortion and lead to an inadequate fit which exposes more luting material to the oral environment and causes secondary caries. The purpose of this study was to compare the marginal fit of 2 different all-ceramic crown systems before and after porcelain veneering. This study was also intended to verify the marginal fit of crowns originated from green machining of partially sintered blocks of zirconia (Lava CAD/CAM system) and that of crowns obtained through machining of fully sintered blocks of zirconia (Digident CAD/CAM system). MATERIAL AND METHODS: 20 crowns were made per each system and the marginal fit was evaluated through a light microscope with image processing (Accura 2000) at 50 points that were randomly selected. Each crown was measured twice: the first measurement was done after obtaining a 0.5 mm coping and the second measurement was done after porcelain veneering. The means and standard deviations were calculated and statistical inferences among the 2 groups were made using independent t-test and within the same group through paired t-test. RESULTS: The means and standard deviations of the marginal fit were 61.52 +/- 2.88 micrometer for the Digident CAD/CAM zirconia ceramic crowns before porcelain veneering and 83.15 +/- 3.51 micrometer after porcelain veneering. Lava CAD/CAM zirconia ceramic crowns showed means and standard deviations of 62.22 +/- 1.78 micrometer before porcelain veneering and 82.03 +/- 1.85 micrometer after porcelain veneering. Both groups showed significant differences when analyzing the marginal gaps before and after porcelain veneering within each group. However, no significant differences were found when comparing the marginal gaps of each group before porcelain veneering and after porcelain veneering as well. CONCLUSION: The 2 all-ceramic crown systems showed marginal gaps that were within a reported clinically acceptable range of marginal discrepancy.
Ceramics ; Crowns ; Dental Porcelain ; Light ; Zirconium