No abstract available.
Anxiety* ; Depression* ; Humans ; Renal Dialysis*

No abstract available.

The orchid symbiotic fungi were isolated from the roots of Korean native orchid (Cymbidium goeringii) collected and Chinese orchid (C. sinense) obtained from greenhouses. They were identified as a species of Rhizoctonia, based on the sequences of 18r rDNA, the microscopic observations of mycelia, and the symbiotic relationships with commercial orchids. The isolate collected from Chinese orchids was revealed to be a species of Ceratobasidium endophytica, and to be different from the other isolates at the thickness of the mycelia stained in the root cells of Korean native orchids. The other isolates collected from the Korean native orchids were considered to be a species of Tulsanella repens (anamorphic: Epulorhiza repens) or its related one. The physiologic or microscopic variations were oftenly observed among them, but the tendency of grouping these in the 18s rDNA sequences were observed to be consistent with those of the localities collected. The further taxonomical segregating for Korean symbiotic fungi was not made because the information concerned were limited in this moment, but was recognized as based on the sequences of 18s DNA.
Asian Continental Ancestry Group ; DNA ; DNA, Ribosomal ; Fungi* ; Humans ; Mycorrhizae ; Rhizoctonia ; Symbiosis

No abstract available.
Dental Implantation* ; Dental Implants* ; Osseointegration*

Holoprosencephaly is a rare and complex malformation affecting the cleavage of the developing forebrain and is usually associated with defects of the mid Face. We have experienced a case of holoprosencephaly, diagnosed prenatally by ultrasound examination at 31 weeks of pregnancy in a 31-year-old primigravida woman. This case is characterized by holoprosencephaly, cleft palate, cleft lip, left renal aplasia and right renal hypertrophy. The chromosomal study showed a deletion of the long arm of chromosome 7, 46, XX, del(7)(q32), We report with a terminal deletion of chromosome 7q associated with atypical clinical picture and holoprosencephaly.
Adult ; Arm ; Chromosome Aberrations* ; Chromosomes, Human, Pair 7 ; Cleft Lip ; Cleft Palate ; Female ; Holoprosencephaly ; Humans ; Hypertrophy ; Multicystic Dysplastic Kidney* ; Pregnancy ; Prosencephalon ; Ultrasonography

STUDY DESIGN: The authors is to report the clinical and radiological results of proximal half corpectomy with one motion segment fusion in Denis type B burst fracture. OBJECTIVES: To evaluate the efficacy of proximal half corpectomy in Denis type B burst fracture of thethoracolumbar and lumbar spine. SUMMARY OF LITERATURE REVIEW: For the operative management of burst fracture, various mothods including posterior ligamentotaxis, posterolateral decompression, anterior decompression or combined were reported. Among the methods, anterior decompression by the corpectomy of fractured vertebral body and fusion with or without instrumentation is the one of the widely accepted method of treatment. However, anterior decompression by excision of whole vertebral body has the disadvantage of high complication rate due to the instability from the large defect and long length of bone graft. Moreover, two motion segments have to be sacrified, which is very important especially in thoracolumbar and lumbar area. Material and METHODS: 43 cases operated from 1989 to 1996 and the minimum follow up period was two years and compared with that of 48 cases who were treated by total corpectomy and two motion segment fashion from 1986 to 1989. RESULTS: Solid bony union was obtained in 43 cases within 6 months and no back pain was complained in 39 cases (93%) at last follow up. There was no significant difference between two groups in correction of anterior vertebral height and kyphotic angle. Length of bone graft was 3.0cm in half corpectomy group and was 6.3cm in total corpectomy group. Hardward breakage or graft collapse was not observed in proximal half corpectomy, while there were 5 cases in total corpectomy. CONCLUSION: Proximal half corpectomy and fusion of one motion segment in Denis type B burst fracture is believed to be a successful method which can minimize the fused level, increase the stability, preserve motion segment and reduce the complication.
Back Pain ; Decompression ; Follow-Up Studies ; Spine* ; Transplants

