Objective To elucidate the molecular mechanism of sirtuin-3 (SIRT3) in regulating mitochondrial biogenesis in human renal tubular epithelial cells. Methods Cells were stimulated with different concentrations of H₂O₂ and divided into four groups: control (NC), 50 μmol/L H₂O₂, 110 μmol/L H₂O₂ and 150 μmol/L H₂O₂. SIRT3 protein expression was then measured. SIRT3 was knocked down with siRNA, and cells were further assigned to five groups: control (NC), negative-control siRNA (NCsi), SIRT3-siRNA (siSIRT3), NCsi+H₂O₂, and siSIRT3+H₂O₂. After 24 h, cellular adenosine triphosphate (ATP) and mitochondrial superoxide anion (O₂•⁻) levels were determined, together with mitochondrial expression of SIRT3, peroxisome proliferator-activated receptor γ coactivator-1α (PGC-1α), nuclear respiratory factor 1 (NRF1), mitochondrial transcription factor A (TFAM), superoxide dismutase 2 (SOD2), acetylated-SOD2 and adenosine monophosphate activated protein kinase α1 (AMPKα1). Results The 110 and 150 μmol/L H₂O₂ decreased SIRT3 protein (both P<0.05). ATP and mitochondrial O₂•⁻ did not differ between NC and NCsi groups (both P>0.05). Compared to the NCsi group, the siSIRT3 group exhibited elevated O₂•⁻ level, decreased SIRT3 protein and increased expression levels of SOD2 and acetylated SOD2 protein (all P<0.05). Compared to the NCsi group, the NCsi+H₂O₂ group exhibited decreased cellular ATP levels, elevated mitochondrial O₂•⁻ levels, and reduced protein expression levels of SIRT3, SOD2, TFAM, AMPKα1, PGC-1α and NRF1 (all P<0.05). Compared with the siSIRT3 group, the siSIRT3+H₂O₂ group showed a decrease in cellular ATP levels, an increase in mitochondrial O₂•⁻ levels, a decrease in SIRT3, SOD2, TFAM, AMPKα1, PGC-1α and NRF1 protein expression levels and a decrease in acetylated SOD2 protein expression levels (all P<0.05). Compared with the NCsi+H₂O₂ group, the siSIRT3+H₂O₂ group showed a decrease in cellular ATP levels, an increase in mitochondrial O₂•⁻ levels, a decrease in SIRT3, AMPKα1, PGC-1α and NRF1, TFAM protein expression levels, and an increase in SOD2 and acetylated SOD2 protein expression levels (all P<0.05). Conclusions SIRT3 promotes mitochondrial biogenesis in tubular epithelial cells via the AMPK/PGC-1α/NRF1/TFAM axis, representing a key mechanism through which SIRT3 ameliorates oxidative stress-induced mitochondrial dysfunction.

OBJECTIVE To investigate the apoptosis-inducing effect of esculetin （Esc） on acute myeloid leukemia （AML） HL-60 cells by regulating the protein kinase B （AKT）/S-phase kinase-associated protein 2 （SKP2）/MutT homolog 1 （MTH1） pathway. METHODS AML HL-60 cells were randomly divided into control group （routine culture）， Esc low-concentration group （L-Esc group， 25 μmol/L Esc）， Esc medium-concentration group （M-Esc group， 50 μmol/L Esc）， Esc high-concentration group （H-Esc group， 100 μmol/L Esc）， and high-concentration of Esc+ SC79 （AKT agonist） group （100 μmol/L Esc+5 μmol/L SC79）. Cell proliferation in each group was detected by MTT assay and colony formation assay. The level of reactive oxygen species （ROS） in cells was measured by using the CM-H2DCFDA fluorescent probe. Cell apoptosis was analyzed by flow cytometry. Western blot assay was performed to detect the expression levels of apoptosis-related proteins [B-cell lymphoma 2 （Bcl-2）， Bcl-2-associated X protein （Bax）， cleaved caspase-3]， AKT/SKP2/MTH1 pathway-related proteins （p-AKT， AKT， SKP2， MTH1）， along with the upstream and downstream proteins of AKT phosphatidylinositol 3-kinase （PI3K）， cyclin-dependent kinase inhibitor 1 （P21） and cyclin-dependent kinase inhibitor 1B （P27）. RESULTS Compared with control group， the cell viability， colony number， and the phosphorylation levels of AKT and PI3K proteins as well as protein expressions of SKP2， MTH1 and Bcl-2 were significantly decreased （P＜0.05）， while ROS level， apoptosis rate， and the expression levels of Bax， cleaved caspase-3， P21 and P27 proteins were significantly increased （P＜0.05）. Moreover， the effects of Esc exhibited concentration-dependence （P＜0.05）. Compared with H-Esc group， above indexes of high-concentration of Esc+ SC79 group were reversed significantly （P＜0.05）. CONCLUSIONS Esc may promote massive ROS production and induce activation of apoptosis in HL-60 cells by inhibiting the AKT/SKP2/MTH1 pathway， thus inhibiting the proliferation of HL-60 cells.

