Objective To study the bioequivalence of test and reference olmesartan tablet in Chinese healthy subjects after single dose under fasting and fed conditions.Methods A single-center,random,open,single-dose,two-preparations,double-period,crossover study was adopted.A total of 48 healthy adult male and female subjects(24 cases of fasting test and 24 cases of fed test)were included in the random crossover administration.Single oral dose 20 mg of test and reference were taken under fasting and postprandial conditions,respectively.Plasma concentration of olmesartan in plasma were determined by liquid chromatography tandem mass spectrometry.The main pharmacokinetic parameters were calculated by Phoenix WinNonlin 8.0 software.Results The main pharmacokinetic parameters of the test and reference preparations of olmesartan tablets in the fasting group were as follows:Cmax were(653.06±133.53)and(617.37±151.16)ng·mL-1,AUC0-t were(4 201.18±1 035.21)and(4 087.38±889.99)ng·mL-1·h,AUC0-∞ were(4 254.30±1 058.90)and(4 135.69±905.29)ng·mL-1·h.The main pharmacokinetic parameters of the test and reference preparations of olmesartan tablets in the postprandial group were as follows:Cmax were(574.78±177.05)and(579.98±107.74)ng·mL-1,AUC0-t were(3 288.37±866.06)and(3 181.51±801.06)ng·mL-1·h,AUC0-∞ were(3 326.11±874.26)and(3 242.01±823.09)ng·mL-1·h.Under fasting and postprandial conditions,the 90％confidence intervals of the main pharmacokinetic parameters of the test and reference preparations are both 80.00％-125.00％.Conclusion Under fasting and postprandial conditions,a single oral dose of test and reference preparations olmesartan tablets in Chinese healthy adult volunteers showed bioequivalence.

An electrochemical chemical oxygen demand(COD)sensor was proposed based on a FTO/TiO2/PbO2 electrode and a thin-layer electrochemical cell.The FTO/TiO2/PbO2 electrode was characterized by X-ray photoelectronic spectroscopy(XPS),X-ray diffraction(XRD)spectroscopy and electrochemical technique,and the results indicated that the rapid decrease in the output signals of the electrochemical COD sensor could be attributed to oxidation of PbSO4 occurring on the surface of FTO/TiO2/PbO2 electrode.The PbO2 deposition time and concentration of Na2SO4 were further optimized and then the electrochemical COD sensor was challenged by real samples including laker water sample,river water sample and wastewater sample.The evolution trend of signals of the electrochemical COD sensor in response to lake and river water samples was identical with that obtained with the standard method(HJ/T399-2007,Water quality-determination of the chemical oxygen demand-fast digestion-spectrophotometric method).The electrochemical COD sensor exhibited significant increase in the signal intensity after the samples were switched from lake water to wastewater sample,and a mean value of 32.5 mg/L with relative standard deviation(RSD)of 6.8%were obtained after measuring 45 times the wastewater with COD value of 30 mg/L under a sampling interval of 400 s.The as-prepared electrochemical COD sensor possessed good promise in regular monitoring of COD,discharge of wastewater and industrial process control,with advantages such as a small sampling interval,mild reaction conditions and no requirement of toxic and harmful chemical reagents.

The analysis of nano-micro nuclear particles has attracted significant attention due to the crucial role of their elemental and isotopic characteristics in tracing the origins of particulate matter and assessing its potential risks to human health and the environment.However,challenges persist in obtaining accurate and consistent element profiles and ratios for small-sized nanoparticles due to their low level and the transient nature.In this study,a high-speed digital oscilloscope was integrated with multiple collector inductively coupled plasma mass spectrometry(MC-ICP-MS)to develop a high time-resolution"Event-triggered signal capture"(ETSC)system for single particle analysis.This innovative approach enabled the analysis of element/isotope within rare earth nanoparticles at ag-fg level.The ETSC accurately recorded the complete profile of single particle,event captured by the electron multiplier with nanosecond time resolution,allowing for high-sensitivity element analysis and high-precision isotope analysis of single particles.The results demonstrated that the ETSC system could achieve quantitative analysis of ag levels of ytterbium(Yb)in 50-nm rare earth-doped particles,with a detection limit as low as 38 ag for Yb.Moreover,the isotopic precision of single particle analysis for 173/171Yb could reach 0.047(standard deviation),and the standard error for isotopic analysis of multiple particles could achieve a level of 2‰-3‰(permil)for 173/171Yb.Finally,the capability of ETSC system to analyze environmental samples was demonstrated through the analysis of doped ytterbium oxide nanoparticles.All these findings demonstrated that the ETSC provided a unique method for elemental and isotopic analysis of single nuclear particles.

