1.Influence of Tightening Torque on Implant-Abutment Screw Joint Stability.
Hyon Mo SHIN ; Chang Mo JEONG ; Yonung Chan JEON ; Mi Jeong YUN ; Ji Hoon YOON
The Journal of Korean Academy of Prosthodontics 2008;46(4):396-408
STATEMENT OF PROBLEM: Within the elastic limit of the screw, the greater the preload, the tighter and more secure the screw joint. However, additional tensile forces can incur plastic deformation of the abutment screw when functional loads are superimposed on preload stresses, and they can elicit the loosening or fracture of the abutment screw. Therefore, it is necessary to find the optimum preload that will maximize fatigue life and simultaneously offer a reasonable degree of protection against loosening. Another critical factor in addition to the applied torque which can affect the amount of preload is the joint connection type between implant and abutment. PURPOSE: The purpose of this study was to evaluate the influence of tightening torque on the implant-abutment screw joint stability. MATERIAL AND METHODS: Respectively, three different amount of tightening torque (20, 30, and 40 Ncm) were applied to implant systems with three different joint connections, one external butt joint and two internal cones. The initial removal torque value and the postload (cyclic loading up to 100,000 cycles) removal torque value of the abutment screw were measured with digital torque gauge. Then rate of the initial and the postload removal torque loss were calculated for the comparison of the effect of tightening torques and joint connection types between implant and abutment on the joint stability. Results and CONCLUSION: 1. Increase in tightening torque value resulted in significant increase in initial and postload removal torque value in all implant systems (P < .05). 2. Initial removal torque loss rates in SS II system were not significantly different when three different tightening torque values were applied (P > .05), however GS II and US II systems exhibited significantly lower loss rates with 40 Ncm torque value than with 20 Ncm (P < .05). 3. In all implant systems, postload removal torque loss rates were lowest when the torque value of 30 Ncm was applied (P < .05). 4. Postload removal torque loss rates tended to increase in order of SS II, GS II and US II system. 5. There was no correlation between initial removal torque value and postload removal torque loss rate (P > .05).
Fatigue
;
Joints
;
Plastics
;
Torque
2.Influence of the implant-abutment connection design and diameter on the screw joint stability.
Hyon Mo SHIN ; Jung Bo HUH ; Mi Jeong YUN ; Young Chan JEON ; Brian Myung CHANG ; Chang Mo JEONG
The Journal of Advanced Prosthodontics 2014;6(2):126-132
PURPOSE: This study was conducted to evaluate the influence of the implant-abutment connection design and diameter on the screw joint stability. MATERIALS AND METHODS: Regular and wide-diameter implant systems with three different joint connection designs: an external butt joint, a one-stage internal cone, and a two-stage internal cone were divided into seven groups (n=5, in each group). The initial removal torque values of the abutment screw were measured with a digital torque gauge. The postload removal torque values were measured after 100,000 cycles of a 150 N and a 10 Hz cyclic load had been applied. Subsequently, the rates of the initial and postload removal torque losses were calculated to evaluate the effect of the joint connection design and diameter on the screw joint stability. Each group was compared using Kruskal-Wallis test and Mann-Whitney U test as post-hoc test (alpha=0.05). RESULTS: The postload removal torque value was high in the following order with regard to magnitude: two-stage internal cone, one-stage internal cone, and external butt joint systems. In the regular-diameter group, the external butt joint and one-stage internal cone systems showed lower postload removal torque loss rates than the two-stage internal cone system. In the wide-diameter group, the external butt joint system showed a lower loss rate than the one-stage internal cone and two-stage internal cone systems. In the two-stage internal cone system, the wide-diameter group showed a significantly lower loss rate than the regular-diameter group (P<.05). CONCLUSION: The results of this study showed that the external butt joint was more advantageous than the internal cone in terms of the postload removal torque loss. For the difference in the implant diameter, a wide diameter was more advantageous in terms of the torque loss rate.
Joints*
;
Torque
3.Role of Flexible Fiberoptic Bronchoscopy in the Diagnosis of Childhood Endobronchial Tuberculosis.
Eun Hee CHUNG ; Mi Hyon TAE ; Seung Yeon NAM ; Chang Kyu KANG ; Mee Yong SHIN ; Kang Mo AHN ; Jhin Gook KIM ; Joung Ho HAN ; Sang Il LEE
Pediatric Allergy and Respiratory Disease 2001;11(3):265-273
Endobrochial tuberculosis which may result in stenosis of the bronchus, is a rare complication of pulmonary tuberculosis in children. We recently treated three children with endobronchial tuberculosis which presented different clinical manifestations and different response to the treatments. Endoscopic examinations revealed bronchial masses, in which biopsy and polymerase chain reaction(PCR) were consistent with endobronchial tuberculosis. We reviewed the presentation and treatment of endobronchial tuberculosis in 3 children.
Biopsy
;
Bronchi
;
Bronchoscopy*
;
Child
;
Constriction, Pathologic
;
Diagnosis*
;
Humans
;
Tuberculosis*
;
Tuberculosis, Pulmonary
4.The Impact of Vascular Access for In-Hospital Major Bleeding in Patients with Acute Coronary Syndrome at Moderate- to Very High-Bleeding Risk.
Keun Ho PARK ; Myung Ho JEONG ; Youngkeun AHN ; Sang Sik JUNG ; Moo Hyun KIM ; Hyoung Mo YANG ; Junghan YOON ; Seung Woon RHA ; Keum Soo PARK ; Kyoo Rok HAN ; Byung Ryul CHO ; Kwang Soo CHA ; Byung Ok KIM ; Min Soo HYON ; Won Yong SHIN ; Hyunmin CHOE ; Jang Whan BAE ; Hee Yeol KIM
Journal of Korean Medical Science 2013;28(9):1307-1315
The aim of our study was to determine the impact of vascular access on in-hospital major bleeding (IHMB) in acute coronary syndrome (ACS). We analyzed 995 patients with non-ST elevation myocardial infarction and unstable angina at the Can Rapid risk stratification of Unstable angina patients Suppress ADverse outcomes with Early implementation of the ACC/AHA guidelines (CRUSADE) moderate- to very high-bleeding risk scores in trans-radial intervention (TRI) retrospective registry from 16 centers in Korea. A total of 402 patients received TRI and 593 patients did trans-femoral intervention (TFI). The primary end-point was IHMB as defined in the CRUSADE. There were no significant differences in in-hospital and 1-yr mortality rates between two groups. However, TRI had lower incidences of IHMB and blood transfusion than TFI (6.0% vs 9.4%, P = 0.048; 4.5% vs 9.4%, P = 0.003). The patients suffered from IHMB had higher incidences of in-hospital and 1-yr mortality than those free from IHMB (3.1% vs 15.0%, P < 0.001; 7.2% vs 30.0%, P < 0.001). TRI was an independent negative predictor of IHMB (odds ratio, 0.305; 95% confidence interval, 0.109-0.851; P = 0.003). In conclusions, IHMB is still significantly correlated with in-hospital and 1-yr mortality. Our study suggests that compared to TFI, TRI could reduce IHMB in patients with ACS at moderate- to very high-bleeding risk.
Acute Coronary Syndrome/mortality/*pathology
;
Aged
;
Female
;
Femoral Artery
;
*Hemorrhage
;
Hospital Mortality
;
Humans
;
Kaplan-Meier Estimate
;
Male
;
Middle Aged
;
Odds Ratio
;
Percutaneous Coronary Intervention
;
Radial Artery
;
Retrospective Studies
;
Risk Factors
;
Stents
;
Treatment Outcome