DNA flow cytometric analysis was performed on paraffin-embedded tissue from 10 cases of squamous cell eareinoma (SCC) and 10 cases of basal cell carcinoma(BCC). These results were applicable to do a better prognosis in BCC than SCC. In 10 cases of SCC, the DNA index was 1.34 and aneuploidy was identified in 9. In 10 cases of BCC, the DNA index was 1.30 and aneuploidy was identified in 6.
Aneuploidy ; Carcinoma, Basal Cell* ; Carcinoma, Squamous Cell* ; DNA* ; Flow Cytometry* ; Prognosis ; Skin*

We report a case of generalized plane xanthoma which showed no-rmolipoproteinemia and was not associated with unerlying disorders or other type of xanthomas. A 48-year-old female has noticed well defined, slightly elevated, yellowish plaques which occurred on the periorbital areas, sides of the neck, scapular areas, anterior chest, buttocks and lower extremities for 3 years. Biopsy specimen taken from the neck showed perivascular accumulations of foam cells in the upper and mid dermis. Paper electrophoresis didn't, show elevation of any lipoprotein.
Biopsy ; Buttocks ; Dermis ; Electrophoresis, Paper ; Female ; Foam Cells ; Humans ; Lipoproteins ; Lower Extremity ; Middle Aged ; Neck ; Thorax ; Xanthomatosis*

All-ceramic restorations have become an attractive alternative to porcelain-fused-to-metal crowns. In-Ceram, and more recently IPS Empress 2 were introduced as a new all-ceramic system for single crowns and 3-unit fixed partial dentures. But their strength and marginal fit are still an important issue. This study evaluated the fracture resistance and marginal fit of three systems of 3 unit all-ceramic bridge fabricated on prepared maxillary anterior resin teeth in vitro. The 3 all-ceramic bridge systems were: (1) a glass-infiltrated, sintered alumina system (In-Ceram) fabricated conventionally, (2) the same system with copy-milled alumina cores (copy-milled In-Ceram), (3) a heat pressed, lithium disilicate reinforced glass-ceramic system (IPS Empress 2). Ten bridges of each system with standardized design of framework were fabricated. All specimens of each system were compressed at 55degree at the palatal surface of pontic until catastrophic fracture occurred. Another seven bridges of each system were fabricated with standard method. All of the bridge-die complexes were embedded in epoxy resin and sectioned buccolingually and mesiodistally. The absolute marginal discrepancy was measured with stereomicroscope at x50 power. The following results were obtained: 1. There was no significant difference in the fracture strength among the 3 systems studied. 2. The Weibull modulus of copy-milled In-Ceram was higher than that of In-Ceram and IPS Empress 2 bridges. 3. Copy-milled In-Ceram (112micrometer) exhibited significantly greater marginal discrepancy than In-Ceram (97micrometer), and IPS Empress 2 (94micrometer at P=0.05. 4. The lingual surfaces of the ceramic crowns showed smaller marginal discrepancies than mesial and distal points. There was no significant difference between teeth (incisor, canine) at P=0.05. 5. All-ceramic bridges of three systems appeared to exhibit sufficient initial strength and acceptable marginal fit values to allow clinical application.
Aluminum Oxide ; Ceramics ; Crowns ; Denture, Partial, Fixed ; Hot Temperature ; Lithium ; Tooth

BACKGROUND: The aim of this study was to compare the efficacy of ketorolac, paracetamol, and paracetamol plus morphine on pain relief after thyroidectomy. METHODS: Eighty patients were randomly allocated to one of the 4 groups: normal saline (group C), ketorolac 30 mg (group K), paracetamol 1 g (group P), and paracetamol 700 mg plus morphine 3 mg (group PM). Each regimen was administered intravenously (IV) 30 min. before the end of surgery. If pain was not relieved, patients received an IV bolus of pethidine hydrochloride 25 mg. Pain intensity using a visual analogue scale (VAS) was recorded at 0.5, 1, 2, 4, and 6 hr after the end of surgery. RESULTS: VAS at 0.5 and 1 hr after the end of surgery were significantly lower in group K, group P, and group PM than in group C (P < 0.05). The number of patients receiving pethidine hydrochloride at 0.5 and 1 hr after the end of surgery was significantly lower in group K, group P, and group PM than in group C (P < 0.05). There was no significant difference among the groups in the incidences of adverse events associated with study medications and patient satisfaction (P > 0.05). CONCLUSIONS: Paracetamol 1 g IV possesses a similar analgesic efficacy to ketorolac 30 mg IV after thyroidectomy. Paracetamol may represent an alternative to ketorolac for pain prevention after mildly to moderately painful surgery in situations where the use of NSAIDs is unsuitable.
Acetaminophen ; Analgesics ; Anti-Inflammatory Agents, Non-Steroidal ; Humans ; Incidence ; Ketorolac ; Meperidine ; Morphine ; Patient Satisfaction ; Thyroidectomy