Objective To propose a Q factor-based fatigue vibration evaluation method of the ultrasonic knife tip.Methods Firstly,an ultrasonic cutter fatigue testing table was established to realize repeated cutting,which was composed of a power supply module,a three-axis moving module,an ultrasonic cutter clamping module and a control module.Secondly,10 ultrasonic knives of some brand underwent fatigue testing with the table,during which non-contact measurement of the ultrasonic knife tip vibration was carried out and the Q factors were calculated at the five periods of the fatigue test,including the periods before cutting,after 500 times of cutting,after 1 000 times of cutting,after 2 000 times of cutting and after 3 000 times of cutting.Finally,the average cutting speed and burst pressure for coagulated vessels were computed at each period to validata the effectiveness of the method proposed.Results It's indicated that Q factor could effectively reflect the fatigue degradation of the ultrasonic knife tip,while the average cutting speed and burst pressure for coagulated vessels were difficult to efficiently evaluate the fatigue degradation level of the ultrasonic knife tip due to the uncertainty factors in the measurement process.Conclusion The proposed Q factor-based evaluation method can directly evaluate fatigue vibration of the ultrasonic knife tip in an accurate and quantitative manner.[Chinese Medical Equipment Journal,2024,45(6):17-22]

Objective To carry out accurate quantative evaluation of MRI scanning noise based on laser vibrometry technology.Methods Skull and spine MRI was performed with mute and conventional sequences.A laser vibrometry device was used to sample the surface vibration noise at the outer edge of the inspection hole of MRI system according to GB/T 16539-1996 Acoustics—Determination of sound power levels of noise sources using vibration velocity—Measurement for seal machinery,and the indicators of sound power level,sound pressure level and perceived noise level obtained by the three calculation methods(LPN1,LPN2 and LPN3)were analyzed with some dedicated MRI noise analysis software.Results The peak sound pressure levels for conventional and mute sequences of skull scanning were 81 and 63 dB(A),respectively,and mute sequence reduced the noise level significantly;the peak sound pressure levels for conventional and mute sequences of spine scanning were 79 and 75 dB(A),respectively,and the noise reduction level was significantly lower than that of skull scanning.Significant differences in noise reduction were not found in spine scanning sequences,while were found in skull scanning sequences.During spine and skull scanning LPN1,LPN2 and LPN3 obtained by the three calculation methods of conventional and mute sequences were all higher than the overall sound power and overall pressure levels obviously.Conclusion Mute sequence can not realize linear noise reduction for the whole frequency band,the perceived noise of the human ear during MRI scanning is related directly to the scanning sequence,and there may be some bias when only one physical indicator is involved in the noise evaluation of MRI system.[Chinese Medical Equipment Journal,2024,45(10):20-24]

Objective The objective of this study is to examine the expression level of the S100A7A protein in both gastric cancer tissues and cells,as well as to evaluate its impact on the malignant phenotype of gastric cancer(GC)cells.Methods Immunohistochemical assay was used to detect the expression characteristics of S100A7A in 21 gastric cancer tissues and their corresponding paracancerous tissues,as well as to investigate its correlation with gastric cancer clinicopathological factors.Gastric cancer cells were genetically modified to overex-press S100A7A through plasmid transfection.Subsequently,the impact of S100A7A on the proliferation,migra-tion,and invasion capacities of gastric cancer cells was assessed using cell proliferation assays(EdU assay and plate cloning assay)as well as cell migration and invasion assays(Transwell assay and scratch assay).Results The expression of S100A7A protein was higher in GC tissues than in paracancerous tissues;Overexpression of S100A7A may increase gastric cancer cell proliferation,migration,and invasion.Conclusion S100A7A is a possible oncogene in GC and is predicted to serve as a new diagnostic and therapeutic target for the disease.

