Background: This study explores effective fixation methods for Pauwel type III femoral neck fractures by evaluating the biomechanical benefits of adding a screw to the Femoral Neck System (FNS). Methods: Computed tomography (CT) scans of an 82-year-old female patient with an intertrochanteric fracture were used to establish a finite element femur model with heterogeneous material properties. Finite element models of Pauwel type III fractures were created with and without an additional screw. The central and inferior trajectories of the FNS bolt were examined separately and combined with an additional screw for virtual fixation. Walking and stair-climbing loads were applied. Results: With the addition of a screw, both peak maximum and minimum principal strains consistently stayed comparable or decreased in models with both central and inferior bolt trajectories, while the volume of elements with principal strain exceeding 1% decreased by more than half. The peak von Mises stress observed in the implants ranged from 215.7 to 359.3 MPa, remaining below the titanium alloy's yield strength of 800 MPa. For normal walking, the addition of a screw to the central bolt trajectory model decreased the fracture gap by 50.6% and reduced sliding distance by 8.6%. For the inferior bolt trajectory, the gap was reduced by 57.9% and sliding distance by 25.0%.Under stair-climbing conditions, these improvements were also evident; the central trajectory model saw a halved fracture gap and a 7.9% decrease in sliding distance, while the inferior trajectory model experienced a 55.7% gap reduction and a 27.2% decrease in sliding distance. The additional screw increased the area ratio of the fracture site experiencing interfragmentary compression 34%–39%, while the additional screw alleviated peak interfragmentary compression by 12%–18% under both normal walking and stair-climbing conditions. Conclusions The addition of a screw reduced the fracture gap, sliding distance, and peak interfragmentary compression, while increasing the area ratio of interfragmentary compression under both walking and stair-climbing loads, regardless of the FNS bolt trajectory, suggesting a better mechanical environment for fracture healing.

Background: Studies comparing the minimally invasive proximal chevron and Akin osteotomies (MIPCA) technique with conventional techniques, such as the open proximal chevron metatarsal osteotomy with the Akin procedure (open PCMO-Akin procedure), are limited. This study aimed to compare and evaluate operative MIPCA and open PCMO-Akin procedure outcomes in the surgical correction of moderate-to-severe hallux valgus deformities. Methods: We conducted a retrospective comparison of clinical and radiographic outcomes between the MIPCA and open PCMOAkin procedure in patients with a hallux valgus deformity, defined as a preoperative hallux valgus angle (HVA) of ≥ 30° and/or a first to second intermetatarsal angle of ≥ 13°. The postoperative complication rate was monitored in both groups for a minimum of 12 months. An unsatisfactory correction was defined as an HVA > 15° at final follow-up. Results: We assigned 58 and 99 patients to the MIPCA or open PCMO-Akin procedure group, respectively. At final follow-up, no significant differences were observed between the groups in terms of clinical and radiographic parameters (p > 0.05), with the exception of the distal metatarsal articular angle (DMAA) (p = 0.012). No statistically significant postoperative changes in the DMAA were observed in the MIPCA group (p = 0.875). Five patients (5.1%) experienced postoperative hallux varus in the open PCMO-Akin procedure group, whereas no such cases were observed in the MIPCA group. No statistically significant difference in the rate of unsatisfactory correction was observed between the groups at the final follow-up (MIPCA group, 15.5%; open PCMO-Akin procedure group, 10.1%; p = 0.315). Conclusions The MIPCA technique is a viable alternative to the open PCMO-Akin procedure for correcting moderate-to-severe hallux valgus deformities. Given the potential lack of postoperative changes in the DMAA following the MIPCA technique, careful consideration is advised when applying this technique to patients with a large DMAA.