The shape of the thyroid gland was similarly described in many anatomical text books, but we observed that the shape of the thyroid gland was very diverse in the dissecting room. This study was performed to clarify the morphologic characteristics of the thyroid gland in Koreans. One hundred sixty eight Korean adult cadavers were used for this study. It was 57.1% that the size and the location of both lobes were symmetric. The frequency of the existence of the Pyramidal lobe was 76.8%. The pyramidal lobe located in the left, right, and middle of the isthmus were 48.8%, 26.4%, and 21.7% respectively. And the pyramidal lobes located in the both sides of the isthmus were 3.1% of the cases. The thyroid gland was classified into six types. Type I in which the thyroid gland had the classical H shape and the relatively wide isthmus was observed in 31.5%. Type II in which the thyroid isthmus could be distinguished but the distance between two lobes was very short was found in 28.0%. In type III, the inferior margins of the isthmus and the lateral lobes made a straight line (29.2%). In type IV, two lateral lobes of the thyroid gland were directly fused and the isthmus was not distinguished (5.4%). In type V, the thyroid gland had no isthmus and the lateral lobes were separated (3.0%). Type VI was not belonged to five types because of its irregular shape (3.0%). The incidence of the classical thyroid gland described in the text books was 12.5% in Korean adults.
Adult* ; Cadaver ; Humans ; Incidence ; Thyroid Gland*

In 1962, a case of “generalized skeletal dysplasia with multiple anomalies” was reported by Taybi as a new clinical syndrome. The most characteristic features of the syndrome seemed to be hearing loss, cleft palate and peculiar digital anomalies, so, the syndrome designated as otopalatodigital syndrome by Dudding, et al. Recently, the authors have experienced a case of OPD syndrome who visited Yeungnam University Hospital with the chief complaint of hypernasality, and underwent pharyngoplasty for correction of VPI. We present here a new case and review the literature on the subject.
Cleft Palate ; Hearing Loss

The T cell responses to hepatitis B surface antigen (HBsAg) were analyzed in acute hepatitis patients, chronic active hepatitis (CAH) patients and asymptomatic carriers. Neither proliferative responses nor substantial cytokine production of peripheral blood mononuclear cells (PBMC) in response to HBsAg was detected. For further studies, HBsAg- reactive T cell lines were prepared from PBMC of the hepatitis patients and asymptomatic carriers. No proliferative response of the T cell lines was observed. Interestingly, however, T cell lines obtained from acute hepatitis patients were found to produce IFN-r, but not IL- 4, in response to HBsAg stimulation, whereas T cell lines obtained from CAH patients and carriers were not. Results of this study suggest that HBsAg-reactive T cells producing Thl type cytokines may play an important role in the viral clearance during acute infections, while defects in those T cells may be responsible for the viral persistency.
Cell Line ; Cytokines ; Hepatitis ; Hepatitis B Surface Antigens* ; Hepatitis, Chronic ; Humans ; T-Lymphocytes*

