Calcaneal fractures involving subtalar joint can be associated with prolonged and severe disability. Many different methods have been tried for the treatment in order to search for better results. From March 1983 to December 1985, 8 cases of calcaneal fractures involving subtalar joint were treated by open rcduction and internal fixation. and the results were as follows: 1. Satisfactory results were obtained from 7 cases out of 8. 2. Anatomic reduction was obtained by open reduction and internal fixation. 3. When medial approach failed, combined lateral and medial approaches gave better visualization of articular fecets and ensured anatomic reduction.
Subtalar Joint

The coronavirus disease 2019 (COVID-19) vaccines are categorized according to the manufacturing technique, including mRNA vaccines and adenovirus vector vaccines. According to previous studies, the reported efficacy of the COVID-19 vaccine is excellent regardless of the type of vaccine, and the majority of studies have shown similar results for safety. Most of the adverse reactions after vaccination were mild or moderate grade, and severe reactions were reported in a very small proportion. However, the adverse reactions that might occur after nationwide vaccinations can contribute to crowding of emergency departments, and this can further lead to significant obstacles to providing necessary treatment for life-threatening conditions. Therefore, as emergency physicians, we would like to present some concerns and suggestions to prevent these predictable problems.

The coronavirus disease 2019 (COVID-19) vaccines are categorized according to the manufacturing technique, including mRNA vaccines and adenovirus vector vaccines. According to previous studies, the reported efficacy of the COVID-19 vaccine is excellent regardless of the type of vaccine, and the majority of studies have shown similar results for safety. Most of the adverse reactions after vaccination were mild or moderate grade, and severe reactions were reported in a very small proportion. However, the adverse reactions that might occur after nationwide vaccinations can contribute to crowding of emergency departments, and this can further lead to significant obstacles to providing necessary treatment for life-threatening conditions. Therefore, as emergency physicians, we would like to present some concerns and suggestions to prevent these predictable problems.

PURPOSE: We performed clinical and radiological evaluation of surgical outcomes of congenital vertical talus. MATERIALS AND METHODS: Fifteen surgically treated feet in 9 patients (6 bilateral and 3 unilateral) which were followed-up for at least 2 years were included. Mean patient age at the time of surgery was 10.9 months. The surgical technique was a one-stage correction using the Kumar technique with a Cincinnati skin incision. In 7 feet we also transferred half of the tibialis anterior to the talar neck (the Grice technique). Radiologic parameters (talo-calcaneal angle, talo-first metatarsal angle, tibio-talar angle, tibio-calcaneal angle) were analyzed pre- and postoperatively and at the last follow-up, and clinical outcomes by the Laaveg-Ponseti score. RESULTS: Talus orientation was improved in all patients. All radiologic parameters showed statistically significant improvement by the last follow-up. The mean Laaveg-Ponseti score at the last follow-up was 16 for patient satisfaction, 16 for function, and 24 for pain. There was no recurrence, however one case of talar neck fracture occurred during the tibialis anterior transfer. CONCLUSION: One-stage surgical correction for congenital vertical talus at an early age provides satisfactory functional and cosmetic results.
Follow-Up Studies ; Foot ; Humans ; Metatarsal Bones ; Neck ; Patient Satisfaction ; Recurrence ; Skin ; Talus*

Background: In recent years, the number of people riding stand-up electric scooters in South Korea has increased rapidly. This study analyzed the facial injury patterns associated with stand-up electric scooter-related trauma in patients who visited our emergency center. Methods: In this retrospective review, we collected data from patients who had visited our emergency center for stand-up electric scooter-related trauma between January 1, 2018 and December 31, 2020. Results: The average age of the patients was 26.7 years. Of the 73 patients, 47 were male and 26 were female, highlighting a male predominance. Seven patients were injured after alcohol consumption. None of the patients had worn helmets. Additionally, upon comparing the frequency of facial injuries according to the quarter of the year, the facial injury rate was higher in the second and third quarters than in the first and fourth quarters. Facial soft tissue injuries were classified into facial cosmetic subunits and analyzed according to their location. The highest number of injuries was on the chin (n=18, 20.9%). Of the 73 patients with stand-up electric scooter-related facial injuries, 16 had acute facial osseous fractures. The commonest acute facial osseous fractures were those of the orbit (n=7, 26.9%). Conclusions The patterns of facial trauma reported here can be helpful for quickly evaluating and treating patients with facial trauma related to stand-up electric scooters. Additionally, people riding stand-up electric scooters should be aware of the risks associated with facial trauma and the importance of wearing protective devices, such as helmets and masks.