Background: The removal of a well-fixed acetabular cup is a challenging, labor-intensive, and time-consuming step during revision hip arthroplasty. Although the advent of the manual osteotome, Explant, has simplified the procedure, it is still a stressful process as it dissipates the surgeon’s strength and time and risks an iatrogenic pelvic fracture. Recently, EZX, a powered tool for extraction of well-fixed acetabular cups with semicircular blade was invented. This study aimed to compare Explant and EZX in an experimental condition for their efficacy and safety. Methods: Cementless acetabular cups were press-fitted to 20 hemipelvic polyurethane models using foam adhesives. Ten cups were removed with each tool for comparison of the elapsed time, loads on the entire hemipelvis, periacetabular strain and temperature, volume of periacetabular bone removed, and diameter of the remaining acetabular rim. Strains and loads were quantitatively assessed using strain gauges and load cells for precise and reliable measurements. Results: The mean duration required to remove a well-fixed cup with EZX was 38.5 seconds (range, 25–55), whereas that with Explant was 543.7 seconds (range, 214–1,051) (p < 0.001). The load on the entire hemipelvis with EZX (mean, 9.1 kgf; range, 6.4–11.3) was 33% lower than that with Explant (mean, 13.6 kgf; range, 9.2–17.1) (p < 0.001). The periacetabular peak strains at the 3 positions with EZX were significantly lower than those with Explant (p < 0.001). The temperature during the removal did not differ significantly between the 2 tools. Although the mean volume of bone loss with Explant was 2.4 mL more than that with EZX (p < 0.001), the mean diameters of the remaining acetabular rim were not significantly different, measuring 54.1 mm with both tools. Conclusions The present experiment revealed that a well-fixed cup could be removed using a powered tool with less strength and time and less load on the entire pelvis. Although the powered tool removed a larger volume of bone, the diameters of the remaining acetabular rims were equivalent. This tool may help surgeons remove well-fixed cups in a short time and reduce the deforming load on the bone around the cup without increasing the size of the subsequent reconstruction cup.

Rotator cuff tears are common shoulder injuries that often necessitate surgical intervention, particularly when nonoperative treatments fail. Arthroscopic rotator cuff repair is the current gold standard; however, challenges, such as high retear rates, especially in large tears, persist. Traditional techniques, such as single-row and double-row repairs, have limitations in fully restoring the anatomical footprint and ensuring optimal healing. This review examines the novel double pulley-triple row technique, which aims to overcome these limitations by enhancing the footprint contact area, load distribution, and tendon healing. By evaluating the double pulley-triple row method in comparison to established techniques, this study explores the potential advantages, limitations, and future directions of rotator cuff repair.

Background: The novel sodium-glucose cotransporter-2 (SGLT2) inhibitor enavogliflozin effectively lowers glycosylated hemoglobin levels and body weights without the increased risk of serious adverse events; however, the long-term clinical benefits of enavogliflozin in terms of cardiovascular and renal outcomes have not been investigated. Methods: This study is an investigator-initiated, multicenter, randomized, pragmatic, open-label, active-controlled, non-inferiority trial. Eligible participants are adults (aged ≥19 years) with type 2 diabetes mellitus (T2DM) who have a history of, or are at risk of, cardiovascular disease. A total of 2,862 participants will be randomly assigned to receive either enavogliflozin or other SGLT2 inhibitors with proven cardiorenal benefits, such as dapagliflozin or empagliflozin. The primary endpoint is the time to the first occurrence of a composite of major adverse cardiovascular or renal events (Clinical Research Information Service registration number: KCT0009243). Conclusion This trial will determine whether enavogliflozin is non-inferior to dapagliflozin or empagliflozin in terms of cardiorenal outcomes in patients with T2DM and cardiovascular risk factors. This study will elucidate the role of enavogliflozin in preventing vascular complications in patients with T2DM.

Background: Patients with diabetes are known to be at high risk for end-stage kidney disease (ESKD), but the accurate annual risk data for new-onset ESKD is still limited. In South Korea, the prevalence and incidence of ESKD are increasing more rapidly compared to the global average. This study aimed to determine the incidence rate (IR) of ESKD by diabetes status from 2012 to 2022. Methods: Using data from the Korean National Health Insurance Service, we calculated the IR and hazard ratio (HR) for newonset ESKD in the general population. Individuals were categorized based on diabetes status into nondiabetes, impaired fasting glucose (IFG), diabetes duration <5 and ≥5 years. Results: Among the participants, 67.6% were nondiabetic, 22.3% had IFG, and 10% had diabetes. In Korea, the IRs of ESKD were 139 per million population (pmp) for nondiabetes, 188 pmp for IFG, 632 pmp for diabetes <5 years, and 3,403 pmp for diabetes ≥5 years. An advanced estimated glomerular filtration rate (eGFR) category was the strongest risk factor for ESKD development. However, even in patients with normal renal function, those with long-standing diabetes had a 14-fold higher risk of ESKD compared to nondiabetic individuals. The risk of ESKD associated with diabetes increased exponentially with declining renal function. Notably, IFG showed an increasing tendency for ESKD in younger patients (<65 years) with early-stage chronic kidney disease (CKD; eGFR ≥60 mL/min/1.73 m²). Conclusion Longer diabetes duration amplifies ESKD risk, particularly as renal function declines. Even in patients with normal renal function, long-standing diabetes significantly increases ESKD risk, while IFG is associated with elevated risk only in younger individuals with early-stage CKD.

