BACKGROUND: E2/nonstructural protein 1 (E2/NSl) glycoprotein of hepatitic C virus (HCV) is most variable region of HCV and appears to cause positive selection of escape mutants, which may play a role in the mechanism of persistent viral infection. We analyzed the sequence diversity of E2/NSl of HCV from twelve Koreans. METHODS: The nucleotide and deduced amino acid sequences of the putative E2/NSl region of HCV were determined by analysis of twelve independent amplified CDNA clones obtained from Korean patients with chronic hepatitis and primary hepatocellular carcinoma, using dideoxynucleotide chain termination method. RESULTS: High level of variations in both nucleotide and amino acid sequences were observed in the hypervariable region 1 and 2 (HVR1 and HVR2). Sequences of HVR1, situated at the nucleotide positions from 1478 to 1552 (amino acid positions : from 383 to 407), showed from 27.8 to 94.4% diversity at the nucleotide level and from 25.0 to 87.5% diversity at the amino acid level. 4 few amino acid residues (amino acid positions: 384, 388, 389 405, 406) within HVR1 were highly conserved in most cases. Sequences of HVR2, situated at the nucleotide positions from 1736 to 1774 (amino acid positions from 469 to 481). Two groups of highly conserved amino acid sequences were observed in the HVR2 of twelve Korean cases, indicating that there are type specific conservation in the HVR2 region. 4 large part of the eave lope region located at the nucleotide positions from 1832 to 1892 (amino acid positions : from 501 to 521) was highly conserved, to show 100% Identity of amino acid sequences. The positions of six putative N-glycosylation sites were highly conserved. The percent diversities of nucleotide of E2/NSl was from 60.4% to 92.7% and the percent diversities of amino acid of E2/NSl was from 57.6% to 95.5% among twelve Korean HCV clones. CONCLUSION: Extensive genetic variations including two hypervariable regions were clustered and interspersed with highly conserved nucleotides sequences in E2/NSl region of HCV isolated from Koreans.
Amino Acid Sequence ; Carcinoma, Hepatocellular ; Clone Cells ; DNA, Complementary ; Genetic Variation ; Glycoproteins ; Hepacivirus* ; Hepatitis C* ; Hepatitis* ; Hepatitis, Chronic ; Humans ; Nucleotides ; United Nations

BACKGROUND: E2/nonstructural protein 1 (E2/NSl) glycoprotein of hepatitic C virus (HCV) is most variable region of HCV and appears to cause positive selection of escape mutants, which may play a role in the mechanism of persistent viral infection. We analyzed the sequence diversity of E2/NSl of HCV from twelve Koreans. METHODS: The nucleotide and deduced amino acid sequences of the putative E2/NSl region of HCV were determined by analysis of twelve independent amplified CDNA clones obtained from Korean patients with chronic hepatitis and primary hepatocellular carcinoma, using dideoxynucleotide chain termination method. RESULTS: High level of variations in both nucleotide and amino acid sequences were observed in the hypervariable region 1 and 2 (HVR1 and HVR2). Sequences of HVR1, situated at the nucleotide positions from 1478 to 1552 (amino acid positions : from 383 to 407), showed from 27.8 to 94.4% diversity at the nucleotide level and from 25.0 to 87.5% diversity at the amino acid level. 4 few amino acid residues (amino acid positions: 384, 388, 389 405, 406) within HVR1 were highly conserved in most cases. Sequences of HVR2, situated at the nucleotide positions from 1736 to 1774 (amino acid positions from 469 to 481). Two groups of highly conserved amino acid sequences were observed in the HVR2 of twelve Korean cases, indicating that there are type specific conservation in the HVR2 region. 4 large part of the eave lope region located at the nucleotide positions from 1832 to 1892 (amino acid positions : from 501 to 521) was highly conserved, to show 100% Identity of amino acid sequences. The positions of six putative N-glycosylation sites were highly conserved. The percent diversities of nucleotide of E2/NSl was from 60.4% to 92.7% and the percent diversities of amino acid of E2/NSl was from 57.6% to 95.5% among twelve Korean HCV clones. CONCLUSION: Extensive genetic variations including two hypervariable regions were clustered and interspersed with highly conserved nucleotides sequences in E2/NSl region of HCV isolated from Koreans.
Amino Acid Sequence ; Carcinoma, Hepatocellular ; Clone Cells ; DNA, Complementary ; Genetic Variation ; Glycoproteins ; Hepacivirus* ; Hepatitis C* ; Hepatitis* ; Hepatitis, Chronic ; Humans ; Nucleotides ; United Nations

Since that first description of the so-called granular cell myoblastoma by Abrikossoff in 1926, it has been reported as occuring in many sites. This tumor is an unusual but not rare tumor. From the number of reviewed case reports(550) upto now, it appears that the occurence of multiple granular cell tumors (36) is much more common (7–16%) than traditionally believed. The precise histogenesis of this tumor is open to question. Most of this tumor is benign, but malignant ones have been reported. A case of malignant granular cell myoblastoma which was histologically proven and metastasized to the coracoid process of left scapula, the lung, and the skull, is presented with a brief of the literature.
Axilla ; Granular Cell Tumor ; Lung ; Sarcoma, Alveolar Soft Part ; Scapula ; Skull

No abstract available.