ObjectiveAt present, the most commonly used photosensitizers in photodynamic therapy are still chemical photosensitizers, such as porphyrin and methylene blue, in order to specifically target cellular tissues, and thus poison cells, chemical photosensitizers need to use antibody conjugation or a transgenically encoded tag with affinity for the modified photosensitizing ligand, e.g. FlAsH, ReAsh or Halo Tag. Gene-encoded photosensitizers can directly poison cells by targeting specific cell compartments or organelles. However, currently developed gene-encoded photosensitizers have low reactive oxygen species production and low cytotoxicity, so it is necessary to continue to develop and obtain photosensitizers with higher reactive oxygen species production for the treatment of microbial infections and tumors. MethodsIn this study, we developed a photosensitizer LovPSO2 based on the light-oxygen-voltage (LOV) structural domain of phototropin-1B-like from Oryza sativa japonica. LovPSO2 was expressed in E. coli BL21(DE3) and purified to obtain protein samples, the purified protein samples were added 3 µmol/L singlet oxygen probe of SOSG and 5 µmol/L superoxide anion probe of DHE after fixed to A₄₄₅=0.063±0.003, respectively, then measured every 2 min of singlet oxygen production for 10 min and every 1 min of superoxide anion production for 5 min under blue light irradiation at 445 nm, 70 µmol·m^-2·s^-1. ResultsThe results showed that LovPSO2 could produce a large amount of singlet oxygen under blue light irradiation at 445 nm, 70 µmol·m^-2·s^-1, and its singlet oxygen quantum yield was 0.61, but its superoxide anion yield was low, so in order to improve the superoxide anion yield of LovPSO2, a mutant with a relatively high superoxide anion yield was obtained by further development and design on its basis LovPRO2. The stability of proteins is crucial for research in drug development and drug delivery, among others. Temperature and light are the key factors affecting the production of reactive oxygen species (ROS) by photosensitive proteins and their stability, while the temperature in cell culture and mammals in vivo is about 37°C, and the temperature inside tumor cells is about 42-45°C. Therefore, we further analyzed the photostability of miniSOG, SOPP3, LovPSO2, and LovPRO2 and their thermostability at 37℃ and 45℃. The analysis of proteins thermostability showed that LovPSO2 and LovPRO2 had better thermostability at 37℃ and 45℃, respectively. Analysis of the photostability of the proteins showed that LovPRO2 had better photostability. In addition, to further determine the phototoxic effects of photosensitizers, LovPSO2 and LovPRO2 were expressed in E. coli BL21(DE3) and HeLa cells, respectively. The results showed that LovPSO2 and LovPRO2 had better phototoxicity to E. coli BL21(DE3) under blue light irradiation, and the cellular phototoxicity lethality was as high as 90% after 30 min of continuous light irradiation, but the phototoxicity was weaker in HeLa cells. The reason for this result may be that the intracellular environment exacerbated the photobleaching of FMN encapsulated by LovPSO2 and LovPRO2, respectively, which attenuated the damage of reactive oxygen species to animal cellular tissues, limiting its use as a mechanistic tool to study oxidative stress. ConclusionLovPSO2 and LovPRO2 can be used as antibacterial photosensitizers, which have broader application prospects in the food and medical fields.

During orthodontic treatment, clinical monitoring of patients is a crucial factor in determining treatment success. It aids in timely problem detection and resolution, ensuring adherence to the intended treatment plan. In recent years, digital technology has increasingly permeated orthodontic clinical diagnosis and treatment, facilitating clinical decision-making, treatment planning, and follow-up monitoring. This review summarizes recent advancements in digital technology for monitoring orthodontic tooth movement, related complications, and appliance-wearing compliance. It aims to provide insights for researchers and clinicians to enhance the application of digital technology in orthodontics, improve treatment outcomes, and optimize patient experience. The digitization of diagnostic data and the visualization of dental models make chair-side follow-up monitoring more convenient, accurate, and efficient. At the same time, the emergence of remote monitoring technology allows orthodontists to promptly identify oral health issues in patients and take corresponding measures. Furthermore, the multimodal data fusion method offers valuable insights into the monitoring of the root-alveolar relationship. Artificial intelligence technology has made initial strides in automating the identification of orthodontic tooth movement, associated complications, and patient compliance evaluation. Sensors are effective tools for monitoring patient adherence and providing data-driven support for clinical decision-making. The application of digital technology in orthodontic monitoring holds great promise. However, challenges like technical bottlenecks, ethical considerations, and patient acceptance remain.

