The use of alginate impression materials today is prevalent because of its efficiency and simplicity in clinical settings. Unfortunately, the simplicity of the procedure tends to lull the dentist into a sense of well-being, and lead him into using careless or sloppy technique. Alginate impression materials are used to fabricate diagnostic and preliminary casts, and the final cast. Incorrect use of this material is known to affect the accuracy of the final prosthesis. The purpose of this study was to compare the effect of different mixing methods of alginate impression material and tray adhesive on the accuracy of the stone cast produced by each method. A total of 30 stone casts were produced by using 3 different types of mixing methods (10 stone cast for each mixing method, respectively) The first method utilized an automatic-mixing machine to mix alginate while the second method was carried out manually, strictly following manufacturer's instructions. The third method also involved manual mixing, but did not follow the manufacturer's instructions and was done in a random fashion. Also, 20 additional stone casts were produced by using alginate with or without tray adhesives were included in the study to evaluate effects of tray adhesives on the accuracy of alginate impression. 10 stone casts were produced by adding tray adhesives to the interior surface of the impression tray prior to taking the impression. The other 10 excluded this step. A total of 50 stone casts were analyzed by the three-dimensional measuring machine to measure and compare the dimensional changes of the impression material of each group. The results are as follows. 1. No significant difference was found between the automatic mixing group and the manually-mixing group(p>0.05). 2. For the group that followed manufacturer's instructions, less dimensional changes were recorded than the group that didn't in measuring distance d4(p<0.05) 3. The group that used tray adhesives showed less dimensional changes(p<0.05). The findings revealed that mechanical methods of mixing alginate impression materials had little influence on dimensional changes. However, it is proven that following manufacturers instructions in alginate impression taking is an important step in acquiring accurate impressions and tray adhesives may play an important role in enhancing the results.
Adhesives* ; Dentists ; Humans ; Prostheses and Implants

We present a case of multiple trichoepithelioma associated with milia. A 12-year-old girl developed symmetrically distributed, numerous, skin-colored papules on her face, some of which were studded with milia-like whitish materials. Histopathological findings of these lesions revealed the typical findings of trichoepitheliomas with overlying milia in the upper dermis.
Child ; Dermis ; Female ; Humans

Irritant or allergic contact dermatitis presents usually eczematous process or occasionally noneczematous lesions like in this case. We report a case of erythema rnultiforme-like eruptions in a 40-year-old female who presented multiple iris or annular shaped maculopapular eruptions on both hands and forearms after contact of lacquer tree. Being performed with standard patch test screening series, lacquer tree extracts and urushiol, she showed significant reactions to the lacquer tree and urushiol. Histopathologic findings showed both features of erythema multiforme and suh acute contact dermatitis.
Adult ; Dermatitis, Allergic Contact ; Dermatitis, Contact ; Erythema Multiforme* ; Erythema* ; Female ; Forearm ; Hand ; Humans ; Iris ; Lacquer* ; Mass Screening ; Patch Tests ; Trees*

We report herein a case of bowenoid papulosis, which developed on the groin, the shaft of the penis and left parietal area, of scalp in a 31-year-old male. Clinical features present as brown to brown-black papules and verrucous plaques ranging from 2 cm to 12 cm in diameter. Electron microscopic examination of the specimen obtained from our patient fail to reveal viral particles.
Adult ; Genitalia* ; Groin ; Humans ; Male ; Penis ; Rabeprazole ; Scalp ; Virion

Disseminated superficial actinic porokeratosis (DSAP) has an autosomal dominant mode of inheritance with reduced penetration at young age, characterized by multiple superficial keratotic lesions surrounded by a slightly raised border. The aggrevation of the lesion by exposing UV light indicates that phenotypic expression of gene regluating DSAP is related to sun light. We observed a family of which 13 members had DSAP in 3 successive generations. They were grandrnother, two sons of her 3 offsprings, 2 grandsons and 8 granddaughters. Lesions of all cases were found on the sun exposed areas, especially, face, extremities and upper trunk but exceptionally one had a lesion on the unex posed area, abdomen below the iliac crest. The number of lesions of the individual patient were 12-116, and there appeared to be increasing number of lesions with age.
Abdomen ; Extremities ; Family Characteristics* ; Humans ; Porokeratosis* ; Solar System ; Ultraviolet Rays ; Wills

No abstract available.
Bacteroides fragilis* ; Bacteroides*

Duodenal gastrointestinal stromal tumors (GISTs) are uncommon and a relatively small subset of GISTs whose optimal surgical procedure has not been well defined. Because submucosal spread and local lymph node involvement is infrequent in GISTs, wide margins with routine lymph node dissection may not be required. Various techniques of limited resection for duodenal GISTs have been described depending on the site and the size of the tumors. In this study, we report two cases of GIST involving the third and fourth portion of the duodenum successfully treated by segmental duodenectomy with end-to-end duodenojejunostomy. This technique should be considered as a treatment option for GIST located at the third and fourth portion of the duodenum.
Duodenum ; Gastrointestinal Stromal Tumors ; Lymph Node Excision ; Lymph Nodes

