1.A comparative study of pre- and post-treatment cephalometric measurements : extraction vs. non-extraction groups of Class I malocclusion.
Hyung Seog YU ; Hyoung Seon BAIK
Korean Journal of Orthodontics 1997;27(5):761-770
71 Class I maloccousion samples were selscted and they were divided into premolar-extraction and non-extraction groups. Vertical and horizontal cephalometric evaluations on dental and soft tissue measurements were done before and after treatment. Also, treatment results in adolescent patients and adult patients were compared. The following conclusions were obrained: 1. In comparison of extraction and non-extraction groups, all the dental and soft tissue measurements, with exception of SN-MP angle, upper lip to E-line, vertical movement of upper first molar, and horizintal movement of lower first molar, showed statistically significant differences. 2. In comparison of extraction and non-extraction groups of adolescent samples, there were statistically significant differences in upper and lower incisor inclinations, horizontal dental movements from vertical reference line, positional changes in upper and lower lips, and mesial movements of upper first molar. 3. In comparison of extraction and non-extraction groups of adult samples, there were statistically sigmificant differences in upper and lower incisor inclinations, horizintal dental movements from vertical reference line, positional changes in upper and lower lips from E-line and vertical reference line, vertical hright of upper first molar, and mesial morement of lower first molar. 4. There was no statistically significant difference in SN-MP angle between extraction and non-extraction groups od both adolescent and adult samples.
Adolescent
;
Adult
;
Humans
;
Incisor
;
Lip
;
Malocclusion*
;
Molar
2.A comparison study of the effects of hypertrophied adenoid tissue on jaws morphology.
Sun Hyung PARK ; Hyung Seog YU
Korean Journal of Orthodontics 2002;32(1):19-31
To investigate the association between the hypertrophy of adenoid and jaw morphology during growth, this paper was based on children patients with experimental adenoids (male-15 subjects at each bone age group, female-15 subjects at each bone group) and comparing them to data taken from a control group (male-15 subjects at each bone age group, female-15 subjects at each bone group) with normal respiratory function. The comparisons between the groups were done at each growth stage using cervical vertebrae maturation index(CVMI) of Hassel. The obtained results were as follows: 1. The differences in craniofacial morphology between experimental group and control group were appeared from CVMI 3 and CVMI 4 (aroud adolescent period) in males, and from CVMI 1 in females. 2. The mandibular position of experimental group was more inferior than control group. The difference appeared at adolescent period(male: at CVMI 4, female: at CVMI 5). 3. Experimental group had greater anterior facial height than control group. This difference seemed a relation with lower anterior facial height. The difference appears at CVMI 3(11.94+/-1.38 years old, at adolescent period) in male and at CVMI 1 in female. 4. The adenoid size of control male group was increased until CVMI 2(10.58+/-1.07 years old, just before adolescent growth peak) and then decreased, but in female the adenoid size was decreased from CVMI 1(6.92+/-0.53 years old).
Adenoids*
;
Adolescent
;
Cervical Vertebrae
;
Child
;
Female
;
Humans
;
Hypertrophy
;
Jaw*
;
Male
3.Three-dimensional evaluation of maxillary anterior alveolar bone for optimal placement of miniscrew implants.
Jin Hwan CHOI ; Hyung Seog YU ; Kee Joon LEE ; Young Chel PARK
The Korean Journal of Orthodontics 2014;44(2):54-61
OBJECTIVE: This study aimed to propose clinical guidelines for placing miniscrew implants using the results obtained from 3-dimensional analysis of maxillary anterior interdental alveolar bone by cone-beam computed tomography (CBCT). METHODS: By using CBCT data from 52 adult patients (17 men and 35 women; mean age, 27.9 years), alveolar bone were measured in 3 regions: between the maxillary central incisors (U1-U1), between the maxillary central incisor and maxillary lateral incisor (U1-U2), and between the maxillary lateral incisor and the canine (U2-U3). Cortical bone thickness, labio-palatal thickness, and interdental root distance were measured at 4 mm, 6 mm, and 8 mm apical to the interdental cementoenamel junction (ICEJ). RESULTS: The cortical bone thickness significantly increased from the U1-U1 region to the U2-U3 region (p < 0.05). The labio-palatal thickness was significantly less in the U1-U1 region (p < 0.05), and the interdental root distance was significantly less in the U1-U2 region (p < 0.05). CONCLUSIONS: The results of this study suggest that the interdental root regions U2-U3 and U1-U1 are the best sites for placing miniscrew implants into maxillary anterior alveolar bone.
