PURPOSE: Urinary excretion of N acetyl-beta-D glucosaminidase (NAG) and beta2-microglobulin (beta2-M) was increased in the presence of proximal tubular damage. Based on these urinary materials, we investigated the ability of expecting renal function in chronic glomerular diseases. In this study, we evaluated the relationship between glomerular filtration rate (GFR) urinary NAG, and urinary beta2-M. METHODS: We evaluated 52 children with chronic kidney disease at the Chung-Ang University Hospital between January 2003 and August 2009. We investigated the 24-hour urinalysis and hematologic values in all 52 patients. Serum creatinine, creatinine clearance (Ccr), serum cystatin C, urinary beta2-M and urinary NAG were measured. RESULTS: Out of 52 patients, there were 13 children with minimal change in disease, 3 children with focal segmental glomerulosclerosis, 17 children with immunoglobulin A nephropathy, 15 children with Henoch-Schonlein purpua nephritis, 3 children with poststreptococcal glomerulonephritis, and 1 child with thin glomerular basement membrane disease. In these patients, there were significant correlation between the Ccr and urinary NAG (r=-0.817; P<0.01), and between the GFR (as determined by Schwartz method) and urinary NAG (r=-0.821; P<0.01). In addition, there was a significant correlation between the GFR (as determined by Bokencamp method) and urinary NAG (r=-0.858; P<0.01). CONCLUSION: In our study, there was a significant correlation between the GFR and urinary NAG, but there was no correlation between the GFR and urinary beta2-M, suggesting that the GFR can be predicted by urinary NAG in patients with chronic glomerular disease.
Child ; Creatinine ; Cystatin C ; Glomerular Basement Membrane ; Glomerular Filtration Rate ; Glomerulonephritis ; Glomerulonephritis, IGA ; Glomerulosclerosis, Focal Segmental ; Hexosaminidases ; Humans ; Nephritis ; Proteinuria ; Renal Insufficiency, Chronic ; Urinalysis

Hyponatremia which is a very common electrolyte abnormality in hospitalized patients is defined as a plasma sodium concentration less than 135 mEq/L. Hyponatremia is generally caused by intravascular volume depletion, excessive salt loss and hypotonic fluid overload. It also can be caused by intravascular osmotic agent. Although most cases are mild and asymptomatic, acute severe hyponatremia can cause severe neurologic symptoms, such as seizures and coma. We report a rare case of severe hyponatremia induced by radiographic contrast agent.
Coma ; Humans ; Hyponatremia ; Neurologic Manifestations ; Plasma ; Seizures ; Sodium

As dental implant surgery and bone grafts were widely operated in Korean dentist, many bone substitutes are commercially available, currently. For commercially used in Korea, all bone substitutes are firstly evaluated by the Ministry of Health and Welfare (MOHW) for safety and efficacy of the product. After being priced, classified, and registration by the Health Insurance Review and Assessment Service (HIRA), the post-application management is obligatory for the manufacturer (or representative importer) to receive a certificate of Good Manufacturing Practice by Ministry of Food and Drug Safety. Currently, bone substitutes are broadly classified into C group (bone union and fracture fixation), T group (human tissue), L group (general and dental material) and non-insurance material group in MOHW notification No. 2018-248. Among them, bone substitutes classified as dental materials (L7) are divided as xenograft and alloplastic bone graft. The purpose of this paper is to analyze alloplastic bone substitutes of 37 products in MOHW notification No. 2018-248 and to evaluate the reference level based on the ISI Web of Knowledge, PubMed, EMBASE (1980–2019), Cochrane Database, and Google Scholar using the criteria of registered or trademarked product name.
Bone Substitutes ; Dental Implantation ; Dental Implants ; Dental Materials ; Dentists ; Heterografts ; Humans ; Insurance, Health ; Korea ; Patents as Topic ; Transplants

This correction is being published to correct the 4th author's affiliation in the article.