ObjectiveTo evaluate the clinical efficacy and safety of Baoshen prescription in the treatment of stage Ⅳ diabetic nephropathy （DN） in the patients with syndromes of Qi-Yin deficiency and kidney collateral stasis and obstruction， and to explore the mechanism of this prescription delaying the disease progression. MethodsA randomized， controlled， double-blind， multicenter clinical trial was conducted， in which 94 stage Ⅳ DN patients with syndromes of Qi-Yin deficiency and kidney collateral stasis and obstruction were randomly assigned into Baoshen prescription and control groups （47 cases）. The treatment lasted for 12 weeks. The primary efficacy indicators were mainly renal function indexes， including urine albumin-to-creatinine ratio （UACR）， 24-hour urine total protein （24 h-UTP）， serum creatinine （SCr）， and estimated glomerular filtration rate （eGFR）. The secondary efficacy indicators were metabolic memory of hyperglycemia， podocyte epithelial-to-mesenchymal transdifferentiation-related indexes， and TCM syndrome score. ResultsAfter 12 weeks of treatment， the Baoshen prescription group showed lowered levels of advanced glycation end products （lgAGEs）， connective tissue growth factor （CTGF）， type Ⅳ collagen （Col-Ⅳ）， receptor of AGEs （RAGE）， urinary fibroblast-specific protein-1 （FSP-1）， UACR， 24 h-UTP， and glycated hemoglobin （HbAlc） （P<0.05）， and an upward trend of miR-21 mRNA. The control group showed elevated levels of SCr and UREA and lowered levels of urinary FSP-1， eGFR， and HbAlc （P<0.05）. After treatment， the Baoshen prescription group had lower levels of lgAGEs， CTGF， urinary FSP-1， SCr， UACR， and 24 h-UTP and higher levels of Col-Ⅳ and eGFR than the control group （P<0.05）. In addition， the Baoshen prescription group showed statistically significant differences in SCr， eGFR， UACR， and 24 h-UTP before and after treatment （P<0.05）. ConclusionBaoshen prescription can effectively improve the renal function， reduce the urinary protein level， and alleviate clinical symptoms in stage Ⅳ DN patients with syndromes of Qi-Yin deficiency and kidney collateral stasis and obstruction. The mechanism may be related to the metabolic memory of hyperglycemia and epithelial-to-mesenchymal transdifferentiation of podocytes.

OBJECTIVE To evaluate the cost-effectiveness of finerenone combined with standard treatment regimen in the treatment of diabetic nephropathy （DN）. METHODS From the perspective of healthcare service providers， a Markov model was established to simulate the dynamic changes of each stage in DN patients who received finerenone combined with the standard treatment regimen or the standard treatment regimen alone based on the phase Ⅲ clinical trial study of finerenone for DN. Markov model was used to perform the cost-effectiveness of long-term effects and the costs of the two therapies with a simulation cycle of 4 months， a simulation period of 15 years and an annual discount rate of 5%. At the same time， one-way sensitivity analysis and probability sensitivity analysis were performed， and the stability of the results was validated. RESULTS Accumulative cost of the standard treatment regimen was 579 329.54 yuan， and the accumulative utility was 8.052 4 quality-adjusted life year （QALYs）； the accumulative cost of finerenone combined with the standard treatment regimen was 332 520.61 yuan， and the accumulative utility was 8.187 4 QALYs. Finerenone combined with the standard treatment regimen was more cost-effective. The results of one-way sensitivity analysis showed that dialysis status utility value， DN stage 3 utility value and DN stage 4 utility value had a great influence on the incremental cost-effectiveness ratio， but did not affect the robustness of the model. The results of probability sensitivity analysis showed that finerenone combined with the standard treatment regimen was more cost-effective with 100% probability. CONCLUSIONS For DN patients， finerenone combined with the standard treatment regimen is more cost-effective as an absolute advantage option.