Adult
;
Cone-Beam Computed Tomography
;
Female
;
Humans
;
Incisor
;
Male
;
Tooth Cervix
4.A study on skeletal relapse patterns following orthognathic surgery of Class III patients : comparison between SSRO and IVRO.
Jang Yeol LEE ; Hyung Seog YU ; Young Kyu RYU
Korean Journal of Orthodontics 1998;28(3):461-477
To evaluate the relapse pattern and long-term stabilities depanding on surgical methods following orthognathic surgery of Cl III patients, the author selected 24 subjects(10 male, 14 female) operated by SSRO and 26 subjects(10 male, 16 female) operated by IVRO. Each subject took four lateral cephalograms: just before surgery(Tl), within 48hrs after surgery(T2), 4-8 wks after surgery(T3), 6 month or more after surgery(T4), and the landmarks were digitized. The differences of relapse patterns in each interval between two groups were compared and the significance of correlation among the variables of each group was tested The obtained results are as follows; 1. Horizontal early relapse was forward movement of mandible in SSRO group, as compared to the backward movement in IVRO group, and there was a statistical significance between the two groups. 2. Vertical early and late relapses were decreases in anterior facial height in both groups and there was no statistical significance between the two groups. 3. There was a statistical significance in negative correlation between mandibular hornontal late relapse and surgical change of articular angle in SSRO group. 4, There was a statistical significance in negative correlation between amount of mandibular set-back and mandibular horizontal early relapse in both groups.
Humans
;
Male
;
Mandible
;
Orthognathic Surgery*
;
Recurrence*
5.A morphologic characteristics study on crown of lingual surface with normal occlusion in Korean adults.
Hyung Seog YU ; Young Chel PARK
Korean Journal of Orthodontics 1992;22(3):675-690
The purpose of this study was to obtain the lingual morphology (size, angulation, contour, eminence) of adults with normal occlusion in order to provide the basic data for lingual bracket and lingual arch form in Korean. The subjects (Male: 50, Female: 50) were selected who have normal occlusion and dental casts were prepared. Tooth size, angulation, arch width, horizontal contour, lingual eminence were measured for all 28 teeth both upper and lower arch. The results were as follows: 1. Measuring items of all individual teeth for adults with normal occlusion were obtained. 2. In comparison tests, there was a statistically difference between intermolar widths (6 to 6) before occlusal reduction and intermolar width (6 to 6, 7 to 7) after occlusal reduction only, all the other measuring items showed no statistically differences. 3. There was small variation in horizontal contour of lingual surface on lower incisors and upper and lower bicuspids. The other teeth showed somewhat greater variations. 4. There was offset between canine and bicuspid in upper arch while there was no prominent offset in lower arch.
Adult*
;
Bicuspid
;
Crowns*
;
Female
;
Humans
;
Incisor
;
Tooth
6.Study on masticatory pattern of adult having anterior cross bite.
Byung Wha SOHN ; Hyung Seog YU ; Jong Jin PARK
Korean Journal of Orthodontics 1997;27(1):35-44
mastication is basically regulated by central pattern regulator(CPG) of brain system target organ output from CPG is modulated by oral sensory feedback. anterior cross bite pattern infuluence the feedback mechanism and change muscle activity and jaw movement. .The purpose of this study was to investigate diffemce anterior cross bite group from normal group. the selected sample groups were 30 normal patient, 30 anterior cross bite patient. EMG and EGN of Biopak system were used for this study The following results were obtained 1. In resting state of mandible, anterior cross-bite showed the high r muscle activities in all the muscle.(exeeption:left digastric muscle) than normal group. 2. In clenching state, No significant difference in muscle activities of normal group and anterior cross bite group was noticed 3. In swallowing state Normal group showed the higher muscle activities in left and right masseter muscle, right posterior temporal muscle. 4. In maximum opening and closing velocity, normal group showed the higher value than anterior cross-bite. 5. In the mean value of the maximum operiing,the maximum anterior-posterior movement from centric-occlusion, the lateral deviation from centric-occclusion, normal group showed the higher value than anterior cross-bite group.