PURPOSE: To report contact lens related Acanthamoeba keratitis with corneal epithelial defect cases which were diagnosed using polymerase chain reaction (PCR).CASE SUMMARY: A 51-year-old male visited our hospital for loss of visual acuity and ocular pain in both eyes. He had been wearing therapeutic contact lenses in both eyes for 4 days prior to his visit, and showed a corneal epithelial defect with corneal edema in both eyes. The corneal edema did not improve after treatment for bacterial and herpes keratitis, so we conducted PCR for Acanthamoeba using the aqueous fluid in the anterior chamber, which showed positive results. A 32-year-old male complained of low visual acuity and ocular pain in both eyes. He had a history of corneal erosion. He had been wearing therapeutic contact lenses in both eyes for 3 days prior to his visit for a corneal epithelial defect. We suspected recurrent corneal erosion syndrome, but PCR for Acanthamoeba of the corneal scraping showed positive results. A 26-year-old female visited our hospital for ocular pain, and discomfort in her left eye. Because of severe dry eye, she had been wearing therapeutic contact lenses for 6 weeks prior to her visit. Her left eye showed corneal infiltration and epithelial defects. The left cornea scraping was positive for bacteria, and PCR for Acanthamoeba also showed positive results. CONCLUSIONS Clinicians should consider the use of PCR for the early diagnosis of Acanthamoeba keratitis in contact lens-related keratitis with corneal epithelial defects.

This study was performed to evaluate the effects of microstructural change of zirconia surface on tensile bond strength with resin cement. The zirconia partially sintered block was cut into a size of 18 × 18 × 7 mm, and then the Zirface slurry (DMAX, Daegu, Korea) containing 15% and 30% zirconia was applied and followed by sintering at 1530 ℃ for 2 hours. Resin cement (PermaCem 2.0, DMG, Hamburg, Germany) was applied on zirconia specimen and polymerized to prepare an 18 × 18 × 14 mm block. In addition, for comparison of bond strength, specimens were prepared for the group that was polished and the group that was blasted at 3 atm using 110 µm alumina. Thereafter, all blocks were cut into a cross-sectional area of 1.0 × 1.0 mm to prepare 12 specimens. The specimens were immersed in distilled water at 37 ℃. for 10 days for aging treatment. A holder for tensile testing was attached to each of the specimens, and then a tensile force was applied at a crosshead speed of 0.5 mm/min to measure the fracture load. The fracture surfaces of each test piece was observed with a high-resolution field emission scanning electron microscope. Through the above tests, the following results were obtained. 1. On the blasted surface, zirconia grains were locally removed but on the Zirface treated surface, a porous microstructure was created on the zirconia surface. 2. Arithmetical mean deviation from the mean line ra was the highest in the blasted group and the lowest in the polished group, and as a result of Tukey analysis, there were statistically significant differences between all test groups (P<0.05). 3. The maximum tensile bond strength was 18.8±5.4 MPa in the Zirface 30% group, and as a result of Tukey analysis, there was a statistically significant difference from the other test groups (P<0.05). 4. As a result of observing the fracture surface after the tensile test with a high-resolution field emission scanning electron microscope, in the Zirface 30% group, cohesive fracture and interfacial fracture in the resin was observed, but the other test groups showed the interfacial fracture pattern. In conclusion, within the limits of this study, treating the zirconia surface with Zirface 30% to form a porous microstructure can contribute to the improvement of the bond strength between zirconia and resin cement.

BACKGROUND/AIMS: The optimal strategy for anticoagulation treatment in patients with atrial fibrillation (AF) and end-stage renal disease (ESRD) has not been established. We evaluated the efficacy and bleeding risk of warfarin and antiplatelet agents in patients with AF and ESRD. METHODS: We retrospectively reviewed the medical records of 256 patients with AF and ESRD and included 158 patients (age, 63.7 ± 12.2 years; male sex, n = 103) with a CHA2DS2-VASc score ≥ 1 who were taking warfarin (n = 53) or an antiplatelet agent (n = 105). RESULTS: During the follow-up period (31.0 ± 29.4 months), 10 ischemic events and 29 major bleeding events occurred. The thromboembolic event rate did not significantly differ between the warfarin and antiplatelet groups (1.9% and 8.6%, respectively; p = 0.166). However, the rate of major bleeding events was significantly higher in the warfarin group than it was in the antiplatelet group (32.1% and 11.4%, respectively; p = 0.002). Cox's regression analysis indicated that warfarin was related to an increased risk of major bleeding events (hazard ratio [HR], 3.44; 95% confidence interval [CI], 1.60–7.36; p = 0.001). Conversely, warfarin was not related to a decreased risk of thromboembolic events (HR, 0.34; 95% CI, 0.04–2.70; p = 0.306). CONCLUSIONS: In patients with AF and ESRD, warfarin use was associated with an increased risk of bleeding events, compared with antiplatelet agents.
Anticoagulants ; Atrial Fibrillation ; Follow-Up Studies ; Hemorrhage ; Humans ; Kidney Failure, Chronic ; Male ; Medical Records ; Platelet Aggregation Inhibitors ; Retrospective Studies ; Warfarin