STUDY DESIGN: The authors is to report the clinical and radiological results of proximal half corpectomy with one motion segment fusion in Denis type B burst fracture. OBJECTIVES: To evaluate the efficacy of proximal half corpectomy in Denis type B burst fracture of thethoracolumbar and lumbar spine. SUMMARY OF LITERATURE REVIEW: For the operative management of burst fracture, various mothods including posterior ligamentotaxis, posterolateral decompression, anterior decompression or combined were reported. Among the methods, anterior decompression by the corpectomy of fractured vertebral body and fusion with or without instrumentation is the one of the widely accepted method of treatment. However, anterior decompression by excision of whole vertebral body has the disadvantage of high complication rate due to the instability from the large defect and long length of bone graft. Moreover, two motion segments have to be sacrified, which is very important especially in thoracolumbar and lumbar area. Material and METHODS: 43 cases operated from 1989 to 1996 and the minimum follow up period was two years and compared with that of 48 cases who were treated by total corpectomy and two motion segment fashion from 1986 to 1989. RESULTS: Solid bony union was obtained in 43 cases within 6 months and no back pain was complained in 39 cases (93%) at last follow up. There was no significant difference between two groups in correction of anterior vertebral height and kyphotic angle. Length of bone graft was 3.0cm in half corpectomy group and was 6.3cm in total corpectomy group. Hardward breakage or graft collapse was not observed in proximal half corpectomy, while there were 5 cases in total corpectomy. CONCLUSION: Proximal half corpectomy and fusion of one motion segment in Denis type B burst fracture is believed to be a successful method which can minimize the fused level, increase the stability, preserve motion segment and reduce the complication.
Back Pain ; Decompression ; Follow-Up Studies ; Spine* ; Transplants

STUDY DESIGN: Sixteen patients with congenital kyphoscoliosis were evaluated the clinical and radiological results according to the treatment method. OBJECTIVES: To provide a guideline for surgical treatment of congenital kyphoscoliosis SUMMARY OF LITERATURE REVIEW: Congenital kyphoscoliosis is an abnormal coronal and sagittal curvature of spine that is caused by the presence of vertebral anomalies, which causes a significant deformity and disability. Correction of the deformity is challenging and accompanied by high risk of complications. Many methods of operative treatment were recommended with various results. MATERIALS & METHODS: We reviewed 16 patients of congenital kyphoscoliosis who were operated from 1984 to 1997, and follow-up periods were over 12 months in all. The average age of surgery was 12 years (ranged from 4 to 20 years). Nine cases were operated by excision of quadrant hemivertebra through combined anterior & posterior approach and 6 cases were treated only by posterior instrumentation and one underwent posterior on bloc spondylectomy. RESULTS: The type of curves were thoracic in 5, thoracolumbar in 9, lumbar area in 2 patients. Average angle of kyphosis was 55 degree preoperatively, 25 degree postoperatively, and 39 degree at the follow up study. Average angle of scoliosis was 48 degree, 22 degree, and 27 degree, respectively. In 9 cases corrected by excision of quadrant hemivertebra; kyphotic angle was changed from 62degrees preoperatively, to 22degrees postoperatively and to 36 degree at the end of follow up study, while scoliotic angle was changed from 47degrees, to 12degrees and to 21degrees, respectively. In 6 cases corrected by posterior instrumentation kyphotic angle was changed from 52degrees preoperatively, to 33degrees postoperatively and to 48degrees degree at the follow up study, while scoliotic angle was changed from 53degrees, to 33degrees and to 37degrees, respectively. CONCLUSION: Excision of quadrant hemivertebra through combined anterior and posterior approach or posterior instrumentation were resulted in significant loss of correction during the remaining growth period due to the secondary change of adjacent vertebrae. So, to obtain better correction and to reduce the recurrence of deformity, more aggressive approach including the concept of three dimentional osteotomy involving the upper and lower adjacent curve may be considered.
Congenital Abnormalities ; Follow-Up Studies ; Humans ; Kyphosis ; Osteotomy ; Recurrence ; Scoliosis ; Spine

The present study was to assess the effect of ultrarapid freezing on the development of 1-cell mouse zygote using cryoprotectants, DMSO (dimethyl sulfoxide) or PROH (1,2-propanediol). We investigated the effect of the type and concentration of cryoprotectant, and of the temperature and time of prefreezing equilibration on their capacity to develop to the blastocyst stage in vitro. The concenration, the equilibration temperature, and the exposure time seemed to serve as an important factor in ultrarapid freezing of 1-cell mouse zygotes. In addition to the exposure time and the concentration of cryoprotectant appeared to play a key role in the development of the embryo. In general, the development of the embryo was more effective at 3degrees C than 23degrees C and 4.5 M than 3 M for 3 to 5 minutes. At 23degrees C the development of the embryo was stimulated by DMSO while at 3degrees C it was stimulated by PROH. Thus it has been suggested that there exists a correlation between the concentration of cryoprotectants and exposure time in the development of the embryo. In conclusion, we found that for ultrarapid freezing of mouse 1-cell embryos in DMSO, or PROH-based solution, viability shown optimum depending on the cryoprotectant, the concentration of the cryoprotectant and on the temperature and the duration of equilibration.
Animals ; Blastocyst ; Dimethyl Sulfoxide ; Embryonic Structures ; Freezing* ; Mice* ; Zygote*