Adult*
;
Brain
;
Deglutition
;
Feedback, Sensory
;
Humans
;
Jaw
;
Malocclusion*
;
Mandible
;
Masseter Muscle
;
Mastication
;
Temporal Muscle
7.A posteroanterior cephalometric study on craniofacial proportions of Koreans with normal occlusion.
Hyoung Seon BAIK ; Hyung Seog YU ; Kie Joo LEE
Korean Journal of Orthodontics 1997;27(4):643-659
For the total treatment of skeletal malocclusions, 3-dimensional evaluation and diagnosis are essential. Although anteroposterior discrepancies can be evaluated through various methods, the satisfactory methods for evaluations of facial asymmetry and transverse discrepancies are yet to be found. The adequate diagnosis and treatment of transverse discrepancies may be more important in the maintenance of functional occlusion as well as for the stability of results obtained from orthognathic surgery than the anteroposterior or vertical discrepancies. Since the soft tissue effects from the transverse discrepancies may not be pronounced, especially when combined with anteroposterior or vertical discrepancies which have prominent characteristics, the differentiation of their effects may be difficult from visual inspection alone. Therefore it is essential that the normal facial proportions would be established from the posteroanterior cephalometry as a reference for the accurate diagnosis and treatment. The present study evaluates 76 subjects from Yonsei University freshmen with normal facial symmetry and occlusion. Posteroanterior cephalograms were taken from the subjects and the normal values and facial proportions are obtained. The results are as follows. 1. The transverse and vertical values from posteroanterior cephalometry and their ratio, with means and standard deviations are calculated. 2. The ratio of vertical values to transverse values is 0.837 (male 0.836, female 0.841). 3. The proportion of maxillary and mandibular widths is 0.747 (male 0.745, female 0.752), with statistically significant correlation. 4. Various degree of significant correlations are observed in the following craniofacial widths; (Cranial width, Bizygomaticofrontal suture width, Facial width, Maxillary width, Upper & Lower Intermolar width, Mandibular width). 5. Although the facial height as well as other line measurements increase as the facial widths increase, angle measurement (Bjork Sum, Mandibular Plane Angle, Gonial Angle), decreases and posterior to anterior facial height ratio increases, therefore indicating the tendency for a brachycephalic facial type. These results may be used as references for the treatment planning in orthognathic and orthodontic treatments for the dentofacial deformity patients.
Cephalometry
;
Dentofacial Deformities
;
Diagnosis
;
Facial Asymmetry
;
Female
;
Humans
;
Malocclusion
;
Orthognathic Surgery
;
Reference Values
;
Sutures
8.A study on profile change and stability of treatment after wearing face mask.
Young Chel PARK ; Ja Young SHIN ; Hyung Seog YU
Korean Journal of Orthodontics 1997;27(1):1-20
Skeletal Class III malocclusions are growth-related discrepancies, and the problems are more severe until growth is complete. Causes of skeletal Class III malocclusion are classified into mandibular overgrowth, maxillary deficiency, and combination of the two. Face mask has been recommended for treatment of Class M malocclusion with maxillary deficiency in the early time of growth. Numerous experiments were performed and clinical studies have been reported on face mask ; nevertheless, studies on profile changes and stability after treatment of face mask are considered to be somewhat insufficient. The author selected 50 patients who can be checked for follow-up. They had been diagnosed as skeletal Class III malocclusion with maxillary deficiency and then treated with face mask ; the sample group was divided according to sex, treatment beginning age, palatal suture opening(intraoral appliance). For each group, changing pattern of facial profile and stability of treatment observed, and comparison with 20 Korean normal children(Angle's Class I ). The following results were obtained. 1. Skeletal, dental, and soft tissue measurements indicated more changes in the amounts of maxillary forward movement during face mask treatment. 2. R.P.E. group showed more significant maxillofacial changes and La-Li group showed more dental changes. 3. Growth changes of maxilla induced in the treatment group during wearing face mask were much more than those of normal group. 4. Growth changes of maxilla in the treatment group after treatment of face mask were less than those of normal group. From the obtained data, it can be concluded that. there was a stimulative effect on forward growth of maxilla during the use of face mask however, on removal of face mask, the stimulative effect was eliminated and undergrowth tendency of maxilla resumed.