As dental implant surgery and bone grafts were widely operated in Korean dentist, many bone substitutes are commercially available, currently. For commercially used in Korea, all bone substitutes are firstly evaluated by the Ministry of Health and Welfare (MOHW) for safety and efficacy of the product. After being priced, classified, and registration by the Health Insurance Review and Assessment Service (HIRA), the post-application management is obligatory for the manufacturer (or representative importer) to receive a certificate of Good Manufacturing Practice by Ministry of Food and Drug Safety. Currently, bone substitutes are broadly classified into C group (bone union and fracture fixation), T group (human tissue), L group (general and dental material) and non-insurance material group in MOHW notification No. 2018-248. Among them, bone substitutes classified as dental materials (L7) are divided as xenograft and alloplastic bone graft. The purpose of this paper is to analyze alloplastic bone substitutes of 37 products in MOHW notification No. 2018-248 and to evaluate the reference level based on the ISI Web of Knowledge, PubMed, EMBASE (1980–2019), Cochrane Database, and Google Scholar using the criteria of registered or trademarked product name.

This correction is being published to correct the 4th author's affiliation in the article.

To determine chronic alcoholism (or alcohol abuse) in postmortem cases, investigating the evidence in incident (or medical) reports is important, but it may not be certain. The indicator of alcohol abuse over long time periods was analyzed from hair as ethyl glucuronide (EtG). Beta-hydroxybutyrate (BHB) was analyzed from blood as a representative indicator of ketosis. Moreover, the blood was analyzed for ethanol (ethyl alcohol, EtOH) and EtG before death to determine drinking. Case 1 had chronic alcoholism and a history of diabetic disease. EtG concentration was 1,244 pg/mg in hair, and BHB in the blood was 276 mg/L. EtOH was less than 0.010% in the blood, however EtG was 0.38 mg/ L as drinking positive. Case 2 had a habit of drinking well, with EtG in hair of 54 pg/mg, BHB in the blood of 371 mg/L, EtOH of < 0.010%, and EtG of 0.81 mg/L.Although the EtOH was not detected in the blood, it was evaluated that alcohol was consumed before death, due to the EtG detected. In conclusion, forensic information from simultaneous analysis of EtG and BHB in biological samples (hair or blood) could be more cause of death effective assistant in chronic alcoholism (or alcohol abuse).

Background: Distal radius fractures with complete intra-articular involvement and diaphyseal extension pose significant challenges for stable fixation. Treatment options vary, with no single method demonstrating superiority. This study analyzed the outcomes of fixing these type of fractures with volar locking plates, which are widely used worldwide, and the fracture length according to plate type to determine when an extra-long plate should be used. Methods: This retrospective review analyzed 89 consecutive patients surgically treated for Association of Osteosynthesis (AO) classification type C distal radius fractures with diaphyseal extension, excluding open fractures. The plate length was determined to be long enough accordingly to avoid placing screws in the fracture site. Radiographic evaluation and clinical outcomes were analyzed. Results: According to the AO system, C3 type fractures comprised 50%, C1 type 28%, and C2 type 22%. The average distance from the radiocarpal joint to the most proximal fracture line was 41.1 mm, with articular step off and gap of 1.7 mm and 3.7 mm, respectively. Concomitant distal ulna fractures were present in 81%. At final follow-up, the mean radial height was 10.9 mm, radial inclination was 22.8°, volar tilt was 5.7°, and ulnar variance was 0.6 mm. Fracture union occurred on average at 2.6 months. The average Disabilities of the Arm, Shoulder, and Hand score was 12.0 and the average Modified Mayo Wrist Score was 83.6. Regarding the average wrist range of motion, extension was 63.8°, flexion was 53.7°, ulnar deviation was 25.1°, and radial deviation was 16.7°. Complications included delayed wound healing in 3% and delayed union in 1 patient, who eventually achieved union at 10 months after surgery. APTUS Wrist Distal Radius Plates XL 2.5 and 2.4-mm Variable Angle LCP Two-Column Volar Distal Radius Plates showed a statistically significant difference in fracture length, with the former being longer than the latter (62 mm vs. 35 mm, p < 0.001). Conclusions If the fracture length from the articular surface to the diaphysis exceeds 60 mm, we recommend preparing an extralong distal radius plate. Volar plate fixation with appropriate length selection has yielded favorable functional outcomes and few minor complications in distal radius fractures with complete intra-articular involvement and diaphyseal extension.