Background: Active surveillance (AS) has emerged as a viable management strategy for low-risk papillary thyroid microcarcinoma (PTMC), following pioneering trials at Kuma Hospital and the Cancer Institute Hospital in Japan. Numerous prospective cohort studies have since validated AS as a management option for low-risk PTMC, leading to its inclusion in thyroid cancer guidelines across various countries. From 2016 to 2020, the Multicenter Prospective Cohort Study of Active Surveillance on Papillary Thyroid Microcarcinoma (MAeSTro) enrolled 1,177 patients, providing comprehensive data on PTMC progression, sonographic predictors of progression, quality of life, surgical outcomes, and cost-effectiveness when comparing AS to immediate surgery. The second phase of MAeSTro (MAeSTro-EXP) expands AS to low-risk papillary thyroid carcinoma (PTC) tumors larger than 1 cm, driven by the hypothesis that overall risk assessment outweighs absolute tumor size in surgical decision-making. Methods: This protocol aims to address whether limiting AS to tumors smaller than 1 cm may result in unnecessary surgeries for low-risk PTCs detected during their rapid initial growth phase. By expanding the AS criteria to include tumors up to 1.5 cm, while simultaneously refining and standardizing the criteria for risk assessment and disease progression, we aim to minimize overtreatment and maintain rigorous monitoring to improve patient outcomes. Conclusion This study will contribute to optimizing AS guidelines and enhance our understanding of the natural course and appropriate management of low-risk PTCs. Additionally, MAeSTro-EXP involves a multinational collaboration between South Korea and Australia. This cross-country study aims to identify cultural and racial differences in the management of low-risk PTC, thereby enriching the global understanding of AS practices and their applicability across diverse populations.

Background: This study aimed to evaluate the applicability of deep learning technology to thyroid ultrasound images for classification of thyroid nodules. Methods: This retrospective analysis included ultrasound images of patients with thyroid nodules investigated by fine-needle aspiration at the thyroid clinic of a single center from April 2010 to September 2012. Thyroid nodules with cytopathologic results of Bethesda category V (suspicious for malignancy) or VI (malignant) were defined as thyroid cancer. Multiple deep learning algorithms based on convolutional neural networks (CNNs) —ResNet, DenseNet, and EfficientNet—were utilized, and Siamese neural networks facilitated multi-view analysis of paired transverse and longitudinal ultrasound images. Results: Among 1,048 analyzed thyroid nodules from 943 patients, 306 (29%) were identified as thyroid cancer. In a subgroup analysis of transverse and longitudinal images, longitudinal images showed superior prediction ability. Multi-view modeling, based on paired transverse and longitudinal images, significantly improved the model performance; with an accuracy of 0.82 (95% confidence intervals [CI], 0.80 to 0.86) with ResNet50, 0.83 (95% CI, 0.83 to 0.88) with DenseNet201, and 0.81 (95% CI, 0.79 to 0.84) with EfficientNetv2_ s. Training with high-resolution images obtained using the latest equipment tended to improve model performance in association with increased sensitivity. Conclusion CNN algorithms applied to ultrasound images demonstrated substantial accuracy in thyroid nodule classification, indicating their potential as valuable tools for diagnosing thyroid cancer. However, in real-world clinical settings, it is important to aware that model performance may vary depending on the quality of images acquired by different physicians and imaging devices.

Background: Sclerostin, initially recognized for its pivotal role in bone metabolism, has gained attention for its multifaceted impact on overall human health. However, its influence on frailty—a condition that best reflects biological age—has not been thoroughly investigated. Methods: We collected blood samples from 244 older adults who underwent comprehensive geriatric assessments. Sclerostin levels were quantified using an enzyme-linked immunosorbent assay. Frailty was assessed using two validated approaches: the phenotypic model by Fried and the deficit accumulation frailty index (FI) by Rockwood. Results: After controlling for sex, age, and body mass index, we found that serum sclerostin levels were significantly elevated in frail individuals compared to their robust counterparts (P<0.001). There was a positive correlation between serum sclerostin concentrations and the FI (P<0.001). Each standard deviation increase in serum sclerostin was associated with an odds ratio of 1.87 for frailty (P=0.003). Moreover, participants in the highest quartile of sclerostin levels had a significantly higher FI and a 9.91-fold increased odds of frailty compared to those in the lowest quartile (P=0.003 and P=0.039, respectively). Conclusion These findings, which for the first time explore the association between circulating sclerostin levels and frailty, have significant clinical implications, positioning sclerostin as one of potential blood-based biomarkers for frailty that captures the comprehensive physical, mental, and social aspects of the elderly, extending beyond its traditional role in bone metabolism.