Follow-Up Studies
;
Humans
;
Malocclusion
;
Masks*
;
Maxilla
;
Sutures
9.Histomorphometric evaluation of the bone surrounding orthodontic miniscrews according to their adjacent root proximity.
Hyun Ju OH ; Jung Yul CHA ; Hyung Seog YU ; Chung Ju HWANG
The Korean Journal of Orthodontics 2018;48(5):283-291
OBJECTIVE: This study was conducted to perform histomorphometric evaluations of the bone surrounding orthodontic miniscrews according to their proximity to the adjacent tooth roots in the posterior mandible of beagle dogs. METHODS: Four male beagle dogs were used for this study. Six orthodontic miniscrews were placed in the interradicular spaces in the posterior mandible of each dog (n = 24). The implanted miniscrews were classified into no loading, immediate loading, and delayed loading groups according to the loading time. At 6 weeks after screw placement, the animals were sacrificed, and tissue blocks including the miniscrews were harvested for histological examinations. After analysis of the histological sections, the miniscrews were categorized into three additional groups according to the root proximity: high root proximity, low root proximity, and safe distance groups. Differences in the bone–implant contact (BIC, %) among the root proximity groups and loading time groups were determined using statistical analyses. RESULTS: No BIC was observed within the bundle bone invaded by the miniscrew threads. Narrowing of the periodontal ligament space was observed in cases where the miniscrew threads touched the bundle bone. BIC (%) was significantly lower in the high root proximity group than in the low root proximity and safe distance groups. However, BIC (%) showed no significant differences among the loading time groups. CONCLUSIONS: Regardless of the loading time, the stability of an orthodontic miniscrew is decreased if it is in contact with the bundle bone as well as the adjacent tooth root.
Animals
;
Dogs
;
Humans
;
Male
;
Mandible
;
Periodontal Ligament
;
Tooth Root
10.The effects of alveolar bone loss and miniscrew position on initial tooth displacement during intrusion of the maxillary anterior teeth: Finite element analysis.
Sun Mi CHO ; Sung Hwan CHOI ; Sang Jin SUNG ; Hyung Seog YU ; Chung Ju HWANG
The Korean Journal of Orthodontics 2016;46(5):310-322
OBJECTIVE: The aim of this study was to determine the optimal loading conditions for pure intrusion of the six maxillary anterior teeth with miniscrews according to alveolar bone loss. METHODS: A three-dimensional finite element model was created for a segment of the six anterior teeth, and the positions of the miniscrews and hooks were varied after setting the alveolar bone loss to 0, 2, or 4 mm. Under 100 g of intrusive force, initial displacement of the individual teeth in three directions and the degree of labial tilting were measured. RESULTS: The degree of labial tilting increased with reduced alveolar bone height under the same load. When a miniscrew was inserted between the two central incisors, the amounts of medial-lateral and anterior-posterior displacement of the central incisor were significantly greater than in the other conditions. When the miniscrews were inserted distally to the canines and an intrusion force was applied distal to the lateral incisors, the degree of labial tilting and the amounts of displacement of the six anterior teeth were the lowest, and the maximum von Mises stress was distributed evenly across all the teeth, regardless of the bone loss. CONCLUSIONS: Initial tooth displacement similar to pure intrusion of the six maxillary anterior teeth was induced when miniscrews were inserted distal to the maxillary canines and an intrusion force was applied distal to the lateral incisors. In this condition, the maximum von Mises stresses were relatively evenly distributed across all the teeth, regardless of the bone loss.
Alveolar Bone Loss*
;
Finite Element Analysis*
;
Incisor
;
Tooth*