It is believed that the head and facial orifices are connected with the brain's spirit and the spirits of the five organs. Their functions， including vision， hearing， smell， taste， and speech， are manifestations of the activity of the spirit. Furthermore， head and facial orifice disorders are interrelated with spirit disorders， forming a cause-and-effect relationship. Acupuncture has a regulatory effect on the spirit. Based on this， acupuncture for regulating the spirit in treating head and facial orifice disorders is proposed. This includes regulating the brain's spirit to treat functional disorders， regulating the heart's spirit to clarify the functions of governing substances， regulating the organ's spirit to benefit the orifices and enhance the communication of the spirit， and regulating the liver's spirit to promote the flow of Qi （气） and relieve stagnation， thereby providing a framework for acupuncture to treat head and facial orifice disorders.

Three-dimensional(3D)printing technology represents an additive manufacturing process wherein computer-aided designs are materialized through the sequential layering of materials by 3D printers, culminating in the formation of complete objects. Since its inception, this technology has found extensive application across various clinical domains, notably enhancing outcomes in surgical assistance. Recently, the utilization of 3D printing in ophthalmic plastic surgery has gained momentum, with researchers conducting numerous valuable explorations into the design of ophthalmic plastic surgeries, the development of surgical fillers for ophthalmic plastic orbital conditions, and the customized design of auxiliary devices for bothoncological and non-oncological lesions. Despite the majority of these studies being confined to the conceptual design phase or limited to case studies, 3D printing technology has demonstrated unparalleled advantages in elevating therapeutic efficacy and surgical precision. To encapsulate the current state and future research directions of 3D printing technology within the realm of ophthalmic plastic surgery, this article aims to review its applications in this field, with the intention of providing a reference for pertinent clinical investigations.

AIM: To delineate the specific mutation responsible for retinitis pigmentosa(RP)in a Yi pedigree, and to analyze the correlation of RHO gene mutation with clinical phenotype.METHODS:A comprehensive clinical evaluation was conducted on the proband diagnosed with RP and other familial members, complemented by a thorough ophthalmic examination. Peripheral blood samples were obtained from the proband and familial members, from which genomic DNA was extracte. Subsequent whole exome sequencing(WES)was employed to identify the variant genes in the proband. The identified variant gene was validated through Sanger sequencing, then an in-depth analysis of the mutation genes was carried out using genetic databases to ascertain the pathogenic mutation sites. Furthermore, an exhaustive analysis was performed to delineate the genotype and phenotype characteristics.RESULTS:The RP pedigree encompasses 5 generations with 42 members, including 19 males and 23 females. A total of 13 cases of RP were identified, consisting of 4 males and 9 females, which conforms to the autosomal dominant inheritance pattern. The clinical features of this family include an early onset age, rapid progression, and a more severe condition. The patients were found to have night blindness around 6 years old, representing the earliest reported case of night blindness in RP families. The retina was manifested by progressive osteocytoid pigmentation of the fundus, a reduced visual field, and significantly decreased or even vanished a and b amplitudes of ERG. The combined results of WES and Sanger sequencing indicated that the proband had a heterozygous missense mutation of the RHO gene c.1040C>T:p.P347L, where the 1 040 base C of cDNA was replaced by T, causing codon 347 to encode leucine instead of proline. Interestingly, this mutation has not been reported in the Chinese population.CONCLUSION:This study confirmed that the mutant gene of RP in a Yi nationality pedigree was RHO(c.1040C>T). This variant leads to the change of codon 347 from encoding proline to encoding leucine, resulting in a severe clinical phenotype among family members. This study provides a certain molecular, clinical, and genetic basis for genetic counseling and gene diagnosis of RHO.

Three-dimensional(3D)printing technology represents an additive manufacturing process wherein computer-aided designs are materialized through the sequential layering of materials by 3D printers, culminating in the formation of complete objects. Since its inception, this technology has found extensive application across various clinical domains, notably enhancing outcomes in surgical assistance. Recently, the utilization of 3D printing in ophthalmic plastic surgery has gained momentum, with researchers conducting numerous valuable explorations into the design of ophthalmic plastic surgeries, the development of surgical fillers for ophthalmic plastic orbital conditions, and the customized design of auxiliary devices for bothoncological and non-oncological lesions. Despite the majority of these studies being confined to the conceptual design phase or limited to case studies, 3D printing technology has demonstrated unparalleled advantages in elevating therapeutic efficacy and surgical precision. To encapsulate the current state and future research directions of 3D printing technology within the realm of ophthalmic plastic surgery, this article aims to review its applications in this field, with the intention of providing a reference for pertinent clinical investigations.