All ceramic restorations have had a more limited life expectancy than metal ceramic crowns because of their lower strength. The relatively lower strength has limited the use of all-ceramic crowns to the areas where occlusal loads are lower. Therefore many researches have been done to increase the strength of all-ceramic crowns. IPS Empress 2 is a new type of lithium disilicate glass-ceramic with enhanced physical characteristics which has been in use clinically since 1998. Previous researches reported that the flexural strength of all-ceramic material was greater than 300MPa, and all-ceramic crowns can be used in staining or layering technique. The objective of this study was to investigate the influence of the thickness of IPS Empress 2 ceramic on fracture strength. Both staining technique and layering technique was investigated. Vita VMK was used as control. For all three groups, five specimens each of 0.8mm, 1.0mm, 1.4mm, 1.8mm, and 2.2mm thickness (a total of 75 specimens) were prepared. Control group: Vita VMK Porcelain specimens were prepared with dentine ceramic and liquid glazing was done. Group I: IPS Empress 2 were prepared with staining technique and stained twice and glazed once. Group II : IPS Empress 2 were prepared with layering technique and glazed after wash firing. The thickness and diameter of the specimen were measured and controlled after specimen preparation. Biaxial Flexure Test (ASTM Standard F394-78) was adopted as this test method produces results least affected by the edge condition of the specimens. Fracture strength was measured with Instron Universal Testing Machine. Conclusions are as follow : 1. The fracture strength was increase in order of control group, test group I, test group II. 2. Fracture strength of the group I(Empress 2 Staining) was 65.54 N in 0.8mm, 155.2 N in 1.0mm, 233.5 N in 1.44mm, 434.5 N in 1.8mm, and 600.1 N in 2.2mm. 3. Fracture strength of the group II (Empress 2 Layering) was 190.0 N in 0.8mm, 283.5 N in 1.0mm, 437.2 N in 1.4mm, 732.0 N in 1.8mm, and 1115.0 N in 2.2mm. 4. No statistical difference was found in flexural strengths according to thickness in a specified group(p>0.05).
Ceramics* ; Crowns ; Dental Porcelain ; Dentin ; Fires ; Life Expectancy ; Lithium

The ideal restorative material should mimic the properties of the tissues it replaces. Dental composite resins have been used widely as restorative materials due to its advantages such as excellent esthetics and ease of manipulation. But inadequate wear resistance has been a major factor limiting the use of composite restorative materials. Improved manufacturing techniques have allowed the development of hybrid composites, with a greater percentage volume filler loading, which have improved physical an mechanical properties. However they are lacking the study wear resistance. The purpose of this study was to evaluate the wear of human enamel against ceromer by the use of a pin-on-disk type wear testers. Discs of ceromer(Targis : Ivoclar, Vivadent, Amherst. NY) and discs of type III gold alloy as a control were used for test specimens. Intact cusp of premolar and molar were used for enamel specimens. The wear of enamel was determined by weighing the cusp before and after each test, and the weight converted to volumes by average density of enamel. Surface profilometer was used to quantify wear of the ceromer and gold specimens. Vicker's hardness tester was used to evaluate the surface hardness of test specimens. The SEM was used to evaluate the wear surfaces. The results were as follows; 1. Ceromer produced less enamel wear than gold(p<0.05). 2. The wear volume of ceromer was greater than that of gold(p<0.01). 3. The hardess of ceromer was lower than that of gold, but there was no correlation between the hardness and wear of the ceromer and gold. 4. SEM analysis revealed that there were many voids and microcracks in the wear tract of ceromer. in gold group, many minute V-shaped grooves were examined.
Alloys ; Bicuspid ; Composite Resins ; Dental Enamel* ; Esthetics ; Hardness ; Hardness Tests ; Humans* ; Molar

No abstract available.
Skin, Artificial*

The results of this study which had been investigated for the purpose of analyzing heavy metal concentrations in women's blood and urine, their correlation degree and significance of cadmium as indicator of accumulated heavy metals are as follows. 1) In blood, concentrations of Cd, Pb, Cu and Zn are respectively 0.0110+/-0.14 ug/ml, 0.208+/-138 ug/ml, 0.899+/-0.153 ug/ml and 5.432+/-1.020 ug/ml. 2) In urine, concentrations of Cd, Pb, Cu and Zn are respectively 0.003+/-0.12 ug/ml, 0.025+/-0.18 ug/ml, 0.013+/-0.12 ug/ml and 0.277+/-0.192 ug/ml. 3) Correlation coefficients between blood and urine are only significant in Zn (r=0.363, p<0.01). 4) In blood, correlation coefficients of Cd concentration and Pb, Zn are respectively 0.518 (p<0.01). 5) Correlation coefficients between Cd concentration in blood and Pb, Cu and Zn in urine are respectively r=-0.012, r=0.027, r=0.241 (p<0.05), and only Cd concentration and Zn is significant.
Cadmium ; Metals, Heavy