This study was performed to evaluate the effects of microstructural change of zirconia surface on tensile bond strength with resin cement. The zirconia partially sintered block was cut into a size of 18 × 18 × 7 mm, and then the Zirface slurry (DMAX, Daegu, Korea) containing 15% and 30% zirconia was applied and followed by sintering at 1530 ℃ for 2 hours. Resin cement (PermaCem 2.0, DMG, Hamburg, Germany) was applied on zirconia specimen and polymerized to prepare an 18 × 18 × 14 mm block. In addition, for comparison of bond strength, specimens were prepared for the group that was polished and the group that was blasted at 3 atm using 110 µm alumina. Thereafter, all blocks were cut into a cross-sectional area of 1.0 × 1.0 mm to prepare 12 specimens. The specimens were immersed in distilled water at 37 ℃. for 10 days for aging treatment. A holder for tensile testing was attached to each of the specimens, and then a tensile force was applied at a crosshead speed of 0.5 mm/min to measure the fracture load. The fracture surfaces of each test piece was observed with a high-resolution field emission scanning electron microscope. Through the above tests, the following results were obtained. 1. On the blasted surface, zirconia grains were locally removed but on the Zirface treated surface, a porous microstructure was created on the zirconia surface. 2. Arithmetical mean deviation from the mean line ra was the highest in the blasted group and the lowest in the polished group, and as a result of Tukey analysis, there were statistically significant differences between all test groups (P<0.05). 3. The maximum tensile bond strength was 18.8±5.4 MPa in the Zirface 30% group, and as a result of Tukey analysis, there was a statistically significant difference from the other test groups (P<0.05). 4. As a result of observing the fracture surface after the tensile test with a high-resolution field emission scanning electron microscope, in the Zirface 30% group, cohesive fracture and interfacial fracture in the resin was observed, but the other test groups showed the interfacial fracture pattern. In conclusion, within the limits of this study, treating the zirconia surface with Zirface 30% to form a porous microstructure can contribute to the improvement of the bond strength between zirconia and resin cement.

Background: Cardiac resynchronization therapy (CRT) is an effective treatment option for patients with heart failure (HF) and left ventricular (LV) dyssynchrony. However, the problem of some patients not responding to CRT remains unresolved. This study aimed to propose a novel in silico method for CRT simulation. Methods: Three-dimensional heart geometry was constructed from computed tomography images. The finite ele‑ ment method was used to elucidate the electric wave propagation in the heart. The electric excitation and mechani‑ cal contraction were coupled with vascular hemodynamics by the lumped parameter model. The model parameters for three-dimensional (3D) heart and vascular mechanics were estimated by matching computed variables with measured physiological parameters. CRT effects were simulated in a patient with HF and left bundle branch block (LBBB). LV end-diastolic (LVEDV) and end-systolic volumes (LVESV), LV ejection fraction (LVEF), and CRT responsiveness measured from the in silico simulation model were compared with those from clinical observation. A CRT responder was defined as absolute increase in LVEF ≥ 5% or relative increase in LVEF ≥ 15%. Results: A 68-year-old female with nonischemic HF and LBBB was retrospectively included. The in silico CRT simu‑ lation modeling revealed that changes in LVEDV, LVESV, and LVEF by CRT were from 174 to 173 mL, 116 to 104 mL, and 33 to 40%, respectively. Absolute and relative ΔLVEF were 7% and 18%, respectively, signifying a CRT responder.In clinical observation, echocardiography showed that changes in LVEDV, LVESV, and LVEF by CRT were from 162 to 119 mL, 114 to 69 mL, and 29 to 42%, respectively. Absolute and relative ΔLVESV were 13% and 31%, respectively, also signifying a CRT responder. CRT responsiveness from the in silico CRT simulation model was concordant with that in the clinical observation. Conclusion This in silico CRT simulation method is a feasible technique to screen for CRT non-responders in patients with HF and LBBB.