The major influencing factors on the strength of all-ceramic crowns are types of dental ceramics, fabrication techniques, methods of abutment preparation and cementation modes of all ceramic restorations. Zine phosphate cement and glass-ionomer cement were used as an early luting media for all-ceramic crowns. Recently many studies have reported that resin cements have more advantages in increasing the fracture strength of restorations comparing with zincphosphate cement and glass-ionomer cement. The purpose of this study is to investigate the effect of etching, silane treatment, sandblasting and dentin bonding agents on fracture strengths of dental ceramics. 40 flat dentin specimens and 40 ceramic discs of 1.5mm thickness and 8mm diameter were fabricated, and divided into 4 groups according to surface treatments. Surface treatments before cementation were as follows. Group I : (ceramic) : HF etching - silane treatment - application of bonding resin (dentin) : application of dentin bonding agent Group II : (ceramic) : sandblasting - application of bonding resin (dentin) : application of dentin bonding agent Group III : (ceramic) : application of bonding resin (dentin) : application of dentin bonding agent Group IV : (ceramic) : HF etching - silane treatment - application of bonding resin (dentin) : no dentin bonding procedure Dentin specimens and ceramic discs were cemented with dual cure resin cement, and went through thermocycling. Compressive stress es were loaded on the centers of ceramic discs with Instron testing machine, and fracture strengths resista' nce for catastrophic fracture were measured The results were as follows. 1. The group I showed the highest fracture resistance. The next was group II. And group III, IV followed. 2. There was a significant difference in the mean value of fracture strengths between group I and group III (p<0.05), but no significant differences between group I and group II, and group II and group III (p>0.05). 3. There was a significant difference in the mean value of fracture strengths between group I and group IV (p<0.05).
Cementation ; Ceramics* ; Crowns ; Dentin ; Dentin-Bonding Agents ; Glass Ionomer Cements ; Resin Cements

In order to evaluate the genotoxic hazard among workers potentially exposed to low level petrochemical substances, the analyses of micronuclei (MN) and sister chromatid exchanges (SCEs) in lymphocytes were performed in 46 male workers (as exposed group) and 46 nonexposed subjects (as control group). Mean frequencies of MN and SCEs (respectively, 12.9/1000 cells and 6.5/cell) in exposed group were very significantly higher than those (10.2/1000 cells and 5.4/cell) in control group. And there were also significant differences in mean frequencies of MN and SCEs adjusted for age, employment duration, smoking, and drinking between two groups. Median frequencies of MN and SCEs in exposed group were very significantly higher than those in control group. Frequencies of SCEs were higher in smokers than in non-smoker. Frequencies of MN in smokers, however, were similiar to those of non-smoker. Interaction between exposure and smoking on MN and SCEs induction was not observed. The results suggest that there is genotoxic hazard in high risk group like workers handling carcinogens in petrochemical plants and the analyses of MN and SCEs are useful biomarkers for the exposure to hazard substances even at the level below the exposure limit.
Biological Markers ; Carcinogens ; Drinking ; Employment ; Humans ; Lymphocytes ; Male ; Sister Chromatid Exchange ; Smoke ; Smoking

This investigation evaluated the fracture toughness (KIC) of eight currently available core materials, and relate the fracture toughness value to fractography analysis and surface characteristics using a atomic force microscope (AFM). Single-edge notched (SEN) test specimens (n=10) and compact tension (CT) test specimens (n=10) were prepared conforming to the ASTM Standard E-399 for a high copper amalgam, three composite core materials (Core-Max II, Core Paste, Bisfil Core), two reinforced composite core materials (Ti-Core, Ti-Core Natural), a resin-modified glass ionomer core material (Vitremer), and a conventional glass ionomer core material (Ketac-Molar). The specimens were tested with an Instron Universal Testing Machine. The maximum loads were measured to calculate the fracture toughness (KIC). Thereafter, fracture surfaces of SEN specimens of each material were investigated for fractography analysis using scanning electron microscope. And, disc-shaped specimens with 1mm thickness were fabricated for each material and were investigated under AFM for surface morphology analysis. The results were as follows : 1. Bisfil Core showed the highest mean fracture toughness regardless of test methods. 2. For the tooth-colored materials, Ti-Core Natural exhibited the highest fracture toughness. 3. Ketac Molar showed a significantly low fracture toughness when compared with the amalgam and the composite resin core materials (p<0.05). 4. The fracture toughness values obtained with the single-edge notched test, except Ketac Molar, were higher than those obtained in the compact tension test. 5. SEM revealed that the fracture surface of high fracture toughness material was rougher than that of low fracture toughness material. 6. AFM revealed that the surface particles of the composite resins were smaller in size, with a lower surface roughness than the glass ionomer core materials.
Composite Resins ; Copper ; Glass ; Molar