Background: Distal radius fractures with complete intra-articular involvement and diaphyseal extension pose significant challenges for stable fixation. Treatment options vary, with no single method demonstrating superiority. This study analyzed the outcomes of fixing these type of fractures with volar locking plates, which are widely used worldwide, and the fracture length according to plate type to determine when an extra-long plate should be used. Methods: This retrospective review analyzed 89 consecutive patients surgically treated for Association of Osteosynthesis (AO) classification type C distal radius fractures with diaphyseal extension, excluding open fractures. The plate length was determined to be long enough accordingly to avoid placing screws in the fracture site. Radiographic evaluation and clinical outcomes were analyzed. Results: According to the AO system, C3 type fractures comprised 50%, C1 type 28%, and C2 type 22%. The average distance from the radiocarpal joint to the most proximal fracture line was 41.1 mm, with articular step off and gap of 1.7 mm and 3.7 mm, respectively. Concomitant distal ulna fractures were present in 81%. At final follow-up, the mean radial height was 10.9 mm, radial inclination was 22.8°, volar tilt was 5.7°, and ulnar variance was 0.6 mm. Fracture union occurred on average at 2.6 months. The average Disabilities of the Arm, Shoulder, and Hand score was 12.0 and the average Modified Mayo Wrist Score was 83.6. Regarding the average wrist range of motion, extension was 63.8°, flexion was 53.7°, ulnar deviation was 25.1°, and radial deviation was 16.7°. Complications included delayed wound healing in 3% and delayed union in 1 patient, who eventually achieved union at 10 months after surgery. APTUS Wrist Distal Radius Plates XL 2.5 and 2.4-mm Variable Angle LCP Two-Column Volar Distal Radius Plates showed a statistically significant difference in fracture length, with the former being longer than the latter (62 mm vs. 35 mm, p < 0.001). Conclusions If the fracture length from the articular surface to the diaphysis exceeds 60 mm, we recommend preparing an extralong distal radius plate. Volar plate fixation with appropriate length selection has yielded favorable functional outcomes and few minor complications in distal radius fractures with complete intra-articular involvement and diaphyseal extension.

Background: Distal radius fractures with complete intra-articular involvement and diaphyseal extension pose significant challenges for stable fixation. Treatment options vary, with no single method demonstrating superiority. This study analyzed the outcomes of fixing these type of fractures with volar locking plates, which are widely used worldwide, and the fracture length according to plate type to determine when an extra-long plate should be used. Methods: This retrospective review analyzed 89 consecutive patients surgically treated for Association of Osteosynthesis (AO) classification type C distal radius fractures with diaphyseal extension, excluding open fractures. The plate length was determined to be long enough accordingly to avoid placing screws in the fracture site. Radiographic evaluation and clinical outcomes were analyzed. Results: According to the AO system, C3 type fractures comprised 50%, C1 type 28%, and C2 type 22%. The average distance from the radiocarpal joint to the most proximal fracture line was 41.1 mm, with articular step off and gap of 1.7 mm and 3.7 mm, respectively. Concomitant distal ulna fractures were present in 81%. At final follow-up, the mean radial height was 10.9 mm, radial inclination was 22.8°, volar tilt was 5.7°, and ulnar variance was 0.6 mm. Fracture union occurred on average at 2.6 months. The average Disabilities of the Arm, Shoulder, and Hand score was 12.0 and the average Modified Mayo Wrist Score was 83.6. Regarding the average wrist range of motion, extension was 63.8°, flexion was 53.7°, ulnar deviation was 25.1°, and radial deviation was 16.7°. Complications included delayed wound healing in 3% and delayed union in 1 patient, who eventually achieved union at 10 months after surgery. APTUS Wrist Distal Radius Plates XL 2.5 and 2.4-mm Variable Angle LCP Two-Column Volar Distal Radius Plates showed a statistically significant difference in fracture length, with the former being longer than the latter (62 mm vs. 35 mm, p < 0.001). Conclusions If the fracture length from the articular surface to the diaphysis exceeds 60 mm, we recommend preparing an extralong distal radius plate. Volar plate fixation with appropriate length selection has yielded favorable functional outcomes and few minor complications in distal radius fractures with complete intra-articular involvement and diaphyseal extension.