Objective To analyze the incidence and mortality of malignant tumors among the middle-aged and elderly population in Chengguan district of Lanzhou from 2011 to 2021,and to discuss the related risk factors.Methods Using the research data of REACTION in Lanzhou,an epidemiological survey was conducted through cluster sampling in three communities in Chengguan district of Lanzhou since April 2011.The target population was middle-aged and elderly residents over 40 years old.Two follow-up surveys were carried out in 2014-2016 and 2021 successively,and 6543 people with complete follow-up data were finally included.The incidence and mortality rates of malignant tumors were calculated,as well as their age standardized rates with reference to the age composition of Segi's world standard population.Multivariate Cox regression analysis was used to screen the risk factors affecting the incidence and mortality of malignant tumors.Results After an average follow-up of 10.6 years,314 new cases of malignant tumors were found in middle-aged and elderly residents in Chengguan district of Lanzhou,with an incidence rate and age standardized incidence rate of 454.30/100 000 and 128.93/100 000,respectively.A total of 158 deaths were attributed to malignant tumors,with a mortality rate and age standardized rate of 228.41/100 000 and 607.9/100 000,respectively;The age standardized incidence rate and mortality rate of malignant tumors males were both higher than those females(P＜0.05).During the follow-up period,the age standardized incidence rate of malignant tumors in the general population showed an significant upward trend(P＜0.05),whereas the age standardized mortality rate gradually decreased after a brief increase(P＜0.05).Lung cancer,colorectal cancer,gastric cancer,and liver cancer were the main types of malignant tumors ranking in the top five in terms of incidence and mortality by gender.Multivariate Cox regression results indicate that male,age≥60 years old,college education level or above,smoking history,drinking history,having been hit by major stressful events,central obesity,hypertension,and coronary heart disease are risk factors for the onset or death of malignant tumors(HR＞1).Married,with family size≥4,frequent consumption of fresh fruit,frequent consumption of fresh vegetables,frequent consumption of grains and tubers are protective factors for the onset or death of malignant tumors(HR＜1).Conclusion The incidence of malignant tumors among middle-aged and elderly people in Chengguan district of Lanzhou from 2011 to 2021 showed an increasing trend,while the overall mortality was decreasing.Our study indicates early cancer screening in elderly populations,maintaining a healthy lifestyle and strengthening the management of chronic diseases are crucial for the prevention and treatment of malignant tumors.

Objective To study the in vitro expression of three phenylalanine hydroxylase(PAH)mutants(p.R243Q,p.R241C,and p.Y356X)and determine their pathogenicity.Methods Bioinformatics techniques were used to predict the impact of PAH mutants on the structure and function of PAH protein.Corresponding mutant plasmids of PAH were constructed and expressed in HEK293T cells.Quantitative reverse transcription polymerase chain reaction was used to measure the mRNA expression levels of the three PAH mutants,and their protein levels were assessed using Western blot and enzyme-linked immunosorbent assay.Results Bioinformatics analysis predicted that all three mutants were pathogenic.The mRNA expression levels of the p.R243Q and p.R241C mutants in HEK293T cells were similar to the mRNA expression level of the wild-type control(P>0.05),while the mRNA expression level of the p.Y356X mutant significantly decreased(P<0.05).The PAH protein expression levels of all three mutants were significantly reduced compared to the wild-type control(P<0.05).The extracellular concentration of PAH protein was reduced in the p.R241C and p.Y356X mutants compared to the wild-type control(P<0.05),while there was no significant difference between the p.R243Q mutant and the wild type control(P>0.05).Conclusions p.R243Q,p.R241C and p.Y356X mutants lead to reduced expression levels of PAH protein in eukaryotic cells,with p.R241C and p.Y356X mutants also affecting the function of PAH protein.These three PAH mutants are to be pathogenic.[Chinese Journal of Contemporary Pediatrics,2024,26(2):188-193]

Patients with severe trauma require an extremely timely treatment and transfusion plays an irreplaceable role in the emergency treatment of such patients. An increasing number of evidence-based medicinal evidences and clinical practices suggest that patients with severe traumatic bleeding benefit from early transfusion of low-titer group O whole blood or hemostatic resuscitation with red blood cells, plasma and platelet of a balanced ratio. However, the current domestic mode of blood supply cannot fully meet the requirements of timely and effective blood transfusion for emergency treatment of patients with severe trauma in clinical practice. In order to solve the key problems in blood supply and blood transfusion strategies for emergency treatment of severe trauma, Branch of Clinical Transfusion Medicine of Chinese Medical Association, Group for Trauma Emergency Care and Multiple Injuries of Trauma Branch of Chinese Medical Association, Young Scholar Group of Disaster Medicine Branch of Chinese Medical Association organized domestic experts of blood transfusion medicine and trauma treatment to jointly formulate Chinese expert consensus on blood support mode and blood transfusion strategies for emergency treatment of severe trauma patients ( version 2024). Based on the evidence-based medical evidence and Delphi method of expert consultation and voting, 10 recommendations were put forward from two aspects of blood support mode and transfusion strategies, aiming to provide a reference for transfusion resuscitation in the emergency treatment of severe trauma and further improve the success rate of treatment of patients with severe trauma.

The National Disease Control and Prevention Bureau and the National Health Commission jointly issued an announcement on Notice on Carrying out Pilot Work of Occupational Health Classification Supervision and Law Enforcement, which presented a method of comprehensive risk assessment method of occupational disease hazards of employers. This method embraces relevant factors at full scale and is simple in operation, but its applicability and accuracy of assessment results need further practical study. Based on the steps of occupational health risk assessment and proven occupational health risk assessment methods available at home and abroad, this paper proposed improvements and discussed the comprehensive risk assessment method of occupational disease hazards of employers, so as to provide a technical basis to implement the occupational disease hazard classification management of employers for relevant government supervision departments.