The purpose of this study was to evaluate and compare the fit of denture bases processed by injection pressing technic using laser scanner of reverse engineering technic. The auther duplicated 20 maxillary edentulous models and 20 mandibular edentulous models, which were scanned on HYSCAN 45C 3D SCANNER(Hymarc Co., Canada). The scanned data was stored in the personal computer using SURFACER (Imageware Co., U.S.A.) software program. After 40 dentures were cured by PERform Inkovac system. SR-Ivocap system, Palajet system, and Sulfon system, they were stored in water at room temperature for 24 hours. The dentures were scanned on HYSCAN 45C 3D SCANNER(Hymarc Co. Canada). The scanned data were stored in the personal computer using SURFACER (Imageware Co., U.S.A) software program. By overlapping two images using the same program, the fit between two surfaces was scaled by positive and negative errors. The obtained results were as follows : 1. In the upper denture, most of the positive errors occurred on the lingual side of anterior alveolar ridge and the negative errors were on the flange of denture bases. 2. In the lower denture, most of the positive errors occurred on the inner side of lingual flange and the negative errors were on the border of anterior labial flange areas. 3. There were no statistical differences among the positive errors of the four types of inject-ion denture curing methods and also no statistical differences between negative errors except only in negative maximum errors. 4. In PRERform system and SR-Ivocap system, they have the tendency of inaccurate fit lower denture bases comparing to that of upper denture bases. 5. The negative error scales were greater than the positive error scales in all types of inject-ion denture curing methods.
Alveolar Process ; Denture Bases* ; Dentures* ; Microcomputers ; Water ; Weights and Measures

The purpose of this study was to compare the accuracy of currently used elastomeric impression materials for complete arch impression taking. Five elastomers (Impregum, Permlastic, Express, Extrude, Examix) and one Irreversible hydrocolloid (Aroma-fine) were tested. For each material, 5 impressions were made of stainless steel model to which five tapered posts were attached. Custom trays were used for polyether and polysulfide impression materials, and putty/wash two step technique was used for addition polyvinylsiloxane impression materials. Improved stone models were poured to all impressions. Accuracy of the materials was assessed by measuring ten distances on stone dies poured from impressions of the master model. All measurements for master and improved stone models were with three dimensional measuring machine. The results were as follows 1. The dimensional accuracy of polyether, extrude, and examix were significantly superior to polysulfide, exress, and alginate in reproducing full arch mode (p<0.05). 2. There were no statistical differences in dimensional accuracy for full arch impression between polyether, extrude and examix (p>0.05). 3. there were no statistical differences in dimensional accuracy between polysulfide, express, and alginate (p>0.05). 4. There were no statistical differences between addition polyvinyl siloxane materials (p>0.05). 5. There were no statistical differences between anterior-posterior and lateral dimensional changes of all impression materials (p>0.05).
Colloids ; Elastomers* ; Polyvinyls ; Siloxanes ; Stainless Steel

No abstract available.
Schizophrenia*

No Abstract Available.
Catalase* ; Streptococcus pneumoniae* ; Streptococcus*

The indirect technique for making cast restoration requires that dies be as accurate and durable as possible. Currently, stone is the most commonly used material for die. However, it has some problems such as the weakness in its strength and low abrasion resistance. Recently, epoxy resin die systems have become available. The purpose of this study was to examine two commercially available resin die systems and evaluate some characteristics for their clinical performance. This study evaluated the dimensional accuracy of epoxy resins and their wettability with impression materials. In this study, the first experiment was about dimensional accuracy of different die materials. The master model was made of stainless steel. 10 models were made of two epoxy resins (Die-epoxy, Tri-epoxy) and a die stone (Fujirock) each. Occlusal diameter (Dimension I), occluso-gingival height (Dimension II), and interabutment distance (Dimension III) wee measured in each model. Next, the contact angles of die materials with impression materials were observed. The blocks were made of polyether, hydrophilic additional silicone, polysulfide impression materials. By dropping the same amount (0.05ml) of Tri-epoxy, Die-epoxy, and die stone on the blocks, 10 samples of each die material were made. After setting of materials, the contact angles were measured. The results of this study were as follows. 1. The expansion of stone die and the shrinkage of resin dies in occlusal diameter were observed, and stone and Tri-epoxy were expanded and Die-epoxy was shrinked in occluso-gin-gival height. There was little change among materials in interabutment distance (p>0.05). 2. In comparison with the mater model, Tri-epoxy had the least variation in measurement of the three die systems examined. Did-epoxy was next, and die stone showed the greatest variation. 3. The compatibility of die stone for polyether, hydrophilic additional silicone, polysulfide decreased in order, wherease epoxy materials had the decreased compatibility for polyether and polysulfide, hydrophilic additional silicone in order. It was not statistically different between polyether and polysulifide (p>0.05). 4. The contact angles of Tri-epoxy, Die-epoxy, die stone were getting bigger in order.
Epoxy Resins* ; Silicones ; Stainless Steel ; Wettability

No abstract available.
Aldosterone* ; Child* ; Humans ; Nephrosis, Lipoid*